Latest sand filling Tenders | Government sand filling Tenders

State Government

CTN :39373998

07 Mar, 2025 33.63 Lacs

Sangrur - Punjab

Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix

State Government

CTN :39411030

25 Feb, 2025 NA

Mandi - Himachal Pradesh

Tender For restoration of rain damages on chandyal to chatru via sishal trambi road km 00 to 60 (sh providing and filling selected soil in road stretch at rd 0/023 to 0/039)

State Government

CTN :39411045

25 Feb, 2025 NA

Mandi - Himachal Pradesh

Tender For restoration of rain damages on chandyal to chatru via sishal trambi road km 0/0 to 6/0 (sh: providing and filling selected soil in road stretch at rd 0/039 to 0/055)

State Government

CTN :39410231

25 Feb, 2025 1.98 Lacs

Siwana - Rajasthan

Tender For sand filling work in village populated area

Central Government/Public Sector

CTN :39171274

26 Feb, 2025 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : provision of pillar upto 1.5 height for demarcation of defence land at hirakund - excavation in post hole (or similar hole) each n exc 0.50 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n. exc 25 cm etc and getting out soft/ loose soil complete all as specified and directed, m & l for providing precast cement concrete, type b-1 1:2:4 (using 20 mm graded mechanically graded stone aggregates) in win- dow or door cills, lintels, bressumers, steps,quoin blocks (foruse with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin).corbels, brackets,etc. (of any section indicated), with plain fair faces,including chamfers, weatherings,throat- ing etc. and setting in mortar(1:4)complete with joints to match all as specified and directed., m&l for pcc 1:3:6 type d2 using 40 mm graded stone aggregate as in foundation filing and mass concrete., m&l for mild deformed tmt steel bars 10mm dia and over, cut to lenght, bent to shape required, including crandking, bending spirally for hooping fro columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed, ditto, above but 5mm and over upto and including 10mm dia in stirrups, spacers and binders, removing excavated material(soils) n exc 50 and desposting where directed at a level n exc 1.5 at a level n exc 1.5m above starting point complete all as specified and directed by eng in charge., s&f for mild steel work as in posts and struts etc in fencing including cutting tops to shapes as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to fe-290 gde e-165 complete all as specified, m & l for writing letter or figured (block, roman, italic or indian) over base coat n exc 30 cm height with synthetic enamel paint complete all as specified and directed., m&l for preparation of newly untreated steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer exc 10 cm width or girth, not otherwise described complete all as specified and directed., mild steel of thickness 0.63mm , plain, blacksheet in wall cladding,steel gates and similarwork, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

Central Government And Public Sector

CTN :39384664

11 Mar, 2025 NA

Chittorgarh - Rajasthan

Tender For supply of optical fibre laying for oesc-, 40/33 plb hdpe pipe as per attached specification., optical junction box (compatible with 6 pair ofc) as per attached specification., metal jb (3*3 feet size) as per attached specification., gi conduit (32mm) as per attached specification., layer -2 switch (compatible with 6 pair ofc cable) as per attached specification., media convertor as per attached specification., fiber patch panel/liu with 24 ports loaded as per attached specification., cable tray for 6 pair optical cable size 90*30*30*3(mm) as per attached specification., single mode pigtail fiber cable (sc type) as per attached specification., single mode fiber patch cord (2 mtr. lc-lc type) as per attached specification., single mode fiber patch cord (2 mtr. sc-lc type) as per attached specification., otdr (for fault location) as per attached specification., splicing machine as per attached specification., making trench in hard soil /road cutting to a depth of 300 mm (for laying of gi conduits and cables inside conduits) making trench by digging in hard soil/ road cutting and normalizing the same. hard soil digging of 300mm (w)x 600mm (d), filling of the same with river sand of 50mm, direct burial of armoured cable and hdpe conduit, protecting the cables/conduits using bricks on three sides, covering the bricks with river sand and back filling the remaining portion with the soil to the ground level, wherever the road cutting is made the cables and conduits shall be laid in the 2"/1.5"/1" gi conduit. the top portion of the pit shall be normalized to the ground level with m20 grade pcc (refer annexure-2 laying of ofc cable from unit to oesc for details)., digging (0.5 meter) and the top portion of the pit shall be normalized to the ground level with m20 grade pcc. for finishing this job-related items and manpower are in bidder scope and supplied by bidder in free of cost (refer annexure-2 laying of ofc cable from unit to oesc for details)., laying of 4 pair and 5 pair armoured cable parallelly, in trench and outside trench (as per enclosed scope of work) and instruction as per site in charge. all accessories for cable layout in trench or outside trench are supplied by bidder in free of cost and scope of bidder (refer annexure-2 laying of ofc cable from unit to oesc for details)., ,

CTN :39130840

20 Feb, 2025 NA

Jaipur - Rajasthan

Tender For bid to ras supply of iron frame and acp ss letters , floodlight 100 w , led bulb 9 watt , flowers and plants , construction of 30 flower beds and sand filling