Latest scour valve Tenders | Government scour valve Tenders

State Government

CTN :43286365

29 Dec, 2025 13.53 Lacs

Multi City - Karnataka

Tender For tender for the work of construction of new solid concrete blocks cistern with rcc slabs and providing, fabricating, laying of ms lead off including necessary earth excavation for scour valve at ch- no.51.680km of 4th stage phase-i, 6th and 7th reach under jurisdiction of aee(k-o&m)-2-1 at harohalli. (reserved for sc category only-short time tender)

State Government

CTN :43286405

29 Dec, 2025 15.85 Lacs

Multi City - Karnataka

Tender For tender for the work of construction of rcc cistern with ceiling and providing, fabricating, laying of ms lead off including necessary earth work across the existing 5th stage transmission line of ch-no.42.000 of 4th stage phase-i and phase-ii for scour valve, near girenahalli under jurisdiction of aee(k-o&m)-2-1 at harohalli. (reserved for st category only-short time tender)

corporations/Associations/Others

CTN :43287647

05 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For ttps operation circle mpm i unit i complete dismantling of mill 1f and reassembling the dismantled spares in mill 1b - draining of mill gearbox oil completely, cleaning the gearbox internals like worm shafts and worms wheel. after inspection filling the gearbox with new/old oil including devolution of old oil to stores etc, (department vehicle will be provided for drawl of oil at free of cost)., charges for dismantling the gear coupling bolts, gear coupling (worm shaft only), distance piece, unscrewing the worm shaft extension cover bolts and bearing housing cover bolts, removing the worm shaft extension cover, lowering to ground floor, releasing the worm shaft assembly from its position and assemblies providing back the overhauled worm shaft assembly in the gear box and fitting back the worm shaft extension cover, bolting and tightening the bolts to the required torque level and assembling back the gear coupling bolts, distance piece etc., charges for dismantling the worn out rubber element in the mill motor coupling, cleaning inspection and replacement of new rubber element and checking the tightness of coupling including cost of consumables etc.,, charges for dismantling the spool pieces, multiple port outlet bodies and transition pipes 4 nos. each after assembling the coal pipe inspection with center feed pipe structures., charges for removal of orifice 1 no. after dismantling the victaulic coupling., charges for removal of mill journal doors including lead, lift and transporting of materials fromstores and devolution of scraps from site to stores and cost of consumables such as welding electrodes, gas, cotton waste etc.,, charges for removal of journal with trunnion assembly in the mills including lead, lift and transporting of materials from mill repair bay to mill floor and back, devolution of scrap to stores and cost of consumables such as welding rod, cutting gas, cotton waste etc., charges for changing of bowl extension ring (6 nos) per mill including lead, lift and transporting of materials from stores to mill floor and back, charges for dismantling of lube oil cooler, from lube oil system, cleaning, flushing the cooler, oil pipe lines, water pipe lines, oil separator tank, checking of water lines, valves and nipples., charges for providing wedges between lower skirt and mill insulation cover plate firmly, removal of gearbox bottom cover flange bolts, lowering the thrust bearing and pump housing after supporting lower radial bearing housing. lowering the thrust bearings and reassembling of all the above parts, charges for lifting the vertical shaft along with worm gear and worm wheel from top of the gear box and place it in stand. dismantling the worm wheel hub lock nut and removal of worm wheel from the worm hub by steam/induction heating. inspection of upper redial bearing and renewal if necessary., charges for dismantling and removing worn out thrust bearing of mill vertical shaft by gas heating the racer, cleaning the bearing seating area in the vertical shaft., charges for removing the thrust bearing adopter (worn out) and assembling the new adopter by heating, charges for removal of seperator body along with classifier assembly. inner cone mill outlet plate and venturi dismantling the air inlet housing after segregating from hot air duct placing in appropriate place. dismantling the bowl with bowl hub and separating the bowl hub from bowl and in filling the same., charges for dismantling of upper skirt assembly, lower skirt assembly, mechanical face seal assembly, dust guard and blue matching of seal runner, renewal of seal( bronze), air seal, dismantling of mill bottom cover, upper bearing housing cover, oil seals etc.,, charges for dismantling the triangular liners, cutting the bulged mill bottom plate, applying refractory cement at the mill bottom plate 1 set by providing bolts and welding., charges for dismantling the radial bearing after removing the oil pump hub and oil pump bushing., charges for changin

corporations/Associations/Others

CTN :43287648

05 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For ttps operation circle mpm i unit i complete dismantling of mill 2f and reassembling the dismantled spares in mill 1c - draining of mill gearbox oil completely, cleaning the gearbox internals like worm shafts and worms wheel. after inspection filling the gearbox with new/old oil including devolution of old oil to stores etc, (department vehicle will be provided for drawl of oil at free of cost)., charges for dismantling the gear coupling bolts, gear coupling (worm shaft only), distance piece, unscrewing the worm shaft extension cover bolts and bearing housing cover bolts, removing the worm shaft extension cover, lowering to ground floor, releasing the worm shaft assembly from its position and assemblies providing back the overhauled worm shaft assembly in the gear box and fitting back the worm shaft extension cover, bolting and tightening the bolts to the required torque level and assembling back the gear coupling bolts, distance piece etc., charges for dismantling the worn out rubber element in the mill motor coupling, cleaning inspection and replacement of new rubber element and checking the tightness of coupling including cost of consumables etc.,, charges for dismantling the spool pieces, multiple port outlet bodies and transition pipes 4 nos. each after assembling the coal pipe inspection with center feed pipe structures., charges for removal of orifice 1 no. after dismantling the victaulic coupling., charges for removal of mill journal doors including lead, lift and transporting of materials fromstores and devolution of scraps from site to stores and cost of consumables such as welding electrodes, gas, cotton waste etc.,, charges for removal of journal with trunnion assembly in the mills including lead, lift and transporting of materials from mill repair bay to mill floor and back, devolution of scrap to stores and cost of consumables such as welding rod, cutting gas, cotton waste etc., charges for changing of bowl extension ring (6 nos) per mill including lead, lift and transporting of materials from stores to mill floor and back, charges for dismantling of lube oil cooler, from lube oil system, cleaning, flushing the cooler, oil pipe lines, water pipe lines, oil separator tank, checking of water lines, valves and nipples., charges for providing wedges between lower skirt and mill insulation cover plate firmly, removal of gearbox bottom cover flange bolts, lowering the thrust bearing and pump housing after supporting lower radial bearing housing. lowering the thrust bearings and reassembling of all the above parts, charges for lifting the vertical shaft along with worm gear and worm wheel from top of the gear box and place it in stand. dismantling the worm wheel hub lock nut and removal of worm wheel from the worm hub by steam/induction heating. inspection of upper redial bearing and renewal if necessary., charges for dismantling and removing worn out thrust bearing of mill vertical shaft by gas heating the racer, cleaning the bearing seating area in the vertical shaft., charges for removing the thrust bearing adopter (worn out) and assembling the new adopter by heating, charges for removal of seperator body along with classifier assembly. inner cone mill outlet plate and venturi dismantling the air inlet housing after segregating from hot air duct placing in appropriate place. dismantling the bowl with bowl hub and separating the bowl hub from bowl and in filling the same., charges for dismantling of upper skirt assembly, lower skirt assembly, mechanical face seal assembly, dust guard and blue matching of seal runner, renewal of seal( bronze), air seal, dismantling of mill bottom cover, upper bearing housing cover, oil seals etc.,, charges for dismantling the triangular liners, cutting the bulged mill bottom plate, applying refractory cement at the mill bottom plate 1 set by providing bolts and welding., charges for dismantling the radial bearing after removing the oil pump hub and oil pump bushing., charges for changin

Central Government/Public Sector

CTN :43296068

12 Jan, 2026 26.00 Lacs

Aurangabad-Mh - Maharashtra

Tender For repair / replacement of external water supply distribution gi/di/ci lines, control valves and allied e/m works at chh sambhajinagar mil station under ge (south) ahilyanagar

Central Government/Public Sector

CTN :43318616

14 Jan, 2026 10.00 Lacs

Lansdowne - Uttarakhand

Tender For repair replacement of water tanks, float valves, water tank lid, gi tube and connected items at lansdowne.

Central Government/Public Sector

CTN :43327012

29 Dec, 2025 NA

Angul - Odisha

Tender For in-situ repair of boiler main steam stop valves

CTN :43205461

30 Dec, 2025 216

Multi City - Karnataka

Tender For amount reserved for the purchase and maintenance of street lighting equipment for all villages in phalavanahalli village andpurchasing spare parts for drinking water equipment within the limits of phalavanahalli gram panchayat for the year 2025-26 from the fifteenth finance amount - screw driver --all gps, single pole mcb --all gps, mcb 2 pole --all gps, mcb 3 pole --all gps, mcb 4 pole --all gps, street light off and on handle switch 32a--all gps, flood light 250 w--all gps, flood light 150 w --all gps, flood light 100 w --all gps, led set 100 w --all gps, plastic bulbs cover --all gps, led set 30 w --all gps, led set 50 w --all gps, led bulb 24 w --all gps, led bulb 20 w --all gps, led bulb 18 w --all gps, pvc pipes 6kg 40 mm/all gps, p v c pipes 63 mm 4kg/all gps, solvents gum 100 ml/all gps, repair collers 75 mm/all gps, repair coller 63 mm/all gps, fiting chrgs --all gps, ssntex panel board 12bs18 --all gps, spn 32amcb --all gps, fm1q timer --all gps, contactor 32 a --all gps, bulb led 15 w--all gps, bulb led 12 w --all gps, stret bend pipe --all gps, stret clamp --all gps, c f l holdr --all gps, c g holdr --all gps, tester --all gps, cutting plaser --all gps, copperwire coil 1 point 0 mm --all gps, alluminium coil 6 point0mm --all gps, alluminium coil 4 point 0mm --all gps, copperwire coil 2 point 5mm --all gps, wonder tape role --all gps, ceiling fan --all gps, dp switch --all gps, shallac/all gps, pvc elbows thread 75 multiples 63 mm/all gps , g i bends isi 50 mm/all gps , g i nipples 50 multiple 12 mm/all gps, gi collers heavs 50 mm/all gps , ci top & bottom adopters 50mm/all gps , column pipes 50mm/all gps , g i nipple h 50 multiples 6/all gps, trangel ball valves 50 mm/all gps , moter 7.5 h p 12 stg/all gps, aluminium coil 300ft 10 mm/all gps , heavs clamps double nut bolt 2/all gps, panels box big/all gps, sub cable 4 point 0 sq mm all gps , pvc services shaddal 63/all gps multiples 25 mm/all gps , spanners 22 mm/all gps , pvc tees 75 mm 6kg/all gps, no-volt coils/all gps, pvc elbows 75 mm 6kg/all gps, relass 20-32 ams/all gps, pvc pipes 75mm 4kg/all gps, meet ball valve planes 65 mm/all gps, solvent gums 500 ml/all gps , pvc elbows 63 mm 6kg-/all gps, ball vale pvc pipes 63 mm/all gps, reapere collers 90 mm/all gps, ftas pvc 90 mm/all gps , pvc collers 90 mm/all gps , pvc collers 75 mm/all gps, g i elbows 50 mm isi/all gps, preventers sp2/all gps , motor panel boards/all gps, m t as pvc 63 mm/all gps, fuses 100 amps/all gps, flanzs 110 mm/all gps , preventers sp 3/all gps, auto starters/all gps, gi pipes 50 mm/all gps , sub cables 2.5 sq mm/all gps, bolt nuts 12 mm/all gps , stand assemblss/all gps, g i b nipples 20 multiple 24/all gps, g i b nippes h 20 multiple 12/all gps, g i collers 20 mm/all gps , taper cock 20 mm/all gps , pvc shaddles 75 multiple 25 mm/all gps , axel blades/all gps, air valve/all gps, aluminiums coil 1000 feet 10 mm/all gps , bore cap 2 multiple 10/all gps, g i collers 20 mm/all gpsa , g i elbows 20 mm/all gps , g i nipple 6 inchs 20 mm/all gps , gi nipple 12 inchs 20 mm/all gps , g i nipple 18 inchs 20 mm/all gps , g i nippl 20 mm 2 feets/all gps , pvc ball valves 25 mm/all gps , pvc ball valves 20 mm/all gps , pvc ball valves 75 mm/all gps , pvc collers 25 mm 8kg/all gps , pvc couplers 90 mm 4kg/all gps , g i collers 50 mm/all gps , pvc r f t as 75x63 mm/all gps , s l valves 65 mm/all gps , pvc ball valves 40 mm/all gps , pvc m t as 90 mm 6kg/all gps , pvc thread elbows 90x75 mm/all gps , ball valve planes 110 mm pvc/all gps , pvc tees 90 mm 6kg/all gps, pvc elbows 90 mm 6kg/all gps, pvc end caps 63 mm 6kg/all gps, f t a pvcs 63 mm/all gps , pvc elbows 75 mm 6kg/all gps , l & t s j imlet starters/all gps, reapere collers 110 mm/all gps , g i nipples 6 inch 50 mm/all gps , g i elbows 50 mm/all gps , pvc pipes 15 mm/all gps , pvc pipes 25 mm/all gps , g i nippl 18inchs 50 mm/all gps , pvc ball valves 90 mm/all gps , pvc ftas 75 mm/all gps , pvc ftas 63 mm/all gps , pvc rmta 75 multi

State Government

CTN :43317018

05 Jan, 2026 11.92 Lacs

Solan - Himachal Pradesh

Tender For sh providing, laying and jointing of mserw 200mm dia pipe line and laying/ jointing of gms pipe of 65mm dia and providing and fixing scour valves at different rds

CTN :43267906

24 Dec, 2025 45.83 Lacs

Ganganagar - Rajasthan

Tender For repair , reconditioning (insitu) of hp valves of boiler and turbine area and online pressure setting of boiler safety valves for unit 1to 6 at sstps, rvun ,suratgarh

Scour Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors