Latest sealing pin Tenders | Government sealing pin Tenders

Central Government/Public Sector

CTN :39622524

17 Apr, 2025 25.49 Lacs

Varanasi - Uttar Pradesh

Tender For bid to ras supply of anchor shackle - anchor shackle hw-605.14 hwr matl. code- w97312006191 , load shackle hw-608.08 -- as per drg. 31209856003 rev.01 hwr matl. code-w97312098010 , load shackle m48 hw-613.05 -- as per drg.no. 31074056137 rev-03 var.07 hwr matl. code- w97310740190 , load shackle m36 hw-630.08 vlbg- 8000kg-m36x140 -- as per drg.no. 31074056137 rev-03 var.05 hwr matl. code-w97310740173 , load shackle m12 hw-634.26 vlbg-1000kg-m12x50 -- as per drg.no.31074056137 rev-03 var.00 hwr matl. code- w97310740122 , load shackle m16 hw-634.27 -- as per drg.no.31074056137 rev-03 var.01 hwr matl. code- w97310740130 , load shackle m24 hw-634.29 vlbg- 4000kg-m24x80 -- as per drg.no.31074056137 rev-03 var.03 hwr matl. code-w97310740157 , swivel eyebolt m36 hw-635.05 --as per drg. 31060158001 rev- 02 var-00 hwr matl. code-w97312087035 , swivel eyebolt m42 hw-635.06 --as per drg. 31060158001 rev- 02 var-01 hwr matl. code-w97312087043 , load shackle hw-635.07 vlbg-300kg-m8x40 -- as per drg.no.31074056137 rev-03 var.08 hwr matl. code- w97312087019 , load shackle hw-635.08 vlbg-630kg- m10x45 -- as per drg.no.31074056137 rev-03 var.09 hwr matl. code-w97312087027 , lifting ring hw- 637.05 -- fully m cd as per drg.no.41200456006 rev.01 hwr matl. code-w97312004059 , anchor shackle dee- shackle hw-639.21 -- as per drg.no.31200658001 rev- 01 var.07 having w.l.l.m.t of 12 hwr matl. code- w97312006183 , dee shackle hw-658.19.08 --- having working load limit 2 tons, grade-6 as per en13889 alloy steel d-shackles with screw pin,wll 2 ton hwr material code-w97312027512 , load shackle hw- 659.08 -- as per drg. 31204430307 rev.00 hwr matl. code-w97312044018 , load shackle m42 var.06 hw- 630.03 -- as per drg. 31074056137 rev.02 hwr matl. code-w97310740181

Central Government And Public Sector

CTN :40025107

06 May, 2025 16.81 Lacs

Bandipora - Jammu And Kashmir

Tender For tender for supply of lifting tools for kishanganga power station minimum average annual turnover - motorised chain pulley block , capacity-05 ton , lift-25 meter , motorised chain pulley block , capacity 03 ton , lift-06 mtr. , chain pulley block 10 ton with 10m lift , chain pulley block , capacity-05 ton , lift-12 mtr. , chain pulley block , capacity 03 ton , lift-06 mtr , chain pulley block , capacity 02 ton , lift-06 mtr , webbing sling with eye on both sided width 250 mm length 8 mtr , 10 ton , webbing sling with eye on both sided width 150 mm length 8 mtr , 08 ton , webbing sling with eye on both sided width 150 mm length 4 mtr , 05 ton , webbing sling with eye on both sided width 100 mm length 4 mtr , 03 ton , webbing sling with eye on both sided width 100 mm length 4 mtr , 02 ton , polyster endless round sling 10 ton capacity , 6 mtr. effective length(12 mtr. circumferential length) , polyster endless round sling 08 ton capacity , 6 mtr. effective length(12 mtr. circumferential length) , polyster endless round sling 05 ton capacity , 6 mtr. effective length(12 mtr. circumferential length) , steel wire rope with eye on both sides , dia-6 mm , length-3 meter , steel wire rope with eye on both sides , dia-12 mm , length-5 meter , steel wire rope with eye on both sides , dia-20 mm , length-5 meter , steel wire rope with eye on both sides , dia-24 mm , length-6 meter , steel wire rope with eye on both sides , dia-32 mm , length-6 meter , eye bolt m-8 , eye bolt m-10 , eye bolt m-12 , eye bolt m-16 , eye bolt m-20 , eye bolt m-24 , eye bolt m-30 , eye bolt m-36 , d-shackle 1/2 ton , screw pin chain type , alloy steel d- shackle-1 tonne , alloy steel d- shackle-2 tonne , d-shackle 5 ton , screw pin chain type , d-shackle 10 ton , 4 leg chain sling , 3 mtr. effective length , capacity-20 ton , master link dia.- 200 mm

CTN :40008388

25 Apr, 2025 NA

Udhampur - Jammu And Kashmir

Tender For procurement of mt spares - mg spares part :, bolt, bolt frt hood hinge, bolt, bolt, bolt no 2, screw, screw, screw, screw, screw, screw, screw, screw, pin, ball, ball, ball case, nut, nut, nut, washer, lock washer, key, bolt no 2(8x120), bolt (10x18.5 ), bolt no 1 (8x100), screw, bolt lever locating (10x18.4), nut, nut rh, nut lh, nut, nut, thrust washer no.3 (t. o.8), thrust washer no 2(t 0.7), thrust washer no 1(t 0.6), thrust washer no.2 (t :1.0), thrust washer no 3(t:1.1), thrust washer no1 (t :0.9), (deleted) lock washer, washer, thrust washer, washer, washer t/m oil level plug, gasket, gasket, spacer (8x12x15), spacer, shim (t.1.15), shim (t-1.18), shim (t.1.21), shim (t.0.30), spring pin reduction frok, pin, spring pin gear, plug oil filter, plug oil level, plug, cap choke cable, plug timing belt outside cover, roller shaft sft interlock, bearing frt wheel, o ring, o ring distributor case, o ring guide oil level gauge, o ring, o ring oil strainer, o ring, oil seal, oil seal, oil seal, seal valve stem, bush, bush sprg shackle, cushion front, cushion case, hose water by pass, circlip axle shaft, circlip main shaft rr, circlip, e ring, clip heater hose, clamp, clamp heater hose, spring inner, spring outer, spring select return, spring axle housing breat, absorber assy rear shock, absorber assy front shock, spring, spring, bulb (12v 3.4w), bulb(12v 1.4w), bulb turn signal (12v 21w), bulb 12v 21/5w, bulb (12v 5w), bearing input shaft, pully crank timing belt, tensioner comp timing belt, gangue water temperature, gauge assy water temp, head lamp assy, lamp assy fornt fog, lamp assy comb rh, boot lever no1, shaft input, shim input shaft (t:0 3), gear counter, shaft counter, retainer output shaft, shim output shaft (t:0.1), shim output shaft (th:0.3), support open spring, latch assy front door rh, latch assy door rh, (deleted) latch assy front door lh, latch assy door lh, handle lock, cover gate handle, stricker lock, spacer, handle inside rh, handle inside lh, regulator assy frt dr window lh, joint rubber, bush column, rubber seal, dumper assy steering, connector tie rod end, tie rod steering, (deleted) rod assy steering drag, pad, (deleted) piston/cup set, bulb head lamp 12v 45/ 40w, fuse 15 amp, spark plug (champion rc 8 yc), spark plug, jet second, jet pilot, wrench spark plug, light assembly indicator, lens rh, lens lh, lens turn signal, lens tail stop, lamp assy room, lens back up rh, lens back up lh, harness assy wiring no.2st, harness assy wiring no.2, weather strip door outer, strap inside, scrape inside, glass wind shield, glass front door rh, glass front door lh, weather strip wind shield, weather strip door rh, trim operating extension assy, weather strip door lh, hub front drive clutch, sleeve front drive clutch, fork front drive shifting, handle jack, checking tool set, 3m way joint & hose, gasket & reservior, washer fr disc flexible hose, spring hold down, piston cup/boot set, spring tensioner, valve intake, valve exhaust (4 valve mpfi), seal valve stem, weather strip back door opening, mirrror assy out rear view rh, mirror assy inner rear view, cushion assy rh front soft top, cushion assy lh front soft top, back assy rh, back assy lh, tie rod end remover, bearing installer, steering pinion bush, side brg remover, wrench oil filter, oil pressure gauge, fork reduction shifting, boot lever no.1, gear speedometer drive, bolt spdom drive gear, pin, tank assy fuel, jack assy, jack assy, weather strip door rh, wheather strip back door, liquid gasket three bond 1207c, engine valve set of inlet and exhaust, shoe set rear brake, spring shoe return no.2, lock assy steering, switch assy change over, switch assy backup lamp, switch 4 wheel drive, switch assy stop lamp, switch assy oil pressure, gasket case front, mounting rh front/lh, mounting rh rear, nut, washer, spacer, oil seal, oil seal, o ring, o ring, spring, carburator assy, valve assy needle, float, jet assy slow, valve lifter, piston ring compressor, vaccum

CTN :40000284

05 May, 2025 50.00 Lacs

Handwara - Jammu And Kashmir

Tender For annual rate contract for supply of line materials and material for repairs of distribution transformers at electric division handwara for the year 2025-26 - supply of dpc aluminium wire (round) in sizes 12 to 20 swg conforming to ie 7404, supply of dpc aluminium strip of sizes for lv winding of distribution transformers 25 kva to 400 kva, supply of se aluminium winding wire ( round) in sizes 12 to 20 swg, supply of dpc aluminium wire (round) in sizes 12 to 20 swg (in exchange of one kg of srap of salvaged conductor), supply of dpc aluminium strip of sizes for lv winding of distribution transformers 25 kva to 400 kva (in exchange of one kg of srap of salvaged conductor), supply of se aluminium winding wire ( round) in sizes 12 to 20 swg (in exchange of one kg of srap of salvaged conductor), supply of lv brass bush rods 12 mm2 complete with bush collars, bush washers,nuts and bolts of identical matter, rubber oil seals and ring washers., supply of lv brass bush rods 19 mm2 complete with bush collars, bush washers,nuts and bolts of identical matter, rubber oil seals and ring washers., supply of ht brass bush rods 12 mm2 complete with bush collars, bush washers,nuts and bolts of identical matter, rubber oil seals and ring washers., supply of press card board sheet (4x4) soft calendared solid 1mm/2mm/3mm (raman make), supply of ht insulating gum, supply of glass sleeves of size 1m long,4 to 14 mm, supply of lethoride paper 8 to 12 mil, supply of ht paper 1.5/2/2.5 mil, supply of lv bushes 250 amp, supply of lv bushes 650 amp, supply of cotton tape 1 wide vector brand, supply of rubberized cork sheet oil resistant of size 4mm thick, 2ft x 3ft long (nucork/televrass make), supply of lv cork washers of size 12 mm dia, supply of lv cork washers of size 20/25/30/40 mm dia, supply of hv cork washers 110mm od, supply of oil seal ring (o-ring) for lv/hv bush rods 12 mm dia, supply of oil seal ring (o-ring) for lv/hv bush rods 20 mm dia, supply of transformer oil as per is-335 of 1993 with latest ammendents uptodate. (servo/power oil/apara etc), supply of aluminium thimbles of size 185 sqmm as per relevant is, supply of aluminium thimbles of size 300 sqmm as per relevant is, supply of backlite tube 1m long,16/20 mm dia, supply of spanners sets of all sorts and screw drives of all sorts, supply of oven heating rods, supply of old saries /cotton waste/dhoti cloth, supply of fabricated galvanized v-cross arm channel iron (75*40*40*6) mm for 11kv inluding back clamps of flat iron 50*6 mm for fixing of v-cross arm and gi angle iron pole top bracket 50*50*6 mm (400mm long) with galvanized welded plate of flat iron 50*6 mm along with double clamps complete assembly as per rec specification., supply of fabricated galvanized iron channels for sub-stations as per rec specification., supply of 11 kv disc insulators polymer type with fitting 45kn as per rec standard., supply of 11 kv pin insulators polymer type with gi pins 5kn as per rec standard., supply of 11 kv pin insulators porclein type with gi pins 5kn as per rec standard., supply of mukhi clamps as per rec standard., supply of lt shackle insulators 16kn as per rec standard., supply of fabricated galvanized nuts and bolts as per rec standard.

Central Government/Public Sector

CTN :40010478

23 Apr, 2025 NA

Multi City - Multi State

Tender For supply of shackle lock & lock pin with split pin

Central Government / Public Sector

CTN :39884062

16 Apr, 2025 NA

Kazipet - Telangana

Tender For corrigendum : supply of set of detailing shackles de shackles for wag-7 locos consisting of 03 items. 1) dee sh ackle, clw drg. no. 06/3/10/4, ref. no.1, alt-3 - 1 no. 2) dee shackle, clw drg. no.06/3/10/4, ref. no. 2, alt-3 latest - 1 no, 3) connecting pin clw drg. no. 06/3/10/4, ref. no. 3, alt-3 - 2 nos. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :39769179

18 Apr, 2025 5.19 Crore

Mumbai - Maharashtra

Tender For corrigendum : malleable components-, shackle front spring with bush 1512 tc/1510 tcic, , front spring bracket 1512 tc/1510 tcic, , rear spring shackle with bush 1512 tc/1510 tcic, , rear spring bracket 1512 tc/1510 tcic, , shackle front spring with bush 1612 & tata 1618 bs iii, , rear spring shackle with bush 1612, , front spring bracket 1612 & tata 1618 bs iii, , rear spring bracket front & rear 1612, , front spring shackle with bush for tata 709 and tata 712, , front spring hanger bracket rh rear & lh front for tata 1618 bs vi 12 mtr., , bracket lower cap front spring for tata 1618 bs vi 12 mtr., , bracket assy. shock absorber for tata 1618 bs vi 12 mtr., , shock absorber bracket (bottom) for tata 1618 bs vi., , bracket anti roll bar mounting rh for tata 1618 bs vi 12 mtr & tata 1613 cng bs vi., , bracket anti roll bar mounting lh for tata 1618 bs vi 12 mtr & tata 1613 cng bs vi., , bracket anti roll bar mounting lh for tata 1618 bs vi 12 mtr & tata 1613 cng bs vi, , shock absorber bracket rh for leyland 1812 and 2312 bs iv, , shock absorber bracket lh for leyland 1812 and 2312 bs iv, , front spring shackle, , rear spring shackle, , front spring bracket, , bracket-alternator and auto tensioner for leyland bsvi viking 210" wb, , bracket-front spring-fsrb rh for leyland bsvi viking 210" wb, , bracket-front spring-fsrb lh for leyland bsvi viking 210" wb, , ft spg bkt for leyland bsvi viking 210" wb, , gear box flange 150 dia serrated output flange for leyland bsvi viking 210" wb, , towing pin for leyland bsvi viking 210" wb, , compound link assy for leyland bsvi viking 210" wb, , cover on rear hub, , tongue spacer, , locking ring 1512 tc, , spacer 1512 tc, , oil dipstick 1512 tc/1612 tc with outer tube 2786 0199 9807 for tata 1618 bs iii & iv, , tensioner belt 1512./1510/1612, , bracket no.1 propeller shaft centre bearing, ,

CTN :39975168

06 May, 2025 NA

Multi City - Multi State

Tender For supply of shackle lock and lock pin etc.

Central Government/Public Sector

CTN :39946710

28 Apr, 2025 NA

Malanjahknd - Madhya Pradesh

Tender For supply of 223300004 ms lancing tube size id 1 by 4 inch lancing pipes both ends screwed and one end socked , 240300001 forged d shackle 5 ton cap screw type by pin with eye and collar forged , 240300002 forged d shackle 2 ton screw type by pin with eye and collar forged quenched , 240300003 forged d shackle 3 ton cap screw type by pin with eye and collar forged quenched , 240300004 forged d shackle 8 ton cap screw type by pin with eye and collar forged quenched , 240300005 forged d shackles 15 ton screw type by pin with eye and collar forged quenched

Central Government/Public Sector

CTN :39916813

21 Apr, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of seamanship gear items for vc11190-91 - grapnel/creeper with lanyard with suitable bow shackles (0263/721-6113)material: polyproylene lanyard (standards for pp rope: is 5175: 2022)rope length: 40mts; diameter of rope: 16mmgrapnel material: steel, cordage shackles stoppers with bow shackles(25mm)material: polyproylene rope and shacklelength: 2 mts; diameter of rope: 24mm, snatch blocks with straight screw shackles material: wooden / synthetic resin bonded fibre (srbf)to suit diameter of rope: 36mmtest load: 06 to 08 tons, remating line (one end finished with soft eye connected to welling spring hook)material: polyproylene rope (standards for pp rope: is 5175: 2022)diameter of rope: 24mmlength: 220mts;test load for welling spring hook: 6t, straight screw shackle and welling spring hook for retaining pendant.d- shackle (pin size:25mm) and welling spring hook test load: 6t, swivel and non -swivel inglefield clip(brass) for light line rope.inglefield clip(swivel and non swivel): size-12mm, snatch blocks with straight screw shackles material: wooden / synthetic resin bonded fibre (srbf)to suit diameter of rope: 16mmtest load: 02 tons, gunline pendantpp rope with an inglefield clip on one end and a puma plate (brass material) on the other endlength of rope: 50 cmsrope diameter: 12mmpuma plate: brass, modified distance line with a inglefield clip at each endmaterial: polyprepylene rope (standards for pp rope: is 5175: 2022)length: 66 mtsdiameter of rope: 12mmsize of flags 330 mm equilateral triangle.the digits denoting the distances, in meter, are to be painted on both side of the flags each digit is to be 150 mm in height and 15 mm in width., welling spring hookmaterial: carbon manganese steel test load: 1.5 tonsswl: 0.75tons, test weight (with 5 removable discs on a central rod)135 kg, a 1mtr, 1ton swl round sling & appropriate straight screw shackle is to be used to attach the weight to the traveller. load certificates of wire rope, d-shackle to be provided.test load: 2 -3 tons, toggle with lanyardmaterial: woodenlength: 250mm longdiameter: 40mm, distance linebraided polyester with non-rotating inglefield clips at either endsize : 8.5mm dialength: 102mtsmin breaking load: 0.79tons, transfer bag with buoyancy aid arrangementmaterial: flax canvas/waterproof, mail bag with buoyancy aid arrangementmaterial: flax canvas/waterproofdimension: 300mm x 300mm, snatch blocks (to suit 16mm dia rope) with straight screw shackles (size:16mm)material: wooden / synthetic resin bonded fibre (srbf)to suit diameter of rope: 16mmsnatch block proof load: 3.6 tonsstraight screw shackle proof load: 9.5tons, straight screw shackle (d-shackle); pin size : 25 mmproof load: 9.5t, straight screw shackle (d-shackle); pin size :16mmproof load: 3.6t, boat hookmaterial: wooden handle with metallic hooklength: 5mts, emergency tool bagaxe & maul, hammer, hatchet, hand pliers, marline spikes, adjustable wrench,wire/bolt croppers, eye wash bottle & googles (04nos) , moussing wire. above items are to be provided in a waterproof canvas bag., ras signal wands with batteryfilter red, filter green, filter amber (every colour 4 sets), shot mats/ dumping matsmaterial: braided manila size: 3 mts x 3mtsthickness: 40mm(eye rings are to be provided on the four corners of the dumping mat for securing the mat with rope), electronic display board for raselectronic display board should contain 15 characters, each having a letter height of 200 mm , with a keyboard cable connected.color of led: red, station marker boxmaterial: wood/light weight steelthis is a 45 cm (length) x 22.5 mtr (breath) x 45 cm (height) box made of light weight sheet metal. on the top of the station marker box are three coloured lamps (green, red, amber), with shades and having independent operating switches. on the outboard side of the box, three rows of three holes, each measuring 2.5 cm in dia, are to be made. each hole is fitted with its individual hand operated shutter.

Sealing Pin Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government / Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector