Latest seat assembly Tenders | Government seat assembly Tenders

State Government

CTN :38564131

30 Dec, 2024 NA

Chhindwara - Madhya Pradesh

Tender For building material - store material, cement (is) (rate 50 kg per bag) 43 grade 53 grade ordinary portland cement (opc) ppc-portland pozzolana cement, (is) thermo mechanically treated bars (tmt) mild steel rod (rate per kg) required in 8mm, 10mm, 12mm dia, sand (white sand) (rate per cubic metre) excluding void is: 1542 is: 2166 for using it in construction works, aggregate (rate per cubic metre) excluding void 20 mm nominal size graded stone aggregate 20 mm nominal size graded stone aggregate, hard moorum (rate per cubic metre) excluding void hard muram having cbr> 12%, stone dust (rate per cubic metre) excluding void crusher stone dust, brick (rate per thousand numbers)size (190*90*90 mm) well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process crushing strength not less than 40 kg/cm to and water absorption not more than 15% , floor tiles (rate per square feet)size 300x300 mm ceramic glazed tiles istiles thickness 6 to 7 mm, wall tiles (rate per square feet)size 300x450 mm ceramic glazed tiles istiles thickness 6 to 7 mm, western commode (rate per each)size 360mmx475mmx395mm anti-germ fluoro-polymer coated water closet european type w. c. pan size 360x475x395 mm with solid poly propelyne made soft closing seat cover., wash basin (rate per each)size- 570mm x 470mm x 190mm all fittings and fixtures, door frame (rate per kg)size 100mm x 50mm x1.6mm profile c of 1.6 mm thick single rebate is 4351 manufactured from commercial mild steel sheet, flush door (rate per metre)size- 1800 mm x 850 mm x 35 mm is marked flush door shutters is: 2202 (part 1) decorative type, core of block board construction with frame 1st class hard wood and well matched teak 3 ply veneering with vertical or cross bands and face veneers on both faces of shutter, gi pipe size- 32 mm dia (rate per meter) is mark g.i. riser pipe as per i.s. 1239 minimum thickness 3.2 mm, gi pipe (rate per metre)size 65 mm dia galvanized iron (ms) pipes is-1239 nominal bore in 65 mm minimum thickness in 3.6 mm, hdpe pipe (rate per metre) size- 50 mm dia hdpe 100is 4984/ 14151/ 12786/ 13488 minimum thickness 3.6 mm, wire (rate per running meter) size- 4.0 sq.mm multi strand submersible flat cable is marked 3 core copper wire, water storage tank pe capacity 500, 1000, 10000 ltr. (rate per nos), socket (rate per nos) size 66 mm dia galvanized iron (ms), elbow (rate per nos) size 66 mm dia galvanized iron (ms), pvc pipe (rate per metre) the oriented un-plasticized polyvinyl chloride pvc-o pipes for potable water supply as per is: 16647-2017 duly inspected and tested and having bis certification mark size (20 mm) dia minimum thickness 2.87 mm size 1 (25 mm) dia minimum thickness 3.38 mm size 1 (40 mm) dia minimum thickness 3.68 mm

Central Government/Public Sector

CTN :38569639

02 Jan, 2025 NA

Chennai - Tamil Nadu

Tender For supply of driver seat assembly as per clwdrg.no. 05/1/38/44, alt 9. ref 1 to 15. [ warranty p eriod: 30 months after the date of delivery ]

CTN :38555911

03 Jan, 2025 NA

Jalandhar - Punjab

Tender For tender for supply of cusion with cover 21inchx22inchx4inch , cover for cushion 550x525x100mm , seat cushioned foam 21inchx22inchx4inch 40 density , cushion seat with rexine cover for chair dining cushion , leg of charpoy gi pipe 32mm and 408mm length duly threaded at one end , cushion back with rexine cover for chair easy cushion as per fd-358 , cushion seat with rexine cover for chair wrting cushion as per fd-1107 , cushion back with rexine cover for chair wrting cushion as per fd-1107 , cusion with cover for stool dressing lades (map) as per fd/map-ii/07. , pvc seat and back for chair varandah fd/map-ii/06 , back for chair steel made of shesham and duly canned by 2mm half round plastic cane 4mm (ref drg fd-75(m) , plywood 8inchx4inchx12mm one side teakface , plywood teakface 8inchx4inchx6mm , long rail gi 32mm for gi chorpoy size 2 mtrs long both side duly threaded , tape newar nylon 50mm wide. , plywood 8inchx4inchx9mm thick bwr commercial , short rail gi 32mm for gi chorpoy size 900 mm long both side duly threaded , plywood bwr commercial 8inchx4inchx12mm , plywood 8inchx4inchx4mm one side teak face , plywood 6feetx4feetx19mm , plywood 7feetx3feetx12mm , plb 2400 x 1200 mm x19mm , lakh dana , handle cp for almirah steel 100mm , gi tubing 32mm , pvc seat for chair dining make amko as per fd/map-ii/05 , handle ss for locker steel , plywood commercial 8feetx3feetx19mm , light siller (nc sanding) , plywood 8feetx4feetx4mm , pre laminated particle board 2.75x1.83x18mm thick , shocker (hydraulic spindle) for chair revolving , pvc shoe for chair with screw as per sample. , gi elbow 32 mm 3 way , paint white enamel , handle for table bed side , lock 50mm for almirah med steel , touch wood , plywood 6feetx4feetx9mm , spirit dentured best quality , lock for almirah steel medium 75mm , pvc base for chair revolving with wheel , bwr plywood 1800x1200mmx12mm , paint synthetic enamel olive green , fevicol sh , lock for steel almirah large 77mm , telescopic channel 14inch long , turpentine oil , thinner , telescopic channel 8inch long , fevicol sr , pvc bush for chair visitor , french polish , hessian cloth 48inch wide clossly woven , cloth malmal , mr plywood 2400 x 1200 x 6mm , teakwood beading 6mm thick 18mm wide , paint synthetic enamel black , palmet patti , asian paints liquid varnishes or shellac varnish , screw wood 35mm (gypsum) (100nos/pkt) , screw wood steel 50mm (gypsum) , bwr plywood 1800x900mmx12mm , screw wood 45mm (100nos/pkt) (gypsum) , paint se smoke grey , paint brush 75mm , paint brush 50mm , looking mirror for table dressing gents760x380x5mm , knob fancy in teak shade , emery paper no-120 , screw wood steel 40mm (gypsum) , wooden scantling 75x25x2000mm long , nails wire 75mm , hasp & staple cp 2inch , nails wire 32mm (headless) , screw 75mm , pvc arms for chair visitor , emery paper no-100 , paint brush 25mm , teakwood beading 4mm thick 18mm wide , bow handle aluminium 100mm , nails wire 20mm , nails wire 50mm 14 no , screw wood steel 65mm (gypsum) , screw wood steel 25mm(100nos) (gypsum) , nails wire 1/2inch head less 18 no , nails wire 50mm , nails wire 40mm 14 no , nails wire 100mm 14 no , screw wood steel 30mm (philips head)

CTN :38557750

01 Jan, 2025 3.45 Lacs

Gurdaspur - Punjab

Tender For supply of oil filter for genr set 30 kva , diesel filter for genr set 30 kva , air filter assy for genr set 30 kva , fuel filter for genr set 30 kva , air breather for genr set 30 kva , volt meter for genr set 30 kva , over flow pipe for genr set 30 kva , fan belt for genr set 30 kva , radiator cap for genr set 30 kva , solenoid for genr set 30 kva , fuel feed pump for genr set 15 kva , air filter for genr set 15 kva , piston ring set for genr set 15 kva , fuel filter for genr set 15 kva , fuel pipe line for genr set 15 kva , push rod tube seal for genr set 15 kva , tapper cover gasket for genr set 15 kva , bty terminal for genr set 15 kva , head gasket for genr set 15 kva , air cleaner assy for genr set 15 kva , air filter assy for genr set 15 kva , radiant fan for genr set 15 kva , radiator cap for genr set 15 kva , oil filter for genr set 7.5 kva with portable tower light , diesel filter for genr set 7.5 kva with portable tower light , air filter assy for genr set 7.5 kva with portable tower light , fuel filter for genr set 7.5 kva with portable tower light , tubelight led with complete fitting , flexible wire copper conductor , service cable , bulb 15 w , halogen bulb , cgi sheet 1800 x 1800 x 0.63mm , paint black , paint og , paint white , ceiling fan 1200 mm sweep , oil filter for portable tower light , air filter assy for portable tower light , diesel filter for portable tower light , benzo washer 17 oblique 19 no for portable tower light , benzo bolt 17 oblique 19 no for portable tower light , fuel filter for portable tower light , overhaul of genr set of portable tower light , aluminium window , ms steel window jail type , aluminium door with acp sheet , ms steel door jail type , ceiling tiles 2 feet x 2feet , main angle for ceiling , ceiling t 4 feet long , wall angle for ceiling , ceiling t 2 feet long , wire for ceiling , black screw for ceiling 3 oblique 4 ench , pvc insulated cable elect 1.5 sqmm , pvc insulated cable1 sqmm single core , switch socket combination 15 oblique 16 amp , socket 5 oblique 6 amp 5 pin , pvc door for bathroom , wash hand basin , pillar cock for wash basin , switch board 8 ench x10 ench , bath cabinet , corner shelf , cp bib cock 15mm , ewc , flushing cistern 10 ltr , ewc seat cover , jet spray , pvc connection 600mm long , shower rose , gi pipe 15mm , gi pipe 20mm

CTN :38556439

02 Jan, 2025 NA

Daman - Gujarat

Tender For supply of furniture - rack adjustable 6 tier steel , bath stool pvc , chair easy , chair writing , peg table , receptacle pvc , sofa chair with cushion one seat , table bed side , table center , table writing , table dressing gents , almirah medium with shelves , almirah steel large with shelves , book case open small , chair dining with long back , chair easy cushioned , chair verandiah , chair writing steen , hat stand with mirror , hot case small , magazine rack medium , notice board , safe meat and milk small , side board small 1200x455x760mm , sofa set 5 seater with cusion , stool dressing cushioned , table dining 8 person 6 ft x4 ft , table cook house , table dressing ladies , table pantry medium , table office clk steel , teapoy 600x450x540mm , teapoy varandha , table card 900x900x600mm , chair cba spl with hand rest , table center two tier , form with back , receptacle small , table stainless steel top 1670x760x750mm , stool revolving adjustable , stool 2 feet hight , bed steel iron hospital , locker steel 4 unit , chair cb steel , bed hard 1980x900x660mm , rack steel adjustable , charpoy gi with plywood top , table writing medium , teapoy wooden , table 3x2 inch with drawer , chair plastic mouled with arms and with cusuhned ornate , table 3x2 without drawer 900x600x760mm , receptacle large with bucket , table dining 6 person , safe milk , hot case large , foam with back , receptacle , chair dining , table cook house terrazzo top , chair writing 950mm high 500mm wide , table 2x2 with drawer , rack steel 1830x760x1905 mm bid number/ ( ( ) ): gem/2024/b/5658031 dated/* : 12-12-2024 bid document/ 1 1 / 49

CTN :38349157

18 Dec, 2024 NA

Baramulla - Jammu And Kashmir

Tender For bid to ras corrigendum : supply of bathroom or toilet mirror (v2) (q4) , european pattern toilet seat vitreous china (q3) , molded case circuit breakers (mccb) as per is / iec 60947 (q3) , xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1) (q2) , steel pipes for water and sewage as per is 3589 (q3) , piano type non modular electrical switch socket combination as per is 3854 and is 1293 (q3) , copper alloy fancy taps for bathroom as per is 8931 (latest) (q3) , tower bolts (ferrous metals) as per is 204 (q3) , pvc insulated unsheathed cable with flexible conductor as per is 694 (q2)

CTN :38557741

01 Jan, 2025 NA

Chamoli - Uttarakhand

Tender For supply of door handle , door stoper , sliding bolt , tower bolt , door eye , bathroom mixer , toilet paper holder , health fouct , box type european seat , cp jali , towel rail , towel ring , mirror shelves , wash basin with pedestal , celling fan , led ceiling circular light , wall bracket light fancy , bed light wall mounted , chandelier light , modular switch , modular socket , modular fan regulator socket type , modular socket , mirror led light , geyser , exhaust fan , modular indicator light , modular bell switch , air conditioner with stabilizer godrej hevlls , pvc waste pipe , bathroom shower , mirror , teak wooden flooring , 2_5 sq mm wire , 1_5 sq mm wire , s s curtain rod , bracket and holder for ss curtain , soap holder , door lock double side

CTN :38603326

20 Dec, 2024 NA

Kupwara - Jammu And Kashmir

Tender For supply of mcb - miniature circuit - breakers for a.c. operation as per is / iec 60898 (part 1) (q2) , bayonet lamp holders as per is - 1258 (q2) , pvc channel (q3) , piano type non modular domestic electrical sockets - is 1293 (q3) , toilet seat - indian style squatting pan (q3) , sinks / wash basins - vitreous china as per is 2556 (part 4) (q3) , bathroom water shower (q3) , wood screws (q3) , wire nails (q4) , flushing cistern (q3) , european pattern toilet seat vitreous china (q3) , pvc insulated unsheathed cable with flexible conductor as per is 694 (q2) , rigid plain conduits of insulating materials as per is 9537 (part 3) (q3) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , cast copper alloy screw down bib taps and stop valves for water services as per is 781 (q3) , tapping screws (q3) , putty for use on window frames as per is 419 (q3) , hydraulically regulated door closers (q3) , rotational moulded polyethylene water storage tanks as per is 12701 (q3)

Central Government/Public Sector

CTN :38172278

23 Dec, 2024 NA

Bathinda - Punjab

Tender For corrigendum : supply of valve and seat assembly as per matsura drawing

Central Government/Public Sector

CTN :38478441

01 Jan, 2025 59.00 Lacs

Gandhidham - Gujarat

Tender For provn of furniture for md accn for 08 offrs, 09 jcos and 16 ors at gandhidham mil stn - sch a part-i (wooden furniture), bath mat pvc (fd/e6/map/07) dimension :the size of the bath mat shall be 400mm l x 300mm w x 250mm h.description: the bath mat pvc shall be made up of 5mm thick ppcp material .the bath mat shall have centre leg of dia 25mm.the four legs shall be in arc shape and of size 10mmx100mm.the top of the bath mat shall have 3mmx10mm thick stiffener moulded along with the seat in single piece underneath. the weight of the bath mat shall not be less than 1.3 kgs., bin linen multipurpose (fd/e6/map/09)the overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high. the sides, partitions, shelves, drawers of the bin linen shall be made up of 18mm thick prelaminated particle board exterior grade. the back of the bin linen shall be of 12mm thick commercial plywood. the three equal shutters shall be provided with magnetic catchers. all fittings and fixtures shall be done as per drg.the base shall be provided at an height of 75mm from ground and shall be of first class hard wood with four nos of 25x25mm stiffeners placed at equidistant positions. rest all as per drg.all parts where polish require shall be done with glossy finish., chair dining offrs (fd/map-ii/04)all wood must be first class teak wood.overall size shall be 950mm high,450mm wide and 450mm deep.the size of the legs shall be 35x50mm .front and side rails shall be of size 25x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of approved foam covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.four teak wood vertical stiffeners of section 20x25mm shall be fixed in back of chair. side frame should be 35x50mm.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.the curved teak wood back shall be of section 25x45mm.all sizes shall be taken as stated in drg. all wood surfaces shall be lacquer polished with high gloss finish of walnut shade.rest all as per drg., chair easy (fd-229)dimension: overall size shall be 510 mm long, 575mm wide and 740mm high .description:- all wood shall be first class teak . front legs shall be 25mmx55mm in section and 355mm high up to seat level. rear legs shall be of 25mmx55mm in section and 300mm high up to seat level and slanting 50mm away from vertical. front, back and side rails of seat shall be out of 25mmx50mm in section and made to shape as shown on drawing. front, back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear teak wood arm rests shall be provided at 190mm above seat level and shall be size as shown on drawing.caning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6gms in ten running meters. caning shall be done in godrej pattern. pvc shoes 25mmx25mm shall be provided at the bottom of all legs.finish:- all wood surfaces exposed to view when placed in position shall be given high gloss french polish with lacquer finish., chair dining (fd/map-ii/05)dimension:overall size shall be 890mm high, 440mm wide and 430mm deep.description:the size of the legs shall be 30x55mm.front and side rails shall be of size 30x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg. pvc seat 4mm thick of ppcp material and weight not less than 0.50 kgs with perforated holes shall be fixed inside the frame of seat with proper screws.one additional stiffener of size 30x25mm shall also be fixed below the seat for extra suuport of pvc seat.the height of the seat shall be at 460mm high from ground.the size of the teak wood back shall be 45x15mm made out of 45x35mm section.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.f

Seat Assembly Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector