Latest seat harness Tenders | Government seat harness Tenders

CTN :41075811

24 Jul, 2025 NA

Garhwal - Uttarakhand

Tender For supply of seat harness small,seat harness medium,chalk powder 200 gms,descender,carabiner auto lock,climbing bolt set of 50,dynamic rope 10 mm and 200 mtr

CTN :41056412

21 Jul, 2025 NA

Jalandhar - Punjab

Tender For tender for supply of lv7/tata 10453135 6212-0300-121 bulb 21 w ts-29201 , lv7/stln 10337892 6240-013624 lamp incandescent , lv7/mg 10024400 cvd-09824m-99332 jack with handle , lv7/tmb 10453935 6210-000334 blinker glass lh , lv7/tata 10473152 000-151-0114j brush set(4) , lv1/r72 10229679 5310720221097 aluminium gasket 8x14 (520-06-002) , lv7/t-815 10319685 025-225-259-000 rear view mirror , lv7/maruti 10442594 84531m80121 glass front door rh , lv1/r72 10283379 172-04-485a pin (drg no 172-04-485-a) , lv7/tata 10474041 2641-5440-0111 assy turnindicator , lv7/tmb 10445511 2520-012585 assy clutch pressure plate 330 dia , lv7/stln(vf) 10326606 4240-72-0158111 cartridge respirator , air filtering , lv7/hmv/8x8/al/sv 10558545 x0302050 poly v belt alternator drive , lv7/stln 10337592 p-3700951 brush set , lv7/maruti 10444667 29241-80050 sleeve front drive clutch , lv7/tmb 10471124 2699-2520-0102 clutch disc 228 dia

CTN :40808350

17 Jul, 2025 13.22 Lacs

Ganganagar - Rajasthan

Tender For requirement of safety, rescue & security items for ssctps fy 2025-26,suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap , gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch) , barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5 , chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160 , acid/ alkali proof gloves having size of 18 inch with palm m , normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton , fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics , safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white , safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green , impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003 , foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592 , carry sheet (stretcher) l x b: 212 x 75 cm with self weight 1 kg, load limit 159 kg, lift type: horizontal , wind indicator made of light weight pu coated nylon material. double stitch at all joints. , plastic eyelets gives anticorrosion proper-ties. the complete wind sock comes with a polymer packing. 2" dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe. , ear plugs corded epsav-570 , nose/ dust mask rpsav-p2 , flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164 , vapour respirator with head stripes to accommodate twin cartridges with exhalation valve , safety net consisting of pp rope dia: 4mm, mesh size: 100 mm, outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr , ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a) , heat shield hand gloves made of normal and tannedsplit leather of reddish-brown colour. , insulating thermalbarrier as inner layer gives heat protection upto 250 degrees. thumb re-inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344 , insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991 , electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991 , hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350c temperature.it should be atira tested for 250c splash, tested to iso 5025,9151,6942,9185 and en 1875-3 , chemical splash goggles with indirect ventilation, protect against splash and a hard-coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003 , chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003 , elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv , chemiflex latex gloves, length-300 mm, en si

Central Government/Public Sector

CTN :41053317

06 Aug, 2025 NA

Amritsar - Punjab

Tender For supply of respiratory half face mask (uses for painter during spry painting) with 1. re-usable type half facepie ce silicon respirator as per spec:-en:140-1998 2.organic vapour cartridge conform with en:14387-2004 +a1 : 2008 (0 2 nos) 3.cartridge or prefielter retainer (04 nos) 4.spray painting pre-filter conform with en:14387-2004+ a1:2008 (10 nos) . [ warranty period: 30 months after the date of delivery ]

CTN :40266808

24 Jul, 2025 2.03 Lacs

Tehri Garhwal - Uttarakhand

Tender For corrigendum : tender for supply of dielectric non conductive harness saftey belt , full face chemical respirator with twin cartridge , breathing apparatus , protective suit , sf6 saftey gloves butyl , leather gloves , acid resistance gloves , face mask

CTN :40702756

16 Jul, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply of hand held search light with 5 mountaineering equipment f f - hand held search ligh - solar charged , head lamp one set of 2 nos , seat harness , tandem pully , carabiner screw , carabiner plain

CTN :41003726

28 Jul, 2025 NA

Ranchi - Jharkhand

Tender For supply of speed climbing wall with allied accessories 15m and 05 cm by 6m , auto belay devices , dynamic rope , seat harness , mittens , climbing helmets , carabiners

CTN :41003626

21 Jul, 2025 NA

Hyderabad - Telangana

Tender For supply of disposable ear plug , safety hood , welding oxyacetylene goggle , first aid kit , over spectacles , safety spectacles , anti fog protection glass , reusable respirator with double filter , welding mask with exhalation valve , cartridge pair for respirator

CTN :40821460

17 Jul, 2025 NA

Multi City - Rajasthan

Tender For corrigendum : requirement of safety, rescue and security items for ssctps fy 2025-26, suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap, gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch), barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5, chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160, acid/ alkali proof gloves having size of 18 inch with palm m, normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton, fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics, safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white, safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green, impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003, foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592, carry sheet ( stretcher)l x b: 212 x 75 cm with self weight 1 kg , load limit 159 kg , lift type: horizontal, wind indicator made of light weight pu coated nylon material. double stitch at all joints. plastic eyelets gives anticorrosion proper ties. the complete wind sock comes with a polymer packing. 2 dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe., ear plugs corded epsav-570, nose/ dust mask rpsav -p2, flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164, vapour respirator with head stripes to accommodate twin cartridges with exhalation valve, safety net consisting of pp rope dia: 4mm, mesh size: 100 mm,outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr, ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a), heat shield hand gloves made of normal and tannedsplit leather of reddish brown colour. insulating thermalbarrier as inner layer gives heat protection upto 250 degrees.thumb re inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344, insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991, electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991, hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350 c temperature.it should be atira tested for 250 c splash, tested to iso 5025,9151,6942,9185 and en 1875-3, chemical splash goggles with indirect ventilation, protect against splash and a hard coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003, chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003, elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv, chemiflex latex gloves, length-300 mm, en size- l coating m

State Government

CTN :40985789

28 Jul, 2025 3.50 Crore

Mohali - Punjab

Tender For purchase of biomechanical lab - force platedimensions (w x d x h) in mm : 600 x 400 x up to 50 number of axes for force measurement: all 3 axes. x,y,z plate should be portable in naturesensor type: piezoelectricsampling frequency-(hz) =1000 hz or more force measured on each axis-fx,fy: 2,000 newton or more, fz: 10,000 newton or more hysteresis- (%fso): 0.5 linearity (%fso) 0.5 crosstalk (%) : 2water resistance rating: ip 50 or better.should be inclusive of installation.should be supplied with carrying case for 2 plates and noise free ups for on-ground assessment. the carrying case should be strong and sturdy.should be able to accommodate portable force plate 9286 ba, daq box 5695 and connecting cablesshould be able to protect the equipment from rain, impact and dust, should have rollers to move easilyshould be able to accommodate an ups also., isokinetic dynamometershould be able to access/test various joints in isolation should be able to meet requirements to test sports personsshould be able to test in different resistance modes such as isokinetic (concentric-concentric, concentric-eccentric ,eccentric, concentric ,and eccentric-eccentric), isotonic, isometric, and passive protocols should include options for angles, hold-times, rest period, repetitions, and sets. the system should be able to test all the major body segments and joints such as shoulder, forearm, elbow, wrist, hip, knee, and ankle.should have adjustable range of motion stops in full 360 degrees.should have 360-degree rotation for the force arm (connecting dynamometer to the pedal) to have wide range of motionshould be able to accommodate different athletes with varying height and weight with provision for seatbelt harness for better stabilitythe dynamometer or chair should be movable to accommodate different athletes for quick set-up and better usability with locking clamps for securing the system in place for testingshould be able to do gravity correction when the limbs are positioned with the lever arm on the dynamometerthe software should be provided to analyze the raw data and export the raw and processed data in different file formats such as excel, text, etc. the software should provide detailed report for various testing protocols such as individual test for joints, data/graph overlay for comparing pre and post testing, repeatability, progress, multi-session.should be provided with latest compatible workstation/laptop of reputed brand like hp, dell (latest generation) processor, minimum16gb ram, windows os 11, and laser printerconcentric speed: 500 deg/sec or more eccentric speed: 500 deg/sec or more concentric torque: 500 ft-lb (678nm) or more eccentric torque: 500 ft-lb (678 nm) or more isometric torque: 500 ft-lb (678 nm) or more isotonic torque: 500 ft-lb (678 nm) or more isotonic torque as low as .5 ft-lbfeedback formats: roadway, interactive line, interactive path, reaction training, proprioception training, breakout, and pong.torques. time, torques. angle, torque bars, work bars, power bars. it should be possible to use mechanical stops even with custom patterns (important for safety in research)the same attachment should be usable for left and right side of subject for consistencies in data.should be certified and approved by ce/eu medical devices directives or usfda, nord boardit should be portable and should have 2 load cell sensors per unit with easy to attach hooks pivoting 360 degrees joint improving sensor accuracy it should have knee position indicator for replication of test position in each time. should have sample rate per sensor: upto 400hz, capacity per sensor: 100 kg/980-1000n safe over load per sensor: 150kg/1500n, max over load per sensor: 200kg/ 2000n, resolution: 1n and sensitivity: 22.0+/-mv/v. should have rechargeable battery & battery life should be100 active hours approx. should have working temperature range 5-40 c. (all weather proof) latest upgradable software should have both wired & wireless connectivity connec

Seat Harness Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government