Latest series reactor scrap Tenders | Government series reactor scrap Tenders

CTN :44294919

28 Mar, 2026 NA

Jammu - Jammu And Kashmir

Tender For corrigendum : labour rate contract for the financial year 2026-27 for material handling job and allied works - labour rate contract for the financial year 2025-26 for material handling job & allied works such as loading, un-loading, carriage, verification and stacking of line, sub-station materials and equipment viz. power & distribution transformers, acsr (conductors of all sizes), cables (of all sizes), st poles,pcc poles, cr panels, 11kv vcb’s and other allied materials viz transformer oil, insulators, safety equipments etc. at electrical central stores division, jpdcl jammu, ut of j&k”.

Central Government And Public Sector

CTN :44505788

20 Mar, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of others - released and unserviceable one number steel lattice tower structure (flood light tower). (a) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.(b)) post auction no representation shall be entertained. (c) the lot to be sold on as is where is basis. (d) lots to be sold and delivered on actual weight basis in any govt. approved road weigh bridge. (e)1. safety briefing: conduct a thorough safety briefing to all the personnel involved. ii. securing the area: temporary barricading shall be provided on all four sides of lattice tower for suitable working area and to restrict unauthorized access to the site. where not feasible, alternative measures shall be adopted such as deputing personnel to avoid unauthorized entry, warning tapes or boards. continuous supervision of electrical and engineering supervisor shall be adopted during dismantling of lattice tower; it must be ensured that area around the tower is clear and free from any obstruction. iii. equipment preparation: necessary equipment required: (a) climbing stairs (generally available with the lattice tower) (b) electrical operated cutting tools (hand grinder, saws) with suitable generator set. (c) lifting equipment (rope, pulleys etc.) (d) personal protective equipment (safety helmet, safety belt, protective glasses, hand gloves, jacket etc.) (e) any other requisite equipment to complete the job. iv. pre- intimation to concerned departments: pre-intimation in prescribed format hard copy should be sent to concerned departments regarding date and duration fixed for dismantling of structure in prescribed proforma of joint assessment as -1. station yard- 2.location- 3. kilometer ¿ 4.name and address of firm carrying out dismantling work- 5.height of tower structure im meter- 6.condition of foundation and structure supporting bolt ¿ 7. availability of flood light fittings (nos. & wattage) - 8. power supply cable (type and size)- 9. dismantling of cable required (in m)- 10.1. any other asset on tower that needs to be removed 2.. any other asset near tower that needs to be dismantled. 12 distance from adjacent tracks (in m) 12 proximity from ohe structure (in m)- 13 barricading possible (yes/no)- 14. power block required. if yes, duration- 15.traffic block required. if yes, duration- 16. location for storing dismantled ms scrap- 17 any infringement- 18 any other remarks- signature of firm's representative at site-

Central Government/Public Sector

CTN :44508793

09 Apr, 2026 NA

Bundi - Rajasthan

Tender For aden/w/kota section : provision of fire fighting system for drm office kota with all accessories, aden/w/kota section : provision of fire fighting system for divisional railway hospital, kota with all accessories, bundi - improvements to community hall at bundi and provision of new community hall in mandalgarh railway colony, bundi - improvement of sse/p.way/office, sse/w/office, sse/signal/office, sse/tele/office, sse/trd/office and sse/power/office at bundi station and kota-cor section - provision of pump & related electrical work for water supply arrangement.

CTN :44452223

28 Mar, 2026 14.15 Lacs

Navsari - Gujarat

Tender For supply of bi facial solar panel 550 watt , topcon solar panel 610 watt , cut section of gate valve,globe valve,ball valve,diapharm valve,needle valve,check valve,safety valve,butterfly valve,pnematic control valve 4 inch diameter , cut section of centrifugal pump,gear pump,multistage c f pump,reciprocating pump,screw pump , cut section of shell and tube heat exchanger acrylic material , cut section of reactor with accessories motor,agitatot,support leg,nozzle,manhole,baffels,thermo well,bottom valve , vrf or vrv unit with two indoor unit 2 point 5 tr each and 5 tr capacity out door unit complete with air cooled condenser,accessories and controls,harmetic shield type compresor,r410 a single phase , evacuating and charging station as above but fitted with weighing scale 0 point 25 hp,230v,50 hz with gauge manifold , gauge manifold with gauges different size of hoses for r134a,r22,r32 and r 410 , wash bag cover jacket for ac service indore 1 point 5 ton,2 point 5 ton capacity , safety belt, industrial type full body protection double rope double hook,100 kg human weight , embroidery machine , brake test arrangement with two spring balance 0 to 25 kg rating , automatic motor coil winding machine with step arbor , three phase variable auto transformer ac varic 3 phase , 0 to 440v, 25a, 50 hz , synchronous motor, with accessories , vfd ac drive ac motor drive with vvvf control 3 phase , single phase transformer, core type, air cooled,1 kva,240 or 415 v,50hz , stepper motor with digital controller , bipolar , 12v dc , input pulse 5v, step angle 1 point 8 , power supply 230 v ac , oprating condition 0 to 40 deg c , bldc motor fan with controller 40 watt , servo motor with contoller 300rpm,12v dc,6mm dia and 15mm legth shaft ,holding torque 30kg cm,no load current 0 point 8 amp,full load current 7 point 5 amp , electrical test bench integrated with 0 to270v ac variac 25a , synchronization trainer for laboratory , solid flow measurement set up bi facial solar panel 550 watt,efficiency 21.3 percentage,dimension 2285mm x 1134mm x 35 mm,anodized aluminumsilver frame,connector mc4 ev02,maximum system voltage 1500v dc, topcon solar panel 610 watt,efficiency 22 point 6 percent to 22 point 9 percent,n type topcon,dimension 2382x1134x30 mm,2 mm dual glass,maximum system voltage 1500v dc, cut section of gate valve,globe valve,ball valve,diapharm valve,needle valve,check valve,safety valve,butterfly valve,pnematic control valve 4 inch diameter, cut section of centrifugal pump,gear pump,multistage c f pump,reciprocating pump,screw pump, cut section of shell and tube heat exchanger acrylic material, cut section of reactor with accessories motor,agitatot,support leg,nozzle,manhole,baffels,thermo well,bottom valve, vrf or vrv unit with two indoor unit 2 point 5 tr each and 5 tr capacity out door unit complete with air cooled condenser,accessories and controls,harmetic shield type compresor,r410 a //bid details 2 / 25

State Government

CTN :44308522

17 Mar, 2026 NA

Hamirpur(Hp) - Himachal Pradesh

Tender For corrigendum : as per schedule - dismantlement, loading, transportation, unloading of 01no. 132/33kv 16/20mva power transformer & installation of same at 132/33kv sub-station, kanghain under electrical system division, hpsebl, hamirpur.

corporations/Associations/Others

CTN :44434285

18 Mar, 2026 1.19 Crore

Kolkata - West Bengal

Tender For supply, installation, testing and commissioning of various electrical lt switch gears , control equipment and cables in the ltdb of power load at the sub station

Central Government / Public Sector

CTN :44436691

11 May, 2026 NA

Jeypore - Odisha

Tender For jeypore -nabarangpur new railway line project: construction of new bg railway line between ambaguda (excluding) (13.60 km) to nabarangpur(including) (43.99km) involving earthwork in formation in embankment/cutting, blanketing, side drains, catch water drains, minor bridges, major bridges (excluding br.no.85 at km 37.080 i.e indravati bridge) , road over bridges (robs), road under bridgees (rubs), protection works, p.way track works with contractor's own material supplies including supply of track ballast, new wide based psc sleepers, special psc sleepers (for turnouts, improvised sejs, guard rails etc.), points (thick web switches) & wcms crossings, glued joints, h-beam/composite sleepers over girder bridges, improvised sejs, all p-way fittings, 2x25 kv ac ohe works, 2x25 kv tss with sp/ssp works along with scada, modification/conversion to underground for overhead electrical ht/lt power line crossings, electrical general services, construction of platforms, station buildings, service buildings, sp/ssp buildings, trd depot building with tower wagon shed, residential buildings, water supply, indoor and outdoor electrification etc. on epc basis in waltair division of east coast railway.

CTN :44403263

17 Mar, 2026 4.17 Lacs

Kolkata - West Bengal

Tender For maintenance of electrical installation & fans i/c com pound light, repair maintenance of pump sets, sub station for nsti-w(rvti), salt lake, kolkata during 2025-26. (sh: supply, installation, testing and commissioning of led fittings at room no. 208, 302, 212 & 211 including wiring of light point at first floor toilet and supply, installation, testing and commissioning of load bank at gf (ess. line) for proper power distribution).

CTN :44388658

17 Mar, 2026 2.84 Lacs

Kolkata - West Bengal

Tender For maintenance of electrical installation & fans i/c sub-station, compound light, lift at nsso building and guest house of nsso at mahalanobish bhawan, 164 g.l.t. road, kolkata 108 during 2025-26. (sh- replacement of damaged pole boxes, supplying, laying pole boxes, supplying, laying of street light / flood light cable and providing flood light luminaries and power plug etc.).subwork/packages:replacement of damaged pole boxes etc.

State Government

CTN :44256101

01 Apr, 2026 2.00 Crore

Chennai - Tamil Nadu

Tender For supply and laying of electrical cables on viaduct of cmrl metro corridors to power the advertisement hoardings on the piers and portals (porur junction metro station to kodambakkam powerhouse metro station) - supply and laying of electrical cables on viaduct of cmrl metro corridors to power the advertisement hoardings on the piers and portals (porur junction metro station to kodambakkam powerhouse metro station).

Series Reactor Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government / Public Sector

State Government