Latest servo hydraulic test machine item Tenders | Government servo hydraulic test machine item Tenders

State Government

CTN :43458956

26 Jan, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of point machine and various other items as per boq attached inspection rdso rites consignee. - supply of point machine irs type 220 mm stroke clamp type as per irs s$-24/2002 (amendment 1) or latest.(inspection agency:- rdso), supply of q-series led ecr (universal type i.e.qecx-61), 4f/4b complete with plug board(base plate), connectors, retaining clips etc. and conforming to brs: 941a sts / e / relays / ac lit led signal / 09 - 2002, amdt.-1 or latest and rdso spec.no.irs: s - 34, s- 23 or latest, as applicable. the interlocking code for this unit shall be "abdhk". (inspection by rdso)., contactor unit (qbca1 type), 24 v dc, 2hf / 4b complete with plug board (base plate), connectors, retaining clips etc and conforming to brs- 943 and rdso specn. no. irs : s - 34, s- 23, s - 60 or latest, as applicable. th e interlocking code for this unit shall be "bcejk". (inspection by rdso)., q-series magnetically latched neutral line relay (ql1 type), 11f / 4b, 24v dc complete with plug board (base plate), connectors and retaining clips and con forming to brs-935a and rdso specn. no.irs : s - 34, s - 23 or latest, as applicable. the interlocking code for this unit shall be "abdeg.(inspection by rdso)., supply of basic material to construct unit maintenance free earth as per rdso specs. no. rdso/spn/197 ver. 1.0 or latest to achieve a resistance less than 1 ohm. it consist of following:(a) copper bonded steel electrode of minimum 3.0 meter long, minimum 17.0 mm dia with copper bonding thickness of minimum 250 microns and ul listed and marked = 1 no. (b) earth enhancement material supplied in sealed bags of minimum 10 kg = 3 nos. (c) copper strip of 150x25x6 mm, to terminate earth rod = 1 no. (d) copper strip of 300x25x6 mm (meeb) = 1 no. (e) copper strip of 150x25x6mm (seeb) = 1 no. (ii) supply of 35 sq. mm multi strand single core pvc insulated copper cable as per is: 694 for connecting main earth electrode to meeb in the equipment room in duplicate. (minimum 10 meter.) (iii) supply of 16 sq. mm multi strand single core pvc insulated copper cable as per is: 694 for connecting meeb to seeb and spd to meeb (minimum 10 meter.) (iv) supply of 10 sq. mm multi strand single core pvc insulated copper cable as per is: 694 for connecting various equipments to seeb (v) supply of copper lug sleeve for 3/16 cable.(inspection by consignee)., supply of master telephone with voice logging facility for electronic lc gate telephone system as per specification no: rdso/spn/tc-51/2011 revision 3.0 with amendment no. 1 or latest. (inspection by rites)., electronic lc gate slave telephone system with voice recorder as per rdso specification no. rdso/spn/ tc/51/2021 revision 1.0 (inspection agency:- consignee), supply of centralized power supply system 24 volts dc power pack with 7ah mf battery for electronic lc gate telephone system as per rdso spec:- no. rdso / spn / tc / 51 / 2011 (rev. 3.0) amdt - 1 or latest.(inspection agency:- consignee), supply of optical power meter, type-b, as per tec spec. gr / opm - 01 / 03 feb. 2005 or latest. (make & model khushicom-k280) or similar branded make. (inspection by consignee)., supply and testing of optical laser light source of make- jdsu model- ols-35 or similar branded make.(inspection agency:- rites), supply of optical laser torch of reputed make. (make & model-proskit mt-7530) or similar branded make. (inspection agency: - consignee), supply of automatic fusion splicer for single mode optical fibre cable, along with accessories as per tec spec. tec/gr/tx/osm 001/04/sep-12 or latest of make superior/fujikura or similar. consignee shall approve the supply only after successful demonstration at site. (inspection agency:- rites), supply of otdr suitable for 1310/1550nm fiber with resolution of 60 cm, dynamic range of 314/29 db with all accessories for working on single mode optical fiber as per tec spec. tec/gr/tx/otd 001/05/sep-19 or latest, of reputed make like yokogawa/zdsu/viavi or similar. consi

CTN :43502833

23 Jan, 2026 NA

Darjeeling - West Bengal

Tender For supply of cnc lathe machine , 3 d printer , optical 3d scanner , laser cutting machine , tig welding machine , universal testing machine , coordinate measuring machine , workbenches with vices , power tools , battery test system , lithium ion cell grading machine , laminar flow station , ate , signal generator , spectrum analyzer , soldering desoldering station , multimeter and lcr meter , pcb etching and rework station , portable laser engraver , rugged laptop for cnc lathe machine laser cutter utm cmm cell grading system ate and signal generator , desktop based cad cam software , hardware for cad cam software , equipment stand , ergonomic chair , 3d printer large format , environment control and cooling unit , storage racks , vinyl backlit board , display unit , training videos , fire fighting equipment , 15 kva ups battery bank 02 ups 20 batteries per ups , 3d printing kits and raw material , cnc lathe raw materials , training and support , earthing and electrical work , electro static discharge management , air curtain , warranty and amc , fire detection systems for complete facility 20 x 30 sq mtr , accessories for r and d facility , stand fan , exhaust fan , extension board , stabilizer for cooling unit , window blinds with channel casing , multimedia projector , wireless hdmi transmitter , cctv system , digital photoframes , podium with mic , usb slide presenter , wireless mic for podium , audio device for trg , mfd multi function device , digital camera , vacuum cleaner , floor mats , stainless steel perforated bins , mosquito repellent machine , wall clock , water dispenser , wooden visitor table and chair , pigeon racks for storage ) /bid number : gem/2026/b/7086212 * /dated: 08-01-2026 & & / bid document 1 / 51

CTN :43464974

21 Jan, 2026 20.00 Lacs

Darjeeling - West Bengal

Tender For supply of machatronics research and development facility c c -cnc lathe machine , 3 d printer with scanner , laser cutting machine , tig welding machine , universal testing machine , coordinate measuring machine , workbenches with vices , power tools , battery test system , lithium ion cell grading machine , laminar flow station , ate , signal generator , spectrum analyzer , soldering desoldering station , multimeter and lcr meter , pcb etching and rework station , portable laser engraver , pc with ups for cnc lathe machine laser cutter utm cmm cell grading system ate and signal generator , desktop based cad cam software , hardware for cad cam software , 3d printer large format , environment control and cooling unit , display unit , 15 kva ups battery bank , 3d printing kits and raw material , cnc lathe raw materials , earthing and electrical work , accessories for r and d facility

CTN :42685704

09 Jan, 2026 55.79 Lacs

Nawanshahr - Punjab

Tender For bid to ras bid to ras supply of furniture items c c--laboratory table with boxes , steel almirah , steel almirah small , computer table , computer and printer table , office table executive table , lecture stand , revolving chair small , three seat sofa , drawing stool laboratory table with boxes:laboratory table with boxes : table size: 2400 mm length x1200 mm width x 800 mm height (+/- 10 mm) frame: 48 mm square ms pipe and 1. 2 mm thickness. storage boxes: two storage boxes with doors and standard locks made up of 0. 8 mm crca sheet (+/- 0. 1 mm), top: top made of water proof ply board of thickness 25 mm pasted with 0. 8 mm thick sun mica, handle: plastic concealed handle of black colour. edges: edges cover with 2 mm thick hot glue pvc lipping pasted with cnc machine, colour: top mica chocolate brown, frame legs brown and storage boxes of cream colour. coating: powder coating range 50-55 microns. , steel almirah:size:- height-1981mm, width-916 mm, depth 486mm,construction: - the almirah should have welded type construction. the thickness of back panel should be 0. 8 mm, other components the thickness should be 0. 9mm and the shelf thickness should be 1. 2 mm doors & handles: - the almirah should have full height steel hinged door & should be provided with handle. locking: - the almirah should be provided with 3 way locking mechanism & shooting bolt arrangement. shelves & load bearing capacity: - the almirah should have height wise adjustable shelf mounting and uniformly distributed load capacity per each full shelf should be 80 kg and shelves should be 4 in number and should be fully adjustable. powder coating process: - all the metal parts shall be given antirust surface treatment & and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final ) /bid number: gem/2025/b/6865848 * /dated: 10-11-2025 & & / bid document1 / 25finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a controlled temperature of 1800c to 2000c. manufacturer/ supplier must have iso- 9001, 14001, bifma & ohsas certifications. certificates should be attached. leveler:-it should have leveler with m10 screw type leveler with hexagonal plastic base. , steel almirah small :size:- height 1270 mm, width 765mm, depth 440 mm construction: - the almirah should have welded type construction. the thickness of back panel should be 0. 8 mm, other components the thickness should be 0. 9mm and the shelf thickness should be 1. 2 mm doors & handles: - the almirah should be provided with full height steel hinged door & should have handle. locking: the almirah should have 3 way locking mechanism with shooting bolt arrangement. shelves & load bearing capacity: - the almirah should have height wise adjustable shelf mounting and uniformly distributed load capacity per each full shelf should be 80 kg maximum and shelves should be 3 in number and should be fully adjustable shelves. powder coating process: - all the metal parts shall be given antirust surface treatment & and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a controlled temperature of 1800c to 2000c. manufacturer / supplier must have iso- 9001, 14001, bifma & ohsas certifications. certificates should be attached leveler:- it should have leveler with m10 screw type leveler with hex plastic base, computer table :computer table should have dimensions (mm) 900 x 750 d x 730 with +- 10mm tolera

State Government

CTN :42721443

15 Jan, 2026 26.82 Lacs

Bhavnagar - Gujarat

Tender For corrigendum : procurement of positive material identification (pmi) machine for metallurgical testing at bltps, gsecl.

Central Government/Public Sector

CTN :43365433

20 Jan, 2026 20.00 Lacs

Barmer - Rajasthan

Tender For material and labour for conducting rrs exercise in tech area at af stn utarlai - m&l for broken stone boulders of granite/ trap or basalt stone of size exc exc 100mm but not exc 450 mm including surface dressing of stacking ground & stacked properly all as specified., supply only granuler sub base delivered to any location in technical area & stacked properly including surface dressing all as specified and as directed., supply only wet mix macadam delivered to any location in technical area as per design mix approved by ge and conforming to is - 2286 all as specified.(rolling and spreading to required amber will be paid seperately.), m&lfor cationic bitumen emulsion ssi grade conforming to is 8887 delivered to any location in technical area complete all as specified and directed. (charges for bitumen emulsion machine stand ideal and working at site will be paid separately ), m&l for lime unslaked, fat or magnesium powder at rrs exercise location in packed hdpe bags all as specified and approved. (charges for labour stand ideal and working at site will be paid separately ), m&l for bituminous premix dense asphaltic concrete- i (dac-i) using paving bitumen grade vg 30 @ 6% by weight of total mix delivered to any location in technical area as per approved design mix by ge all as specified and directed.(charges for labour , paver roller and other required machinary for stand ideal and working at site will be paid separately ), supply only test report only job design mix formula for dense asphalt concrete - i as per specification of para 20.b.4 of mes ssr part-i of 150 mm thick (50 mm thick each layer) obtained from approved lab including supply of material required for job mix formula to lab and payment of testing charges to approved lab complete all as specified and directed, supply test report only job design mix formula for wet mix macadam as per specification of para 20.b.5 of mes ssr part-i of 200 mm thick obtained from approved lab including supply of material required for job design mix formula to laboratory and payment of testing charges to approved laboratory complete all as specified and directed, hiring of mechanical asphalt paver finisher of capacity 150 to 200 tons/hour for laying of dense asphalt concrete and wet mix macadam all as directed. (note : rate to be quoted by contractor for vehicle/plant when working at site) ., hiring of mechanical asphalt paver finisher of capacity 150 to 200 tons/hour for laying of dense asphalt concrete and wet mix macadam all as directed. (note: rate to be quoted by contractor for plant when stand idle in standby condition in tech area/rrs exercise site ), hiring of vibromax power roller of capacity 8 to 12 tonne capacity for rolling/compaction of stone boulder, gsb and wet mix macadam all as directed.(note : rate to be quoted by contractor for vehicle/plant when working at site) ., hiring of vibromax power roller of capacity 8 to 12 tonne capacity for rolling/compaction of stone boulder, gsb and wet mix macadam all as directed.(note: rate to be quoted by contractor for plant when stand idle in standby condition in tech area/rrs exercise site ), hiring of double drum smooth vibromax power roller of capacity 8 to 12 tonne capacity for rolling/compaction of bitumenious layer of dense asphalt concrete (dac-i)only all as directed.(note : rate to be quoted by contractor for vehicle/plant when working at site) ., hiring of double drum smooth vibromax power roller of capacity 8 to 12 tonne capacity for rolling/compaction of bitumenious layer of dense asphalt concrete (dac-i)only all as directed(note: rate to be quoted by contractor for plant when stand idle in standby condition in tech area/rrs exercise site ), hiring of generator 5 kva (trailor mounted) with all electric connection accessories to electric output units installed to any location in technical area all as directed.(note : rate to be quoted by contractor for vehicle/plant when working at site) ., hiring o

CTN :43322060

20 Jan, 2026 NA

Gurgaon - Haryana

Tender For supply of ductable ac 8.5 tr , refrigerant piping as above for 8.5 tr machine , drain piping 25 mm dia , supply and fabrication of ms structure to support the machine, outdoor and ducting , control cable , power cable 4c x 6 sqmm , power cable 4c x 50 sqmm , ms cable tray 50 x 100 x 50 x 1.6 mm , 22g oval ducting , supply of fire-retardant flexible canvass connections , supply of anodized extruded aluminium supply air double louver grills with volume control damper , supply of electrical panel with 1 no suitable capacity incomer and 6 nos suitable rating outgoing feeder for ductable units , providing of outdoor stands duly painted , providing of ss 304 drain tray under the ductable units , supply of portable air conditioner capacity 1 tr , installation testing and commissioning charges , freight charges including packing forwarding, transportation, insurance and unloading of material

Central Government/Public Sector

CTN :43306328

13 Jan, 2026 NA

Bangalore - Karnataka

Tender For tender for supply of sitc of air conditioner : : -supply installation testing and commissioning of 2tr 24000 btu per hour minimum bee 3 star rated confirming to is 1391 part 2 2018 inverter type cassette split ceiling mount air conditioner having wireless remote controller led display for indoor unit motorized vertical horizontal swing controls air filters auto restart with memory features inbuilt drain pump rotary scroll hermetically sealed compressor and initial charge of eco friendly refrigerant condensor and evaporator coils of copper material suitable for operation on 230v 10 single phase 50hz ac power supply. the indoor unit shall be suspended from the ceiling using threaded rods- including clamps bolts nuts etc and the outdoor unit shall be mounted on floor complete as required. , supply installation testing and commissioning of 2tr 24000 btu per hour and iseer value five star rated and compliance with is 1391 part 2 2018 wall mounted inverter type hi wall split cooling inverter air conditioner having wireless remote controller with led display hermetically sealedscrollrotary compressor and eco friendly refrigerantinitial charge of refrigerantcondensor and evaporator coils of copper material air filter with auto swing auto restart features suitable for operation on 230v single phase 50hz ac power supply. the indoor unit shall be fixed rigidly on wall using necessary frame the outdoor unit shall be mounted on floorlaying and interconnection of standard-length copper refrigerant piping as supplied by the oem between indoor and outdoor units complete in all respects as required. necessary drilling of hole and finishing the same to match for the surrounding as required. , supply and laying of soft drawn copper refrigerant pipe of suitable size for 2tr air conditioners for interconnection of suction and liquid lines between indoor and outdoor unit with tubular thermal foam insulation including necessary brazing jointing etc as required for cassette split air conditioner as required for item no. 1 2 , supply laying of 4c x 2.5 sqmm frls pvc insulated 1.1 kv grade pvc sheathed multistrand flexible copper cable confirming to is 7098 pt 1 1988 along with the refrigerant lines for connecting indoor and outdoor units , supply and fixing of 25 mm dia minimum thickness of 1.2mm pvc drain pipe along with accessories and necessary clamps with an u trap at the end as required. , supply and fixing of 75mm dia minimum 1.8mm thickness pvc covering pipe using necessary bend collor clamps threded rod supports accessories etc for laying copper refrigernt line electrical cable and drain line as required. , supply and installation of floor mounted powder coated ms 25x25x5mm l angle frame including clamps bolts nuts vibrating dampers as required for mounting of outdoor unit. , drilling of hole using core cutting machine of size up to 100 mm dia in concrete stone wall ceiling for laying refrigerant lines etc and finishing the same with cement mortar to match for the surrounding as required after laying , dismantling shifting of old 2tr cassette split air conditioner having indoor and outdoor units associated refrigerant pipes electrical wires and drain pipes including pump down of refrigerant. , making of necessary alteration of existing gypsum false ceiling for installation of cassette air conditioner indoor units including necessary aluminium channel support gypsum board necessary accessories including painting to match for the existing false ceiling.

Servo Hydraulic Test Machine Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector