Latest shaft pinion Tenders | Government shaft pinion Tenders

CTN :40031388

07 May, 2025 NA

Budgam - Jammu And Kashmir

Tender For supply of fuse,bonnet telescopic,for wheel drive,assy service indicator,air filter,oil filter,ac filter,fuel filter,wiper motor gear,pinion with bearings,rear view mirror rh,gear box main shaft,bearing tapped roller,assy clutch disc,release fork,release bearing,shock absorber,door lock rh,key,minor clutch repair kit

State Government

CTN :39887512

22 Apr, 2025 40.00 Lacs

Karunagappally - Kerala

Tender For corrigendum : supply of mechanical spares - kerafed oil complex karunagappally, sprocket, sprocket, sprocket, sprocket, sprocket, chains, gear, gear, gear, gear, gear box, gear box, gear box, shaft, shaft, cage bar, cage bar, spacer, spacer, spacer, ms bar, rod, blade, elevator bucket, conveyor rail, conveyor rail, worm set first chamber, collar, forward worm, forward worm, forward worm, forward taper worm, worm set second chamber, collar ( taper), forward worm, collar ( taper), forward worm, reverse worm, forward worm, collar, taper collar, collar, collar, cone bush, cone, cone, conveyor, bolt, clambing bar, cente ring, ring, conveyor chain, side bar, kerafed coconut complex naduvannur, first stage worms, forward worm, forward worm, forward worm, forward worm, forward worm, forward worm, forward worm(tapper), first stage collars, collar, collar, collar, tapper collar, tapper collar, tapper collar, tapper collar, bush, bush, cone 8 1/2" length, flywheel shaft(first stage), expeller main shaft, second stage worms, quill worm, forward worm, forward worm * 50% stepped id 90,85, forward worm, forward worm, second stage collars, collar, collar, collar, tapper collar stepped id 90,85, collar, tapper collar, cone bush, flywheel shaft(second stage), expeller main shaft - second stage, gears for mark v expellers, bevel pinion, bevel pinion, bevel gear 42 teeth, 12 teeth shaft pinion, main gear(helical), goyam expeller worms, forward worm, forward worm, forward worm, forward worm, forward worm, forward worm, bush, cone, tapper collar, tapper collar, tapper collar, tapper collar, plain collar, plain collar, plain collar, cage bars (taper), cage bars (straight), cage bars (straight), elevator bucket with out holes, elevator bucket with out holes, elevator bucket with out holes, elevator bucket with out holes, cutter blade (hammer mill), redler conveyor link, redler conveyor link, bucket elevator chain (2, 7, 18), bucket elevator chain (10, 15 & 22), sieve for hammer mill machine, sprocket, sprocket, sprocket, sprocket, sprocket, sprocket, sprocket, sprocket, sprocket

CTN :39984151

22 Apr, 2025 17.70 Lacs

Jaipur - Rajasthan

Tender For supply of spare parts/consumables of semi-automatic bottling line machines - (a)list of fast moving parts of semi-automatic line ( s.s. make & engineer india mark ) supply of spare parts/consumables 1 vacuum filling machine, level control rubber washer assoited size, sponge washer black, nozzle inner washer (for s.s. m/c) flat, o ring (for s.s. m/c) (assoited size), s.s. nozzle outer and inner set-28 mm complete (for s.s. & engineers india make machines ), teflon nozzle outer and inner set-28 mm complete (for engineers india), n.r.v. complete set for (for s.s. make machines), n.r.v. complete set for (for engineer india make m/c ), glass tube indicator for (for engineer india mane m/c), three way valve for filling m/c, filling m/c belt (b-32), vacuum pump oil level indicator 3 mm thick, vacuum pump rotor blade, vacuum pump oil seal, vacuum pump filter with nipple (brass), three way valve teflon washer, 2 p.p. cap sealing m/c, theard roller, skrit roller, skrit roller washer/spring/lock, theard roller spring/lock, thrust bearing, arm set four pin complete with roller etc., planzer for adjust of roller, side cam roller complete set, side cam roller nut/bolt only, side cam arm set complete with spiring, side cam arm tension spring, clamping spring, taper pin, head return spring, base pressure spring (for s.s. make), base pressure spring (for engineers india, leading screw complete with cheak nut, pressure noze 28 mm (for s.s. make ), pressure noze 25 mm (for s.s. make ), pressure noze 28 mm (for engineers india ), pressure noze 25 mm (for engineers india ), 6x6 gurev screw, 5/16x1" allan bolt, wavell pinion gun metal (30 teeth ), l key wavell pinion suitable for ssp/ee machine, closing camp brass bush gun metal, wavell pinion guide screw, oil cap, rubber pad, bottle guide with nut (aluminum), gear box bush with key (for s.s. make ), gear box shaft, gear box 12 teeth gear tempered with shaft and keys, gear box 72 teeth gear, gear box 88 teeth gear, pressure plat only with nut and bolt, 3 slat chain conveyor, sprocket 21 teeth gear black (for s.s. make m/c ), sprocket 19 teeth with bearing ( for engineers india make m/c, sprocket 19 teeth without bearing ( for engineers india make m/c, bearing uc 205 with cover, bearing uc 206 with cover, bearing 6205, z type green strip suitable for ssp/ee (per feet), chain adjuster nut bolt, chain adjuster complete set with bracket and nut/bolt, slat chain nylon roller (ssp/ee), idler nylon roller for single slat chain (ssp/ee), double slat chain 21 teeth sprocket mounting shaft with keys (ssp), slat chain nylon polly mounting shaft (ssp/ee), variator set complete(gear box+ variator+2hp motor), side plate ss flat with green strip complete (per feet), 40 teeth bronze gear for ( greaves gear box ) ee, transfer plate (ssp/ee), 4 packing belt conveyor, bearing 6006 dz, comb for packing belt 12" wide 35 no., packing belt gear box adjuster pulley, packing belt patta 12" wide 5 mm thick, 5 ply nylon/ cloth(per feet), packing belt roller (nylon), 5 filter press m/c, filter pad/ filter cloth, 6 label printing m/c ( supplied by ssp & eng. india ), rubber for aluminum roller, adjuster rubber, chain timing with naka, aluminum roller, assorted size for ssp machine, 7 label gumming m/c, finger for label gumming m/c, 8 rinser machine, nozzle for rinser m/c ( engineer india & s.s. make m/c ), pocket ( bottle holder ) for engineer india make m/c ), teflon disc for engineers indin make m/c, 9 wet glue machine, massage press plate 5" wide x 68" length of auto wet glue labeling machine, pressure belt 1" wide x 40" length of auto wet glue labeling machine, foam space l-25 "x w-5" for auto wet glue labeling machine, bearing 6205, bearing 6206, bearing 6208, chamber bearing 6907, magzine finger for auto wet glue labeling machine (8 set), male/female of pick up cylinder for auto labeling machine(16 set), pick up cylinder can (8 set) for auto labeling machine, pick up cylinder finger (8 set) for auto label

CTN :39963003

21 Apr, 2025 4.07 Lacs

Bardhaman - West Bengal

Tender For removal of failed bearing worn out hub-coupling of pinion side and brake hub from failed armature shaft of drag motor and fitment of new bearing, hub coupling of pinion side and brake hub in repaired armature shaft of drag motor of 7820 dragline.

CTN :39970908

30 Apr, 2025 NA

Durg - Chhattisgarh

Tender For custom bid for services - 30 mw & 14 mw tg miscellaneous works at nspcl-bhilai power plant-2- 10.10 tmstu61bd000 steam tur(bearing pedestal)attend defect: 1. take permit to work from concerned person., 2. remove control valve linkages, oil piping and other connections from the pedestal., 3. remove front pedestal top cover., 4. clean front pedestal housing., 5. take measurement as per instruction of eic. (involves checking of pinion shaft/gear, assembly, main oil pump gear wheel, gov. assembly & checking the backlash of gears.), 6. attend the defect/trouble shoot the problem in front pedestal as per instruction of eic., this includes the following work beside defect attending as per instruction of eic., 7. dismantle pinion shaft and record the alignment w.r.t to the gov. assembly., a) dismantle mop (main oil pump) bearings and gear., b) do servicing of mop and replace damaged items., c) dismantle governor assembly (consists of gop-governing oil pump and other, elements)., d) do servicing of gop and replace damaged items., e) assemble mop and governor assembly., f) put governor assembly in position., g) do alignment of the pinion shaft w.r.t to governor assembly., h) put electronic over speed shaft (pinion shaft) in position., i) put mop assembly in position., j) record backlash of gears and if requires, do adjustment., 8. measure the clearances of first three rows of oil gland fins & its servicing, 9. assembly of oil gland segments (new or old) and setting of clearances., 10. after the work, box up front pedestal top cover., 11. link control valve linkages, oil piping etc., 12. do rig test for setting governing characteristics., 10.20 tmstu56oh000 steam tur (bearings) serv- 1. take permit to work from concerned person., 2. remove control valve linkages, oil piping and other connections from the pedestal., 3. remove front pedestal top cover., 4. check bearing interference, toc, soc etc., 5. remove turbine front bearing top & bottom halves., 6. do the dpt and ut of turbine bearing., 7. check thrust bearing pads and do dpt, ut and blue matching., 8. check toc, soc, bearing interference of bearing after servicing., 10.30 tmstu01bd794 steam tur (<=30mw#) repl-gland- 1. removal of first 2 rows of hp front steam gland segments., 2. servicing of (new or old) gland segments and springs., 3. measurement of dimensions and machining of gland segments if required., 10.40 tmtgs01bd701 turbine gov. sys (<=30mw#) maintenance- i) attending passing defect in four nos. steam control valves, ii) servicing of two nos. hydraulic servomotors (including relay gear) of control valves, iii) inspection & servicing of speed governor and setting its governor characteristics (rig test)., iv) inspection & servicing of cies valve (left & right)., 1. ensure ptw from concerned person., 2. breaking of insulation around steam control valves & removal of debris from site., 3. dismantle linkages and decouple all four nos. control valves from spring box assembly, 4. remove spring box assembly from position., 5. dismantle bonnet bolts & remove all four control valves., 6. check blue contact / kerosene test of plug with respective seats., 7. do lapping of all control valves, replace plug/other components, if required., 8. assemble all control valves and tighten bonnet bolts., 9. servicing of cies valves (left & right), 10.servicing of spring box assembly hinges & pins etc., 11.place spring box assembly & couple all control vales with spring box., 12. servicing of two nos. hydraulic servomotors of control valves., 13. servicing of primary relay oil cylinder for checking for excessive draining of oil. replacement of relay gear power, piston if needed., 14. servicing of secondary relay., 15. servicing of linkage., 16. replacement of steam leak-off and impulse line pipes as per eic instruction. dp test of welding joints are to be, carried out., 17. inspection of speed governor, assessment of its component s healthiness, repl

CTN :39279105

17 Apr, 2025 3.64 Lacs

Bardhaman - West Bengal

Tender For corrigendum : tender for supply of esp crm gearbox spare - gb pbl model 63c 32 point 1p d71l4 o p shaft , gb pbl 63c 32 point 1p d71l4 gear wheel iind , gb pbl 63c 32 point 1p d71l4 pinion 1st , gb pbl 63c 32 point 1p d71l4 output shaft , gb pbl 63c 32 point 1p d71l4 gear wheel 1st , pbl 63c 32 point 1p d71l4 pinion shaft iind , pbl 63c 32 point 1p d71l4 intermediate ring , gb pbl 63c 32 point 1p d71l4 thrust cover , gb pbl 63c 32 point 1p d71l4 motor gasket , gb pbl 63c 32 point 1p d71l4 distance piece , pbl model 63c 32 point 1p d71l4 circlip set , pbl model 63c 32 point 1p d71l4 2nd pinion , gb pbl 63c 32 point 1p d71l4 2nd gear wheel , pbl model 63c 32 point 1p d71l4 2nd pinion , pbl 63c 32 point 1p d71l4 2nd gear wheel 2nd , pbl 63c 32 point 1p d71l4 2nd pinion 3rd , pbl 63c 32 point 1p d71l4 2nd gear wheel 3rd , pbl 63c 32 point 1p d71l4 2nd dista piece set , pbl 63c 32 point 1p d71l4 oil seals 30x50x7

Central Government/Public Sector

CTN :39950242

17 Apr, 2025 NA

Multi City - Multi State

Tender For profile checking gauge [p value] with feeler gauge for bull gear 107 teeth [mating shaft pinion 21 teeth] for wag-9 loco. feeler gauge size 0.20mm-0.25mm-0.30mm-0.35mm and 0.40mm. ref rdso drg. no. sk.dp -3848. material -tool steel -is-3748/90, hardness -40/45 hrc and supply with calibration certificate.

CTN :39897291

22 Apr, 2025 NA

Leh - Jammu And Kashmir

Tender For tender for supply of lv7/t-815(4x4)443-400-193-000switch l 16.003 seuffer , lv7/t-815(4x4)443-839-007-000relay - v231 - a 0053-c 643 , lv7/t-815(4x4)443-115-187-340starter motor(24v 8kw waterproof) , lv7/t-815(4x4)443-411-151-000speedometer , lv7/t-815(4x4)483-bd-020-72canopy (4x4) , lv7/t-815(hmv)443-853-023-0warning light switch , lv7/t-815(hmv)442-073-900-764steering booster , lv7/tata2641-3010-7701cover (for accl pedal) , lv7/tata2614-6250-0105assy face side rh , lv7/tata2154-8110-6903grab handle rh , lv7/tata2154-8110-6902grab handle lh , lv7/tatadld-nnk-18-19brass nozzle 40mm with male coupling , lv7/tatatata-0000-0043c.e. bracket assy , lv7/tata257335603111bearing tapered roller outer , lv7/tata2614-6250-0104assy face side lh , lv7/tata17672-03-000filter fuel , lv7/tata5330-381927input shaft seal kit , lv7/tata3110-108006bearing tappered roller , lv7/tata033-000-1040solenoid , lv7/tata269126207910speedo pinion (rear cover (upper)) , lv7/tatal01402000027solenoid switch , lv7/tata264382400101wiper motor 24v , lv7/tata3122841020shifter shaft , lv7/tatatata00000032fixing bracket assy , lv7/tata2154-4290-0131assy pipe (to air gauge i) , lv7/tatat06560000053assy flywheel , lv7/tata2641-2910-0173fluid container (clutch) , lv7/tatatata-0000-0027engaging lever , lv7/tata5895-022024cover electronic blinker glass lh , lv7/tata62120300127lamp 12v 2w , lv7/tmb3501-1417-190double ended tubular box spanner 17x19 i , lv7/tmb3030-003093 v belt (cogged 980 ig) , lv7/tmb2704-4680-0120assy high pressure hose , lv7/tmb5365-001000bushing , lv7/tmb257442910161brake hose , lv7/tmb1468-336-671distributor head , lv7/tmb2574-2500-0001driven disc&cover assy , lv7/tmb2751-1540-6515pole screw , tata 1015tc/42278609119903separator fuel water , tata 1015tc/42278609139910a/filter element primary

CTN :39872770

26 Apr, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of complete gear box model h1-200, ratio 1.75 by 1, p1 , input shaft , pinion , wheel , input oil seal , output oil seal , complete gear box model h2-160, ratio 15.4 by 1, p1 , input pinion shaft , 1st stage wheel , final pinion shaft , output wheel , input oil seal , complete fluid coupling wdfc-410 , impeller , runner , casing , shaft , fusible plug , washer for fusible plug , multi disc unit , mdu bolt , spherical collar , mdu nut , flexible coupling , filing plug , runner half coupling , outer half coupling , oil seal for casing , oil seal for chamber , complete fluid coupling pst-530 , impller , output shaft , output connecting coupling , input connecting coupling , motorized oil circulation pump , oil seal , breather , hose pipe set 1 set consist 2 numbers , scoop tube complete ccw 530 pst , scoop tube complete cw 530 pst , suction strainer , y type filter , filling or drain plug , oil level window bid number/ & ( * ) : gem/2025/b/5954214 dated/ + : 29-03-2025 bid document/ 3 3 1 / 45

Central Government/Public Sector

CTN :39755963

14 Apr, 2025 NA

Mughalsarai - Uttar Pradesh

Tender For supply of 21 teeth shaft pinion for wag - 9 loco. specn./drg. no. - as per rdso drg. no. - skdp-3847 alt 1 with latest. specn no. - rdso spec. no. mp.o.2800.19 (rev 01) june 2019 with latest, str no. - clw/2022/eldo/m/str/0132 rev 0 with latest.

Shaft Pinion Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector