Latest shank scrap Tenders | Government shank scrap Tenders

Central Government/Public Sector

CTN :43799920

10 Feb, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of alarm monitoring system ams with software as per tts , control panel with 15 inch ams display and yard supplied equipment in switchboard room bulk head mounted as per tts , display of 12 or 15 inch flush mounted on bridge console display size will be confirmed during detail design as per tts , power supply to the displays is either from individual 230v ups or from common 24v dc ups as per design and tts , audio visual high intensity flashing beacon as per tts , i o cards digital analog digital counter rpm rtd serial link etc network switches etc as per design and tts , alarms printer as per tts , ups with batteries cum dc distribution board of suitable capacity refer clause 8.2 as per tts , addressable fire detection and general alarm system as per tts , combination detector smoke or heat or rate of rise temperature or uv-ir or optical with base and mountings as per tts , heat detector with base and mountings as per tts , flame detector with base and mountings as per tts , indoor manual call points with mountings as per tts , outdoor manual call points with mountings as per tts , general alarm push button with cover to avoid accidental activation with mountings as per tts , sensors or switches for monitoring door status open or close as per tts , bilge level float switches as per tts , high level float switches side mounted for fuel oil tanks as per tts , high level float switches top mounted for dirty oil tank as per tts , temperature transmitter as per tts , pressure transmitter as per tts , supporting accessories wt junction boxes cable connectors glands interface converters power supply converter with auto transfer switch galvanic isolators , special cables refer clause-11 as required as per tts , obs list of spares and qty as required as per tts , special tools and commissioning spares as required as per tts , class inspection charges as lumpsum , documentation drawings certificates installation operational and maintenance manuals as per tts , service support for training testing commissioning and trials as lumpsum , any other item not included above however the same would be required for proving the system during commissioning or hats or sats as required as per tts , man day rate for deputing service engineer beyond lump sum cost due to delay beyond control of supplier

CTN :43618110

03 Feb, 2026 NA

Darjeeling - West Bengal

Tender For bid to ras supply of 1100 volts grade in green colour for earthing , pvc frls copper cable pvc 2 point 5 sqmm sc multistranded , pvc sheathead frls copper cable 1 point 5 sqmm single core with multistrand 1100 volts grade , decorative type ultra slim linear led tube light fitting 18 watt as per brief technical specification , led securrity light energy saving 24watt led 600k with security light bracket of 40mm dia gi pipe light grade bend in 45 degree angle , casing capping 3 by 4 inch length 10feet size , pvc casing capping tee 3 by 4 inch , pvc casing caping coupler of size 3 by 4 inch , ceiling rose 2 to 3 terminal , switch piano type 5 amps , switch socket combination mutipurpose 5 amp 5 pin with gang box , switch socket combination mutipurpose 5 amp 3 pin and 3 pin 15 amp with gang box , pvc elbow 3 by 4 inch for casing caping , tape insulation 10 mtr , pvc switch board 7 inch x 4 inch , pvc swith board 6 inch x 8 inch , pvc square block , mcb db spn 8 ways double door 240 volts with aluminium bus bar , mcb 6 amps sp 240 volts , mcb 16 amps single pole 240 v , mcb spn 40 amps dp 240 volts , exhaust fan havey duty ms body 300mm sweep with louver shutter , bib tap cp 15mm bore , stop cock cp 15 mm , pillar cock stainless steel cp 15 mm bore , chromium plated two way bib tap and health faucet with flexible pipe and clamp , ppr pipe 20mm 3 layer , ppr pipe 25mm 3 layer , ppr tee 20 mm dia , ppr tee 25 mm dia , ppr elbow 90 degree 20 mm , ppr elbow 45 degree 20 mm , ppr elbow 90 degree 25 mm , ppr elbow 45 degree 25mm , ppr socket 20mm dia , pvc socket 110 mm , pvc elbow 110 mm dia , pvc tee 110 mm , ppr union 20 mm , pvc float valve heavy duty 25mm dia suitable for ppr pipe , ppr male threated socket 20 to 25mm dia , ppr female threated socket 20 to 25mm dia , ppr male threated elbow 20 to 25mm dia , ppr reducer socket 25 x 20mm , m seal , pvc elbow 2 inch , pvc socket 2 inch , pvc pipe 2 inch dia 6 mtr long , pvc floor trap 4 inch dia with grating 2 inch outlet , pvc socket 4 inch , pvc elbow 4 inch dia , pvc pipe 4 inch dia 6 mtr long , pvc grating 4 inch dia , pvc clip for ppr pipe 25mm dia , ppr tank connector 25 mm , vitreous wash hand basin, white, 550 mm x 400 mm flat back as per brief technical specificaion , ewc vitreous wash down water closet pan pedestal pattern white pan p or s trap as per technical specification , pvc flushing cistern 10 ltrs capacity with pvc connection 600mm long and waste pipe cp angle cock 15mm external thread and pvc pipe , pre fabricated septic tank of 1000 ltrs capacity septic tank shall be anchored with hold , pre fabricated sokage pit 500 ltr capacity soakge pit shall be anchored with hold fast , pvc p trap 110 x 75mm , pvc elbow 3 inch , pvc socket 3 inch , pvc pipe 3 inch dia 6 mtr long , pvc tee 3 inch , jointing resin solution of 1 kg or capsules of silicone gel with gel gun for leak proof , towel rail cp 600mm long complete with fitting oblique fixture , soap dish stainless steel chromium plated complete with fittings oblique fixture etc , electric storage water heater geyser 15 ltr capacity 1 point 5kw vertical type including fixing arrangement on puf wall , flexible connection pipe 450 mm long for hot and cold water , lightening conductors set complete with all accessories as per brief technical specification , elect earthing set completd as per brief technical specification , ppr female threated elbow 20 to 15mm dia , ppr male threated socket 20 to 15mm dia , ppr female threated socket 15 to 20mm dia , wastebin 120 ltr dim of 480 x 550 top o d , water dispencer of 15 ltr capacity single phase 230 v point 50 hz three temp taps hot normal and cold with //bid details 2 / 65 refrigerator with 20 litter bottel , invertor 2kva capacity with 02 battery 24v each battery 12v capacity complete with all accessories including connected electrical items and tools , electrician tool kit , plumbing tool kit , measuring fibre glass tape 5 mtr long , industrial safety helmet , showel square nose

CTN :43792148

09 Feb, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of general scrap/disposables, metallic, non-metallic, useable vehicles, lube / waste oil - this auction is for disposal of scrap laboratory items, scrap furniture, scrap electrical and electronics items and other workshop tools and accessories that are not in use.

State Government

CTN :43792100

06 Feb, 2026 4.70 Lacs

Jaipur - Rajasthan

Tender For procurement of “crimping tools, wire strippers, removal/insertion tools, and other crimping tool accessories

Central Government/Public Sector

CTN :43775787

09 Feb, 2026 NA

Patratu - Jharkhand

Tender For supply of mobile crane farana type for ntpc lara talcher and patratu projects d d - lara- mobile crane farana type as per technical specification , lara- maintenance tools and tackles , laracommissioning spares , lara- accessories , lararegistration, insurance and handing over to end customer , talcher- mobile crane farana type as per technical specification , talcher- maintenance tools and tackles , talcher- commissioning spares , talcher- accessories , talcher- registration, insurance and handing over to end customer , patratu- mobile crane farana type as per technical specification , patratu- maintenance tools and tackles , patratu- commissioning spares , patratuaccessories , patratu- registration, insurance and handing over to end customer

Central Government/Public Sector

CTN :40855523

02 Feb, 2026 NA

Anpara - Uttar Pradesh

Tender For bid to ras corrigendum : supply of 3 x 2000 kva emergency dg set and accessories for singrauli stpp stage iii 2x800mw - 2000 kvae 1500 rpm, 415v, 0.80 pf -lag , prime power dgset with radiator on common base frame , fuel day tank of990 litres capacity with accessories , 24v dc, 360ah,minimum, lead acid automotive type battery , 24 v dcfloat cum boost battery charger , necessary fuel pipingfrom day tank to engine , exhaust piping , with insulationand aluminium cladding upto 30 meters height withsupports , galvanised pre-fabricated support structure forexhaust piping -common for two dg , galvanised prefabricated support structure for exhaust piping-for one dg ,acoustic enclosure for one dg with ventilation fans, exhaustfans, if applicable and lighting fixtures. , lt power, controland instrument cable including all accessories like lugs,glands, ties etc . , b-check kit to be supplied at the time ofcommissioning , first fill of lube oil, coolant and coolantconditioner to be supplied at the time of commissioning ,tools and tackles for offered dg set. , alternator phase sideand neutral side terminal box with ct , mandatory sparesfor dg sets and panel , amf panel , supervision of erectionfor one dg set. , supervision of testing, commissioning andload trial of one dg set. , total freight charges for allsupplies including spares

Central Government/Public Sector

CTN :43769719

04 Feb, 2026 NA

Dibrugarh - Assam

Tender For procurement of supply of open hole logging units with tools and accessories alongwith installation & commissioning, training and annual maintenance contract (non comprehensive) for 10 years

Central Government/Public Sector

CTN :43629726

09 Feb, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of electro hydraulic operated anchor windlass cum towing winch equipment , onboard spares , spares for installation and commissioning , special tools and accessories for commissionig , documentation charges , classification society inspection and certificate charges , onboard training charges

State Government

CTN :43410887

10 Feb, 2026 10.00 Lacs

Kollam - Kerala

Tender For corrigendum : supply of tools diagnostic devices/ workshop equipments spare parts to farm machinery clinic, kollam. (annual plan 2025 26 support to farm mechanization) - part 1-hand tools, mechanic tool setsupplying a comprehensive professional-grade the mechanics tool kit with a durable, impact-resistant moulded suitcase (bmc case) with designated compartments for each component, ensuring easy portability and organization and includes the chrome-vanadium tools and accessories listed as appendix 11. 1/2" drive set a) hexagonal socket (19 pcs) sizes: 8, to 32 mm b) star socket (5 pcs) sizes: e10, e12, e14, e16, e20 c) flex handle (1 pc) length: 375 mm d) ratchet wrench (1 pc) 1/2" drive, 45 teeth (reversible) e) extension bars (2 pcs) lengths: 75 mm (3"), 250 mm (10") f) universal joint (1 pc) 1/2" drive g) three-way adaptor (1 pc) 1/2" female 3/8" male h) spark plug sockets (2 pcs) sizes: 16 mm and 21 mm i) l-handle (1 pc) 1/2" 10" 2. 3/8" drive set a) 12-point socket (15 pcs) sizes: 6, to 22 mm b) ratchet wrench (1 pc) 3/8" drive, 45 teeth (reversible) c) extension bars (2 pcs) lengths: 75 mm (3"), 150 mm (6") d) universal joint (1 pc) 3/8" drive 3. 1/4" drive set a) screwdriver bits (26 pcs, 25 mm length, s2 steel) b) phillips (ph): ph0, ph1, ph2, ph3 c) pozidriv (pz): pz0, pz1, pz2, pz3 d) slotted (sl): sl4, sl5.5, sl7 e) hex (h): h2, h3, h4, h5, h6, h7, h8, h10 f) torx (t): t10h, t15h, t20h, t25h, t27h, t30h, t40h g) bit holder (1 pc) 1/4" hex h) hexagonal sockets (9 pcs) sizes: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 mm i) star sockets (5 pcs) sizes: e4, e5, e6, e7, e8 j) ratchet wrench (1 pc) 1/4" drive, 45 teeth (reversible) k) extension bars (3 pcs) lengths: 50 mm (2"), 100 mm (4"), 150 mm (6") l) universal joint (1 pc) 1/4" drive m) three-way adaptor (1 pc) 3/8" female 1/4" male n) spinner handle (1 pc) 1/4" 150 mmo) flexible extension bar (1 pc) 1/4" 150 mm 4. combination spanners (17 pcs) sizes: 6, to 24 mm 5. flare nut spanners (5 pcs) sizes: 8 10, 10 12, 11 13, 12 14, 17 19 mm 6. hex key set (10 pcs) sizes: 2.5, 3, 4, 5, 6, 7, 8, 10, 12, 14 mm 7. machinist hammer (1 pc) 300 g with fiberglass or wooden handle 8. combination pliers (1 pc) 7" 9. locking pliers (1 pc) 10" curved jaw lock wrench 10. slotted screwdrivers (2 pcs) sl6.5 100 mm and sl6.5 150 mm 11. phillips screwdrivers (2 pcs) ph2 100 mm and ph2 150 mm 12. stubby screwdrivers (2 pcs) ph2 38 mm and sl6.5 38 mmall sockets, spanners, and ratchets shall be made from chrome vanadium steel (cr-v), heat-treated, and chrome-plated for corrosion resistance. screwdriver bits shall be of s2 alloy steel for high torque resistance. ratchets shall have a minimum of 45 teeth with a quick-release and reversible mechanism. all tools shall conform to din / iso standards or equivalent. suitcase colour should be standard industrial colour (black / blue / grey or similar)- preferably tapariya or eastman, tee spanner set including spanners ranging from 8 mm to 19 mm made from chrome vanadium steel (cr-v), hardened and tempered for durability, the handle shall be t-shaped, providing maximum torque and grip and surface finish shall be nickel-chrome plated for corrosion resistance.preferably tapariya or eastman, deep socket set consist of sockets from 8 mm to 22 mm, made of chrome vanadium steel, fully hardened, tempered, and chrome-plated, the sockets shall have six-point or twelve-point configurations for high torque applications, suitable for use with ratchet handles and extension bars.preferably tapariya or eastman, combination plier 6" manufactured from high-grade alloy steel, with precision machined jaws, cutting edges induction-hardened for long life. handles shall be double-dipped with insulated grips for comfort and safety.preferably tapariya or eastman, combination plier 8" manufactured from high-grade alloy steel, with precision machined jaws, cutting edges induction-hardened for long life. handles shall be double-dipped with insulated grips for comfort and safety.preferably ta

Central Government/Public Sector

CTN :43783503

26 Feb, 2026 NA

Mumbai - Maharashtra

Tender For supply of skv welding tools equipment and accessories with pre heating by compressed air blower using 3-piece moulds for 52 kg & 60 kg welding portion with auto thimble as per sr.no.1 to 45 of list attached for specification.

Shank Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors