Latest sheet cutter spares Tenders | Government sheet cutter spares Tenders

Central Government/Public Sector

CTN :45054942

11 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl.no. 98322000. condemned and unserviceable guillotine shearing machine with motor, pulley, back gauge, blade, drive assembly, plate clamping assembly and without electrical panel. id no.314105050, u/c no.120124001.make: batliboi and co. vide udm scrap advice note no. 012282-25-01479 dt. 17.03.26. approximate total weight - 11500 kgs [mild steel-11410 kgs, cast iron -30 kgs, brass/bronze -20 kgs, copper-30 kg, wastage-10 kgs]. note: 1. rate per number should be quoted. 2. as is where is basis. 3. cutting and dismantling is permitted. 4. crane loading is permitted. 5. digging is not permitted 6.incoming cables to the motor terminal are not for sale. 6. custodian should cut the power supply during delivery if required. 7. the total weight and break up of the total weight is approximate. railway is not responsible for any shortage of weight. 8. the purchaser may visit the machine offered for condemnation and check the site conditions for delivery feasibility before quoting the offer 9. purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment, gas cutting equipment and necessary trained men. 10. the purchaser will be held responsible for any damage/fire accident caused to the railway property. 11. after completion of delivery purchaser has to keep the cutting and loading spot neat and clean. custodian: sse/mmw/goc

CTN :45045613

11 May, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply of c12m260020 - 1389910048 - flue gas bypass - obsg stack 206-hv-2801 , 1398051828 - complete guillotine valve in inlet duct , 1398051834 - complete guillotine valve in outlet duct , procurement supervision charges

CTN :45036193

05 May, 2026 NA

Delhi - Delhi

Tender For expression of interest document for supply and delivery of school requisites 2026 for secondary schools (design and technology) - supply and delivery of school requisites 2026 for secondary schools (design & technology) - angle grinder, band saw, bench drilling machine, bench grinder, circular saw, compressor, spraygun, drilling machine (portable), extension cable, hot wire cutter, jig saw (portable), metal lathe, planer / thicknesser, router (portable), sander -orbital, soldering iron, strip heater, welding machine, wood working lathe, abrafile frame, adjustable spanner, adjustable spanner, anvil, bench hook*, bench shear (guillotine), bradawl, carpenters mallet, centre punch, centre square, chisels- mortice, chisels- mortice, chisels -bevelled edge, chisels -bevelled edge, chisels -bevelled edge, chisels- firmer, chisels- firmer, chisels- firmer, cold chisels, combination drill, combination pliers, coping, saws, corner clamps, countersunk bit, dividers, engineers square, engineers vice, forstner bit, g cramps, g cramps, hacksaw, hammer: ballpein, hammer: ballpein, hammer: ballpein, hammer claw, hammer cross pein, hand drill, hand files including handles, hand files including handles, hand files including handles, hand saws, hand saws, inside calipers, jack plane, jenny calipers, junior hacksaw, machine vice, marking gauge, marking knife, measuring tape, metalwork bench, mitre box, mole grip, nail punch, needle files, oil can, oil stone, outside calipers, pincers, pipe wrench, rasps, ring spanner, riveting machine kit, router bits, sash cramps, saw set, screw driver, screw driver, scriber, sliding bevel, smoothing plane, spanner - open ended, spirit level, spoke shave, spoke shave, steel rule, taps and dies, tenon saws, tinmans snip, tinmans snip, try square, v-block and clamp, vernier calliper, wire brush, woodwork bench, woodworkers bench vice, blackboard compasses, blackboard protractor, blackboard rule, blackboard set squares, design tables, isometric-grid blackboard*, square-grid blackboard*, whiteboard compasses, abrafile blades, coping saw blades, emery cloth, emery cloth, emery cloth, goggles, hacksaw blades, junior hacksaw blades, masks - respiratory, masks - dust, paint brush*, paint brush*, paint brush*, welding apron, welding gloves, welding rods.

State Government

CTN :44752225

11 May, 2026 1.66 Crore

Umaria - Madhya Pradesh

Tender For corrigendum : procurement of various spares of dampers and guillotine gates installed at boiler of 1x500 mw unit, sgtps, mppgcl, birsinghpur. - procurement of various spares of dampers and guillotine gates installed at boiler of 1x500 mw unit at sgtps, mppgcl, birsinghpur

CTN :44926927

27 Apr, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply and delivery of school requisites 2026 - angle grinder-grinding wheel, diameter 110 mm , power range, 750w to 2000w, 240v + key (eu), band saw-table size 400 x 548, mm, 900 w or 340 x 335 mm, 350, w 240 v + blade and sense (eu), bench drilling machine-13mm, chuck, 240v, minimum table size, 260 x 180 mm + chuck key (eu), bench grinder-minimum 250 w,, 240v, circular saw-minimum 1.5kw,, 240 v + fence and cross-cut guide, (eu) (table mounted), compressor -output 50l/min, 6, bar, 340 w + supply hose and clips, (eu), spraygun-0.7 mm nozzle, diameter, 800 cl capacity (approx), (0.7 mm - 1.4 mm), drilling machine (portable)-, chuck diameter 3 - 16mm, 240 v +, chuck key, extension cable-20 metres, hot wire cutter-40 w, 240v, jig saw (portable)- power range, 300 600 w, 240v + allen, key(eu), metal lathe-1.5kw, distance, between centres 750 mm, including tool bit, boring bar,, knurling tools, parting tools, tail, stock, chuck key, centre drill, dead, centre, revolving centre, face, plate, 4-jaw and 3-jaw chucks., (eu), planer / thicknesser-maximum, planing width 310mm,maximum, thicknesser capacity 230, mm,power range 3kw to 4kw,, 240 v + fence(eu, router (portable)- power range, 1200w to 1800 w, 240v + key, (eu), sander orbital-power range 250, w to 300 w, 240v (eu), soldering iron-80 w, strip heater-140 w, 240v, welding machine-electric arc, 6kw, 150a, 240v (with protective, casing) incluing clamp, cables and, shield. (eu), wood working lathe-distance, between centres 1093 mm, 550, w, 500 - 2000 revolutions per, minute including face plate, dead, centre, revolving centre, turning, tools and tool rest., abrafile frame-4" deep/blade, length 6" (+ blade on frame), adjustable spanner-jaws open : 22, mm length: 200 mm, adjustable spanner-jaws open : 31, mm length: 300 mm, anvil-50kg, bench hook*-material: beech, size:250 mm x 150 mm, bench shear (guillotine)- up to 4, mm sheet and 10 mm rod, bradawl-minimum blade length, 32 mm, carpenters mallet-4.5 head width, centre punch-round head,, knurled body, 4" length, centre square-std size 75 mm, chisels- mortice-size: 6 mm, chisels- mortice-size: 9 mm, chisels -bevelled edge-size: 12, mm, chisels -bevelled edge-size: 19, mm, chisels -bevelled edge-size: 25, mm, chisels- firmer-size: 6 mm, chisels- firmer-size: 12 mm, chisels- firmer-size: 25 mm, cold chisels-type: flat, size:150 mm x 12 mm, combination drill-std drill set, combination pliers-size: 200 mm, coping saws-blade length: 150, mm, corner clamps-cramping capacity, 4" mild steel type, countersunk bit-head diameter:, 3/8" length: 2", dividers-length 6", engineers square-length 6", engineers vice-jaw width: 6", engineer's swivel base table (50, mm), forstner bit-bit set: sizes 10, 12,, 15, 16, 18, 20, 22, 25, 26, 28, 30,, 35, 40, 45 & 50 mm, gcramps-capacity: 6", gcramps-capacity: 12", hacksaw-non-adjustable 12", tubular frame wing nut tensioning, device for 12" blades, hammer: ballpein-0.5 lb, hammer: ballpein-0.75 lb, hammer: ballpein-1 lb, hammer claw-0.5 lb, hammer cross pein-0.75 lb, hand drill-chuck capacity 8 mm, hand files including handles-size:, 6", hand files including handles-size:, 8", hand files including handles-size:, 10", hand saws-22" long - cross cut, hand saws-22" long -rip, inside calipers-arm length 6", jack plane-14" long, jenny calipers-arm length 6", junior hacksaw-length blade 6", machine vice-maximumm jaws, opening 85mm, marking gauge-minimum length, 240mm, marking knife-length of body, 15cm, measuring tape-measuring length:, range 3m to 5 m, metalwork bench-size 2010 x 810, x 800mm, mitre box-mitre block 9" long, (plastic), mole grip-length 7, nail punch-set of 4 nail punches;, 1.5, 2.5, 3 & 5 mm, needle files-set of 6 - 14cm, oil can-2 pints capacity (1-2 pint), oil stone-150 mm length, outside calipers-arm length 6", pincers-length of body: 180 mm, pipe wrench-length: 300 mm, rasps-length size: 200 mm - 350, mm, ring spanner-set 6mm 25mm, riveting machine kit-sets rivets, up to 5 mm

State Government

CTN :44919543

13 May, 2026 1.53 Lacs

Multi City - Chhattisgarh

Tender For corrigendum : metallic expansion bellow for id fan guillotine gate air blower line

CTN :44768443

23 Apr, 2026 NA

Tiruvallur - Tamil Nadu

Tender For corrigendum : supply of c12m260020 - 1389910048 - flue gas bypass - obsg stack 206-hv-2801 , 1398051828 - complete guillotine valve in inlet duct , 1398051834 - complete guillotine valve in outlet duct , procurement supervision charges

Central Government/Public Sector

CTN :44878118

17 Apr, 2026 NA

Angul - Odisha

Tender For procurement of spares for esp e pass glandular spade guillotine gate forstg ii tstps kaniha. - drive screw, e-pass,fouress, drive screw, e-pass,fouress, gaiter,gsg/14552-01/00&06,fouress

Central Government And Public Sector

CTN :44841552

02 May, 2026 NA

Multi City - Multi State

Tender For one time repair along with camc for period of 02 years of double column guillotine shearing machine (capacity 16x3100mm).

Central Government/Public Sector

CTN :44728877

16 Apr, 2026 NA

Surat - Gujarat

Tender For upgradation of divertor, guillotine and forced dampers of hsrg-2/gt-2 of co-gen plant through oem, m/s bachmann india at ongc hazira plant on oem basis

Sheet Cutter Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector