Latest sheet pile Tenders | Government sheet pile Tenders

Central Government/Public Sector

CTN :40521439

19 Jun, 2025 NA

Bokaro - Jharkhand

Tender For supply of welding electrode, type-rutile, material - mild steel, dsgn: aws , electrode zedalloy, aws/sfa-5.13: e fe mn-b size- 4.00 mm x 450 mm , welding electrode, type-rutile, material - mild steel, dsgn: aws: e-6013, is: 814-2004 , welding electrode e-312-16 type: stainless steel welding electrode for shielded metal arc welding

CTN :40522831

18 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of surface dressing n exc 15 cm deepin hard oblique dense soil , excavating over areas not exceeding 1 point 5 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed , excavating over areas exceeding 1 point 5 m deep not exceeding 3 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed , excavating over areas exceeding 3 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed. , returning filling in including spreading and levelling and watering and well ramming in layers not exceeding 25 cm each , removing excavated material n exc 50m and depositing where directed at a level n exc 1 point 5 m above the starting point , m and l for hard core of gauge n exc 63 mm and deposeted and spread and levelled in layers n exc 15 cm thick and watered and rammed to a true surface complete all as specified and as directed , m and l cement concrete in fdn and 40 mm graded aggregate complete all as specified and as directed , m and l cement concrete 40 mm graded aggregate in sub base of flooring complete all as specified and as directed , m and l cement concrete 40 mm graded aggregate complete all as specified and as directed , m and l cement concrete 20 mm graded aggregate complete all as specified and as directed , m and l for rcc m30 reinforced cement concete design mix in foundation including rafts and footing and foundation beams and bases for column and etc basement slabs under reamed piles , m and l for mild steel tmt bar 10 mm dia and over cut to length and bent to shape required , m and l for mild steel tmt bar 8 mmn dia and overm cut to length and bent to shape required , m and l formwork to sides of rough finished flat surface of concrete foundations and footings and bases of colums and raft and raft beams and sides and sffits , m and l formwork to rough finished flat surface soffits of suspended slabs such as roof slabs and floor slabs and landing and similar work not exceeding 200mm thick horizontal or sloping all , m and l formwork to rough finished flat surface in sides and soffits of floor or roof beams and beam haunchings and girders and bressummers , formwork to faces of walls and retaining walls and butments and parapets and staircase railings and similar work including attached pillasters and buttresses , m and l formwork to edges of rough finished surfaces of concrete flats and trends and breaks in floors windows cills and concrete railing and openings in concrete walls and floor and roofs , m and l liquid water proofing compund , m and l for verified ceramic wall tiles light shade 10 mm thick square oblique rectangular polished and area of each tiles not exceeding zero point 36 sqm and in floors , m and l for verified ceramic non skid tiles light shade 10 mm thick square rectangular polished and area of each tiles not exceeding zero point 36 sqm , m and l for screed bed or bedding laver of mortar 15 mm thick for laying floor finished complete all as specified and as directed , m and l rendering 15 mm thick on wall on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l rendering 10 mm thick on ceiling on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l rendering 10 mm thick in on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed , m and l for preparation of wall surfaces including priming coat and wall care putty and applying two coats of distemper oil emulsion , m and l for preparing new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and as directed , s and f anodised aluminium window and ventilator shutters and side hung type without sash bars and al

CTN :40522894

18 Jun, 2025 NA

Delhi - Delhi

Tender For supply of business projector with colour or white , projector screen , digitally podium mdf board, mild steel and optional colour , biometric system , mobilize jammer

CTN :40556973

16 Jun, 2025 NA

Akbarpur - Uttar Pradesh

Tender For providing of facility management services - lumpsum based - college; mild steel and iron works; consumables to be provided by service provider (inclusive in contract cost)

State Government

CTN :40557200

14 Jun, 2025 NA

Amravati - Maharashtra

Tender For supply of cmt crt flooring 40 mm thick , providing and fixing in position tmt fe 500 bar reinforcmt , providing second class burnt brick masonry , providing internal cmt plaster 12mm thick in single coat , providing internal cmt plaster 20mm thick in single coats in cmt mortar , providing sand faced plaster externally in cmt mortar , providing and applying water proofing treatment , providing and fixing on walls ceiling floor 15 mm dia , providing and fixing on walls ceiling floor 25 mm dia. , providing and fixing on walls ceiling floor 40 mm dia. , providing and fixing p.v.c. rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm , providing and fixing p.v.c. rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm , providing and fixing 100 mm dia stabiliser pipe p.v.c. soil ventwaste pipe , providing and constructing brick masonry inspection chamber , providing and fixing mild steel grill wrk for windows, ventilators , providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm , supply and fixing of rock stone finished full body , providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness , providing and laying antiskid ceramic tiles of approved quality of size 30 cm x 30 cm , providing and laying ceramic tiles of having size 30 cm. x 30 cm. , providing and laying telephone black amba white cadburybrown ruby red ocean brown granite stone of 18 to 20 mm thick , providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm , providing and fixing tbl top white wash basin of size 120x635x405mm rubber plugs and brass chain , providing and fixing white european type wallhung pan , providing c.p. handshower health faucet 1 m pvc tube with wall hock jaquar make , providing c.p. toilet paper holder jaquar make continental , providing c.p. soap dish hooker jaquar make continental , providing and fixing divertor with overhead shower , providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories , providing and fixing 3.5 to 4 mm thick veneer finish wall panaling made out of 50 x 25 mm , providing and fixing rollar blinds ami make or approved make and shade , providing and fixing false ceiling with ecofriendly lightweight calcium silicate tiles , scrapping the old plastered internal surface with sand paper and coating. , providing and applying two coats of wall care putty on plastered surface , providing and applying plastic emulsion paint of approved quality, colour and shade , providing and applying two coats of exterior weather shield paint , providing and fabricating structural steel wrk in rolled sections like joists, channels, angles, tees , providing and fixing colour coated zinkalume r az150 , providing and applying two coats of flat oil paint , providing and fixing in position aluminum sliding vindov of 3 tr , providing and fixing solid core flush door shutter , providing and fixing single or double leaf panelled door shutter , providing and fixing in position powder coated aluminium louvered windows , providing and fixing overall 26height and 22depth,supported on aluminum pips ,troly basket made out of 5 mm ss rod ss kichen troly , providing and fixing of main tbl at 3600lx1400dx750ht made up of 18plus18mm thick mdf top with pvc membrane , providing and fixing single lair or birth of size 2025lx1000dx650h with cushn and bolster. , providing and fixing lair or birth side tbl of size 400lx 400dx 415h the lair or birth side unit is made up of 18mm thick prelam particle board with both side decorative lamina , providing and fixing dressing tbl of bid details/ 2 / 52 size 400lx 400dx 1800h. , providing and fixing wardrobe with mirror of size 900lx 600dx 1965h the wardrobe side panels and doors are made up of 18mm thick prelam particle board with both side decorative laminate. , providing and fixing cauche

CTN :40557900

02 Jun, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of tent extendable frame supported with mild steel joints and flooring tpo (q3)

CTN :40540330

20 Jun, 2025 NA

Chamoli - Uttarakhand

Tender For supply of op track stores - complete supply of mild steel metal double beam crash barrier for op track as per ts , convex mirror 60 cm dia alongwith 75mm dia ms pole up to 3 mtr high with complete fittings as per ts , dwc pipe confirming of is 16205 as per tech sanction , complete plant spares for op track as per tech sanction , misc stores as per tech sanction

CTN :40540442

20 Jun, 2025 NA

Patna - Bihar

Tender For supply of mild steel material - mild steel u channel 75 x 40 x 6000mm , mild steel flat 12 x 75 x 6000mm , mild steel flat 12 x 40 x 6000mm , mild steel square 12 x 12 x 6000mm , mild steel square 50 x 50 x 6000mm , mild steel square 63 x 63 x 6000mm , mild steel dia 36 x 6000mm , mild steel dia 50 x 6000mm , mild steel dia 30 x 6000mm , mild steel dia 40 x 6000mm , mild steel dia 26 x 6000mm

CTN :40540705

27 Jun, 2025 NA

Pune - Maharashtra

Tender For supply of laboratory equipments and standards as per spec. no. hemrl/qard/spec/2025/lab equipments & standards - acid storage cabinet with exhaust system, capacity: 100-120 liter, qty: 01 no a. construction of cabinet should be minimum 8mm polypropylene panels, which can give protection against harsh acids, alkali and corrosion. b. there should have adjustable and reversible shelves and can be customized. c. the storage should be divided into two parts to store different acids. d. front door of the cabinet shall be in twin door design having glass panel. e. door hasp should accept padlock to achieve double locks and also have safety lock system. f. there should have circulating fans with air vents. , acid storage cabinet with exhaust system, capacity: 220-250 liter, qty: 01 no a. construction of cabinet should be minimum 8mm polypropylene panels, which can give protection against harsh acids, alkali and corrosion. b. there should have adjustable and reversible shelves and can be customized. c. the storage should be divided into two parts to store different acids. d. front door of the cabinet shall be in twin door design having glass panel. e. door hasp should accept padlock to achieve double locks and also have safety lock system. f. there should have circulating fans with air vents. , sample storage cabinet, capacity: 220-250 liter, qty: 02 nos. a. the laboratory sample storage cabinet should be made of pure stainless steel. b. there should have adjustable shelves and can be customized. c. should have double lock system. d. front door of the cabinet shall be in twin door design having glass panel. ?. should be workable within temperature range of 10-50c and humidity of 20-80%. f. door handles shall make of ss 304., glass membrane filtration assembly with three manifold system and vacuum pump & other accessories, qty: 02nos. vacuum filtration assemblies made of borosilicate glass that should be compatible with most organic solvents for solvent filtration purpose. b. funnel, receiver flask & filter support base should be made of borosilicate glass the filter support base design should have an integral vacuum connection located above the filtrate dip such that it can prevent contamination of the vacuum line from droplets. d. it should be three place manifold glass filtration assembly. glass funnel capacity: 300ml f. filter support base with sintered glass filter: 47mm. g glass receiver flask: i) 500ml-01 no, ii) 1000ml-01 no iii) 2000ml-01 no. h. aluminium clamp: 47mm i. effective filtration area: 9.6cm the filtration base should have a silicon stopper. k. all accessories should come with assembly. vacuum pump: , vacuum pumps are to be equipped with vacuum regulator to adjust vacuum. b. vacuum pump should have thermal protection device to shut off the pump automatically when overheated and resume working when temperature cools down. c. max. vacuum (mbar): 100 d. max flow rate (l/min): 17 e. motor rotation (rpm): 1450 , digital rotary shaker, qty: 02 nos. the rotary shakers comprises of shaking platform, speed regulator and timer to adjust duration of orbital motion. b. shaking platform should be made of ss 304 to avoid any kind of rust formation. clamps should be made of either unbreakable plastic or stainless steel d. the housing should be made with thick sheet of mild steel duly powder coated. motion: rotary motion f shaking mechanism: brushless motor used for shaking b digital lcd display with rpm controller provided in the panel. h over temperature alarm. speed (rpm): 20-200 accuracy: 1c k. volume capacity: should be of different sizes like as 16 x 250ml and 16 x 500ml. l platform dimension (inches): 18 x18 m. temperature control: electronic/automatic ceramic hotplate magnetic stirrer, qty: 06 nos. a. digital lcd display with back light. b. big size ceramic hot plate with flame protection and durability. e. heating and stirring can proceed simultaneously. d. temperature & stirring speed is stepless adjusted.

Central Government/Public Sector

CTN :40541190

20 Jun, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of 5ml borosilicate glass laboratory beaker - 5ml borosilicate glass laboratory beaker , 10ml borosilicate glass laboratory beaker , 25ml borosilicate glass laboratory beaker , 50ml borosilicate glass laboratory beaker , 100ml borosilicate glass laboratory beaker , 500ml borosilicate glass laboratory beaker , 1000ml borosilicate glass laboratory beaker , funnel , borosilicate graduated cylinder , mild steel tongs , 123mm scissors , 190mm scissors , spatula overall length 30 35 mm , spatula overall length 90 100 mm , spatula overall length 180 200 mm , flat optic tweezers plastic , flat optic tweezers stainless stell , nitrile hand gloves of large size pack of 50 pairs , ldpe pouches

Sheet Pile Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector