Latest sheet piles Tenders | Government sheet piles Tenders

State Government

CTN :43467490

16 Jan, 2026 NA

Delhi - Delhi

Tender For corrigendum : s/i/t/c of e/m equipments and allied works for newly re-bored tube well at okhla vihar near majar in okhla constituency ac-54. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 15 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point: 200-125-75 lpm on 89-124-133 mtr. head.having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved. , supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted. a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no. b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 no c) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no. e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable banking g) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos.complete wiring &installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated and pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs. make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., supply of ms nut bolts off size as per requirement., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 1x1 made out from 6mm thick m.s. sheet in 2 halves and a circular hole in centre 3-1/2 dia. with locking arrangement by nuts and bolt. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

Central Government/Public Sector

CTN :43532012

13 Jan, 2026 NA

Kolkata - West Bengal

Tender For corrigendum : supply of one coach set of partition frames and body shell items for medha mrm2/mc(983),mrm2/tc (984) and mrm2/tc2 (985) coaches to drg.no: 1.98310009 col-1, alt 'd' - 1 no 2.98310010 col-1, alt 'nil' - 3 nos 3.98210049 col-1, alt 'a' - 2 nos 4.98210048 col-1, alt 'nil' - 2 nos5.98410002 col-1, alt 'b' - 1 no special condition : the chair pillars shall be packed in the container as per icf/j&t/sk-1865-alt 'a'. other partition frames not fitting in the container shall be stacked one over the other, secured using packing strip and placed in steel pallet. the height of each stack shall not exceed 750mm for easy handling. suitable and suffcient packing strips to be used such that stacked items do not disintegrate during transit, storage and handling. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43534716

13 Jan, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply and installation of one coach set of body shell items and partition frame for lwcbac/pp2 (830) to drawing nos: 1. 83010002 alt 'nil' - 1 no 2. 83010003 alt 'a' - 1 no 3. 58110017 alt 'c' - 2 nos 4. aaa10488 alt 'c' - 4 nos 5. aab10338 alt 'nil' -12 nos 6 .aai10516 alt 'nil' - 8 nos 7. ssa10018 alt 'nil' - 2 nos 8. aag10476 alt 'nil' - 2 nos 9. aaa10963 alt 'nil' -1 no 10.aaa10967 alt 'nil' - 1 no items to be supplied as set. special condition : installation required as per assembly drawing and annexure-a, dtd 13-09-2023 to be followed. the chair pillars shall be packed in the container as per icf j&t sk 1865 alt a. partition frames not fitting in thecontainer shall be stacked one over the other, secured using packing strip and placed in steel pallet. the height of each stack shall not exceed 750mm for easy handling. suitable and sufficient packing strips to be used such that stacked items do not disintegrate during transit, storage and handling.[safety item ]

State Government

CTN :43480724

19 Jan, 2026 63.00 Lacs

Ranchi - Jharkhand

Tender For supply of adp and o&m materials - electrical items :, buckle for strap, insulation piercing connector for db charging, insulation piercing connector branching suitable for t joints, spring loaded distribution bus bar insulated box for fixing on pole suitable for ab xlpe cable and three phase connection 1 incoming and out going 3 phase connection as per field requirement, suitable lugs, suspension clamp assembly suitable upto 70-95 sqmm bare messenger (including 1 no. suspension clamp with bracket, 2 mtr stainless steel strap & 2 nos. ss buckles), dead end clamp suitable above 70 sqmm bare messenger (including 1 no. dead end bracket + 1 no. dead end + 2 mtr ss strap + 2 nos. ss buckle) [minimum breaking load-15 kn], lt pre insulated mid span joint suitable 50 mm2 phases, lt pre insulated mid span joint suitable 95 mm2 phases, suspension clamp assembly suitable above 95 sqmm bare messenger (including 1 no. suspension clamp with bracket, 2 mtr stainless steel strap & 2 nos. ss buckles), lt ab cable accessory, 1.1mtr. stainless steel strap if207(20x0.7), service main anchor clamp for proper support of service cable

State Government

CTN :43539595

21 Jan, 2026 NA

Kannur - Kerala

Tender For disposal of old and unserviceable scrap items under various substations vacccum cleaner damaged , annunciator faulty , static relay faulty , mechanical relay faulty , 66kv 10mvar reactor faulty , rubber tyre scrap , prv damaged , tube light damaged , la counter , 11kv cable end , electrical kiosk and panel scrap 85kg , oil barrel empty damaged , fire wood , brush cutter engine (scrap) , disc insulator (unserviceable) , ups damaged , battery charger 110v,20a scrap (@ptru) , ac (asbetose)sheet (dismantled) , 11kv vcb bottle , 11 kv xlpe 3*300mm2 ug cable (3 pieces) , 11kv cable, 1 500 sq mm , 80mm buchholz relay with gasket (faulty) , rusted earth wire , mettalic 33kv cable drum (old scrap) , empty oil barrel (damaged) , battery charger, 110v, 15a , iron scrap , 11kv xlpe cable 3x300mm2 , 11kv xlpe lug cable 10x 500mm2 , 9mtr psc pole damaged , spring charge motor for alind make outdoor vcb faulty , disc insulator 90kn , acsr scrap , lt control panel , window frame (iron scrap) , 11kv insulator , 3x 300 mm2 11kv xlpe cable bits , vacuum interrupter for 11kv 630a dismantled (11kv vcb bottle) , copper scrap , aluminium scrap (acsr conductor) , control cable aluminium scrap , control cable copper scrap , 11kv 3x300 sqmm xlpe cable , space heater(13no=2.47kg) , 3ph 4 wire energy meter-/5a secure permier 300 faulty , 11kv ab switch faulty , cr panel for 33kv side of 110/33 kv transformer (iron scrap) (1no=230kg) , gi strip 50x6 mm (various small lengths) , acsr scrap , 11kv xlpe 1x500 sqmm outdoor termination kit (faulty) , iron scrap , mechanism box for isolator assembly (25kg iron scrap) , mechanism box for earth switch(35kg iron scrap) , 11kv xlpe 1x500 sqmm damaged , 11 kv vaccum bottle (scrap) , gi earth wire bits dismantled , empty oil barrel , 11kv disc insulator 45kn (old and used) , flurescent tube choke , sodiunm vapour lamp fitting (faulty) , aluminum clamp scrap , alumiunm conductor scrap , copper scrap , empty oil barrel , insulator stack for 110kv isolator(27 insulators) , copper control cable cut bits , helmet(unusable)(plastic-4.5kg) , relay (used & unserviceble) , earth discharge rod(used) , volt meter(faulty) , aluminium control cable cut bits , s/s hardware fitting for aaac(22nos/24.12 kg) , vibration damper for aaac(45 nos/103.5 kg) , s/t hardware fitting for aaac(24 nos/16.8 kg) , steel tail clamp 7/3.15mm for earth wire(16 nos/1.8 kg) , gi lug for earth wire 7/3 mm(324 nos/85.5 kg0 , 25mm ms rod scrap , gi strip 50x60mm , 3cx 300 mm2 ug cable armoured- scrap cut pieces , alluminum alloy scrap , breather faulty scrap , disc insulator 70kn , s/s hardware fitting w/o arcing hon for tiger conductor , s/t hardware fitting w/o arcing horn for tiger conductor , damaged disc insulator

Central Government/Public Sector

CTN :43519373

09 Jan, 2026 NA

Bengaluru - Karnataka

Tender For empanelment of suppliers for supply of issue department store items, bengaluru - 2" 11/12 guage wire nails, steel strapping 5"/8", jute twine, signode seals for steel strapping 5"8", cloth mask- surgical (two layered), surgical (three layered), n 95 masks, 3 m masks, banding rolls for cvps machines, polythene covers 4"x 6", polythene covers 6"x 8", rubber bands 1", cutter, transparent trays, hammer, nail puller, transparent pouches, screw driver, serrated knifes, surgical hand gloves, hand sanitizers-, 100 ml, 250 ml with pump, 500 ml with pump, hand pressure/ steel strap sealer, strapping machine, plastic cable ties (12" long), jute gunny bags (size 17"x15"), cleaning materials:, dettol (100 ml), phenyl (5 ltr), banian cloth, cotton waste, collin (glass cleaner 250 ml), match box, candles big size, hair nets (hair caps), safety goggles, safety hand gloves, hard tipped boots, duracell batteries, 9v, aaa, aa, band aids

Central Government/Public Sector

CTN :43535192

19 Jan, 2026 NA

Bhusawal - Maharashtra

Tender For supply of set of stainless steel pipe fittings for 3 phase locomotives as per clwspecification no. clw/ms/3/053 alt-21 consists of (1) reducing bush (s.s) 1.1/2" bspt (m) x 1.1/4" bspt (f) = 2 nos. (2) reducing bush (s.s) 1.1/2" bspt (m) x 1" bspt (f) = 1 nos. and (3) reducing bush (s.s) 1" bspt (m) x 3/4" bspt (f) = 2 nos. one set consists of 3 items 5 nos. (item reserved forclw approved sources only). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43532316

23 Jan, 2026 NA

Mumbai - Maharashtra

Tender For supply of hand held punches(font size 12 mm) of high quality heat treated tool steel as per description of is: 6864/1984.hand held punches (a) alphabets a to z(size-12 mm) (b) numbers 0 to 8(size-12 mm) dimension:16x16x90mm hardness of letter end: 56-62 hrc hardness of striking end :38- 46 hrc make of items : bradma, bosch, precision [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43543754

22 Jan, 2026 NA

Harnaut - Bihar

Tender For supply of set of hardware items for fixing of bio-toilet in lhb coaches. 1) stainless steel hex head screw m12x45 (a2-70) confirming to specification no. is:1364-92, part-2, is:1367-84, part-14 and to rdso drawing no. cg-18100, item-7, alt.-nil, qty.-1no./set. 2) stainless steel hex nut m12 (a2-70) confirming to specification no. is:1364-92, part-3, is:1367-84, part-14 and to rdso drawing no. cg-18100, item-9, alt.-nil, qty.-2 nos./set. 3) spring washer b12 confirming to specification no. is:3063-1994, aisi-304 and to rdso drawing no. cg-18100, item-6, alt.-nil, qty.-2nos./set.make/brand:unbrako/tvs/tuff/dlf only

Central Government/Public Sector

CTN :43532579

15 Jan, 2026 NA

Ajmer - Rajasthan

Tender For supply of maintenance kit 03 for earthing equipments per set consist of 6 items to rcf drg. no. (1) stainless steel bush to drg. no. lw71235 alt-a qty/set 02 nos. (2) brush holder to drg. no. lw71238 alt-nil, qty/set 01 nos. (3) carbon brush assembly to drg. no. lw71239 alt-nil qty/set 02 nos. (4) clip assly. to drg. no. lw71240 alt.-a, qty./set 2 nos. (5) isolating bush to drg. no. lw71244 alt-a. qty./set 2 nos. (6) bracket to drg. no. lw71247 alt-nil qty/set 1 no. matl.&spec. as per drg.confirming to edts-101 rev-c, amndt.3, corr. 9 anex-1 [ warranty period: 30 months after the date of delivery ]

Sheet Piles Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors