Latest ship loader sale Tenders | Government ship loader sale Tenders

Central Government/Public Sector

CTN :40503496

14 Jul, 2025 NA

Kanakapura - Karnataka

Tender For supply of ferritic steel sheet 5x1250 x 3000 mm., as per drawing: rdso spec no.c-k201, gr ade x2crni12 (409m) table 1&2. heat treatment condition 2d as per table-5., packing instruc tion: stainless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic st eel) coils. the coil shall be protected in reasonably good condition to withstand nor mal handling hazard during transit with the following provision as the barest minimu m: i) coil should be wrapped with a layer of water proof paper through out whole leng th. ii) coil should be wrapped with a layer of biodegradeable sheet. iii) outer & inner of coil should be wrapped with gi sheet. iv) side of the coil should be covered with card b oard sheet. v) after this whole coil should be wrapped with biodegradeable plastic sh eet of suitable thickness. vi) the inner edge of the coil should be protected by gi ring f ollowed by another iron ring. vii) outer edge of the coil should be wrapped with gi rin g. viii) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. ix) whole coil shoul d be mounted on wooden blocks for easy lifting/stacking. x) the sheets in coil form fo r thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 100 0-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2 mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 tonnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) the sheet s/plates shall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate s hall be seprated with a layer of water proof paper, after this the whole bundle shoul d be wrapped with double layer of water proof paper and a biodegradeable plastic she et of suitable thickness. a metal protection in edges should also be provided. ii) all bu ndles shall have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling. mechanical damange & corrosion during transit if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40500333

06 Jun, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of heavy duty manually operated hydraulic scissor lift table. specifications: capacit y-1 ton, lift height-900mm or more, minimum height-350mm, platform size -1000 mm x 510 mm x 60 m m, foot pedal operated hydraulic lifting, lowering valve for precise lowering, wheels (04 nos) for easy mo veability. [ warranty period: 24 months after the date of delivery ]

State Government

CTN :40227801

10 Jun, 2025 49.58 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : various routine/preventive and breakdown maintenance work on as and when require basis at chp-gtps - replacement of hammer rings for stage ii crusher , replacement of hammer rings for stage i crusher , replacement of screen plate / breaker plate/kick off plate of stage i and ii crushers , replacement of rotor of stage i crusher with disassembling of removed rotor and assembling of new/repaired rotor , replacement of drive end side bearing / pedestal of crusher rotor or complete gear coupling set of crusher or repositioning of dislocated rotor of crusher , replacement of non drive end side bearing/pedestal of crusher rotor or complete alignment of crusher motor with crusher rotor , replacement of broken hammer rings of stage i and ii crushers (stage i crusher up to 12 nos.of hammer rings and stage ii crusher up to 06 nos. of hammer rings at a time) , replacement of rail of rail table of wagon tipplers 1/2/3/4 (in one side full length) , replacement of clamping rubber pads of clamp for wagon of wagon tipplers , replacement of whole resting pads for wagon of side beam of wagon tipplers , replacement of spill plate roller of wagon tipplers , repairing/preparation/ fitting and replacement of hooks/rods/turn buckle, chain, sling rope ,spring assembly etc. of vibrating trays and crusher house trays , spillage control at various locations , miscellaneous cutting/welding work require at various locations , replacement of gearbox in conveyor no. 2a/b,11a/b,12a/b,13,14/15,16a/b,17a/b ,18a/b,drc/apron/rg/,wagon tipplers,stacker-reclaimer , replacement of gearbox in conveyor no.,5a/b,8a/b,10a/b,shuttle conveyor 1/2,belt feeder 1/2 ,roller screen, mrc 3/4/5,wobbler feeder ,dribble conveyor 1/2 , replacement of slow speed coupling set (two halves) of drive pulley , replacement of coupling bolts and rubber bushes of slow/high speed coupling(input/output coupling ) in conveyor no.2a/b,11a/b,12a/b,13,14/15,16a/b,17 a/b,18a/b,drc/apron/rg/,wagon tipplers,stacker-reclaimer , replacement of coupling bolts and rubber bushes of slow/high speed coupling(input/output coupling ) in conveyor no.,5a/b,8a/b,10a/b,shuttle conveyor 1/2,belt feeder 1/2 ,roller screen, mrc 3/4/5,wobbler feeder ,dribble conveyor 1/2 , replacement/removing/refitting of various size and type of fluid coupling , replacement or removing & refitting of any internal/bearing/input/ output oil seal of various size and type of gear box , overhauling of dismantles old/used gearbox in all respect with fitment of input and output coupling. , replacement of drive pulley , replacement of drive end side bearing of drive pulley or repositioning of dislocated drive pulley , replacement of non drive end side bearing/any side pedestal of conveyor drive/non drive pulley , alignment of motor/ gearbox/drive pulley including decouple/couple of coupling , nut bolt and drive system checking with replacement of broken nut bolt in all 04 wagon tipplers no.1/2/3/4 as per scope , lifting and releasing of gravity take up of any conveyor belt for locking and de locking of belts for other than belt replacement work , loosening and tightening of horizontal type screw take assembly of any conveyor belts for other than belt replacement work , work of dismantling and re erection of new/repaired apron pan from existing apron feeder of wagon tippler , repairing of upper/lower structure/cone plates of damaged/bend apron pan , replacement of carrying roller of apron feeder , replacement of worn out/ damaged ti roller and garland rollers. , replacement of worn out/ damaged impact rollers , replacement of worn out/ damaged return rollers , replacement of various worn out/ damaged ti roller stands , replacement of various worn out/ damaged impact roller stands , replacements of various worn out/ damaged return roller stands , replacement of various worn out skirt rubbers [10 m each] and skirt rubber with angle , preparation and replacement of guide rollers with bracket in place of worn out/ damaged gu

CTN :40024561

03 Jun, 2025 1.20 Lacs

Multi City - Telangana

Tender For corrigendum : procurement of hydraulic lifting table (gear box jacks) on specific make for area workshop, rg-i area

State Government

CTN :40435240

29 May, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230a15 volts a/c), stirring capacity: 50-1500 rpm, capacity of stirrer: 2 litre, plate size: 18.4x18.4 cm(approx.), make & model: branded, bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is stan

Central Government/Public Sector

CTN :40419836

28 May, 2025 NA

Vadodara - Gujarat

Tender For supply of single scissor lifting platform table size of platform 1500mm x 900mm x 70mm thick capacity- 11 ton mounted on turn table with swivel type heavy duty handle & 4 nos. rubber wheel size: (10'' dia x 2''), closed height of table 600 to 650 mm, maximum height after lift 1150 to 1200mm. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40409944

30 May, 2025 NA

Nagpur - Maharashtra

Tender For supply of cbc lifting hydraulic lifting table capacity 700 kgs technical specification as per a nnexure-a attached [ warranty period: 24 months after the date of delivery ]

corporations/Associations/Others

CTN :40401307

02 Jun, 2025 NA

Bengaluru - Karnataka

Tender For auction sale of chair, table etc,speaker, dvd player, tv etc,bldc pedestal fan, drill machine etc,10 kva gen set etc,tong s/s, tea thermos etc,old battery etc,disc weight lifting, kma 585 lh etc

corporations/Associations/Others

CTN :40401308

02 Jun, 2025 NA

Bengaluru - Karnataka

Tender For auction sale of chair, table etc,speaker, dvd player, tv etc,bldc pedestal fan, drill machine etc,10 kva gen set etc,tong s/s, tea thermos etc,old battery etc,disc weight lifting, kma 585 lh etc

Central Government And Public Sector

CTN :40366371

05 Jun, 2025 NA

Katihar - Bihar

Tender For supply of hydraulic lifting table of capacity 2000 kg, maximum lifting height from ground 12 50 mm to 1500 mm. overall size 1800 mm x 1100 mm (length x width), powerpack 2hp/415v ac, both man ually and electrically can be operated. make- rajgauri engineering. [ warranty period: 30 months after th e date of delivery ]

Ship Loader Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors