Latest shoe rack Tenders | Government shoe rack Tenders

Central Government/Public Sector

CTN :40511262

17 Jun, 2025 15.50 Lacs

Chittorgarh - Rajasthan

Tender For supply of revolving chair (v4) (q2) , desk and bench set for classroom/training area (q2) , cafeteria chair (q2) , almirah , book shelves , stainless steel dining table , bed , wooden four seater dinning table with cushion chairs , dining table chairs , dressing table , shoe rack

State Government

CTN :40501962

04 Jun, 2025 1.14 Lacs

Srinagar - Jammu And Kashmir

Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc

CTN :40492151

18 Jun, 2025 NA

Baramulla - Jammu And Kashmir

Tender For supply of cgi sheets , fiber sheet , teak wood , mat , foam , white board , notice board , foot mat , dustbin , curtain , bucket , locker , water dipenser , shoe rack , chair , table wood , table plastic , table lamp , chair plastic , computer chair , kango set , base drum , sintex , borosil glass , school bench and desk , ags metal sheet board , colour printer , wall clock , calling bell , paint black , paint white , paint red , paint og , cartridge bid number/ & ( * ) : gem/2025/b/6160872 dated/ + : 26-05-2025 bid document/ 2 2 1 / 28

CTN :40507956

18 Jun, 2025 NA

Gurdaspur - Punjab

Tender For supply of field study chair , iron study table with wooden top , iron folding executive chair two seater , iron shoe rack , iron peg table with wooden top , iron wash basin with mirror , iron center table with wooden top

State Government

CTN :40478460

10 Jun, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of visitor chair cushioned , plastic chair heavy , almirah wooden 6x3 , almirah wooden hydrolic on top large size 7x4 , garden table mesh with glass , garden chairs mesh , dinning chair wooden , dinning table wooden 10x4 , wooden bed room chairs , double bed box type 6x6 with cushioning on headrest and footrest , bed side table wooden , wooden shoe rack cabinet , centre table 2x4 with glass top , double bed box type 6.5x6 , double bed box type 6.5x6.5 , sofa 5 seater , bed side table , centre table 4x2.5 with drawers good glass on wooden top , centre table 2x4 wooden sliding , dressing wooden almirah , dinning table wooden , dinning chairs wooden , centre table wooden made of teak wood carving desigb 2x4 glass top

CTN :40268881

29 May, 2025 NA

Khorda - Odisha

Tender For bid to ras supply of metal beds (v3),steel shelving cabinets (adjustable type) confirming to is 3312 (v3),cafeteria chair,steel bookcases confirming to is 7761 (v2),waiting area / airport terminal / public place / reception area chair or seat (v2),executive table (v3),wooden shoe rack,modular work stations (v2),modular table / meeting table / centre table (v2),office chair (v3),stainless steel dining table with fixed chair,foot step for hospitals

CTN :40471566

03 Jun, 2025 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of stainless steel shoe rack (q3)

CTN :40471998

04 Jun, 2025 NA

Begusarai - Bihar

Tender For supply of wooden shoe rack (q3)

State Government

CTN :40091313

28 May, 2025 NA

Kargil - Jammu And Kashmir

Tender For bid to ras supply of furniture and furnishing of vip guest house bodhkharboo - double bed , foam mattress , quilts double , bedsheet double , pillow cover , curtain with all accessories , sofa 7 seater , side table , bed side table with chair , washing machine , refrigerator , samrt tv , shoe rack , flower vassel , chimney , sofa 5 seater , dressing table , ladder , dinning table , patio outdoor seating , carpet , matting , kaleen , gas stove , dinner set , bathroom items , inverter with battery , wooden chair , door mat , mixer grinder machine , oven toaster grill machine , table lamp , study table , vacuum cleaner , hot and cold ac , dustbin , heater , heating panel , wooden photo frame , tv table , shoe shine machine , water purifier , induction , dustbin 5ltr , dustbin 19l , pillow , kitchen items

Central Government/Public Sector

CTN :40434732

14 Jun, 2025 40.00 Lacs

Kishangarh - Rajasthan

Tender For supply of lab furniture of central instrumentation facility, central university of rajasthan - wall mount cabinets with metal door, sefa-8 standards heavy duty wall mount cabinets: sefa-8 standards heavy duty cabinet body shall be in 1.2mm thick material of construction: 1.2 mm gi sheet with ss 304 hinges and handles. epoxy powder coating of 60 -80 microns. - size - 600mmlx450mmdx750mmh. provison of lock is required. these units will be fitted in the service areas of the drawing., under bench storage units (qty as per drawing)sefa-8 standards heavy duty under cabinets & drawers: sefa-8 standards heavy duty under module (cabinet body shall be in 1.2mm thick and drawer front & shutter shall be in 1 mm thick), the cabinet should have adjustable height shelf. the storage cabinets should be made of crca 20 gauge. (tata/ jindal/sail/jsw in panel construction. cabinets should have sandwitched doors & drawers filled with pcapsal sheet should be lined on the edges of doors and drawers for sound deadning. the cabinets should be interconnected with spacer which strengthens over all structure of the table / bench. ss fasteners should be used at exposed area inside the cabinets.. the drawer glides should be telescopic glides which gives strength with smooth movebase cabinet of 600 mm with 1 drawer & 2 shutter with lockbase cabinet 750mm with 1 drawer & 2 shutter with lockbase cabinet 900w 1 drawer & 1 shutter with lockbase cabinet 450mm 1 drawer & 1 shutter with lock, modular sink unit ( corner unit )specification of material of construction is same as under cabinets. the front panel should have single door with handle. sink bowl and bottle trap should be of polypropylene. one way ss faucet., filler panels (qty as per drawing)specification of material of construction is same as under cabinets., frame assembly for wall cabinet bench (qty as per drawing)material:steel tubing, of hollow sections conforming to standards is code:square pipe with a cross-section of 30mm x 30mm and a minimum thickness of 1.2 to1,6 mm. finish: powder coating: highly corrosion-resistant epoxy powder coating, typically 60-80 microns thick,, with pre-treatment for better adhesion. .legs:adjustable levelling feet: required for uneven flooring, typically with a tolerance of -5mm to +20mm., 17mm (+/-1) thick black granite (qty as per drawing), garment locker1000mmlx450mmdx2100mmh, made of ss 304, thickness of sheet is 1.2 mm and finish is matt. total 9nos. of lockers of equal size is required with provision of lock., shoe rack 1200mmlx300mmdx600mmh - two tier ss 304 shoe rack. made of 30mmx30mmx1.2mm pipe., hardware fittingsa) hinges :- hettich/haffele/godrej.b) handle :- ss304 matt finish d handle / aluminium flush handle.c) screw :- all s.s. 304 visible screws.d) lock :- hafele / hettich / godrej make with pair of keys. e) drawer channel :- hettich / ebco / haffele make telescopic drawer slides 45kgs

Shoe Rack Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

Central Government/Public Sector