Latest shuttering Tenders | Government shuttering Tenders

CTN :39423265

03 Mar, 2025 36.32 Lacs

Dhanbad - Jharkhand

Tender For filling of available materials and sealing of incline mouth at 30 no incline under badjna colliery, mugma area. - based on analysis, filling with available materials lead - 1 km, providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources), centering and shuttering including strutting, propping etc. and removal of form forwalls any thickness) including attached pilasters, butteresses, plinth and string courses etc., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars of grade fe-500d or more., total impact of gst for the purpose of ctc

CTN :39433272

04 Mar, 2025 6.26 Lacs

Thiruvananthapuram - Kerala

Tender For mla sdf 2023 24 construction of shutter system at thoppilkadavu near to thoppilkadavu iron bridge at nemom lac

State Government

CTN :39436139

04 Mar, 2025 NA

Jammu - Jammu And Kashmir

Tender For repairs to damaged angle iron racks and shutter of machinery shed in the divisional store of quality control and procurement division jammu

CTN :39406588

05 Mar, 2025 17.90 Lacs

South Tripura - Tripura

Tender For post flood maintenance and restoration work in 4 (four) nos. school under amarpur block, gomati district during the year 2024-25/2nd call - dismantling gs sheet roofing including ridges, hips, valleys, gutters wind ties etc. includingdismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the engineer- in-charge., demolishing cement concrete manually / bymechanical means including disposal of materialwith all lifts and upto 50 m lead etc. complete as per direction of the engineer- in-charge:-, dismantling doors, windows and clerestory windows(steel or wood) shutter including chowkhats,architrave, holdfasts etc. complete and stackingwithin 50 metres lead :, providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --all work upto plinth level:, providing corrugated g.s. sheet roofing includingvertical/curved surface fixed with polymer coated jor l hooks, bolts and nuts 8 mm diameter withbitumen and g.i. limpet washers or with g.i. limpetwashers filled with white lead and including a coatof approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever requiredetc. complete as per direction of engineer-in-charge., providing ridges or hips of width 60 cm overall widthplain g.s. sheet fixed with polymer coated j or l hooks,bolts and nuts 8 mm dia g.i. limpet and bitumenwashers etc. complete as per direction of engineer-incharge., providing and fixing 1mm thick m.s. sheet door withframe of 40x40x6mm angle iron and 3mm m.s. gussetplates at the junctions and corners, & with cleats withbolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:-, providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framedand fixed in position :, providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. all complete as per direction of engineerin-charge., finishing walls with water proofing cement paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the engineer in charge., finishing with epoxy paint ( one or more coats ) ofapproved brand and manufacture at all locationsprepared and applied as per manufacturersspecification on old work including preparation ofsurface etc. as required complete as per direction of the engineer in charge:- on steel work.

State Government

CTN :39373897

03 Mar, 2025 9.95 Lacs

Muktasar - Punjab

Tender For special repair of main items at judicial court complex, malout - civil, dismentling glazed tiles (to be carefully removed), scraping cement plaster., 12.5 mm thick cement sand plaster 1:5, removing doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. doors of area 3 sqm and below, deodar wood chowkhats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. single rebate (60mmx100mm), painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade., factory manufactured solid flush door fixed in position hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position cost : is2202-1(1999) commercial with elm or gurjan facing on both/sides with laminated core and lipped edges. 35 mm thick., applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface., finishing wall with exterior decorative cement based on water soluble paint such as snowcem, robbiacem etc. two or more coats to give an even shade., preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete., distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade., precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 (1 cement 3 sand) with neat cement slurry between joints and over the base for floors, treads of steps and landings., finishing walls with textured exterior paint of required shade with two or more coats applied@ 3.28 litre/10 sqm over and including base coat of water proofing cement paint applied@2.20 kg/10 sqm., providing & fixing glass panes with nails and putty or wooden strip complete in all respect. glazing area above 0.09 sqm. 4mm thick or 10.78 kg/ sqm., cost of aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (excluding sliding bolt). for shutter area above 0.50 sqm., credit of doors with chawkhats, public health, providing, installing, testing & commissioning of air conditioners split casting 1.5 tone-5 star invertor technology capacity units including suitable copper pipe, waste pipe, angle frames / stand with outdoor etc. of reputed make such as carrier /voltas complete in all respects., credit of old material, indoor unit 1.50/ 2.00 ton, outdoor unit 1.50/ 2.00 ton

CTN :39402522

12 Mar, 2025 60.35 Lacs

Chandigarh - Chandigarh

Tender For supply of stagging and shuttering materials - shuttering plate size 1 point 00 x 1 point 20 mtr , shuttering plate size 1 point 00 x 1 point 00 mtr , shuttering plate size 1 point 00 x 0 point 60 mtr , shuttering plate size 1 point 00 x 0 point 50 mtr , shuttering plate size 1 point 00 x 0 point 30 mtr , shuttering plate size 1 point 20 x 1 point 20 mtr , shuttering plate size 1 point 20 x 0 point 30 mtr , shuttering plate size 1 point 20 x 0 point 60 mtr , ms pipe 40 nb 06 mtr long , ms pipe 40 nb 04 mtr long , ms pipe 40 nb 03 mtr long , nut and bolt for shuttering plate , swivel coupler 40 nb , adjustable stirrup head

CTN :39402879

12 Mar, 2025 18.40 Lacs

Hanumangarh - Rajasthan

Tender For supply of ms swivel coupler 50 mm dia , ms scaffolding adjustable prop jack 600 mm dia , ms scaffolding adjustable base plate pipe 35-40 mm , adjustable shuttering prop jack ms 3 x 3 mtr , non woven geotextile filter fabric 200 gsm

CTN :39417715

27 Feb, 2025 NA

Jamalpur - Bihar

Tender For supply and fitment of galvanized iron (gi) rolling shutter (size-11.5 ft(h) x 10 ft (w) ) thickness-1mm features:- zinc applied to iron to prevent rusting with high quality corrosion resistance, operation - gear operated . paint-anti rust paint ideal for commercial and industrial use. make tata/jindal. or similar [ warranty period: 30 months after t he date of delivery ]

Central Government/Public Sector

CTN :39369866

10 Mar, 2025 23.19 Lacs

Jaduguda - Jharkhand

Tender For renovation of approach road of a b c type i ii and iiiquarters in ucil housing colony jaduguda - earth work in excavation , filling available excavated earth ,supplying and filling in plinth , providing and laying plaincement concrete 1 isto 3 isto 6 , providing and laying inposition cement concrete , providing and laying reinforcedcement concrete work , steel reinforcement , providing andlaying 1st class brick work , half brick masonry with common burnt clay f.p.s , providing and laying 12 mm thickcement plaster , providing 15 mm thick cement plaster ,providing and laying 12 mm thick cement plaster 1 isto 4 ,providing and fixing centering and shuttering ,transportation of excavated earth , surface dressing of theground

CTN :39195895

25 Feb, 2025 NA

Bijapur - Karnataka

Tender For corrigendum : supply of shuttering and other items - shuttering plate size 1 point 2 into 1 point 2 mtr , shuttering plate size 1 into 1 mtr , shuttering plate size 1 into 0 point 60 mtr , shuttering plate size 1into 0 point30 mtr , ms pipe 06 mtr long , right angle coupler , swivel coupler , nut and bolt centring shutring

Shuttering Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector