Get complete information related to latest Signalling Flares Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Signalling Flares Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Signalling Flares Tenders.
Tender For bid to ras bid to ras supply of audio conferencing system - digital chairman unit with display , dual digital delegate unit with display , dual digital delegate unit without display , high directive microphones , fully digital ip based control unit , system server , digital signal processor , management software , installation and commissioning
Tender For supply of 55 smart ultra hd led tv , 65 inch uhd led tv , motorized projection screen , ptz video conferencing camera , center controler unit , pa chairman unit conference system , pa delegate unit conference system , wireless lapel microphone , rj45 distributor switch , patch cord 2 mtr cat 6a , patch cord cat6 20 meters , digital signal processer dsp unit , audio power amplifier , wall mount speaker , ceiling speaker , usb 3. 0 cable male to female 10 meter , hdmi switcher , hdmi extender splitter , control keypad , 8 port poe switch , 17u lockable rack with pdu and cooling fan , camera mounting kit , cables, connectors and other fixture consumables , installation charges installation testing and commissioning of above equipments and programming of dsp
Tender For supply of 32 channel digital mixer with stage rack and control interface , chairman delegate system 1 of 5 , 4 channel power amplifier , 2-channel active di box , shock mount for sennheiser gooseneck microphone , 16 channel audio mixer , hdmi cable 30 mtrs , signal or audio cable 300 mtrs
Tender For e-tender two packet tender system for " provision of catering services as general minor unit (gmu-5) on platform no.4&5, near signal rs-103 (water tap sur end at pune railway station earmarked for 33% women quota.
Tender For purchase of equipments - purchase of equipment, 1. configuration design an 8-channel battery analyzer and its accessories 2. power 425 w3. voltage measuring range: 25 mv to 5 v, discharge minimum voltage: 0v or better, accuracy: 0.05% of fs4. current range: 0.5 ma to 6 a, accuracy: 0.05% of fs or better 5. power per channel output power: 30w, stability; +/- 0.1% of fs or better6. time rise time: 1ms (0~full range)7. frequency 10hz8. charge mode of operation: cc, cv, cccv, cp end conditions: voltage, current, relative time, capacity.9. discharge mode of operation: cc, cv, cp, cr, end conditions: voltage, current, test time, capacity, energy.10. pulse mode charge: cp mode, cc mode, discharge: cc mode, cp mode, min pulse width: 500ms, automated switch: automated switch from charge to discharge for each pulse end condition: voltage, relative time11. dcir support for the calculation of the point of the dcir12. cycle cycles: 1 65500 or better, steps: 250 or better, nested function: max three levels of loops13. protective function software, power-down data protection, user-defined safety (upper and lower) tolerance of current, voltage, and delay time14. channel features independent pairs of closed loops for the constant current source and constant-voltage source15. test reports and curves for analysis different types of curves created by software based on user definition. (voltage-time curve, current-time curve, capacity-voltage curve, loops times charge/discharge capacity curve, loops times charge/ discharge efficiency curve, etc.), data reports created by the software. comparison of the performance of the batteries tested in channels, both visually and statistically16. channels independent control17. ac input ac 220v 10% / 50hz 18. voltage and current testing sample 4 wire connecting 19. noise 85db20. data management mysql database21. communication means tcp/ip protocol22. data output excel, txt23. communication interface ethernet port24. number of channels per cabinet 825. accessories: 1. bi-potentiostat: electrochemical workstation or moduletechniques the system should be capable of running the rde / rrde technique simultaneously cyclic voltammetry (cv) with simulation/fitting programs linear sweep voltammetry (lsv) with stripping bulk electrolysis with coulometry (be) differential pulse voltammetry (dpv) with stripping normal pulse voltammetry (npv) with stripping tafel plot (tafel), potentiodynamic deactivation, pitting corrosion, corrosion rate, linear polarization, corrosion current, etc. multi-current steps (istep) amperometric i-t curve (i-t) lifetime testing open circuit potential time (ocpt) chrono amperometry (ca) chrono coulometry (cc) chronopotentiometry with current ramp (cpcr) potentiometric stripping analysis (psa) auxiliary signal measurement channel ir compensation external potential input galvanostatic charge discharge single/multiple cycle -chrono potentiometry (cp) with potential limits, polarity by potential or time, no. of cycles etc. voltage vs current density curves single or multiple potential steps with charge limits, single or multiple current steps, mixed voltage/current control using macro. i-v measurements, i max, pmax, fill factor, etc.impedance ac impedance (imp) 10 hz to 3mhz impedance time (impt) (mott-schottky) impedance potential (impe) impedance simulator with fitting open circuit potential time (ocpt)hardware specification of bi-potentiostat workstation/ module: potentiostat / galvanostat module, 2- or 3- or 4-electrode configuration maximum potential: 10v, maximum current: 250 ma peak or better and 2 amps with +/-25 volts for higher current measurement. compliance voltage: > 13v or better, potentiostat rise time: 300 ns or better galvanostat applied current range: 3na to +/- 100ma or better and upto 2 amps applied current accuracy: 20 pa or better input bias current: 1 pa or better cv and lsv scan rate: 0.000001 to 10,000 v/s. ca and cc pulse width: 0.0001 to 1000 sec imp frequency: 0.00001 t
Tender For corrigendum : supply of point machine and variouse other items as per boq attached inspectioon rdso rites consignee - supply of point machine irs type 220 mm stroke clamp type as per irs s$-24/2002 (amendment 1) or latest.(inspection agency:- rdso), supply of q-series led ecr (universal type i.e.qecx-61), 4f/4b complete with plug board(base plate), connectors, retaining clips etc. and conforming to brs: 941a sts / e / relays / ac lit led signal / 09 - 2002, amdt.-1 or latest and rdso spec.no.irs: s - 34, s- 23 or latest, as applicable. the interlocking code for this unit shall be "abdhk". (inspection by rdso)., contactor unit (qbca1 type), 24 v dc, 2hf / 4b complete with plug board (base plate), connectors, retaining clips etc and conforming to brs- 943 and rdso specn. no. irs : s - 34, s- 23, s - 60 or latest, as applicable. th e interlocking code for this unit shall be "bcejk". (inspection by rdso)., q-series magnetically latched neutral line relay (ql1 type), 11f / 4b, 24v dc complete with plug board (base plate), connectors and retaining clips and con forming to brs-935a and rdso specn. no.irs : s - 34, s - 23 or latest, as applicable. the interlocking code for this unit shall be "abdeg.(inspection by rdso)., supply of basic material to construct unit maintenance free earth as per rdso specs. no. rdso/spn/197 ver. 1.0 or latest to achieve a resistance less than 1 ohm. it consist of following:(a) copper bonded steel electrode of minimum 3.0 meter long, minimum 17.0 mm dia with copper bonding thickness of minimum 250 microns and ul listed and marked = 1 no. (b) earth enhancement material supplied in sealed bags of minimum 10 kg = 3 nos. (c) copper strip of 150x25x6 mm, to terminate earth rod = 1 no. (d) copper strip of 300x25x6 mm (meeb) = 1 no. (e) copper strip of 150x25x6mm (seeb) = 1 no. (ii) supply of 35 sq. mm multi strand single core pvc insulated copper cable as per is: 694 for connecting main earth electrode to meeb in the equipment room in duplicate. (minimum 10 meter.) (iii) supply of 16 sq. mm multi strand single core pvc insulated copper cable as per is: 694 for connecting meeb to seeb and spd to meeb (minimum 10 meter.) (iv) supply of 10 sq. mm multi strand single core pvc insulated copper cable as per is: 694 for connecting various equipments to seeb (v) supply of copper lug sleeve for 3/16 cable.(inspection by consignee)., supply of master telephone with voice logging facility for electronic lc gate telephone system as per specification no: rdso/spn/tc-51/2011 revision 3.0 with amendment no. 1 or latest. (inspection by rites)., electronic lc gate slave telephone system with voice recorder as per rdso specification no. rdso/spn/ tc/51/2021 revision 1.0 (inspection agency:- consignee), supply of centralized power supply system 24 volts dc power pack with 7ah mf battery for electronic lc gate telephone system as per rdso spec:- no. rdso / spn / tc / 51 / 2011 (rev. 3.0) amdt - 1 or latest.(inspection agency:- consignee), supply of optical power meter, type-b, as per tec spec. gr / opm - 01 / 03 feb. 2005 or latest. (make & model khushicom-k280) or similar branded make. (inspection by consignee)., supply and testing of optical laser light source of make- jdsu model- ols-35 or similar branded make.(inspection agency:- rites), supply of optical laser torch of reputed make. (make & model-proskit mt-7530) or similar branded make. (inspection agency: - consignee), supply of automatic fusion splicer for single mode optical fibre cable, along with accessories as per tec spec. tec/gr/tx/osm 001/04/sep-12 or latest of make superior/fujikura or similar. consignee shall approve the supply only after successful demonstration at site. (inspection agency:- rites), supply of otdr suitable for 1310/1550nm fiber with resolution of 60 cm, dynamic range of 314/29 db with all accessories for working on single mode optical fiber as per tec spec. tec/gr/tx/otd 001/05/sep-19 or latest, of reputed make like yokogawa/zdsu/viavi or
Tender For installation of traffic light signal system at chaneti chowk jagadhri and buria chowk jagadhri in m.c. yamunanagar-jagadhri. (for l/c society ltd)
Tender For supply of matlab , simulink , signal processing toolbox , dsp system toolbox , communication toolbox , fixed-point designer , soc blockset , deep learning toolbox , statistics and machine learning
Tender For maintenance & operation of e&m services in parliament house annexe, new delhi (sh: restoring network connectivity and signal coverage in different buildings in parliament house complex for security system and communication system etc.)