Signpost Tenders

Get complete information related to latest Signpost Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Signpost Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Signpost Tenders .

Filter

Loading....

Get Tender in Email

Central Government And Public Sector

CTN :39403367

13 Mar, 2025 12.27 Lacs

Chamba - Himachal Pradesh

Tender For corrigendum : supply of three phase electric motor as per atc doc , pump element for dual line grease pump dlgp 50 08 for miv assy item no 5 drg no dlgp 50 08 338 , reduction gear box,type-a237, ratio 70 by 1, ,item no-6, drg no- dlgp-50-08-338797 , direction control valve,model- 4we01 j 33 c w230 n9k4, item no-12,drg no-dlgp-50- 08-338797 , direct operated pressure relief valve,model-dprh06t315-11 11by09, item no-11,drg no-dlgp-50-08-338797 , coupling, item no-3,model-l 095,drg no-dlgp-50-08-338797 , dose feeder, model- dw-43, drg no-dlgp-50-08-338797 , straight connector 12 odx3by8 bsp ,item no-16,drg no-dlgp- 50-08-338797 , pressure gauge ,100mm dial,range- 400kg per cm2,for end pressure relay,drg no-dlgp- 50-08-338797 , dose feeder, model- dw-44, drg no- dlgp-100-08-338796 , ball valve 18 odx1by2 bsp, 500 bar,drg no-dlgp-100-08-338796 , straight union 10 od x1by4 bsp, item no-16,drg no-dlgp-100-08-338796 , ferrule 10 mm, item no.12, drg no. dlgp-100-08- 338409 , ferrule 18 mm, item no.12, drg no. dlgp-100- 08-338409 , ferrule 8 mm, item no. 12 , drg no-dlgp- 50-08-338410 , ferrule12 mm, item no. 12 , drg no- dlgp-50-08-338410 , control panel , grease gun pump

CTN :39237206

07 Mar, 2025 NA

Delhi - Delhi

Tender For corrigendum : tender for supply of placing ornamental furniture at 20 akbar road new delhi - providing & placing in position wooden tv wall panel of size approx 1740mm x 2440mm ht x 50mm thick as per approved design fixing 50mm x 25mm hollock wood batten on inside as frame of the panel , panel base shall be made up of 19mm thick commercial ply of make duro green or equivalent and fifixing 18mm thick hdhmr ply of make action tesa or equivalent on on outer exposed surface of the panel providing fluiting design on the exposed panel with the help of 25 x 10mm teak wood bidding , finally finishing exposed panel area with the help of high quality high gloss polish of make sirca or equivalent the cost including all necessary nails screws fevicol etc all complete as per the direction of engineer in charge , providing & placing in position wooden tv wall panel of size approx 2400mm x 2440mm ht x 45mm thick as per approved design fixing 50mm x 25mm hollock wood batten on inside as frame of the panel panel base shall be made up of 19mm thick commercial ply of make duro green or equivalent and fifixing 18mm thick hdhmr ply of make action tesa or equivalent on on outer exposed surface of the panel providing fluiting design on the half exposed panel with the help of 25x10mm teak wood bidding and othe half portion shall be consisting of 1mm thick laminate as per approved shade , finally finishing exposed panel area with the help of high quality high gloss polish of make sirca or equivalent , the cost including all necessary nails , screws , fevicol etc. all complete as per the direction of engineer in charge. , providing & placing of wooden wall panelling with fluiting design having 2 nos. door shutter , panelling of size approx 4460x3100mm ht , , providing & placing in position wooden tv wall panel of size approx 2345x2345mm , having bottom cabinet of size approx 2045x375x260mm ht. and open shelve cabinet of size approx 380x415x2345mm ht , , providing & placing in position wooden vanity counter of size approx 1520x540x580mm ht as per approved design and drawing , the vanity top , bottom , sides , shelve , middle partition , drawer head shall be made up of 19mm thick commercial ply of make duro/green or equivalent , , providing & placing in position wall hung wooden cabinet of size approx 2400x360x270mm ht , as per approved design , the cabinet top , bottom , side , shelve , middle partition , drawer head , unit back shall be made up of 18mm thick hdhmr ply of make action tesa or equivalent , , providing & placing in position wooden vanity counter of size approx 1535x665x870mm ht , as per approved design , the vanity top , bottom , side , front fix , drawer head , partition , shelve , upper box unit shall be made up of 18mm thick hdhmr ply of make action tesa , providing & placing in position wooden vanity counter of size approx 2240x550x710 mm ht , , providing & placing in position wooden vanity counter of size approx 820x600x560mm ht , as per approved design , providing & placing in position wooden vanity cabinet of size approx 1525x610x580mm ht. as per approved design , the cabinet top , bottom , providing & placing in position wooden vanity counter of size approx 2470x610x640mm ht , as per approved design , the cabinet top , bottom , side , partition , shutter , drawer head , , providing & placing in position wooden tv unit of size approx 3400mm x 540mm x 2360mm ht , as per approved design , the tv unit shall be having 2 nos wardrob with shutter on both side and cabinet with shutter on bottom , providing & placing in position wooden side table of size approx 460mm x 400mm x 530mm ht , as per approved design , the table top , bottom , side , drawer head , skirting shall be made up of 18mm thick hdhmr ply of action/tesa or equivalent make , providing & placing in position wooden side table of size approx 540mm x 460mm x 540mm ht , as per approved design , the table top , bottom , side

CTN :39543982

10 Mar, 2025 1.37 Crore

Patna - Bihar

Tender For mr-n- 19-20 pupri-09 - choraut bazar to purandih, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., semi-dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of panel concrete, plain cement concrete pavement, thickness as per design over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501, kilometre stone :- reinforc

CTN :39403454

13 Mar, 2025 NA

Delhi - Delhi

Tender For tender for supply of providing making and placing in position wooden bed side table as per approved design and size the table top bottom inner frame shall be made up of 18mm thick hdhmr ply of make action tesa or equivalent back panel in round consisting of 12mm thick flexible ply front drawer made up of 18mm thick hdhmr or equivalent or first class teak wood as per approval drawer side drawer back and drawer base shall be made up of 12mm thick hdhmr ply round back side shall be finished upholstered with approve shade fabric with help of 12mm thick pu foam of make sleepwell or equivalent exposed wooden surface shall be finished with high quality high gloss polish of make sirca or equivalent the cost including all necessary quadro channel 250mm nails screws fevicol etc all complete as per the direction of the engineer in charge round table dia 460mm height 480mm , providing making and placing in position wooden shoe rack of size approx730x200x1550 mm ht as per approved design the rack top bottom side shelve shall be made up of 19mm thick commercial ply of duro green or equivalent make and finished with 1mm laminate on all exposed and inner surfaces unit back shall be consisting of 6mm thick commercial ply all the exposed edges shall be covered with edge binding pvc tape finally finish all the exposed wooden surface with high quality high gloss polish of make sirca or equivalent the cost including all necessary nails screws fevicol etc all complete as per the direction of the engineer in charge , providing making and fixing in position wooden almira of required size as per approved design the cabinet top bottom side shutter skirting shelve drawer head shall be made up of 18mm thick hdhmr ply of make action tesa or equivalent and finished with 1mm thick decorative mica on all inner surfaces drawer side drawer back made up of 12mm thick commercial ply unit back and drawer base shall be made up of 6mm thick commercial ply all the exposed edges shall be covered with wooden margin finally all the eposed wooden surface shall be finished with high gloss polish of make sirca or equivalent the cost including all necessary hinges l vihari magnetic catcher nails screws fevicol etc all complete as per the direction of the engineer in charge almira 710x510x2390 mm ht , providing making and fixing in position wooden almira of required size as per approved design the cabinet top bottom side shutter skirting shelve drawer head shall be made up of 18mm thick hdhmr ply of make action tesa or equivalent and finished with 1mm thick decorative mica on all inner surfaces drawer side drawer back made up of 12mm thick commercial ply unit back and drawer base shall be made up of 6mm thick commercial ply all the exposed edges shall be covered with wooden margin finally all the eposed wooden surface shall be finished with high gloss polish of make sirca or equivalent the cost including all necessary hinges l vihari magnetic catcher nails screws fevicol etc all complete as per the direction of the engineer in charge almira 860x330x2400 mm ht , providing making and placing in position wooden stool of required size and approved design the stool legs side frame shall be made up of first class teak wood with required size and section the stool top shall be consisting of 18mm thick hdhmr ply of action tesa or equivalent make finally all the wooden surface shall be finished with high quality high gloss pu polish of sirca or equivalent make the cost including all necessary nails screws fevicol etc all complete as per the direction of the engineer in charge 450x450x550 mm ht , providing making and placing in position wooden stool of required size and approved design the stool legs side frame shall be made up of first class teak wood with required size and section the stool top shall be consisting of 18mm thick hdhmr ply of action tesa or equivalent make finally all the wooden surface shall be finished with high quality high gloss pu polish of sirca or equivalent m

CTN :39321263

05 Mar, 2025 30.13 Lacs

Delhi - Delhi

Tender For tender for supply of providing making and fixing in position wooden almira with aluminium framed glazed shutter of size approx 2840 , 590 , 2310mm ht depth approx 590mm 600mm , as per approved design , the almira top , bottom , side , partition , shelve , skirting shall be made up of 19mm thick commercial ply of make duro green or equivalent and finished with 1mm thick laminate on all outer exposed and inner surface , unit back shall be consisting of 6mm thick commercial ply , all the exposed edges shall be covered with 20mm to 25mm wide edge binding pvc tape , aluminium shutter with 45 , 25mm profile panel fixed with 8mm thick fluited glass of approved shade , the cost including all necessary , cotton rod , hinges l vihari 0 , nails , screws , fevicol etc. all complete as per the direction of the engineer in charge. front elevation of the almira shall be measure for the payment purpose , providing making and fixing in position wooden almira of size approx 1030 , 530 , 2370mm ht , with aluminium profile glazed shutter as per approved design , the almira top , bottom , side , shelve , partition , drawer head , skirting shall be made up of 19mm thick commercial ply of make duro green or equivalent and finished with 1mm thick laminate on all outer and inner surface , drawer side , drawer back , base , unit back shall be made up of 12mm commercial ply , shutter shall be made up of 8mm thick tinted glass with aluminium framed shutter as per approved design , all the exposed edges shall be covered with edge binding pvc tape , the cost including all necessary hinge l vihari 0 , nails , screws , fevicol etc. all complete as per the direction of engineer in charge. , providing making and fixing in position wooden showcase unit of size approx 4400 , 580 , 3130mm ht. having two side unit of size approx 990mm width , middle unit of 2420mm width and having one overhead unit of 790mm height. as per approved design , the showcase top , bottom , middle tops , shelve , partition , middle cabinet middle shutter , top overhead shutters , skirting shall be made up of 19mm thick commercial ply of make duro green or equivalent and finished with 1mm thick laminate on all outer exposed and inner surface , side cabinets and bottom side of middle cabinet shall be consisting of aluminium profile glazed shutter with fluited glass design , unit back shall be consisting of 12mm thick commercial ply , all the exposed edges shall be covered with edge binding pvc tape , both type of shutter shall be fixed with l vihari hinges of hettich or equivalent make , the cost including all necessary hinges , profile shutter , nails , screws , fevicol etc. all complete as per the direction of the engineer in charge. , providing making and placing in position wooden overhead cabinet of size approx 1200mm , 400mm , 600mm ht , as per approved design , the cabinet top , bottom , side , shutter , shelve , unit back shall be made up of 18mm thick hdhmr ply of action tesa or equivalent make , and finished with 1mm laminate on inner surface , all exposed edges shall be covered with edge binding pvc tape , finishing outer exposed wooden surface with high quality high gloss polish of make sirca or equivalent , the cost including all necessary hinges l vihari 0 , nails , screws , fevicol , fastner etc. all complete as per the direction of engineer in charge. , providing , making and fixing in position wooden palmet of size approx 370mm depth and 200 mm wide face , as per approved design , the palmet top , side , front shall be made up of 19mm thick commercial ply of make duro green or equivalent , and finished with 5.5mm thick hdhmr ply of make action tesa or equivalent , fixing on the top ceiling with the help of 100mm fastner , finally all wooden surface shall be finished with high quality high gloss polish of make sirca or equivalent , the cost including all necessary fastner , nails , screws , fevicol etc. all complete as per the direction of engineer in charge. running length

Loading, Please wait...

Signpost Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector