Latest sliding plate Tenders | Government sliding plate Tenders

CTN :44784971

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/01/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) special repair 30069003322 bcnm1 (nlb) 2) er 10029695316 boxnr (nlb) steel body 3) wr 10089660538 boxnm1 (nlb) 4) special repair 30069032001 bcnm1 (nlb) 5) special repair 30069003650 bcnm1 (nlb) 6) er 72029661388 bobrnm1 (nlb) 7) er 72029681850 bobrnm1 (nlb) 8) cr 10019601051 boxnm1 (nlb) 9) nr 30039006728 bcnm1 (nlb) 10) se 10079632712 boxnm1 (wm) nb: (1): i) wagons are to be sold without 18 nos. nlb trolleys against special repairl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 10. iii) wagon special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44784972

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/02/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) se 12079560026 boxnhsm1 (nlb) 2) se 25079662607 boxnr (nlb) steel body 3) se 75079260396 bobsnm1 (nlb) 4) se 75079260365 bobsnm1 (nlb) 5) se 75079216683 bobsnm1 (nlb) 6) special repair 10069649256 boxnm1 (nlb) 7) sc 30099081895 bcnm1 (nlb) 8) se 25079661693 boxnr (nlb) steel body 9) sc 30099060968 bcnm1 (wm) nb: (1): i) wagons are to be sold without 16 nos. nlb trolleys against special repairl. no. 01 to 08. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 09. iii) wagon special repairl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Central Government/Public Sector

CTN :44753562

13 Apr, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of drg.31205256005 rev.00 with matl. as per specn. aa10109 rev.03 , sliding plate hw609.107 as per drg.31205256007 rev.00 with matl. as per specn. aa10109 rev.03 , locking plate hw609.12 as per drg.41205256012 rev.00 with matl. as per specn. aa10109 rev.03 , plate hw609.14 as per drg.41205256014 rev.00 with matl. as per specn. aa10109 rev.03 , plate hw617.05 as per drg.31122656050 rev.00 with matl. as per specn. aa10109 rev.03 , bracket hw626.02 as per drg.31208256001 rev.00 with matl. as per specn. aa10109 rev.03 , holderhw629.01 as per drg.21204058001 rev.00 with matl. as per specn. aa10119 rev.15 , plate hw630.02 as per drg.41204456402 rev.00 with matl. as per specn. aa10119 rev.15 , washer 160x72x30 hw605.54 as per drg.41203756054 rev.00 with matl. as per specn. aa10122 rev.15 , washer hw605.55 as per drg.41203756055 rev.00 with matl. as per specn. aa10122 rev.15 , distance sleeve hw628.02 fully mcd item as per drg. 41209856001 rev.00 with matl. aa10455 rev.10 , plate 5x70x50 stafe410 wa hw607.15 with matl. as per specn. aa10108 rev.11 , plate 5x70x172 stafe410 wa hw607.16 with matl. as per specn. aa10108 rev.11 , plate 5x70x206 stafe410 wa hw607.17 fully mcd item as per specn. aa10108 rev.11 , plate 5x70x332 stafe410 wa hw607.18 with matl. as per specn. aa10108 rev.11 , plate 5x70x402 stafe410 wa hw607.19 with matl. as per specn. aa10108 rev.11 , plate 5x70x242 stafe410 wa hw607.20 with matl. as per specn. aa10108 rev.11 , plate 5x70x1647 stafe410 wa hw607.21 with matl. as per specn. aa10108 rev.11 , sheet 3x170x720 hw624.01 afully mcd item as per specn. aa12028 rev.06 , channel 100x50 l3420 stafe410 wachanelhw610.02 with matl. as per specn. aa10108 rev.11 , lifting plate hw659.05 fully mcd item as per drg. 31204430305 rev.00 with matl. aa10119 rev.15 , lifting plate hw659.06 fully mcd item as per drg. 31204430306 rev.00 with matl. aa10119 rev.15 , spacer tube var.00 hw659.02 fully mcd item as per drg. 41204430302 rev.00 with matl. aa10455 rev.10 , spacer tube var.01 hw659.09 fully mcd item as per drg. 41204430302 rev.00 with matl. aa10455 rev.10

CTN :44423934

10 Apr, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of 12411613005 tooth , 12411608005 wedge , 12090230 2654407 oil filter , 12090225 fuel filter water separator , 20020003 3611274 fuel filter , 12680301 air filter large , 12680302 air filter small , 12180650 hydraulic oil filter , 12197232 glass , 20026465 hyd hose , 20094344 hyd hose , 12197206 front window upper part , 12197231 front window bottom part , 12197294 wiper blade , 12197205 door complete , 12028063 axle stube , 16730215 o ring for gear pump , 12119212 control block m7 complete , 13809203 pressure limiting valve m6 block working hydraulics , 12119215 pressure limiting valve m7 block slewing gear , 12087478 hose set complete upper structure and cabin , 12270450 fan motor complete a2fm12 210 bar 12v , 20009789 fan valve 210 bar , 20002808 cooler fan , 12270430 temperature sensor water hydraulic , 12270428 temperature sensor inter cooling , 12195775 radiator cap complete , 10950995 repair kit fuel transfer pump , 20011130 manual venting pump compl , 12090351 water pump , 12090205 thermostat , 12090204 sealing for thermostat , 20020014 tensioner poly v , 12205794 bolt main boom cylinder upper , 12205792 bolt main boom cylinder lower , 12047706 bushes for main boom assembly , 12163506 shear , 12063146 bolt for connecting rod shear , 12063150 bucket bolt , 12165537 pvc sliding plate , 12165544 pvc sliding plate , 12165542 pvc sliding plate , 20040444 pvc plate small , 16718100 washers , 12165540 shim , 16180400 screws m18x40 for inner tube , 16718230 washers m18 , 12079150 1 inch vt screw coupling , 12079200 1 by 2 inch screw copling , 12106930 trim switch , 12106940 push button , 12106707 switch with led , 12602303 foot pedal , 12197218 working light , 12207010 pad cylinder up down , 12601158 seal kit for undercarriage cylinder , 20001429 shut of valve , 20026662 safety valve , 20002781 relief valve 350 280 bar , 12079250 1 inch mt screw coupling , 12162076 seal kit for bucket cylinder

Central Government/Public Sector

CTN :44720113

09 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s ferrous cbc complete, cbc coupler body, yoke, knuckle in full/broken condition with/without screw coupling, with/without striker casting, with / without rubber attachment, with / without coupler body, coupler body with shank wear plate in as is where is condition. note: loading by crane / jcb permitted. pl.no. 98050126. custodian: cdms-rsf-gsd-per. location: bin o

Central Government/Public Sector

CTN :44670865

28 Mar, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot miscellaneous scrap - ubl/gsd/a-15/rubber /25/k [pl no. 98415451]. condemned and un- serviceable rubber scrap consisting of rubber packing ring, pachip disk, split off, hose rubber, happy pad, rubber tube for tyres, memo demo rubber pad, vestibule rubber cut parts, rubber filters, rubber wiper blade, packing head disc, , wear half, thrust pad, happy pad, spacer bag, sand box hose, cylinder wear half, rubber pad for draft gear, tm below rubber, air deck neoprene, joint bonded rubber, rubber packing ring, gasket coupling, elastomeric bearing with attachment of ms, tube, rubber buffer pad, welding hose pipe, sand hose, pad bonded contact with or without ms attachment and attachment of nylon, plate wear, all type rubber hose pipes with of with ms attachment, bp and fp hose pipes with or without ms attachment and other all type of rubber scrap with or without ms attachment. available under the custody of dms c&r ward gsd/ubl. note: bidder has to physically inspect the lot before bidding, location: road no 01, a-block gsd / ubl at bin no a-15. remarks-. delivery should start from one end. no pick and choose allowed

Central Government/Public Sector

CTN :44670951

31 Mar, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - scrap of cs and ms containing release unserviceable material of c&w qty 95.00 mt such as such hex head bolt & castel nut, door sealing bracket, door chainless cotter short, swing door bolt eye, man hole cover, vapour extractor cock, filling pipe cap, valve spindle gland, gland for 100 mm lubricated t.p. valve, locking plate, bolster inner spring, wear plate brake beam, brake beam, side frame key for ctrb, bolster spring snubber, key bolt with spring washer, side frame friction liner, top side bearer liner, height adjustment packing 37 mm, height adjustment packing 12 mm, empty tie rod, loaded tie rod, main pull rod short, control rod for btpn, knuckle thrower, shank wear plate for cbc, bearing piece assembly, safety loop, brake beam support, locking bracket, spring for bk head (wm), empty load device, end push rod, brake beam hanger (wm trolley), operating arm, brake head adjuster (wm), pin with split pin for bk beam (wm), flap door, door check spring, bolt with nut, rivets ms, split pin, bulb cotter, washer ms black dia m, m.s. channel, angle, round steel bar, ms flat, stud for locking plate, top housing for pu pad, wedge for casnub bogie, center pivot bottom, center pivot top, narrow jaw adapter, wide jaw adapter, p.u. pad, hand brake screw with nut, main pull rod assembly (slack adjuster side), knuckle ht, coupler rod, lock for cbc box, knuckle pin, yoke pin for cbc, handle for center brake rigging, roller for bogie pull rod, automatic twist lock shaft, damaged flappers of gantry, brake beam of casnub bogie, diaphragm, fasteners, brake shoe, sab parts, follower plate etc. location scrap yard krca, near new sick line office. delivery by actual weight only and as is where is basis. custodian sse c&w krca. fdp 50 days. the lot details is as per survey sheet only. delivery will be given after the full payment only

Central Government/Public Sector

CTN :44670956

31 Mar, 2026 NA

Multi City - Gujarat

Tender For corrigendum : auction sale of others - scrap of cs and ms containing release unserviceable material of c&w qty 45.00 mt such as such hex head bolt & castel nut, door sealing bracket, door chainless cotter short, swing door bolt eye, man hole cover, vapour extractor cock, filling pipe cap, valve spindle gland, gland for 100 mm lubricated t.p. valve, locking plate, bolster inner spring, wear plate brake beam, brake beam, side frame key for ctrb, bolster spring snubber, key bolt with spring washer, side frame friction liner, top side bearer liner, height adjustment packing 37 mm, height adjustment packing 12 mm, empty tie rod, loaded tie rod, main pull rod short, control rod for btpn, knuckle thrower, shank wear plate for cbc, bearing piece assembly, safety loop, brake beam support, locking bracket, spring for bk head (wm), empty load device, end push rod, brake beam hanger (wm trolley), operating arm, brake head adjuster (wm), pin with split pin for bk beam (wm), flap door, door check spring, bolt with nut, rivets ms, split pin, bulb cotter, washer ms black dia m, m.s. channel, angle, round steel bar, ms flat, stud for locking plate, top housing for pu pad, wedge for casnub bogie, center pivot bottom, center pivot top, narrow jaw adapter, wide jaw adapter, p.u. pad, hand brake screw with nut, main pull rod assembly (slack adjuster side), knuckle ht, coupler rod, lock for cbc box, knuckle pin, yoke pin for cbc, handle for center brake rigging, roller for bogie pull rod, automatic twist lock shaft, damaged flappers of gantry, brake beam of casnub bogie, diaphragm, fasteners, brake shoe, sab parts, follower plate etc. location scrap yard krca, near new sick line office. delivery by actual weight only and as is where is basis. custodian sse c&w krca. fdp 50 days. the lot details is as per survey sheet only. delivery will be given after the full payment only

Sliding Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector