Latest smc meter Tenders | Government smc meter Tenders

Central Government/Public Sector

CTN :41017932

11 Aug, 2025 NA

Multi City - Multi State

Tender For supply of ferritic steel sheet 8x1250x3000mm., as per drawing: is:6911-1992,grade x04cr1 2 (405), surface finish 2d as per tab. 8., packing instruction: stainless steel sheets, coils an d plates:- (a) stainless steel (austenitic & ferritic steel) coils. the coil shall be protect ed in reasonably good condition to withstand normal handling hazard during transit with the following provision as the barest minimum: i) coil should be wrapped with a la yer of water proof paper through out whole length. ii) coil should be wrapped with a l ayer of biodegradeable sheet. iii) outer & inner of coil should be wrapped with gi sheet . iv) side of the coil should be covered with card board sheet. v) after this whole coil should be wrapped with biodegradeable plastic sheet of suitable thickness. vi) the inne r edge of the coil should be protected by gi ring followed by another iron ring. vii) ou ter edge of the coil should be wrapped with gi ring. viii) coil should be securely strapp ed with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on t he circumference of the eye. ix) whole coil should be mounted on wooden blocks for e asy lifting/stacking. x) the sheets in coil form for thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 1000-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2mm shall have: inner dia of coil 450-650 mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 tonnes. (b) stainless steel (aust enitic & ferritic steel plates/sheets) i) the sheets/plates shall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate shall be seprated with a layer of water p roof paper, after this the whole bundle should be wrapped with double layer of water proof paper and a biodegradeable plastic sheet of suitable thickness. a metal protecti on in edges should also be provided. ii) all bundles shall have a minimum of 2 hoops upt o 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling. mecha nical damange & corrosion during transit if any shall be at the cost of supplier. , procti on procedure: covered in pi [ warranty period: 30 months after the date of delivery ]

Corporations/Associations/Others

CTN :40999686

14 Jul, 2025 NA

Wardha - Maharashtra

Tender For supplying and erecting various items under m.c.area wardha - electrical, design, manufacturing, supply and errection of hot dip galvanised, polygonal stadium masts with fixed head frame suitable for mounting 40 nos. of 500 w led pwd approved make flood light fixtures complete with all accessories as required. the height of the mast from base upto top of head frame shall be 33.0 mtrs. the mast has been designed considering base wind speed @ 44 m/s as per is 875 part-3.mast shall have foundation bolt, 1 nos. li with all accessories and and safety cage ladder for maintance purpose, supply of 500 w pwd approved make led lighting fixtures, making m-25 cement concrete foundation suitable by considering the safe soil bearing capacity at site as 10 t/sqmm at 2.5 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete.(for 33 m high mast as drawing enclosed)., supplying and erecting decorative high brightness led luminaires 1x60 watt high efficiency at reduced wattage. the luminaires comprises of specially contoured high strength and anti corrosion mounting on internally threaded pipe of designation m30, cable entries for through - wiring of main of main supply cable, earth connection safety class-i with ip65 protection, ce conformity mark, prewired with led driver suitable for operation on 240 v, 50 hz, single phase ac supply finished with pure polyster powder coated black: similar to specification of "k-lite make model juno - column light (model no. kp-7034)", supply, of external manrider unit with motorized system for accessing the head frame. the unit shall be suitable for safe load carrying capacity of 300 kg with climb speed not exceeding 9m/min., supplying and erecting architecturally designed and structurally sound arched tubular street lighting decorative pole of height 6000 mm, with single arm architecturally designed bracket having overhang of 1000 mm suitable for various pendent type street lighting luminaries material used for tubes steel of grades yst 210 groove technique using high end mig welding process the pole coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethene base black paint. the pole consist of built in control box with cast aluminum service door and safety rope the control gear tray is prewired with mcb, terminal connectors for loop out arrangement the pole surface mounted with base plate of steel of grade e250 as per is2062:2011, complete with foundation hardware on provided c. c foundation., supplying and erecting outdoor stand mounted feeder pillar for 33 mtr. high-mast of the same manufacturer with 1 no. 250 amp. mccb incomer, 4 nos 63 amp mccb for outgoing, 24hr astronomical time switch with minimum 5 years battery backup, 25 a tp contactor for automatic switching of luminaries, 2 no. 9a contactors and raise/lower push button, ryb phase indication 230 vac, 1 phase digital ammeter 0-600 amp., 1 phase digital voltmeter 0-500 va meter, with cts provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 swg crca sheet box with supporting angles, self lock, gasket and slanting top erected on cc foundation complete

CTN :40818098

15 Jul, 2025 5.00 Lacs

Ananthnag - Jammu And Kashmir

Tender For corrigendum : procurement of safety gears, tools and gadgets for enforcement wing of jklcma - supply of safety helmet as safety gear for demolition squad of enforcement wing. the basic minimum features of the item shall be ;1. colour = black.2. type = safety helmet shock /crash proof.3. confirm = isi confirmed.4. material = high grade thermoplastic.as detailed in nit, supply of sledge hammer. the sledge hammer for demolition squad of enforcement wing shall be : designed for heavy tasks that require extra force and effect such as demolition, dislodging etc. with wide diameter on both faces for better precision and impact. fitted with anti-slip and anti-shock ergonomic fibre glass handle of weight 10 kg.as detailed in nit, supply of sledge hammer. the sledge hammer for demolition squad of enforcement wing shall be : designed for heavy tasks that require extra force and effect such as demolition, dislodging etc. with wide diameter on both faces for better precision and impact. fitted with anti-slip and anti-shock ergonomic fibre glass handle of weight 5 kg.as detailed in nit, supply of carbon steel crowbar . the crowbar shall be : corrosion resistant color coated with preferably black color . other end of shall be chisel type. of 32 mm dia and 2 meter long as detailed in nit, supply of 10 mm dia fit fusion climbing rope consisting of : multi strand strong rope with suitable breaking resistance . length : 30 metersas detailed in nit, supply of first aid kit comprising items as detailed below in a stainless steel box;bandages: sterile adhesive bandages in assorted sizes, sterile gauze pads, and roller bandages in various widths for treating cuts, abrasions, and other injuries. antiseptics and disinfectants: antiseptic solutions or wipes, disinfectant liquids, and antiseptic creams or ointments to prevent infection. dressings: sterile eye pads, triangular bandages, and large sterile dressings for covering wounds and preventing further injury. medical tools: scissors, tweezers, safety pins, and disposable gloves to aid in the safe and effective administration of first aid. medications: pain relief tablets like paracetamol, antihistamine tablets for allergic reactions, and burn ointment or gel to provide immediate relief. miscellaneous items: cotton wool, adhesive tape, eye wash solution, and splints for immobilizing fractures. documentation: a first aid manual or instruction leaflet, a list of emergency contact numbers, and a record book for documenting first aid incidents and treatments.as detailed in nit, supply of leatherette fibre glass measuring tape case reinforced with stainless band dimensions 50 meters - 13 mm wide as detailed in nit, supply of safety hand gloves, p35 nba polyester (knitted seamless nitrile dipped gloves) 15 gauge smooth finish seamless liner coated with black safety gloves, tear proof , oil resistant , strong grip abrasive hand gloves size las detailed in nit, supply of durable eye protection glass. : anti fog , scratch resistant , eye protection for work, splash proof , uv protection as detailed in nit, safety shoessupply of safety shoes minimum features & durability anti slip oil, grease and acid resistant carbon steel toe protection ankle length medium color black upper material leather laces : closed typeshoe size indian : 9 --- - 3 nos 8 ----- 25 nos 7 ----- 22 nos as detailed in nit

State Government

CTN :40343602

15 Jul, 2025 NA

Rajkot - Gujarat

Tender For corrigendum : purchase of ht smc meter box

corporations/Associations/Others

CTN :40420978

18 Jul, 2025 3.27 Lacs

Kasimpur - Uttar Pradesh

Tender For corrigendum : procurement of lab instruments for chemical lab of ogcd, dtps, htps, kasimpur - sension5 portable conductivity meter specification range:#conductivity s/cm 0 to 19.99; 200 to 1999#conductivity ms/cm 2 to 19.99; 20 to 199.9#tds: 0 to 50,000 mg/l as nacl salinity: 0 to 42 g/l (ppt)#temperature: -10.0 to 105.0 c#resolution:#conductivity 0.01; 1.0#conductivity ms/cm 0.01; 0.1#tds: 0 .00-199.9 mg/l 0.1mg/l 2 00-1999 mg/l 1 mg/l 2 .00 -19.99 g/l 0.01 g/l 2 0-50 g/l 0.1g/l #salinity: 0.1 g/l (ppt)#temperature: 0.1 c#accuracy:#conductivity: 0.5% in the first 3 ranges, 1% at highest range #td of full scale #salinity: 0.1 ppt (-2 to 35 c) #temperature: 0.1 c# , make-hach, ph meter probe (ph meter sension ph3) cat no-lzw5010t.92.0002 make hachdetails in photograph enclosed in tender document, manual sieves shaker (with sieves set - mesh size-50,+100,+200) any standard make details in photograph enclosed in tender document, centrifugal machine for oil testing, any standard maketube capacity:no.12-24:size 15 mlshould have a digital timerbody should be made of strong fabricated & corrosion resistant steel.control panel- for start/stop switch, dynamic brakes, step less speed regulator with zero start switch & speed indicator with timer and protective fuses.door interlock.maintenance free brushless drive motor with exact speed preselection and display. speed range 100 to3000 rpm and above, accuracy 1 rpm. details in photograph enclosed in tender document, orset appratus (complete set), any standard make details in photograph enclosed in tender document, ph 2700 ph meter specification #ph range -2.000 to 20.000 ph #resolution 0.1 / 0.01 / 0.001 ph #accuracy 0.002 ph + 1 lsd #cal. points up to 6 preset or 5 custom #buffer sets usa, nist, din, user 1, user 2, custom #or range 2000.0 mv #rel. mv range 2000.0 mv on 0.1 mv# accuracy 0.2 mv #temperature,range (meter) 0.0 to 100.0 c / 32.0 to 212.0 f #resolution 0.1 c / 0.1 f #accuracy 0.3 c / 0.5 f #compensation atc / mtc #power requirements 9 v dc adapter, 1.3 a (100/240 vac, smps)# make- eutech

State Government

CTN :40901606

14 Jul, 2025 9.78 Lacs

Diu - Daman And Diu

Tender For providing erecting and fixing of electric pole accessories from check post main road to say site bucharwada panchayat area diu - supplying and erecting led street light fittings with high power white leds wattage of 3 watt and above assembled on single mcpcb, efficiency more than 130 lm/w and corrosion free high pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate optics/ lenses, with toughened glass with company mark/ name engraved or embossed 160 to 270v, power factor more than 0.95, thd 10%, cct 3000k to 5700k,uniformity ratio >0.45, luminaire efficacy> 100 lumens/ watt. led driver efficiency > 85%. (fittings required lm-79 & lm-80 certificates) (note: below description have shown ranges of wattage capacity of led fittings. the engineer in charge may select any wattage capacity between the ranges shown.) (a) street light (ip-65), surge protection- 4kv integral and, light must have 440vac line supply with over-voltage protection. 90 watts cat. ii (make: wipro, crompton, philips, bajaj, osram) as directed by the engineer-in-charge., providing and erecting street light pole bracket comprising main b class gi pipe of 4.2 cm/ require outside dia. complete with suitable b class g.i sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted with one coat of red oxide / pu base primer and two coats of aluminium / pu paint. paint with following nos of arms. single arm bracket 1 mtr, providing and erecting xlpe (is:7098) (i)-88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (a) 4 core 16 sq. mm, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed 1.50 sq.mm 3 core round pvc sheathed., providing and erecting pipe type earthing having 150 cms. long and 2.5 cms. dia. galvanised iron pipe with coupling and buch buried in specially prepared earth pit complete with necessary 8 swg earth wire., supplying & erecting earth pit of minimum bore dia. 150mm size approved make earthing electrode consisting pipe-in-pipe technology as per is 3043-1987 made of corrosion free hot dipped g.i. pipes having outer pipe dia of 50mm having 80-200 micron galvanising, inner pipe dia of 25 mm having 200-250 micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover. (approved make oem has to submit test certificate) & having back filling compound of (b) inner chemical (ccm compound)- resistivity:- 0.2 / meter testing as per iec 62561-2017, voltage drop:- 1 volt at no load & dry form, sulphar content:- 2%(c) back fill compound :- earthing compound should be capable to retain moisture for long time necessary test report must be submitted. (b) for electrical installation up to 11kv in normal soil length of pipe - 2.00 mtrs back filling compound - 1 nos bag of 25 kg., making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground., making trench in hard murrum / tar road of suitable width of 90 cm or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground., providing & laying approved make isi marked hdpe 6kg / cm2 (class-3) as per is:4984:1995 pe-80 to be erected at road crossing on or floor as directed for laying of cable. the pipes as follow

Central Government/Public Sector

CTN :40503496

14 Jul, 2025 NA

Kanakapura - Karnataka

Tender For corrigendum : supply of ferritic steel sheet 5x1250 x 3000 mm., as per drawing: rdso spec no.c-k201, gr ade x2crni12 (409m) table 1&2. heat treatment condition 2d as per table-5., packing instruc tion: stainless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic st eel) coils. the coil shall be protected in reasonably good condition to withstand nor mal handling hazard during transit with the following provision as the barest minimu m: i) coil should be wrapped with a layer of water proof paper through out whole leng th. ii) coil should be wrapped with a layer of biodegradeable sheet. iii) outer & inner of coil should be wrapped with gi sheet. iv) side of the coil should be covered with card b oard sheet. v) after this whole coil should be wrapped with biodegradeable plastic sh eet of suitable thickness. vi) the inner edge of the coil should be protected by gi ring f ollowed by another iron ring. vii) outer edge of the coil should be wrapped with gi rin g. viii) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. ix) whole coil shoul d be mounted on wooden blocks for easy lifting/stacking. x) the sheets in coil form fo r thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 100 0-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2 mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 tonnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) the sheet s/plates shall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate s hall be seprated with a layer of water proof paper, after this the whole bundle shoul d be wrapped with double layer of water proof paper and a biodegradeable plastic she et of suitable thickness. a metal protection in edges should also be provided. ii) all bu ndles shall have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling. mechanical damange & corrosion during transit if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40867403

14 Jul, 2025 NA

Kanakapura - Karnataka

Tender For supply of ferritic steel coil 1x1250mm., as per drawing: rdso spec. no. c-k201, grade x2c rni12 (409m) table 1&2, heat treatment condition 2b as per table-5., packing instruction: sta inless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic steel) coi ls. the coil shall be protected in reasonably good condition to withstand normal han dling hazard during transit with the following provision as the barest minimum: i) coil should be wrapped with a layer of water proof paper through out whole length. ii) coi l should be wrapped with a layer of biodegradeable sheet. iii) outer & inner of coil sho uld be wrapped with gi sheet. iv) side of the coil should be covered with card board sh eet. v) after this whole coil should be wrapped with biodegradeable plastic sheet of s uitable thickness. vi) the inner edge of the coil should be protected by gi ring followe d by another iron ring. vii) outer edge of the coil should be wrapped with gi ring. viii) c oil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. ix) whole coil should be mou nted on wooden blocks for easy lifting/stacking. x) the sheets in coil form for thickne ss 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 1000-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 to nnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) the sheets/plates s hall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate shall be se prated with a layer of water proof paper, after this the whole bundle should be wrapp ed with double layer of water proof paper and a biodegradeable plastic sheet of suita ble thickness. a metal protection in edges should also be provided. ii) all bundles shal l have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every addi tional meter. the bundles shall also be provided with skid (wooden packing under neat h) to facilitate handling. mechanical damange & corrosion during transit if any shall b e at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

CTN :40812313

21 Jul, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of cap , tappet top stop , screw , hexagon head cap , screw , banjo connector , screw , injector stop , screw , hexagon head cap , oil level indicator , screw hexagon head cap , union , male , gasket , elbow , male union , screw , hexagon head cap , seal o ring , bushing , o ring , clamp bolt , gasket fuel filter , clamp , t bolt , cap , fuel pump filter , hub jaw coupling , hose , plain , gasket , water header co , bearing ball , bushing , sleeve , link injector , gasket , wtr trf connection , belt , v , key , offset woodruff , spacer bearing , hose , flexible , harness , wiring , socket , cam follower , gasket connection , gasket connection , valve springs , ring , retaining , screw , hexagon head cap , plug , expansion , stop , thottle lever , cup injector , bushing , rod , detent , hose plain , seal o ring , key camshaft , core , aftercooler , screw twelve point cap , cover , fuel pump front , hose , hump , tee male union , screw , hex flange head cap , pump gear fuel , spring , injector , spring , injector , cap screw , washer spring , plug , injector orifice , plug , injector orifice , plug , injector orifice , injector , cover fuel pump , insert valve , resistor corrosion , gasket , gear cover , gasket turbocharger , gear & shaft , shaft idler , belt , v , separator , fuel water , valve , fuel flow , kit barrel plunger & injector , gasket set , fuel pump , element , fuel filter , connection exhaust outlet , seal tank o ring , kit , hx40 turbo repair , vibration damper , gasket filter , bushing , hose flexible , clamp , tube , set , lower engine gasket , seal kit , element , air cleaner , vacuum indicator , breather , connection exhaust outlet , seal rectangular ring , seal rocker lever cover , washer spring , injector , isolator , noise , gasket int manifold cover , element , air cleaner , sensor , temperature , element fuel filter , kit engine piston , piston ring set , isolator , vibration , pick up magnetic , meter hour , dipstick , gasket cover to housing , gasket water inlet connection , screw , elbow , female union , hose flexible , hose flexible , hose flexible , hose flexible , hose flexible , valve piston cooling , bearing main std set , valve float , relay timer , pack idling spring , shaft rocker lever , screw , hexagon head cap , nut heavy hexagon , screw , drive , lock washer water header cover , washer , lock , plug pipe , plug pipe , lock plate , pump sea water

Smc Meter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations/Associations/Others

State Government

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector