Latest soffit Tenders | Government soffit Tenders

State Government

CTN :41517781

28 Aug, 2025 5.00 Lacs

Baran - Rajasthan

Tender For providing of water items --, faucet spout pvc short body, , faucet spout pvc long body, , faucet spout push cock pvc, , doctor tape (brass) ss/brass, , spout log body(brass) ss/brass, , spout short body(brass) ss/brass, , spout two in one pvc (for european w.c), , brass european wc jet spray, , pillar cock (brass) ss/brass, , pillar cock (for wash basin), , angle valve pvc, , angle wall (brass) ss/brass, , pvc connection pipe (for wash basin), , waste pipe pvc for wash basin, , washer (for pvc connections) pvc, , valve cock set 1/2" (for tanks), , volley cock set 1 (for ducting), , cistern valve set (foot ball), , cistern bowl set (siphon set), , cistern dandy set (siphon), , tank connection set 1" gi, , tank connection set ½" gi, , nipple 1" x3 gi, , nipple ½" x3 gi, , g.i. nipal 1½", , g.i. nipal 1 4"x6", , g.i. nipple 1/2x4", , g.i. nipple 1x4", , pick, , elbow 1" gi, , elbow½" gi, , elbow 1"x½" gi, , cpvc elbow 3/4 inch, , g.i. elbow 1½", , 2" gi elbow for main line, , cvpe elbow 2", , cpvc brass elbow bread %*1/2, , cpvc brass elbow xed 1*1, , etyo 1/2 inch ppr, , alyo 1/2 inch ppr, , cpvc elbow 1% plain, , union i"gi, , union" gi, , 2" gi union for main line, , union 3/4" gi, , union 2 inch ppr, , union 1 inch ppr, , dandelion volley 1" ss/brass, , handle volume 1" (pvc), , handlebar ½" (pvc), , handle weight ½" ss/brass, , bal-vai inch cpvc, , socket!"gi, , socket ½"gi, , socket 1"x½" gi, , 2" gi socket for main line, , 2" pvc socket (for motor), , cpvc shockit 3/4 inch, , # socket 1" xi" cpvc, , soffit 2" xi" cpvc, , socket 2" xi"cpvc, , cpvc socket %*3/4, , cpvc socket 14", , sankit 2 inch ppr, , socket 1 inch ppr, , 5 socket 1/2 inch ppr, , hee " gi, , t 1" gi, , - tee 2"x1" ppr, , t1 ppr, , t2 ppr, , | plug ½" gi, , plug 1" gi, , pipe ½" pvc (10 feet per pipe), , pipe 1" pvc (10 feet), , cpvc pipe 2", , 2" gi pipe for main line (10 feet), , 2" pvc pipe submersible 10 feet (for motor), , pipe 1" ppr, , pvc pipe 160mm(6 inch), , pvc pipe band 160mm, , pvc pipe band 160*45mm, , turing pipe 1", , 1/2" pipe roll, , tank connection set 3/4" gi, , tech connection set 1" gi, , tank connection set 3/4" cpvc, , टकी (1000 letter) 3 layer, , tank (500 letter) 3 layer, , c pvc 2" हेष्टी fta brass or fta, , plastic, , c pvc 2" एम्प टी mta brass or mta plastic, , teplon tape, , c pvc 2" ball wail, , rich pana 14", , rith pana 18, , soul band 118 ml cpvc, , funer double, , cpvc fapt-14, , west coupling 1%, , ewc seat cover, , wash basin 20*16, , brocket angle, , m.a.r.t. 1", , pillar cock(washbasin) polo pvc, , f.t.r.t. 1*1", , gudata 2 inch ppr, , clip nails, , 7 d joint 2", , 8t 2"x1" gi 9 busbar, , pvc pipe 25 mm, , 1 union 3/4" cpvc, , 2 cpvc union, , 3 european seat pichkari. inth, , 4 cpvc union 2" cpvc, , 5 cpvc tank nipple 2", , 5 funner, , pp pipe 2", , 3 water meter 2 inch, , water meter 17 inch, , cistern -l pipe, , doctor tape (washbasin), , sink cauk, , plastic socket 4", , 3 plastic band 4", , pvc brush l pipe, , steel sink waste cupling 4", , saddle piece, , water tank cover 500 ltr., , water tank cover 1000 ltr., , cpve rt 2x1 inch, , r. socket 3x4 inch, , long body tape cpvc, , round body pillar cock, , #name?, , hoj nipple 1x3, , steel body tape, , subtle pieces 1,2,3,inch, , patti clip 3 inch, 4 inch, , cpvc tank connection 1 inch, , cpvc mt 1 inch, , plastic pipe 2.5 inch, , rudisor 1x1 % gi, , rudisor ix ¼ gi, , west latrin box complete, , (sistern box), , gi pipe ½ inch, ½ inch, 1 inch,, , 2 inch, 1 ½ inch, , solvent tube, , dye (bangle inserting machine) (ppr), , ½ inch, 1 inch, ½ inch set, , is! black pipe 1 inch, , cpvc pipe, , ½ inch, ½ inch, i inch, 1%, , inch, 1% inch, 2 inch, , cpvc mt plane, , ½ inch, ½ inch, i inch, 14, , inch, 1 ½ inch, 2 inch, , cpvc mt brass, , ½ inch, % inch, 1 inch, 14 inch, 1½ inch, 2 inch, , cpvc elbow brass, , ½ inch, ½ inch, 1 inch, 14 inch, 1½ inch, 2 inch, , bcpvc plane "t", , ½ inch, ½ inch, 1 inch, 1% inch, 1½ inch, 2 inch, , cpvc socket pin, , ½ inch, ½ inch, 1 inch, 14

State Government

CTN :41504264

30 Aug, 2025 NA

Amreli - Gujarat

Tender For supply of led luminaire for road and street lights (v2) conforming to is 10322 (part 5 / section 3) (q3) , lighting pole or post and hardware - tubular street light poles (v2) (q3)

CTN :41504488

04 Sep, 2025 NA

Kheda - Gujarat

Tender For supply of lighting pole or post and hardware - tubular street light poles (v2) (q3) , led luminaire for road and street lights (v2) conforming to is 10322 (part 5 / section 3) (q3)

State Government

CTN :41512570

02 Sep, 2025 13.89 Lacs

Thiruvananthapuram - Kerala

Tender For supply and erection of galvanized steel tubular poles (8 metre long 540 sp-11 swaged type) on turnkey basis in connection with utility shifting works as part of sreekaryam flyover under electrical section sreekaryam

Central Government/Public Sector

CTN :41487264

09 Sep, 2025 NA

Ratlam - Madhya Pradesh

Tender For tender for supply of sleepwell three layers foam mattress - size 1981 mm x 914 mm brand:sleepwell (detailed description/specification as per gem contract no.gemc-511687782619356) , metal bed, made of tubular steel ss 304 rectangular/sqaure section, size l 1900 mm (+10mm) x w 900 mm (+10mm), structure of metal bed frame including legs and head structure ss 304 pipe, thickness of hallow section in structure 1.3, material of mattress panel plywood sheet/ss pipe, thickness of mattress panel = 1.2 mm, height of bed 450 mm, paint/finish of ms parts powder coating finish of head board powder coating, min powder/paint coating thickness (micron) = 60 micron,, computer table size of computer cum printer table ?10 mm (lxbxh) 1200 mm x 750 mm x 750 mm, cots iron metal beds (without mattress) with frame of ms hollow rectangular/square section size l 1900 mm (+10mm) x w 900 mm (+10mm), structure of metal bed frame including legs and head structure ss 304 pipe, thickness of hollow section in structure 1.3, material of mattress panel plywood sheet/ ss pipe, thickness of mattress panel= 1.2 mm, height of bed = 450 mm. paint/finish of ms parts powder coating, finish of head board powder coating, min powder/paint coating thickness (micron) 60 micron,, storage cabinate made of 18 mm partical board with single drawer unit with 10 mm top glass thickness with printer & ups arrangement size - w 437 x d 187 χ η 26? make abm

Central Government/Public Sector

CTN :41489177

08 Sep, 2025 1.76 Crore

Bhubaneswar - Odisha

Tender For providing and fixing of pedestrian guardrail of tubular steel railing on selected stretch of puintola bhubaneswar section of nh 16 from km 284.000 to km 414.000 in the state of odisha

State Government

CTN :41348482

22 Aug, 2025 24.86 Lacs

Jaipur - Rajasthan

Tender For corrigendum : procurement of various consumables and spares of ohe installation. - 9 tonne adjuster (double eye type), r.i no. 5020, anchor double strap assembly complete with fasteners, r.i no. 5030, guy rod double strap assembly complete with (100)fasteners small, r.i no. 5220-1, guy rod double strap assembly complete(150/250) with fasteners big, r.i no. 5220-2, 18mm single clevis(forged) assembly complete with fasteners, r.i no. 5041-1, mast anchor fittings (welded) with fasteners, r.i. no. 3231, mast guy rod fittings (welded) with fasteners, r.i. no. 3232, compensating plate, r.i. no. 5191, equalizing plate, r.i. no. - 5192, bimetallic parallel clamp (10/20) with fasteners, r.i. no. 1540, mast bracket fitting assembly (200 ) with fasteners, r.i. no. 3070-2, mast fitting for hook insulator, r.i. no 3021-1, tubular stay adjuster (12 hole), r.i. no 2402, tubular stay adjuster (16 hole), r.i. no 2402-1, tubular stay sleeve (forged) with stud bolt & lock nut, r.i. no 2403-2, standard antiwind clamp complete with fastener, r.i. no 2550-2, antiwind clamp for tramway ohe (reg.)complete with fasteners, r.i. no 2550-3, standard catenary direct clamp with fasteners, r.i. no 2120, thimble (10 mm) , r.i. no 1351, arching horn of 25kv manual isolator (1250a), end fitting with wedge (for s.s.wire rope) , r.i. no 5321, 5341, standard backing angle (8x8), r.i. no 3076-2, standard backing angle (200), r.i. no 3076-2, ratchet lever hoist (pull lift) (0.8 t), ratchet lever hoist (pull lift) (1.6 t), gearless hand operated pulling and lifting machine(0.8t), gearless hand operated pulling and lifting machine(1.6t), gearless hand operated pulling and lifting machine(3.2t), 25kv post insulator-porcelain, r.i. no 6090, light weight section insulators assembly, r.i. no jg-2202, adjusting jig si jg2202, r.i. no jg2233, aluminum lug- 70sqmm, aluminum lug- 95sqmm, aluminum lug- 240sqmm

State Government

CTN :41374654

29 Aug, 2025 4.47 Lacs

Kolkata - West Bengal

Tender For urgent repair and maintenance of existing false ceiling and roof slab soffit at rented premises of kolkata zonal office, 19 a british india street, kol-69

CTN :41346648

26 Aug, 2025 NA

Kamrup - Assam

Tender For supply of lv7 tmb 2636 1540 4911 rotor assy , lv7 tmb 0433 271 046 nozzle injection , lv7 tmb 2525 2010 0117 water pump assy , lv7 tmb 2920 000135 armature , lv8 pinaka lcr z 9372010184 repair kit compr items marked with , lv7 tmb 3501 1417 190 double ended tubular box spanner 17x19 i , lv7 t 815 297 255 017 4 rear mudguard , lv7 t 815 130 100 102 900 ball joint , lv7 t 815 207 869 124 4 section upper , lv7 t 815 993 200 688 0 relative valve

CTN :41303762

23 Aug, 2025 46.87 Lacs

Delhi - Delhi

Tender For tender for supply of wooden furnishing items at bungalow 20 akbar road c c - providing making and placing in position ss center table of required size , as per approved design the table frame fully shall be made up of stainless steel tubular section with approved powder coating of approved shade 1065x610x760mm ht , providing making and placing in position ss center table of required size as per approved design the table frame fully shall be made up of stainless steel tubular section with approved powder coating of approved shade 1220x610x760mm ht , providing making and placing in position ss side table of size approx 300mm dia and 450mm ht as per approved design the table frame fully shall be made up of stainless steel tubular section with approved powder coating of approved shade and texture fixing 8mm thick black brown glass on the top of the table with required shape and size the cost including all necessary powder coating welding , buffing etc all complete as per direction of the engineer in charge , providing making and placing in position wooden dining chair of size approx 610x580x1010mm ht as per approved design the chair arm side frame front frame headrest front leg back leg back frame , shall be made up of first class teak wood with required size and section finally seat and back shall be upholstered finished stitching with approved shade fabric with help of required 12mm 25mm 50mm thick pu foam of make sleepwell or equivalent elastic niwar casement fibre pad etc , providing making and placing in position wooden sofa two seater as per approved design the inner frame shall be of seasoned and chemically treated marandi wood and legs with first class teak wood finished the sofa legs round with 75mm x 75mm section side frame with 75mm x 35mm section arms with 100mm x 150mm section back vertical -sofa two seater , providing making and placing in position wooden sofa two seater as per approved design the inner frame shall be of seasoned and chemically treated marandi wood and legs with first class teak wood finished the sofa legs round with 75mm x 75mm section side frame with 75mm x 35mm section arms with 100mm x 150mm section back vertical side with 160mm x 40mm section back bottom - sofa three seater , providing making and placing in position wooden chair as per approved design sample the chair legs support , bracket shall be consisting of first class teak wood with required size and section seat frame of the chair shall be made up of 19mm 19mm thick commercial ply of make duro green or equivalent seat and arm frame of chair made up with 12mm thick flexible ply as per required pattern , providing making and placing in position wooden vanity counter of size approx 1620x580x500mm ht as per approved design the vanity top bottom side shutter partition skirting shall be made up of 18mm thick hdhmr ply of action tesa or equivalent make finished with 1mm laminate on inner side and unit back shall be consisting , providing making and placing in position ss dining chair of size approx 610x580x1010mm ht as per approved design the chair side frame front frame headrest front leg back leg back frame shall be made up of stainless steel round square tubular section finally seat and back shall be upholstered , providing making and placing in position wooden palmet of size approx 240mm depth and 220mm front face width as per approved design , the palmet top front sides shall be made up of 18mm thick hdhmr ply om action tesa or equivalent make finally finish all the wooden area with high quality high gloss polish of sirca or equivalent make , manufacturing and placing of sofa two seater the inner frame shall be of seasoned and chemically treated marandi wood finished backrest top with 100mm x 70mm wooden section round corner top with 150mm x 70mm wooden section side vertical support with 70mm x 30mm section backrest vertical frame with 70mm x 30mm section backrest bottom vertical support with 70mm x 30mm section seat frame with 70mm x 30mm

Soffit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government