Latest solid block Tenders | Government solid block Tenders

CTN :43528792

21 Jan, 2026 NA

Multi City - Multi State

Tender For supply of ismb 150mm x 75mm x 5.80 mtr or beam,ismb 150mm x 75mm x 3.50 mtr long for beam,ismc 75x40, 3.5 m long welded with plate 250x250x6mm on one side with holes drilled,srt 1630 x 613 x 180mm made out of 2 mm thick hot rolled carbon steel sheet,steel roofing trough srt of size 1700 x 613 x 180mm made out of 2 mm thick hot rolled carbon steel sheet,srt of size 1270 x 613 x 180mm made out of 2 mm thick hot rolled carbon steel sheet,pbs roll self finished tarfelt hessian base for water proofing grade 1,hdpe sheet 400 micron,hdpe sand bag of size 75x40 cm sand colour and each bag having weight not less than 60 gms,load bearing concrete pcc solid blocks of size 400mm x 200mm x 200mm using plain cement concrete,pre prefabricated steel door confirming to is 1038-1983 reaffirmed 2001 of size 900mm x1800mm. the door chowkhat frame made angle iron 50mm x 50mm x 6mm with 03 nos,ms hexagonal nuts. bolts and washer 12 mm dia 40 mm long,plywood 8 feet x 4 feet x 12mm thick,cgi sheet 810 x 1830 mm long, 0.63mm thick,red oxide pr

CTN :43529555

20 Jan, 2026 NA

Multi City - Multi State

Tender For supply of hesco basket,hesco basket of size 1.22mm length,hesco basket of size 1.22mm length 0.61mm width,hesco basket of size 1.22mm length 0.61mm width x 0.61mm height,hesco basket of size 1.22mm length 0.61mm width x 0.61mm height of product code mil2 2424 or equivalent,pcc solid blocks 400 mm x 200 mm x 200 mm minimum strength 50kg sqcm

CTN :43529667

20 Jan, 2026 NA

Multi City - Multi State

Tender For supply of dettol hand wash,dusting cloth,harpic 500ml,soft broom,colin 500 ml,room freshner,wiper with rod,toilet brush,mopper,phenyl 1 ltr,acid for toilet cleaning 1ltr,steel wool,solid block air freshner odonil,automatic spray refill airwick,automatic spray refill aergodrej,allout

CTN :43390540

15 Jan, 2026 10.65 Lacs

Kollam - Kerala

Tender For demolition existing rcc drain, earth work excavation , bailing of water, soling, pcc works, rcc works centering and shuttering, steel reinforcement work, solid block masonry, back filling, filling contractors earth

State Government

CTN :43525648

20 Jan, 2026 44.19 Lacs

Pondicherry - Pondicherry

Tender For providing cast-in-situ type rcc solid block lane divider thengaithittu main road and improvements to road cross culvert in port road, point care street, thennan salai road, puducherry

State Government

CTN :43483084

16 Jan, 2026 10.12 Lacs

Kollam - Kerala

Tender For the provisions given in the estimate are site levelling, earth filling inside basement,pcc for flooring, provisions for ramp, solid block masonry for roof top parapet wall, steel framework for windows, door frames, plastering

State Government

CTN :43467490

13 Jan, 2026 NA

Delhi - Delhi

Tender For s/i/t/c of e/m equipments and allied works for newly re-bored tube well at okhla vihar near majar in okhla constituency ac-54. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 15 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point: 200-125-75 lpm on 89-124-133 mtr. head.having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved. , supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted. a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no. b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 no c) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no. e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable banking g) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos.complete wiring &installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated and pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs. make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., supply of ms nut bolts off size as per requirement., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 1x1 made out from 6mm thick m.s. sheet in 2 halves and a circular hole in centre 3-1/2 dia. with locking arrangement by nuts and bolt. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

CTN :43502704

23 Jan, 2026 NA

Kupwara - Jammu And Kashmir

Tender For supply of m sand confirming to is 383-2016 specification for coarse and fine aggregates free fromadherent as per tech att , aggregate 20mm stone aggregate to be crushed rock or gravel 20mm graded confirming to relevant is and as per tech spec , aggregate 40mm stone aggregate to be crushed rock or gravel 40mm graded confirming to relevant is and as per tech spec , quick setting compound conforming to is 1344-2018 make acclerex or cico or fosroc or rapidite , pcc solid block of size 400mmx200mmxz200mm type c1 1 3 6 using 20 mm graded aggregate , freshly burnt fat lime class c white in colour , cement base paint make snowcem or supercem , ms binding wire 0.9mm as per tech spec , aluminium section 10mm gauge of size 3inchx2inch x15 ft as per is pec and duly fabricated as per directions of engineer in charge , aluminium angle of size 25mmx38mm of 10mm gauge as per is pec and duly fabricated as per directions of engineer in charge , tapping screw 38mm of each box having 100 nos screw as per is specification and as per approved make , tapping screw 25mm of each box having 100 nos screw as per is specification and as per approved make , roller wheel of size 25mm as per sample approved , roller wheel of size 50mm as per sample approved , aluminium mesh duly fabricated as per directions of engineer in charge of size 3 ft and as per tech speecification attached , cable 2.5 sqmm 3 core copper as per tech specification attached , cable 1.5 sqmm 2 core copper as per tech specification attached ) /bid number : gem/2026/b/7087675 * /dated: 08-01-2026 & & / bid document 1 / 22

CTN :43502674

19 Jan, 2026 NA

Kota - Rajasthan

Tender For supply of provision of constr mtrls for 500 sqm hard standing d d -portland cement grade 43 is 12269 to 1990 packed in 50 kg hdpe bags conf to isi 1625 or 2000 , course sand , 20mm stone aggregates , 40mm stone aggregates , hardcore 63mm stone aggregates , pcc solid block 400 into 200 into 200 mm confirioming to is 2185 , kota stone 600mm into 600mm , interlocking cement concretye blocks of grade m35 of size 230 into 115 into 60mm , ply wood 12mm of size 8 feet into 4 feet , wooden runners 2 inch into 2 inch , nails size of 2 inch or 3 inch

CTN :43460030

13 Jan, 2026 NA

Villupuram - Tamil Nadu

Tender For purchase of m-sand, jelly and solid block

Solid Block Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government