Latest speedo meter scrap Tenders | Government speedo meter scrap Tenders

corporations/Associations/Others

CTN :39414588

01 Mar, 2025 2.30 Lacs

Kolkata - West Bengal

Tender For installation of dewatering pump into the inlet valve chamber with electrical operating control system at senpally bps.

State Government

CTN :39423943

07 Mar, 2025 45.55 Lacs

Amritsar - Punjab

Tender For prov. house for existing pipe line and new pipe line pvc pipe specials for distribution system sluice valve chamber chlorinator replacement of control panel repair of pump chamber and ohsr and development of water works etc complete in all respect

CTN :39303658

24 Feb, 2025 NA

Karwar - Karnataka

Tender For corrigendum : undertaking rrc for diesel generators-prime mover m/s man make onboard kalvari class submarines for a period of one year - 3000 hourly routines., inspect the starting aid device and its injections as per jicbd01-i-045, inspect the pinion shaft clearance and the impeller condition of the motor charge air compressor as per jic bd-01-i-074.s., run the electronic over speed as per jic bd-0 1-1-083, check the calibration, the atomization and the tightness of the injectors as per jic bd-01-i-015., 5500 hourly routines., visually inspect the timing gear as per jic bd-01-1-037., 6000 hourly routines., check the engine controller connections as per jic bd-01-o029., inspect the starting air valves as per jic bd-01 l-007, inspect the decompression valves as per jic bd-01 l-008, carry out an endoscopic inspection of liners, piston heads and pre combustion chamber nozzles as per jic 80-01-1018., visually inspect the cams as per jic bd-01-l-035., visually inspect the inlet and exhaust lappet rollers as per jic bd-01-l-036., inspect the air distributor disk as per jic 01-l-046, drain the otter of the air distributor as per jic bd-01-l-047, inspect the main starting valve as per bd-01-l-048, clean the oil cooler as per bd-01-l-049, clean the fuel cooler as per jic bd-01-i-050., clean the air coolers as per jic bd-01-i-076., inspect the hydraulic clutch gears of the motor charge air compressor as per bd-01-l-077, inspect the thrust clearance of the turbocharger as per jic bd-01-l-078., inspect and calibrate the control and safety instrumentation., inspect the over speed safety slide valve and replace the o-rings as per jic bd-01-l-085, inspect the over speed solenoid valve as per jic bd-01-l086, adjust the tappet clearance on cold engine as per jic bd01-o-021, mandays rates, mechanical superintendent engineer @ /day/person inclusive of (lodging & boarding, local conveyance (to & fro) per trip., control superintendent engineer @ /day/person inclusive of (lodging & boarding, local conveyance (to & fro) per trip., skilled technician @ /day/person inclusive of (lodging & boarding, local conveyance (to & fro) per trip., semi - skilled technician @ /day/person inclusive of (lodging & boarding, local conveyance (to & fro) per trip., overtime charges., mechanical superintendent engineer / hour, control superintendent engineer / hour, skilled technician / hour, semi - skilled technician / hour, travelling charges to and fro karwar., mechanical / control superintendent engineer per trip/ per person, skilled technician per trip/ per person, semi - skilled technician per trip/ per person

CTN :39389727

12 Mar, 2025 2.00 Lacs

Agartala - Tripura

Tender For supply of laboratory and scientific equipment - repair of thermal evaporator system, qsv 4 butterfly valve (details as per sl no 1 at annexure-a)., qsv 1 butterfly valve (details as per sl no 2 at annexure-a)., variac : required for controlling (increasing & decreasing) the voltage of the power from lt & ht transformer (details as per sl no 3 at annexure-a)., ht board : required for operating the discharge current for ion cleaning of the substrate by ion bombardment gadget. (details as per sl no 4 at annexure-a)., replacement of o rings : set of neoprene o rings required for the valves, chamber gadgetry, kf clamps, dp, lnt & collar. (details as per sl no 5 at annexure-a)., needle valve : manually operated fine control needle valve provided for controlled admittance for inert gas into the chamber (details as per sl no 6 at annexure-a)., quartz tube adopter : ss adopter for fixing on both sides of the quartz tube with provision for fixing valve, pressure gauges and pipeline to vacuum pump. (details as per sl no 7 at annexure-a., to pu 10 ball valve (details as per sl no 8 at annexure-a)., servicing of rotary pump (details as per sl no 9 at annexure-a)., servicing of pirani and penning gauges. (details as per sl no 10 at annexure-a)., servicing charges of the coating unit (details as per sl no 11 at annexure-a).

Central Government/Public Sector

CTN :39298120

21 Feb, 2025 NA

Ernakulam - Kerala

Tender For tender for supply of blastline single chamber blast machine - bl tv valve complete for single chamber blast machine model bli 500a , control knob tv 91000005 for bl tv valve of single chamber blast machine model bli 500a , cap tv 91000002 for bl tv valve of single chamberblast machine model bli 500a , piston seal tv 91000008 for bl tv valve of singlechamber blast machine model bli 500a , piston tv 91000009 for bl tv valve of single chamber blast machine model bli 500a , tungsten carbide plunger tv 91000010 for bl tv valve of single chamber blast machine model bli 500a , o ring tv 91000013 for bl tv valve of single chamber blast machine model bli 500a , tungsten carbide sleeve tv 91000014 for bl tv valve of single chamber blast machine model bli 500a , plunger seal tv 91000012 for bl tv valve of single chamber blast machine model bli 500a , urethane sleeve tv 91000016 for bl tv valve of single chamber blast machine model bli 500a , brush o ring tv 91000018 for bl tv valve of single chamber blast machine model bli 500a

Central Government/Public Sector

CTN :39357358

25 Feb, 2025 87.86 Lacs

Anuppur - Madhya Pradesh

Tender For supply of mine line make spares for different equipments - cover bolts , isolator assembly k3 on off , isolatorassembly k4 on off 300a , mounting bar for isolator , coilspring for isolator up to 400a , isolator micro switch assly ,catcher assembly , arc chutes , ammeter100 5 for acb ,ammeter 200 5 for acb , ammeter 300 5 for acb ,ammeter 400 5 for acb , push button actuator for el test ,push button actuator for el reset , potential transformer ,incoming gland , outgoing gland , glass fuse with holder ,power cable for 300a for breaker chamber ic og set ,power cable for 400a for breaker chamber ic og set ,power cable for 200a for breaker chamber ic og set , limitswitch 2no 2nc for breaker , brass terminal , push buttonwith spindle , brass terminal for cp , earth leakage relay50 750m a with time lag with cbct , moving contract forisolator , overload assembly breaker 30a 100a , overloadassembly breaker 110a 200a , overload coil 200 a , movingcontact for breaker upto 200 amps , moving contact forbreaker 400 amps , shunt trip assly complete. , no volt coilassy. under voltage coil assy. without moulding , no voltcoil assy. under voltage coil assy. with moulding , currenttransformer for ammeter , busbar , indicating lamps ,moving contact finger 400a , fixed contact assy. forbreaker , operating handle for isolator , terminal bushingwith insulator dmc incoming 6mm 20mm , terminal bushingwith insulator dmc incoming 8mm 20mm , fixed contactassy. for isolator 400a , overload assembly breaker 310a400a , arc chutes pillar , fixed contact breaker , potentialtransformer 80v , overload assembly breaker 210a-300a ,limit switch no nc for breaker , on off isolator 300a ,rectifier , ht bushing with stud. 3.3kv , reveering isolator3.3kv , ht rec pt fuse , p fuse plate wiring ass. , ht fusesupport base eppxy cast , aux. transformor single phase , support base eppxy cast , aux. transformor single phase , voltmeter selector switch , potential transformor ,isolator handle , off delay timer , incoming throughgoing sealing box with cone and gland assy , outgoingterminal swaling box with cine gland 3 way , copperterminals with dmc bushing , brass terminal with dmcbushing , brass terminal with nylon bushing , isolatorhandle , on off isolator 100a , glass fuse with holder , noactuator , nc actuator , relay coil voltage 2co contact ,pot. transformer , push button with spindle , actuator nonc , hrc fuse 16a , hrc fuse 63a , sensitive earthleakage relay 50 300ma with variable time lag , indicatingled , body bolt , ammmeter , core blancetransformer , thermal overloderelay with block , isolatork3 on off , thermal ol relay ctr 50 5 range 20a 50a ,ammeter 120 5 for lt starter , on delay timer , potentialtransforiner , aux, contactor220v ac , glass fuse withholder , potential transformer 80 va , sensitive earthleakage relay 50 300ma with variable time lag with controltransformer and suitable cbct , pilot relay , brassterminal with dmc bushing , brass stud with dmcbushing for og , hrc power fuse , isolator handle ,thermal o l relay ctr 120 5 range 48a 120a , off delaytimer , aux. relay 220v ac coll 3co base , multi pilot relay12.5 dc , single phasing preventer current operated ,single pole two way toggle switch , actuator no , actuatornc , push button element , isolator on oft rov 300aa ,isolator 3p on off 100a , indicating lamp , potentialtransformer , ht bushing , control relay 110v , dcpower pack , hcr ht pt fuse 3.3kv , pct transformer, aux contractor , natutral earthing resistor , vcbclosing coil , vcb shunt trip coil , vacuuminterrupter , neutral monitoring relay withresistance , earth leakage 5 750 ma and 750 ma 2 a dualsetting with time lag with cbct , 3 pole oil dashpot relay300 5 , dc power pack , vcb limit sweitch , hv bushuing ,isolator , current transformer , vcb shunt trip coil , controlrelay , capictor trip device , vaccum circuit breaker , pottransformer 500va , indicating lamp , contrtol fuse , undervoltage r...

CTN :39261023

24 Mar, 2025 NA

Mumbai - Maharashtra

Tender For design, support, supply, installation and commissioning, training, warranty and annual maintenance contract of medical cyclotron with turnkey (complete scope as per the attached document in specification) - [equipment -medical cyclotron system] medical cyclotron- bunker type, unshielded with 4 numbers niobium liquid target for 18f production (self shielded), 2 numbers niobium liquid target for 68ga production (unshielded or self shielded), 1 number solid target ( for production of 64cu,89zr, 68ga) (unshielded or self shielded) along with necessary operator and personnel safety interlock system, [equipment -medical cyclotron system] 18f based synthesis modulefully automated cassette-based synthesis module with suitable dual vertical hotcell or equvivalent to handle 20 ci of f18 radioactivity (each working chamber) for routine production of 18f based radiopharmaceuticals., [equipment -medical cyclotron system] synthesis research modulegeneral purpose 18f radiofluorination module with suitable dual vertical or equvivalent hot cell, [equipment -medical cyclotron system] solid target irradiation, processing and synthesis systemsolid target processing system with electroplating+recovery of enriched target+purification) automated module for synthesis of radiopharmaceuticals of zr89,64cu, with suitable hot cell (100 mm lead thickness) [separate prices to be provided for hotcell with camera and hotcell with pb glass window for the working chambers of the hotcells], [equipment -medical cyclotron system] fully automatic dispenser (18f)fully automatic dispenser for vial dispensing with suitable hot cell to handle 20 ci of f18 radioactivity, [equipment -medical cyclotron system] dispenser for solid target-based rpone dispenser for solid target-based radio-pharmaceuticals with suitable hot cell to handle minimum of 5 ci of activity., [equipment -medical cyclotron system] 68ga based synthesis module fully automated synthesis module for radio labelling of 68ga produced from cyclotron with suitable dual vertical hot cell or equvivalent [separate prices to be provided with camera and with pb glass window for the working chambers of the hotcells], [quality control system ] hplchplc with autosampler, [quality control system] gas chromatographygas chromatography with fid and autosampler, [quality control system]tlc scanner, [quality control system] ph reader, [quality control system] mca solid state based mca, [quality control system] dose calibratordose calibrator for qc, lead shielding, [quality control system] bet systemendotoxin test system for quality control, [quality control system]bod incubator, [quality control system] l-bench l-bench for target maintainance, [quality control system] l-bench (qc)l-bench for qc of pet radioharmaceutical, [quality control system]laminar flow benches, [radiation monitoring equipment] central radiation monitoring systemsystem includes software for online data acquisition and backup for six months., [radiation monitoring equipment] gamma area monitor gamma area monitor (0-100mr/h), [radiation monitoring equipment] remote probehigh range gamma monitor with remote probe, [radiation monitoring equipment] stack monitoring systemnai detector for on line stack monitoring systemlead castle for stack monitoring probeintegrated radiation monitoring computer system with complete cabling up to the top floor of building.stack monitoring channel local alarm unitssoftware system for stack monitoringmonitor channel connection kitspare parts kit for stack monitor, stacking monitor channels, area monitors, [radiation monitoring equipment]hand & foot monitor, [radiation monitoring equipment] personal pocket dosimeters (digital), [radiation monitoring equipment] portable gamma dose rateportable gamma dose rate meter + contamination probe, [radiation monitoring equipment] portable survey monitor for neutron, [radiation monitoring equipment] remote probe survey neutron monitor (high range), [radiation monitoring equipment] por

CTN :39172023

21 Feb, 2025 NA

Khandwa - Madhya Pradesh

Tender For supply and installation of miscellaneous items - led notice display board height (min)(mm)-609.6, length(min)(mm)-1920, led pitch (max) (mm)-10, led display board type-single,led colour-red,led type-smd,language-english; regional,unicode support-utf-8,number of display lines]-2,type of displayed infornation-static + scrolling both,viewing angle-horizontal 160 deg or higher & vertical 130 deg or higher,viewing distance (meter)-15,automatic brightness control-yes,led brightness(cd/m2)--4001-5000,pixel pitch (mm)-10,minimum pixel density (dots/meter2)-5000,maintenance-rear,duty cycle-16x 7,life span (hours)-50000,construction-display system,it is consisting of led display board + embedded controller,cabinet-steel/alluminium box duly powder coated,type of installation-outdoor,wi fi connectivity-yes, if yes, type of wi fi connectivity,802.11 b/g/n,usb port-1,gsm connectivity-yes, if yes, cellular data support-4g/lte,input voltage (vac)-110-240,maximum power consumption (watt)-300,weight (kg)-50,on site oem warranty (year)-1, pa- audio sound system with trolly :- system type-1 way,built in uhf receiver-no,number of wireless microphones-2,bluetooth connectivity-avalilable,built in memory (gb)-0,number of channels-1,warranty (years)-1, sanitary napkins vending machine :- type of machine-automatic,operating features-coin operated/free,multiple coins accepted-yes,number of selection options-2,accessibility for free vending utility service-na,type of loading-spiral,maximum storage capacity (nos)(nos)-25-50,material of the outer body-mild steel(ms),built-in charger-no,mode of function-stand alone,operating power source-electronic,battery backup time (hrs)-na,thickness of ss/ms sheet (mm)-1.2,thickness of frp/plastic sheet (mm)-1.2, sanitary napkins incinetator machine with smoke control unit :- stand provided-yes, thickness of thermal insulation material (mm)-40 millimeter, thickness of ms/ss sheet of burning chamber (internal) (mm) (min)-3 millimeter, machine weight(kg)-51-250, thickness of door including insulation (mm)-40 millimeter, flexible emission outlet pipe dia (mm)-76 millimeter, material of housing cabinet (external)-mild steel(crca) sheet, material of burning chamber (internal)-stainless steel sheet of ss-304 grade, material of thermal insulation-high density ceramic board, temperature indicator provided-yes, minimum burning temperature (degree c)-800, burning capacity per day (number of napkins)-1000-1250, burning capacity at a time (number of napkins)-26-50, burning time of full capacity napkins/pads (minutes) (max)-35 minutes, automatic digital controller for time-yes, automatic digital controller for temperature-yes, type of scu (smoke control unit)-top mounted, material of housing of smoke control unit (scu)-mild steel(crca) cabinet, both carbon control and foul odour control chambers for filteration of smoke emission-yes, number of filters in carbon control chamber-one, type of filters in carbon control chamber-ceramic blanket as a filter, number of filters in odour control chamber-one, blower rpm-1800, warranty in years (option of comprehensive warranty is available through bidding only, which if opted will supersede normal warranty in the catalogue)-1, wall mounted automatic fire extinguisher:- extinguishing media-powder based (as per is 4308), expellant medium-n2 based, extinguishing agent of powder based fire extinguisher-abc map90, discharge mechanism-automatic, additional requirement (hint: select na if not applicable)-na, cylinder/vessel material-mild steel, valve material-stainless steel, internal coating-epoxy powder coating, external coating-epoxy polyester powder, powder based fire extinguisher capacity (in kg) (hint: select na if extinguishing media is not powder based)-6,7,8&9, clean agent based fire extinguisher capacity (in kg) (hint: select na if extinguishing media is not clean agent)-na, fitted with heat sensor quartzoid bulbs with sprinkler heads-2, class of fire for which fire extinguisher is

CTN :39228472

27 Feb, 2025 1.06 Crore

Nagaon - Assam

Tender For corrigendum : construction of underground pvc distribution system spout chamber boundary fencing sign board boring installation of tw installation commissioning solar pv module including mounting structures construction of control room

CTN :39228474

27 Feb, 2025 1.06 Crore

Nagaon - Assam

Tender For corrigendum : construction of underground pvc distribution system spout chamber boundary fencing sign board boring installation of tw installation commissioning solar pv module including mounting structures construction of control room

Speedo Meter Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector