Latest spindle valve Tenders | Government spindle valve Tenders

State Government

CTN :40071835

19 May, 2025 NA

Birbhum - West Bengal

Tender For providing and installation of electro-mechanical accessories at cwr site and allieds works at ekpara pwss, block-rampurhat-i under bolpur mechanical division - supply and delivery of openwell submersible pumping machinery set suitable for wet pit installation complete with stainer along with all accessories with following specification: pump : discharge (q) : (1800-1280) m3/hr. & head (h) : (19-38) mtrs.method of starting : sd, shaft-stainless steel-ss-304, impeller- crome steel/ci/s.s / bronze, suc & del size- 90/80 mm dia, type of position-horizontal. mechanical sealmotor : 12.5hp (suitable for open well)operating voltage : 415 ( 10 %), phase : 3ph, 50 hz 6%speed : 2800 rpm, method of starting : s/dmake : ksb / grundfos / texmo / cri / kbl / mbh / or any approved vendor. ( n.b : manufacturers test certificate along with charecteristics curve, moc and gurantee certyificate have to be submitted at the time of delivery.), supply & delivery at site of 35 mm x 3.5 core size aluminum armored, xlpe insulated 1.1 k.v. grade cable, conforming to is 7098(i) as per direction of eic.(make:- gloster / polycab / mescab / or any approved vendor list of phed.) ( n.b : manufacturers test certificate have to be submitted at the time of delivery.), supply & delivery of 100a kit-kat rewireable (porcelain fuse carrier & base) (make:- havells / l&t / or any approved vendor list of phed.), supply & delivery of 100 amps re-wireable porcelain fuse unit type tpn main switch with steel sheet enclosure (conforms: is/iec600947-1&3). (make: havells /approved vendor list of phed.), supply & delivery of re-wireable type tpn changeover switch 100 amps 415v, 50hz, 4 pole offload with steel sheet enclosure (conforms: is/iec60947-1&3). (make: havells /approved vendor list of phed.), 100 amps, 4way, wall mounted copper busbar chamber with steel sheet enclosure (conforms:is/iec:60947-3). (make: havells /approved vendor list of phed.), supply and delivery of the following pipes, valves, pipes and gauges etc at site-- (make: approved vendor list of phed.), 100mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 150mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 100mm dia m.s. blank flange 15mm thick perforated as per is1538., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 100mm dia. cast iron double flanged manually operated rising spindle type sluice valve generally conforming to is: 14846, having body, door, dome / bonnet, gland in graded cast iron to is 210 gr. fg 260, four faces of ss aisi 304 and spindle nut of gunmetal to is 318 gr. ltb 2, outside screw rising stainless steel aisi 304 spindle, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges faced and drilled to is:1538 table 4 & 6. valves tested by closed end method only. (moc & tc needed for valve)., 100mm dia. cast iron double flanged single door swing non-return valve generally conforming to is:5312 part i, having body, door, cover in graded cast iron to is 210 gr. fg 260; body & door rings of stainless steel to ss aisi 304 , hinge pin of ss aisi 304, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges drilled to is 1538 table 4 & 6.(moc & tc needed for valve)., 100 mm dia dismantling joint pn-1.0 ci dismantling joint complete galvanised , stud, nut and washer and follower flanges, drilled to is:1538 table 4 & 6. ( at delivery side of pump ), supply & fixing of perforated gi cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. s&f gi connector, 6mm dia ms suspender, bolts & nuts, steel fastener etc. as required of the following size. incl. al painting of ms support. [200x50x1.25mm x 3mtr long (18swg)] [app

Central Government/Public Sector

CTN :40116774

16 May, 2025 49.00 Lacs

Poonch - Jammu And Kashmir

Tender For repair/ replacement of old rusted gi/ ci/ ppr/ di pipe line, sluice valves, gate valves, valve chamber, motor and pump etc in the aor of age b/r-i under ge 881 ews

Central Government/Public Sector

CTN :39875507

29 Apr, 2025 3.49 Lacs

Bardhaman - West Bengal

Tender For corrigendum : providing of repair and overhauling service - replacement of damaged underground ci pipeline and installation of valve; as per bid requirement; yes; buyer premises

Central Government/Public Sector

CTN :39890342

29 Apr, 2025 25.00 Lacs

Imphal - Manipur

Tender For corrigendum : repair/maint of ci/di and gi pipes of different sizes including repairs/replacement of sluice valves, air release valve and valve, gate valves, valve chamber pits at lower leimakhong and koirengei.

Central Government/Public Sector

CTN :40077160

12 May, 2025 46.24 Lacs

Kalimpong - West Bengal

Tender For repair maint replacement of old us ci gi pipe line pump sluice valve gate valve valve chamber cleaning of ug sump service tank and miscellaneous allied works and repair maint of security street light flood light post top lantern gate light automatic time

Central Government/Public Sector

CTN :39842010

28 Apr, 2025 37.00 Lacs

Kalimpong - West Bengal

Tender For corrigendum : repair maint of external water supply system replacement of old us ci gi pipe line sluice valve gate valve cleaning of ug sump and service tank and miscellaneous allied works at zone a and b area at kalimpong and sherwani mil stn under ge 867 ews

Central Government/Public Sector

CTN :40019284

06 May, 2025 35.00 Lacs

Danapur - Bihar

Tender For repair maint of di ci gi pipe line various types of valves including valve pit chamber joining and related works and repair maint of street lights flood light security light cables poles and connected works under ge danapur cantt

CTN :40022675

01 May, 2025 NA

Baghpat - Uttar Pradesh

Tender For supply of machinery parts as per drawing year 2025-26 - m.s. roller for mud conveyor as per drg. 1268/r-2 dated 22.06.09) od 100mmxlength 225mm, od 90mm.xlength 200mm, od75mm.x length 630mm, od 100mm x length 740mm, c.s. trash beam bottom bracket as per drawing no. b/2008/c-1357 dated 09.07.08 conversion basis, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, on conversion basis., cast steel swing arm left hand/right hand (gear side) all over machined as per drawing no. b/2002/c-1265/r-2 dated: 22.4.2009, en-19 forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 33 teeth., en-19, forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 68 teeth., c.s.bearing housing with fitted 02 nos. locking camp. plate for roller shaft for mill (all over machined) to be manufactured as per drawing no. b/93/c-1011/r-2 dated: 13-06-2009 material cast steel is: 1030 grade 27-54, dismentling of chopper tubs and replacement of worn out hubs by new hubs, fitting and balancing as per drg. no. b/05/c-1129/r-1, replacement of bronze linner of mill hydralic cap, machining, buffering, fitting & testing., c.s.sprocket on conversion basis as per drg. no. b/94/c-1056, maching of transmission gear shaft from old shaft as per drg. no. b/2001/c-1258/r-1(material-cl-4, is-2004), c.s double sprocket 76 teeth for welding & machining with teeth cutting, c.s double sprocket 25 teeth for welding & machining with teeth cutting, pinion 38 teeth of new main bagasse carrier chain, pinion 25 teeth of new return bagasse carrier chain, pinion 52 teeth of old main bagasse carrier chain, pinion 25 teeth of old main bagasse carrier chain, worm & worm wheel for crystlizer as per drg. no. b/73/c-310, worm as per drg. no. b/75/c310, en-9 forged steel pin for mill a frame as per drg. no. b/2010/c-1377 dated: 12.06.2010. (2 section per pin), c.s. gr 26/52 is-1030 machined knife holder hub for cane leveler as per drg. no. b/2007/c-1337/r-1 dt. 17.07.2022 (without key), repair of links hole of block type chain, c.i. idler for cane carrier as per drg. b/2007/c-1340 on conversion basis with machining, repair of pinion teeth-38 of bagasse elevator, c.s. sprocket wheel 14 teeth for cane carrier head shaft maics-26/52, is 1030 as drg. no. b/94/c-1041/r2 dt. 20.06.2007, en-24 helical pinion with shaft no. of teeth-19, od-90mm, root dia-72mm,teeth face wide-180mm, total pinion shaft length-490mm as per sample, leaf spring supporting frame for grader as per drg. no. b/2022/c-1530. type-1 (spring steel flat size 75 x 8mm), en-9 steel shaft for mill house crane as per drg. no. b/2020/c-1571, mark-1, repair of chain block 02 ton cap., repair of chain block 01 ton cap., repair of chain block 05 ton cap., repair of chain block 03 ton cap., en-9 forged steel pin for mill a frame as per drg. no. b/2010/c-1377 dt. 12.06.2010 (2 section per pin), metalon/teflon ptef bush for rotary screen as per drg. no. b/2024/c-1562 dt. 04.07.2024, brass seat for juice heater double beat valve size 8 as per drg. no. b/2024/c-1564 dt. 14.07.2024

CTN :40023756

23 Apr, 2025 190

Honnali - Karnataka

Tender For purchase of drinking water equipment and spare parts for sc/st colonies and all other villages under hattur gram panchayat limits - standextension bit, bucket washernitrile rubber, g.m.lower valve guide, g.m. upper valve guide, g.m. lower valve assembly, g.m. upper valve assembly, cylinder assemblycomplete set, standassembly non-telescopic, m12 x 50 mm long hex coupler, m10 x 40 bolts with nylock nut, m12 x 40 bolts with 2 nuts, ball bearing 6204z, handleaxle, chain withcoupling, connecting rods10 ft. (3 mtrs)., handle barwelded component, watertank assembly, thirdplate, head assembly (+ cover & axle), moter2hp 25 stg, moter2 hp 20 stg, moter3 hp 25 stg, moter3 hp 20 stg, moter pump14 stg, moter pump12 stg, moter pump10 stg, moter pump8 stg, mugmoter panlset, opnwell motersub15 h p, opn wellmotersub 12.5 h p, opn wellmotersub 10 h p, open well moter sub 7.5 h p, panl bord3 h p, panl bord2h p, moter2h p 25 stg, moter2 h p 20 stg, moter3 h p 25 stg, moter3 h p 20 stg, mug moter panlset, opn well moter sub 12.5 h p, moter6 h p 12 stg, moter8 h p 12 stg, moter5 h p 8 stg, moter6 h p 8 stg, mm 305 mtr 1100 v cable10 s q, axelframe, pn6 pe 100 hdpe pipe2 1/2mangalam, c r i n r v 3, v-guard moter 0.5 hp, pvc pipe90 mm 6kg, nut bolt3/8x11/2, wrench18pipe, pipe w.rench18, ring spanner24x26, duoble spanner24x26, duoble spanner14x15, double spanner12x13, ring spanner12x13, ring spanner18x19, duoble spanner18x19, ring spanner20x22, pipe w.rench 24, pipe w.rench 14, pipe w.rench 12, dol starter (13-21a), h d p pipe3mangalam, g i nippal3h d p, out door typepanel board, p nippl s s2h d, nipplss212hdp, fuse63 amps, pn6 pe100 hdpe pipe2 mangle, relay unit l&t, agri sl valve50 mm, nipple20x9, union32mm, g i coller25 mm (1, g i bend15 mm, g i nipple 3650 mm, g i coller25x20 1x3/4, g i coller20x15 1/2, g i elbow20x15 mm, pvc fta63 mm, pvc rmta75x63 mm, pvc rmta90x75 mm, pvc rmta90x 63 mm, repair saddle90mm, repair saddle110 mm, repair saddle63x15 mm, meteringpanel, flanz65 mm (slv), flanz50 mm (slv), end cap20 mm, mm r c75x63, mta15mm, g i nipple 3015 mm, g i nipple 2415 mm, g i nipple 3615 mm, gi nipple 4820 mm, g i nipple 3620 mm, gi nipple 615 mm, g i nipple6 50mm, g i elbow50 mm, pvc pipe15 mm 12, pvcpipe25mm3 4, g i nipp1850 mm, pvc ball valve90 mm, mm f t a15, mm f t a25, ashirvad column pipe32 mm, mm g i nippl50x12, g i bend50mm, g i coller20mm, g i elbow20 mm, ginipple620mm, gi nipple 1220 mm, g i nipple 1820 mm, g i nippl 20 mm 24, pvc ball valve25mm, pvc ball valve20 mm, pvc ball valve75mm, pvc coller 25 mm8kg, pvc coupler90mm4kg, g i coller50 mm, mm pvc r f t a75x63, s l valve 65 mm, pvc m t a 90mm 6kg, pvcthread elbow 90x75 mm, pvcball valve plane110 mm, pvc ball valve plane110 mm, pvc tee90 mm 6kg, pvc elbow90 mm 6kg, pvc end cap 63 mm 6kg, f t a pvc 63 mm, pvc elbow75mm6kg, l& t starter, reapere coller110 mm, reapere coller90 mm, fta pvc 90mm, pvc coller90mm, pvc coller 75mm, g ielbow2 isi, sp2preventer, motor panelboard, m t a pvc 63 mm, fuse100amps, flanz 110 mm, sp3 preventer, autostarter, tatapipe50mmgig, finolex sub cable 2.5 sq mm, bolt nut 12 mm, standassembly, g i b nipple 20x24, g i b nippe h 20x12, taper cock 20 mm, pvcshadlefinolex75x25mmb, axelblade, airvalve, aluminium coil 1000 feet 10 mm, borecap 2 10, shallacv, pvc elbow (thread)75x63 mm, g i bend isi 50 mm, mm g i nipple 50x12, gi coller heavy 50 mm, ashirvad ci top & bottom adopter 50mm, ashirvad column pipe50mm, g i nipple h 50x6, trangel boll valve 50 mm, moterunnati 7.5 h p 12 stg, aluminium coil 300ft 10 mm, clamp double nut bolts 2heavy, panelbox big, finolex sub cable 4.0 sq mm, pvc service shaddal finolex 63x25 mm, spanner 22 mm, pvc tee finolx 75 mm 6kg, novolt coil, pvc elbow finolex 75 mm 6kg, sj relay 20-32 a, pvc pipe finolex 75mm 4kg, meet ball valve p 65 mm, j k solvent 500 ml, pvc elbow finolex 63 mm 6kg, ball vale pvc p 63 mm, pvc pipe 6kg finolex 40 mm, p v c pipe finolex 63 mm 4kg, jk solution 100 ml, reapere coller finolex 63mm

Central Government/Public Sector

CTN :39792928

23 Apr, 2025 1.40 Crore

Jabalpur - Madhya Pradesh

Tender For corrigendum : special repair to conversion of existing main rising(supply line) ci to di and distribution pipe line including sluice valve, valve pit and allied fittings of offrs md accn mandir colony, shaitan enclave, ashiyana line) under ge (east) jabalpur

Spindle Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors