Latest spool piece Tenders | Government spool piece Tenders

corporations/Associations/Others

CTN :43543036

28 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For supply of 600 nb spool piece for sea water booster pump in unit iii

CTN :43545836

28 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For supply of 600 nb spool piece for sea water booster pump in unit-iii note: 1. prospective bidders may get the specification free of cost by downloading from the following websites. tangedco www.tangedco.gov.in nic https://tntenders.gov.in tender opening (electronically): o/o the superintending engineer/p&a/ttps tuticorin. (executive engineer/sp/ttps)

CTN :43414033

15 Jan, 2026 10.09 Lacs

Thiruvananthapuram - Kerala

Tender For construction of madakkathara grama panchayath stadium in ollur lac, thrissur- supply and installation of outdoor gym equipment - open gym equipment, od263824/2025-2026 : chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od ?b? class gi pipe. foundation plate ?m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od ?b? class g.i. pipe. handle - made up of ø48mm od ?b? class g.i. pipe. link - made up of ø 48 mm od ?b? class g.i. pipe. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. bearing bush closing cap?s? pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material.foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin ? made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips?a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od263826/2025-2026: air walker - supply and installation of air walker having the following specifications: dimensions: (l x w x h) 1190 x 380 x 1244 mm. main frame- ø 88 mm od "b" class gi pipe dually bending design.foundation plate- m.s. round plate of ø 250 mm & 8 mm thick. paddle ø 42 mm od round gi pipe. handle - ø 33 mm od "b" class gi pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use to support it. top closing cap dome shape made by pp / nylon / hdpe material. closing cap's - pp / nylon / hdpe material. bracket - 8 mm thick laser profile is used to support paddle frame. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brands. pin's ø 25mm m.s. bright bar pin. circlips- a 24 circlips are used for assembly. bearing bushes -ø 60 mm od seamless pipe. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od263830/2025-2026 : leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500mm. main frame - ø 114 mm od “b” class gi pipe. foundation plate – m.s. round plate of ø 250 mm & 8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is ø 60 mm od “b” class gi pipe. seat frame - ø 42 mm od “b” class gi pipe. leg press back rest should be angled in 120 - 130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest – 380 x 275 x 60 mm thick high- density polyethylene (hdpe) blow molded with m

CTN :43463693

21 Jan, 2026 4.64 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground- thanniyam stadium in kallara grama panchayath in vamanapuram lac, thiruvananthapuram- supply and installation of outdoor gym and sports equipment - outdoor gym equipments, od252260/2025-2026 : horse rider - supply and installation of horse rider having the following specifications:dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundationplate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon /hdpe material. remaining frame is made by 48 mm od ?b? class gi pipe. seat frame ?is made by 48mm od ?b? class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od ?b? class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od ?b? class gi pipe. paddle vertical support - 60 mm od ?b? class gi pipe. handle frame- 42 mm od ?b? class gi pipe dually bending design. foot pipe - 33 mm od ?b? class gi pipe. support frame ? 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe.bearing bush closing cap ? pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft.foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand.bearing bushes - 60mm od seamless pipe. pin ? made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips ? a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od252261/2025-2026 : back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od ?b?class g.i. pipe. foundation plate ? m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od ?b? g.i pipe. seat rest pipe ? 42 mm od ?b? class g.i pipe. handle pipe ? 33 mm od ?b? class g.i pipe.footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 3 mm thick used to support it. footrest pipe ? 42 mm od ?b? class g.i pipe and 80 x 40 mm ms rectangular pipe. closing cap ?pp / nylon / hdpe material. seat ? 360 x 300 x 2 mm thick m.s. seat with corner fillet for safety. grips - high quality rubber 46 mm od. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od252262/2025-2026 : cross trainer (double) - supply and installation of double cross trainer having the following specifications: dimensions: (l x w x h) 2280 x 550 x 1650 mm. main frame- made of 88 mm od ?b? class gi pipe dually bending design. foundation plate ? m.s. round plate of 250 mm & 8 mm thick. paddle vertical support - 42 mm od ?b? class gi pipe. handle - 33 mm od ?b?class gi pipe dually bending design. leg movement frame ? 50 mm x 50 mm x 2 mm thick square pipe. footrest - cast iron 124 x296 x 5 mm thick and m.s. plat

CTN :43519340

28 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For supply of 200nb spool piece suitable for seal water suction lineof stage i & ii

CTN :43519342

27 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For supply of ash slurry pump suction connecting spool piece suitable for ash slurry pump house of stage i & ii note: 1. prospective bidders may get the specification free of cost by downloading from the following websites. tangedco www.tangedco.gov.in nic https://tntenders.gov.in tender opening (electronically): o/o the superintending engineer/p&a/ttps tuticorin. (executive engineer/sp/ttps)

CTN :43519343

27 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For supply of 200nb spool piece suitable for jetting water suction line of stage i & ii note: 1. prospective bidders may get the specification free of cost by downloading from the following websites. tangedco www.tangedco.gov.in nic https://tntenders.gov.in tender opening (electronically): o/o the superintending engineer/p&a/ttps tuticorin. (executive engineer/sp/ttps)

CTN :43519344

27 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For supply of 200nb spool piece & 900 bend suitable for seal water suction line of stage â€“ i & ii note: 1. prospective bidders may get the specification free of cost by downloading from the following websites. tangedco www.tangedco.gov.in nic https://tntenders.gov.in tender opening (electronically): o/o the superintending engineer/p&a/ttps tuticorin. (executive engineer/sp/ttps)

Central Government And Public Sector

CTN :43521564

30 Jan, 2026 NA

Kudankulam - Tamil Nadu

Tender For supply of dmf air inlet to rinse outlet t spool piece as per annexure 1 , dmf air inlet to rinse outlet t spool piece as per annexure 2 , dmf backwash outlet extension elbow as per annexure 3 , dmf backwash outlet pipe line 595 mm as per annexure 4 , dmf inlet extension elbow as per annexure 5 , dmf service outlet 3 way spool piece as per annecure 6 , dmf service outlet 4 way spool piece as per annexure 7 , dmf backwash inlet header line elbow as per annexure 8 , dmf backwash inlet header pipe line 2510mm as per annexure 9 , dmf backwash inlet header pipe line t spool piece as per annexure 10 , dmf backwash inlet header pipe line 4180mm as per annexure 11 , dmf backwash inlet pipe line 1860 mm as per annexure 12 , dmf backwash inlet pipe line 3830 mm as per annexure 13 , dmf backwash inlet header pipe line t spool piece as per annexure 14 , dmf backwash inlet pipe line 3520 mm as per annexure 15 , dmf backwash inlet header line elbow with t spool piece as per annexure 16 , dmf backwash inlet header pipe line 3220mm as per annexure 17 , dmf backwash inlet header pipe line 2000mm as per annexure 18 , dmf backwash inlet extension elbow as per annexure 19 , dmf backwash inlet extension elbow as per annexure 20 , backwash pump suction pipe line 3770mm as per annexure 21 , backwash pump suction pipe line 1150mm , backwash pump suction pipe line 3900mm as per annexure 23 , backwash pump suction pipe line extension elbow as per annexure 24 , ph ii cwst pump suction pipe line 3998mm as per annexure 25 , cwst pump suction pipe line 1793mm as per annexure26 , cwst pump suction pipe line 700mm as per annexure27 ) /bid number : gem/2025/b/6902235 * /dated: 09-01-2026 & & / bid document 1 / 28

CTN :43521989

30 Jan, 2026 NA

Multi City - Multi State

Tender For supply of fabricated unequal tees 250 x 63 mm sdr 11 pn 12.5 pe 100 , ms flanges 2 inch x 150 class ansi 16.5 , concentric reducers 125 x 160 mm sdr 11 pn 12.5 pe 100 , eccentric reducers 150 x 200 mm sdr 11 pn 12.5 pe 100 , 90 degree elbow 200 mm butt fusion is 8360 2022 sdr 11 pn 12.5 pe 100 , 90 degree elbow 63 mm butt fusion is 8360 2022 sdr 11 pn 12.5 pe 100 , 45 degree elbow 160 mm butt fusion is 8360 2022 sdr 11 pn 12.5 pe 100 , ms flanges 10 inch x 150 class ansi 16.5 , ms blind flanges 10 inch x 150 class ansi 16.5 , 250 mm hdpe butt joints , 200 mm hdpe butt joints , 160 mm hdpe butt joints , other size joints less than 6 inch size , erection of hdpe piping , hydrotesting of all loops after jointing , cs flanges 6 inch x 150 class ansi 16.5 , cs flanges 8 inch x 150 class ansi 16.5

Spool Piece Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government And Public Sector