Latest spreader beam Tenders | Government spreader beam Tenders

CTN :41024731

29 Jul, 2025 1.89 Lacs

Bagepalli - Karnataka

Tender For specification and application of the push cart conforming to indian standard is 2431 1963 iatest for singale wheel type wheel baeeow is 4184 1967 latest for two wheels type wheel barrow no product isi markedno cml number na nominal capacity of push cart 240 liters material used for manu facture rear wheel material type of chasssis frame sigle length of steel tube of 25 mm nominal bore any other suitable steel section, such as flat of size 25 x 3 mm, angle channel section of equivalent strength, suitably bent to form a support for the wheel and the body. ms with solid rubber type ms with solid rubber type front wheel material front wheel hdpe type minimum diameter of the axle/spindle 26 millimeter minimum nominal width of type 32 millimeterminimum diameter of the wheel301 millimeter number of partitions in bins for segregation 2 thickess of each partition 24.5 millimeter provision of rear side door to unload waste with handle and lock provision yes minimum diameter of front wheel 201 millimeter size of ball bearing 6205 25mm x 52 mm x15mm type of bearing/ bush double ball bearing finish of metal parts two coats of black bituminous paint conforming to is 158-latest gavanised other finish finish other two coats of black bituminous paint and gavanised na purchase of 03 wheel push cart for door to door collection with 04 bins of ltr capacity each

Central Government/Public Sector

CTN :40664405

16 Jul, 2025 5.39 Lacs

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : providing of customized amc/cmc for pre-owned products - camc of icp-ms instrument; make agilent model 7800 product no g8421 serial no sg20055147; comprehensive maintenance contract (cmc); 1 pm; no

CTN :41000214

04 Sep, 2025 NA

Patiala - Punjab

Tender For supply of battery box complete & general arrangement of battery box assembly (fini shed product of stainless steel) to clw specn. no. clw/ms/3/037 alt. 9 with annexure-a c onsisting of (1)battery box complete & general arrangement of battery box assembly t o clw drg. no. 1209-06.138-001 alt. 8, 1209-06.138-002 alt. 1, (2) section & detail of batter y box arrangement to clw drg no. 1209-06-138-002 alt. 1 (3) provision of additional hole s as per joint note dated 11.06.24 and str no. clw/2015/eldo/m/str/56 rev. 0 with annexure i,ii,iii & iv. [ warranty period: 240 months after the date of delivery ]

State Government

CTN :40989691

19 Jul, 2025 NA

Bolpur - West Bengal

Tender For supplying of non scheduled miscellaneous items for kashinath smriti community hall (p-ii) under bolpur municipality.-"2. air conditioner (split type)description: capacity: 1.5 ton (for halls ~200300 sq. ft) type: inverter split a.c. energy rating: minimum 3-star or 5-star bee rating compressor: rotary or twin inverter compressor (low noise) refrigerant: r-32 or r-410a (eco-friendly) features:o auto restart, sleep mode, timer functiono dust filter, anti-bacterial filtero copper condenser (for better durability) accessories: remote control, stabilizer (if required), copper installation kit warranty: 1 year on product, 510 years on compresso""led smart television (tv)description: screen size: 32 inches (optional: 65 or 75 for larger halls) resolution: 4k ultra hd (3840 2160) display type: led / qled panel features:o smart tv with wi-fi, bluetooth connectivityo android os or proprietary os (google tv, webos, etc.)o pre-installed apps (youtube, zoom, chrome, ms teams)o multiple ports: 3hdmi, 2usb, lan, optical audio outo screen mirroring support for mobile/laptop casting accessories: remote control, wall mount kit, batteries""a geyser heats water for bathing, kitchen use, or cleaningessential for comfort during colder months or in high-rise apartments where hot water is needed on demand.???? 2. types of geysers:type description best usestorage geyser stores hot water (635 litres) bathroom, family useinstant geyser heats water instantly, no storage (16 l) kitchen, small bathroomsgas geyser runs on lpg/png gas areas with gas pipeline, low electricitysolar water heater uses solar panels to heat water eco-friendly, long-term savingsheat pump geyser advanced tech, high efficiency large households, high initial costimmersion rod portable electric rod temporary, low-cost solution???? 3. standard capacities:capacity (litres) suitable for6 10 l 1 person, instant use???? 4. tank material:material features life spanstainless steel rust-resistant, durable mediumcopper tank fast heating, corrosion-prone shorter lifeglass-lined (vitro) anti-rust, long life long-lastingpolymer coated best corrosion resistance very durable???? 5. heating element:copper coil fast heating, economicalincoloy or glass-coated anti-scale, long lifewattage: 2 kw (standard); 3 kw (fast heat)""a pvc office chair uses polyvinyl chloride (pvc) material in the seat and backrest covering. it is synthetic leather-like, affordable, water-resistant, and easy to clean.???? 2. types of pvc office chairs:type description use caselow back chair covers lower back only reception, short tasksmid back chair supports back to shoulder level standard desk workhigh back chair supports full back, shoulders, and head long hours, executivesrevolving chair 360 rotation + wheels daily desk usevisitor chair (fixed) pvc seat with fixed base (no wheels/rotation) guest/meeting roomexecutive chair cushioned, high back, armrest, headrest senior officials, managers???? 3. key features to look for:feature purposepvc upholstery durable, water-resistant, low maintenanceadjustable height comfortable seating for various desk levelstilt mechanism recline function for relaxed postureswivel base (360) easy movementwheels/casters mobility on tiles or carpetarmrests reduces shoulder/arm fatigueergonomic backrest lumbar support for long sitting hoursgas lift (hydraulic) smooth height adjustmentmetal/plastic base durability (metal preferred for heavy use)???? 4. dimensions (typical):part size rangeseat width 1822 inchesseat height adjustable: 1722 inchesbackrest height low: 16"", high: 2832""load capacity 100150 kg"

Central Government/Public Sector

CTN :41017456

31 Jul, 2025 NA

Multi City - Multi State

Tender For supply of 3 kvar metalized polypropylene gas filled, wavy cut three phase self healin g type capacitors, rated at 480v, 50hz, rated current 3.6 amps. capacitor should have di scharge resistor and over pressure disconnection. as per rdso modification sheet no. r dso/ pe/ms/ ac/0054-2011 rev-0 or latest. m/s. epcos and m/s. vishay or any other equivalent capac itor confirming to is:13340 with isi marked and having properties as defined in table-1 of rdso modifi cation sheet no. rdso/pe/ms/ac/0054-2011 rev-0 or latest. firm shall submit complete type test re port as per is: 13340 along with latest isi certification. note: product must be isi marked as per is:133 40 and complete type test must have been done from laboratories recognized by bis for the product. l ist of such labs are as below: electrical research and development association, gujarat. ace test labs & metrology pvt. ltd. hi physix laboratory india private limited. central power research institute (cpri ), bangalore. firm must submit type test report of the product for is:13340 obtained from any of above listed labs along with their offer. offers without such test report will not be considered. [ warranty pe riod: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40974166

23 Jul, 2025 NA

Hyderabad-T - Telangana

Tender For providing of operation and maintenance of other machines and plants - final product handling, painting of ms drums, replacement of scrubber solution and effluent transfer at zop

Central Government/Public Sector

CTN :40995958

11 Jul, 2025 NA

Multi City - Multi State

Tender For led display panel component part no bn95-11038f for samsung led display model no.lh65 bedhlgklxl165 cm range. full hd (1920x1080) resolution. display size:165 cm, resolution: full hd (1920 x 1080 pixels), panel type: direct led (d-led), brightness: 350 nits (typical), contrast ratio: 4,000:1 viewi ng angle: 178 deg (horizontal / vertical), response time: 6.5 ms (typical), refresh rate: 60 hz, power supp ly: ac 100?240 v, 50/60 hz, power consumption: typical: 148 w, maximum: approx. 220 w, operating tem perature: 0 deg c to 40 deg c, operating humidity: 10% to 80%.make: samsung component part no. bn95 -11038f only. note: original purchase proof document/ oem genuine component certificate shall be attache d along with product delivery. component assembly and testing shall be under scope of supply. warranty: 1 year. [ warranty period: 12 months after the date of delivery ]

CTN :40859793

28 Jul, 2025 NA

Hooghly - West Bengal

Tender For procurement of equipment, instrument, machineries, tools etc. related to laboratories and workshops of mechanical, electrical, civil, chemical engineering and science and humanities departments of hooghly inst of tech. - v notch channel test section: size: 250mm wide, 180mm deep; 600mmlong.materials : made with m.s lined with fiber or s.s 304baffle and deepened entry section for steadying water supply.arrangement for 7 fixing interchangeable notches.set of three brass notchesv notch (60 , 45 ).rectangular notch, electric oven size: 24 x 24 x 24- 03 shelvesspecification: vertical model , triple walled construction: front opening door, top mounted control panel for easy access, inner wall made of stainless steel with mirror polish, outer body made of mild steel with powder coat finish electrically operated thermostat with corresponding indicators. nichrome made long lasting heating elements, high grade glass wool insulation, g.i. made wire mesh shelves with adjustable runners., adsorption isotherm apparatusmagnetic stirrer in multi-position 6 and erlenmeyer flasks with lids (125 ml. - six nos.), distillation unit 1.distillation column : material stainless steel, dia 110mm, seven sieve trays.pressure gauge: bourdon type, 0-2 kg/cm2.rotameter: for cooling water flow rate measurement.steam generator: made of stainless steel, provided with pressure gauge & level indicator, safety valve & insulated with ceramic wool and cladding with aluminium foil.reflux divider: special arrangement to change r/d ratio automatically. condenser: shell & tube type made of stainless steel.bottom product tank: made of stainless steel, capacity 5 ltrs.distillate tank: made of stainless steel, capacity 5 ltrs.heater: nichrome wire heater.temp. sensors: rtd pt-100 typecontrol panel comprises of:digital temp. controller : 0-199.9 c, for steam reboilerdigital temp. indicator : 0-199.9 c, with multi-channel switchwith standard make on/off switch, mains indicator etc.2. flow measurement: rotameter for cold water for condenserdistillation still: material- stainless steel, capacity 5 ltrs (approx.) insulated with ceramic wool and cladding with aluminum foil.condenser: concentric tube type (material- stainless steel)distillate tank: material- stainless steel, capacity 2 ltrs.heater: nichrome wire heater.control panel comprises of :digital temp. controller: 0-199.9 c, rtd pt-100 type (for steam generator)digital temp. indicator: 0-199.9 c with multi-channel switch.temp. sensors: rtd pt-100 typewith standard make on/off switch, mains indicator, set up to determine the linear expansion co-efficient of a metal rod.material of metal bar: copper, length of metal bar(total):500mm, dia: 25mm, no of thermocouples mounted on the bar:6 , no of thermocouples in the insulated shell: 2, heater: band type, cooling jacket dia:75mm, no of thermocouples:10, ammeter: 0-5amp, voltmeter: -0-300v, dimmerstate:1000w, temp indicator: 0-300oc, experimental set up of bricks/walls in series for conductivity measurementdiameter of slab:0.3 m, thickness of bakelite, wood and ms plates: 0.012 m, temp of indicator: 0-300oc, ammeter - 0-5amp, voltmeter- 0-300v,heater: mica type, dimmer state: 1000w, vacuum filtration apparatus with buckner funnel apparatus.material porcelain, for use with (application)suction filtration, product type buchner funnel, glass reciver - 2000 ml, 5000ml , (customised), grade 41 filter paper pkt/ 100, concentric tube heat exchanger apparatusinner copper tube i.d, 12.7mm. and outer g. i. pipe i. d. 15mm. approx. and 1.5m. length.2. thermometers - 4 nos.3. measuring flask - 1 lit. capacity.4. geyser-3 kw. single phase.services required-1. 220v, 15a, stabilized single-phase ac supply.2. floor area - 3m x i m x 1 m height.concentric tube heat exchanger: (a)plain tube ( water to water ):the apparatus consists of two concentric tubes. inner tube consists of copper tube through which hot water flows. while the outer tube consists of gi pipe through which cold wat

CTN :40983962

22 Jul, 2025 2.93 Crore

Imphal - Manipur

Tender For providing of furnitures and kitchen utensils for eklavya model residential school (emrs) at laljuri and damcherra, north tripura, tripura. - knock down class room dual desk is specially designed for rugged use. the desk are made of pressed formed ms crca section & crca tube fitted with pre laminated particle board top, seat & back with machine pressed pvc egde banding 2 mm thick glued with industrial adhesive and diffused with board monolithically . hanger for water bottle and bag. space for keeping pen, pencil and scale. the overall appearance of the product shall be as per indicative potographs attatched:desk top 18mm both side laminate(bsl) prelam partical board 400 mm wide bench top 18mm bsl prelam partical board 330 mm wide front shelf 18mm bsl prelam partical board 300(wide)mm.bench back 18mm bsl prelam partical board 250(w)mm.modesty panel 18mm bsl prelam partical board 300 (w)mm.supporting understrucure- left hand and right hand frame consisting of vertical, horizontal and cross member made up of 25 x 1.2 mm outer dia erw tube confirming to is grade 4932 and shall be finised with epoxy polyster powder coated finish with dft 50-60 micron confirming is 13871:1993. the support system of bench and shelf shall also made up of made up of 25 x 1.6 mm outer dia erw tube confirming to is grade 4932 and shall be finised with epoxy polyster powder coated dft 50-60 micron confirming is 13871:1993.. resting support plate made of table top , provided on the top of vertical members shal be made up of 3mm thk crca sheet conforming is-grade 4932. legs shall be fitted with pvc leveler. construction is fully welded with mig welding and assembled using m6 trilobularscrews(as per din 7500)with zn blue plating. compact top, seat and back panels are assembled using m6 countersunk trilobular screws(as per din 7500) with zn black plating (as per is 1573:1986)., dual desk :overall size 1100 (w) x 930-950( d) x 650 (h) - desk depth 390-400 mm. seat height 375 mm for classs 6-8), dual desk-(overall size 1100 w x 940-975( d )x 750 h - desk depth 400 mm. seat height 450 mm for classs 9-12), supply and installation of office table as per approved design and as directred by engineer-in-chargework top - work top shall be made 25mm thick pre-lam mdf board confirming to is 12406:2003 with post foming on front and back and machine pressed pvc egde banding 2 mm thick glued with industrial adhesive and diffused with board monolithically on other two sides understructure- c-type leg shall be made of 50x50x1.6mm thick vertical member and 40x40x1.6mm thick m.s. pipe of horizontal/cross member confirming is-grade 4932shall be finised shall be finised with epoxy polyster powder coated dft 50-60 micron. legs shall be fitted to the ground with m8 screw leveler with the height adjustment up to 12mm to 15mm.cross members shall be mounted by end brackets made of 3mm thick is 513: 2008 crca sheet shall be finised with epoxy polyster powder coated dft 50-60 micron confirming is 13871:1993.wire management-electrical wires shall be carried from horizintal/ vertical duct made of 0.7mm crca sheet confirming to is 513:2008. switch plate or cromet depending upon requirement shall also be provided for electrical/lan connection on table top. modesty panel -modesty panel of height 450 mm shall be made of 1.5mm thick crca sheet confirming to is 513: 2008 and shall be finised with epoxy polyster powder coated dft 50-60 micron.storage body- storage top shall also be made of 25mm thick pre-lam mdf board confirming to is 12406:2003 with post forming on two sides and machine pressed pvc egde banding 2 mm thick glued with industrial adhesive and diffused with board monolithically on other two sides. the body of storage units shall be made of 0.8mm thick crca sheet and skirting shall be of 1.2mm thick crca sheet confirming to is 513: 2008 finished with epoxy powder coated of dft 50-60 micronconfirming is 13871:1993. internal shelves shall be also made up of 0.8mm crca sheet co

State Government

CTN :40859641

14 Jul, 2025 1.91 Lacs

Siliguri - West Bengal

Tender For supply and installation of miscellaneous office furnitures at zonal administrative building, zcc building, testing building at power house complex, sevoke road and at zonal store building at shibmandir, siliguri under zonal office, siliguri, wbsedcl. - fixed visitor chair, overall dimension:- 530w 10 x 53d 10 x 815h 10 mm,seat & back of chair is made 12mm thick hot pressed plywood cushioned with pu moulded foam fabric upholstery,furniture sustainability should have certificate of bifma membership as per ansi product for some products aiota, griha certificate, igbc membership, indoor air quality, green pro, green co silver, iso 9001:2015, iso 14001:2015, iso 50001:2011, iso 45001:2018 is mandatory. all the iso certificates should be obtained from nabcb (central govt) accredited organization armrest: pu paded armrest fixed on main frame ,under structure frame made of ms pipe with 14 gauge thickness duly powder coated with plastic bushes., medium back revolving chair, overall dimension:- 715w 10 x 715d 10 x 1080h 10 mm,seat of medium back chair is made of 12mm thick hot pressed plywood pasted with pu moulded foam with fabric upholstery on seat , used pu moulded foam on seat of d-45 kg/m3 , back of medium back chair is made of injection moulded pp material structure in black colour upholstered with mesh fabric , seat size:- 460w 10 x 470d 10 x 60thick. 5 mm , back size:- 440w 10 x 470h 10, furniture sustainability should have certificate of bifma membership as per ansi product for some products aiota, griha certificate, igbc membership, indoor air quality, green pro, green co silver, iso 9001:2015, iso 14001:2015, iso 50001:2011, iso 45001:2018 is mandatory. all the iso certificates should be obtained from nabcb (central govt) accredited organizationmechanism:- centre tilt mechanism single point control,-used gaslift of 90 mm size of class-iv grade , plastic gas lift cover,armrest:- fixed pp armrest in black colour, seat & back connected with arms,chair base & wheels:- revolving pedestal metal inserted ppcp base consists of 5 prongs with 660 5 mm pitch circle diameter , 50mm dia. black nylon - twin wheel pin castor ., overall size 1200w x 600d x 750h ,table top made up of 25mm thick plpb board with 2mm thick pvc edge banded finish with as per approved laminate shade , top supported under structure of table gable - end made of prime quality 18mm thick plpb board , top size 1200w x 600dx25mm thick , gable - end size 550d x 722h x18mm & modesty panel size 1114w x 722hx18mm , drawer size 400w x 450d x 722h , first drawer front facia size 400w x 160h, second drawer front facia size 400w x 160hmm, filing drawer front facia size 400w x 320h mm, filing drawer used sliding telescopic channel with all fittings & shutter, used c - frame stainless steel handles ,furniture sustainability should have certificate of bifma membership as per ansi product for some products aiota, griha certificate, igbc membership, indoor air quality, green pro, green co silver, iso 9001:2015, iso 14001:2015, iso 50001:2011, iso 45001:2018 is mandatory. all the iso certificates should be obtained from nabcb (central govt) accredited organization drawer all wooden panels used 2mm thick pvc edge beading fixed with hot melt glue, table & drawer panels flat edge duly sealed with pvc beading , 75hx364wx18mm high wooden panel skirting provided in fixed drawer , all wooden panels cleaning corner knitted finish , all wooden panels , gables & modesty fix joints with minifix dowels & other fitting equipment , all wooden panels prime quality board with isi marked., computer table top and other parts made from 18mm thick plpb board as per approved laminate shade. top supported understructure of table gable - end made of prime quality 18mm thick plpb board. top size 1200w x 600d. pencil drawer size 400w x 450d x 170h . furniture sustainability should have certificate of bifma membership as per ansi product for some products aiota, griha certifica

Spreader Beam Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government