Latest spudcan repair Tenders | Government spudcan repair Tenders

CTN :42439221

03 Nov, 2025 3.50 Lacs

Pune - Maharashtra

Tender For supply of excavation work 3 cm x 50 cm x 44 mtr for side foundation size 14 mtr x 8 mtr,ml for brick block masonry work 20 cm x 45 cm for foundation wall plinth level,ml for ms square tube frame work 75mm x 75mm for pillars and 50mm x 50mm x 16 guage for main rafter truss and per lings size 46ft x 25ft,sf pre coated roof sheet 0 point 50mm thik fixing with tapping screw 2 14ft x 46ft,ml for plaster cement concrete work with using 20 to 25mm aggregate 100mm thick with smooth finish ratio 1 2 4 area 14mtr x 8mtr x 01 point 10mtr

Central Government/Public Sector

CTN :42269593

22 Oct, 2025 1.79 Lacs

Mugma - Jharkhand

Tender For repairing of rhs crack track frame portion, twisted idler fitting, track roller foundation, track chain master pin, roller guard dismantling and fitting of idm-30 drill si. no.dr-184 at dahibari ocp, cv area.

Central Government/Public Sector

CTN :42343209

24 Oct, 2025 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - scrap heavy structure all type of ms and gi such as rail board, rail pieces, boggie frame, weigh bridge and bridge items, all type of air baloyar, rail dolley, p.way trolly, girder, channel, lorry, machine, hand lorry, wheel barrow, fob cut up material, gi pipe, tie bar, tie bar structure, channel, gi channel sleeper for bridge, angle, frame, round bar, cage frame, rail poll, airtank, pressure chamber, mast,gi mast, bolster, m.s. sheets and flat, checkered plate, ci foundation, ms tool trunk, velley gudder, air reservoir, cattle guard, shutter, ci items, rail structure, ms crip, c type clamp, grill, signalling rod, windows, door, machine, cut of material, reliesed mg liner frame bridge etc. with or without other ferrous and minor non ferrous attachment old used and u.s.[hammering and cutting allowed at the time of delivery]

Central Government/Public Sector

CTN :42343214

24 Oct, 2025 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - scrap heavy structure all type of ms and gi such as rail board, rail pieces, boggie frame, weigh bridge and bridge items, all type of air baloyar, rail dolley, p.way trolly, girder, channel, lorry, machine, hand lorry, wheel barrow, fob cut up material, gi pipe, tie bar, tie bar structure, channel, gi channel sleeper for bridge, angle, frame, round bar, cage frame, rail poll, airtank, pressure chamber, mast, gi mast, bolster, m.s. sheets and flat, checkered plate, ci foundation, ms tool trunk, velley gudder, air reservoir, cattle guard, shutter, ci items, rail structure, ms crip, c type clamp, grill, signalling rod, windows, door, machine, cut of material, reliesed mg liner frame bridge, over head crane parts, etc. with or without other ferrous and minor non ferrous attachment old used and u.s. [hammering and cutting allowed at the timeof delivery]

Central Government/Public Sector

CTN :42343217

24 Oct, 2025 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - scrap all types of signalling items, teli items, ohe items such as door closer, ms sheet, gi wire, battery box, shaft, g.i. pipe, rt, st, bt, tube, clamp, roller,signalling wire, telecom pole,, stand, junction box with or without terminal, pulley, c.i. structure, ladder, point rod, lock bar, signal post, shunt signal, l.c. gate items, diversal wheel, counter weight, esr, all type of liver and lock, ci, ms case, angle, frame, mast, all type of foundation, chenal, motors, small motor, trestless, tc safe, electronic pannel, point machine casing, point machine, pole, doom, hs lamp, pipe support, signalling battery casing, rope wire, electronic panel box, lamp post, key, clamp, fasterning aids, panel, signalling mast, chequered plate, copper wire, g.i. rod, alluminium attached etc. with or without minor n. f. attachment old used and u.s. (hammering and cutting allowed at the time of delivery)

corporations/Associations/Others

CTN :41508588

29 Oct, 2025 9.77 Crore

Pune - Maharashtra

Tender For corrigendum : request for bids for supply, installation and commissioning of slaughter house plant as per apeda standard - a: civil work items, dismantling the reinforcement cement concrete (r.c.c.) work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., dismantling brick masonry in lime or cement mortar and stacking the material as directed with all leads, lifts etc., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete., removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete, removing purlins from roof including stacking as directed with all leads , lifts etc. complete., removing rafters from roof including the materials as directed with all leads , lifts etc. complete., removing queen post truss from roof and stacking the materials as directed with allleads and lifts etc. complete, removing galvanized iron (g.i.) or asbestos cement (a.c.) sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete., excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the cubic meter (cu.m) excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift from 1.5 to 3.0m.) by mechanical means, excavation for foundation in soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0 m.) by mechanical means, lift upto 3.0 m, excavation for foundation in hard-rock by blasting including cubic meter (cu.m) trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (lift from 1.5m to 3.0 m) by mechanical means, filling in plinth and floors with approved excavated materials available at site in 30 cm layers include- ing watering and compaction with plate compactor to required proctor density etc complete., filling in plinth and floors with contractors material/brought from outside and approved by engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete., providing dry trap / granite / quartzite gneiss 200 mm thick hard core metal spread in two layers each of 125mm thick crushed to 100 mm c

CTN :42226438

20 Oct, 2025 3.47 Lacs

Pune - Maharashtra

Tender For supply of excavation work 3 cm x 50 cm x 44 mtr for side foundation size 14 mtr x 8 mtr , ml for brick block masonry work 20 cm x 45 cm for foundation wall plinth level , ml for ms square tube frame work 75mm x 75mm for pillars and 50mm x 50mm x 16 guage for main rafter truss and per lings size 46ft x 25ft , sf pre coated roof sheet 0.50mm thik fixing with tapping screw 2 14ft x 46ft , ml for plaster cement concrete work with using 20 to 25mm aggregate 100mm thick with smooth finish ratio 1 2 4 area 14mtr x 8mtr x 0.10mtr

CTN :42213760

30 Oct, 2025 70.00 Lacs

Chennai - Tamil Nadu

Tender For supply of dsitc of 3x50 hp air cooled variable refrigerant flow or volume split type ac plants d d - supply of 50 hp vrf or vrv outdoor unit , supply of indoor unit floor standing dx type ahu capacity of each unit 50 hp , supply installation testing and commissioning of refrigerant pipes , supply and installation of remote status indication panel , supply and installation of switch panel , wiring of control circuit of ac plant , supply of 4 core 10 sqmm copper shielded armoured cable odu to mcb , supply of 4 core 16 sqmm copper shielded armourmed cable ahu to switch panel , supply of all control cable 2 core 1.5 sq.mm copper shielded cable between indoor and outdoor unit laid in pvc piping and clamp , supply of refrigerent gas , intallation testing commissioning of 3x50 hp vrf or vrv outdoor unit and ahus , nitrogen flushing pressure testing vaccumising and commissioning the system , modification of duct , supply fabrication installation of ms base frame or platform for odus , supply and installation of canvas connection , supply and installation of g.i perforated cable tray with top cover with supports , modification of plenum chamber , surface painting and finishing , provision of foundation blocks and vibration isolation , miscellaneous , dismantling of ac plant and cooling tower , lifting and shifting of odu and ahu , training

Central Government/Public Sector

CTN :41978341

20 Oct, 2025 NA

Mysore - Karnataka

Tender For corrigendum : 1) design, supply, foundation, installation, testing , commissioning training and proving out of hydraulic c frame press machine -100ton capacity along with warranty(warranty includes preventive maintenance schedule (pms) 8 quarters as per the format enclosed as per annexure b) as per the technical specification annexure a enclosed.2) comprehensive annual maintenance contract for 05 years as per enclosed in annexure-c(camc), after completion of machine warranty period.

Spudcan Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector