Latest spur gear Tenders | Government spur gear Tenders

State Government

CTN :40534123

05 Jun, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of c.i./c.s. casted item - c.i. casted items on new basis, c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c

Central Government/Public Sector

CTN :40330103

02 Jun, 2025 NA

Malanjahknd - Madhya Pradesh

Tender For corrigendum : supply of micro switch for vcb type vk 10 j25 make jyoti ltd , closing coil 940 0092 for vcb type vk 10 j25 make jyoti ltd , tripping coil 940 0092 assembly , spring charge motor 110 220 v dc , spur gear assembly 4vc49 0018 , pinion gear assembly 4vc49 0091 , split pin set of 12nos , setting ring 957 5036 circlip , 2 pole aux switch 2no j309 021 , 5 pole aux switch , 16 pin plug with socket for 11kv vcb , relay re 300 coil 110v dc , tripping half shaft assly 4vc49 , closing half shaft assly 4vc49 0069 , breaker auxi. switch

CTN :40492676

17 Jun, 2025 NA

Dehradune - Uttarakhand

Tender For supply of set of mechanical spare for horizontal machining center - bevel gear, gear ratio 2:1, no. of teeth 120, no. 11721609210 , small gear, gear ratio 1:2, no. of teeth 6, no. 11721604312 , worm gear shaft. shaft dia. 50mm, length 350mm, no. 117216018304 , worm wheel, no. 6583803110 , cam follower small, no. fg824ee , spur gear pallet, no. 117225142321 , bevel gear set, no. 117225143112 , cam follower big, no. fg1535ee , axis lubrication pressure switch, 24vdc, 1 no, 2 wire, 0-25kg/cm , bellow cover for y axis, y axis travel 1000mm, no. 11722512230 , pallet changer bellow cover, no. 11722522025 , radial ball bearing (45/75x16), no. 6009 , needle cage bearing (30x40x20), no. 304020 , hex-soc-hd-scr-m5x20, no. 1172252430 , quad ring (109.3x5.7), no. 117222133 , o ring seal kit (one set) no. 1172252456

corporations/Associations/Others

CTN :38227444

30 May, 2025 NA

Cuddalore - Tamil Nadu

Tender For bid to ras corrigendum : supply of drive & driven spur gear for lignite air lock feeder in set

CTN :40330427

05 Jun, 2025 NA

Durg - Chhattisgarh

Tender For corrigendum : tender for supply of auma make actuator and spares - auma o ring pn01 07 2 point 02 3 point 01 5 point 010 sa25 , set of o rings kit auma type sa12 , set of o rings kit auma type sa6 , clutch fork asmbly auma sa12 partno 8 pa , clutch fork assly part no 8 for sa25 , clutch fork assy sa6a45 , limit switch drive assly p n 31 for sa25 , spur gear part no 2 point 2 for sa3 sa6 , spur gear part no 2 point 2 for sa25 sa30 , return spring sa12 sa15 , return spring sa25 sa30 , clutch rol pin long pn7 sa25 sa30 , clutch rol pin short pn6 sa25 sa30 , declutch lever for model sa 25 , de clutch latch sa12e45 , de clutch latch sa25b63 , de clutch latch sa6a45 , tension spring sa12e45 , tension spring sa6a45 , clutchring support pin for model sa 25 , declutch tripp arm pn14 sa3 sa6 , bearing flange for model sa 25 , bearing flange for model sa 6 , retaining ring for model sa 6 , compression spring sa12 sa15 , compression spring sa3 sa6 , clutch ring part no 26 for sa25 , clutch ring sa6a45 , hellical gear for model sa6 , handwheel for model sa12 , handwheel retainer part no 30 for sa2 , hand wheel retainer sa6b22 , limit s w drive hellical pinion for sa6 , compression spring sa25 sa30 , o seal set compl sa12 sa15 , o seal set compl sa3 sa6 , oil seal kit for sa25 sa60 actuator , circlip sa25 sa30 , circlip sa3 sa6 , circlip sa12 sa15 , motor pinion part no 2 point 1 for sa25 sa30 , quad ring for model sa25 , quad ring for model sa12 , quad ring for model sa6 , ts drive assy sa25b63 , ac motor 0 55kw 2800rpm for sa6e125 actr , cem415acv1 point 1eq23056s4s27 10941r1 sa3 100 , limit switch 2no 2nc for sa3 to sa100 , sph card sa12e45 , pwr mod m415acv1 point 1eq23056s28 11231r1 , electronic position transmitter rwg 2002 , potentiometer 0 4 point 7 kohms p n 9 point 1 auma , rgu sa6 15 variable , declutch tripp arm pn14 sa3 sa6 , clutch ring part no 26 for sa3 , clutch ring sa12 sa15 , clutch ring part no 26 for sa25 , clutch ring part no 26 for sa100 auma , torque switch drive assly pn 45 for sa , torque sw drive assy sa12 sa15 , torque sw drive assy sa50 sa60 , tor sw drive assy pn45 sa100 , ls drive assy pn 31 sa6 , ls drive assy pn 31 sa12 , ls drive assy pn 31 sa25 , ls drive assy part no 31 , stem nut type a for sa6 type auma act , elect actuator stem nut type 221a 4 point 12 , stem nut type a for sa60 auma actuator , elect act stem nut type 221a 222 4 point 12 , clutch fork assly part no 8 for sa25

Central Government And Public Sector

CTN :40426969

05 Jun, 2025 48.48 Lacs

Ramgarh - Jharkhand

Tender For supply of stem assy,soot blower puppet valve,sb , pckng glnd,1-00-073-60003 and 3,d56xl91,bhel , glnd bshng,1-00-073-60003 and 4,d50xl45,bhel , met plain gasket,wall sb,f or puppet vlv , packing set,1-00-073- 60003 and 6,bhel , packing gland housing,puppet valve,sb , pipe plug or relief vlv,3 or 8in,f or puppet vlv , spring retainer,bhel,wb1e , stem cap,1-00-073- 60003 bps,bhel,boiler , spring,1-00-073-60003 and 10 , valve head assy,bhel,wb1e , gasket,travers gb,wall sb,wb-1e , cover gasket for j.b wall s blower wb-1e , oil seal,1-00-073-60109 and 37 , worm spacer,wall soot blower,wb-1e , spacer 2 ,bhel,wb1e , spacer 3 ,bhel,wb1e , upper roller,wall sb,f or rack gear housing , spur gear 12 teeth , wall sb ,wb-1e , worm gear 30 teeth ,wall sb,model wb-1e , worm 1 start,wall soot blower,wb1e , guide rod,1-00-073- 60109 and 09 , roller shaft for rack gear housing ay wb , rack pinion,1-00-073-60109 and 6 , valve body,f or wall descegar,wb-1 e , thrust washer,bhel,wb1e , air valve of sbv head assy , spur gear wblwr rotary gearbox wb1e , primary gear,1-00-076-60110 and 12 , rotary gear housing,0- 20-201-00048,bhel , spiral wound gasket,2-00-073- 60088 and 9 , comp assy,bhel,wb1e , cam assy,3-00- 073-60008 , rack and cam assy,3-00-073-60106 , pin,3- 00-073-60105 bps,bhel,boiler,500mw , clevis bracket assy,bhel,wb1e , cover gasket,rot gear box,wall sb,wb-1e bid number/ & ( * ) : gem/2025/b/6123504 dated/ + : 21-05-2025 bid document/ 2 2 1 / 29

CTN :40330458

24 May, 2025 4.94 Lacs

Kolar - Karnataka

Tender For supply of mechanical spares hmt radial drilling machines - eccentric shaft small , eccentric shaft big , spur gear 17t , lubrication pump , ring nut , brake liner , rollers , press piece , segment , spur gear motor pinion d2267001 , pinion shaft ref no r56 230 300 3 , lever r56 230 262a 4 , clutch disc set outer inner , clutch housing , clutch shaft key way type r56 431 200 , lock and unlock cup

State Government

CTN :39711294

27 May, 2025 NA

Manuguru - Telangana

Tender For corrigendum : supply of t and p materials for cam division/stage-i and ii/btps.-supply of t and p materials for cam division/stage-i and ii/btps.- heavy duty general purpose hydraulic jack,capacity:5ton,, stroke:150mm,model:xl00, hydraulic jack:, capacity:20ton,stroke length :12mm,jack closed height:lessthan 55mm., hydraulic pump specifications.no of plungers:1,maximum pressure, pump, can develop:700kg/cm2,discharge/stroke.cc:2.8,weight: <=9kg., pump with teliscopic collapsible handle, hydraulic jack,with pmp threaded,100t,150mm, make: ener pac, portable arc welding machine model tornado -201 power saource with with, 3 meters supply cable + 3 meters welding cable with holder + 3 meters, return cable with earth clamp, make : esab/l&t/ador fontec, digital vibration meter model:ird 811d, gauge,dial;range:0.01 to 20 mm, make: mitutoyo, dial guage stand magnetic on/off switch, make:mitutoyo, vernier caliper (0-150mm) code no.530-335, vernier caliper (0-300mm) code no.530-322, make:mitutoyo, outside micrometer (150-300mm) code no.104-136a, make:mitutoyo, outside micrometer (300-400mm) code no.104-142a, tubular inside micrometer code no.137-208, block,chain pulley;type:triple spur gear manual;capacity:5 t;length:20, m;make:indef;additional information:lift p-series, block,chain pulley;capacity:2 t;maxi lift:20 m, block,chain pulley;type:heavy duty triple spur gear,light weight, body;capacity:1 t;maxi lift:15 m, make: indef/demag/kito/venus, d-shackle 5ton, make: usha martin, shackle;type:d;load rating:1 t, d-shackle 2 ton, make: usha martin, shackle;type:d;load rating:3 t, make: usha martin, d shackles 10 ton lifting capacity, make: usha martin, steel wire rope slings 10 ton capacity x 6mtr long, make: usha martin, belt sling,75 mm width 4 mtrs. length of polyster duplex flat webbing, with plain loops at both ends safety factor 7:1., make: usha martin, circlip;type:plyer;size:195 mm;additional information:ptno 1441-7internal nose, hand operated high pressure grease gun with all accessories(hose,nipples & trolley arrangement)-5kg capacity, allen keys set,1/16'' to 3/8'', feeler gauge, thickness: 0.03 to 0.5mm, no of leaves: 13 (long leaves),series: 184, make:mitutoyo, universal sets adjustable spanner 1171 cp insulation plier 162-8j,s.d.932&859, spanner set,double open end;size:32x36 mm;material:chrome vanadium/carbon steel, taparia make heavy duty pipe wrench ,length-450 mm,least max opening 73mm,product no-hpw 18, make:tapparia/mekastar/stanley/torquestar, taparia make heavy duty pipe wrench ,length-250 mm,least max opening, 48mm,product no-hpw 10, make:tapparia/mekastar/stanley/torquestar, d spanners set, 12nos, 6-32 mm, make: jhalani, bench vice,150 mm, ring spanner 6-32mm, hand pump, for oil barrel, hand greaqse gun, capacity:1kg, spanner,mekaster double ended deep offset ring spanner,chrome vanadium, steel chrome plated,wave profile having a/f size (mm):32x36 confirming, to din 838,iso 3318,10103,10104&691.,part no.mdrm-3236, spanner,mekaster double open ended spanner chrome vanadium, steel,chrome plated,position of open ends 15 degree having a/f size, (mm): 36x41 confirming to din 3110,899,iso 1711,10102,691&3318,part, no.mdom-3641, mekaster double ended deep offset ring spanner, chrome vanadium steel, chrome plated, wave profile having a/f size (mm):41x46 confirming to, din 838, iso 3318, 10103, 10104 & 691.,part no.mdrm-4146, spanner set,double open end;size:41x46 mm;material:chrome, vanadium/carbon steel, 400 amps inverter welding rectifier.model: buddy arc 400i, make esab, l and t, ador, fontec, chain pulley block,5t,10m, make - indef, demag, kito, venus, block,chain pulley;type:p;capacity:2 t;maxi lift:10 m, make - indef, demag, kito, venus, block,chain pulley;type:p;capacity:3 t;maxi lift:10 m, make - indef, demag, kito, venus, self supporting extendable aluminum ladder size; 16feet(closed) to 27, feet (extended), wire rope slings with eye & eye, 25ton x 1 1/4 x 6 mtrs length., make usha martin

CTN :40329245

21 May, 2025 NA

Gorakhpur - Haryana

Tender For supply of spur gear for surface traverser cap. 80 ton as per drg. no. g/sd-1489.gear teet h should be hardened and profile ground between 50 to 60 hrc with material certificate fr om govt.approved agency [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40307616

06 Jun, 2025 NA

Bengaluru - Karnataka

Tender For spur gear dia 164x30 to m/s. hmt drawing no. y12921063-3 for station-1/cnc ' b' shop(hmt machine y1292) use in ct head assembly. special conditions: 1. warranty period: w arranty of 18 months from the date of delivery or 12 months from date of fitment or use whichever is early. 2.material test certificate (mtc) from nabl accredited laboratories for chemical composition / p hysical properties should be submitted along with the material supply. [ warranty period: 18 month s after the date of delivery ]

Spur Gear Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

Central Government And Public Sector

State Government

Central Government And Public Sector