Srp Surface Unit Tenders

Get complete information related to latest Srp Surface Unit Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Srp Surface Unit Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Srp Surface Unit Tenders .

Filter

Loading....

Get Tender in Email

State Government

CTN :42239255

29 Jan, 2026 3.80 Crore

Bengaluru - Karnataka

Tender For corrigendum : tender for the supply of consumables to bowring & lady curzon hospitals, hsis gosha hospital & shivajinagara charaka super specialty hospital attached to sabvmcri - disposable plastic glove medium, disposable plastic glove large, disposable plastic glove small, flower caps disposable, sterile ophthalmic irrigation solution single use only 500ml, mercury free bp apparatus mannul, hypromellose ophthalmic solution usp 2% w/v 5ml, intraocular foldable lens size 25, intraocular foldable lens size 24.5, intraocular foldable lens size 24, intraocular foldable lens size 23.5, intraocular foldable lens size 23, intraocular foldable lens size 22.5, intraocular foldable lens size 22, intraocular foldable lens size 21.5, intraocular foldable lens size 21, intraocular foldable lens size 20.5, intraocular foldable lens size 20, intraocular foldable lens size 19.5, intraocular foldable lens size 19, intraocular foldable lens size 18.5, intraocular foldable lens size 18, o t slippers size 10, o t slippers size 9, o t slippers size 8, disposable eye pad (for eye cover), liquid sterile water for injection 500 ml bottle, horse shoe shaped head ring ( soft gel type), gel positioners contour arm board 510x150x35mm, gel positioners closed head ring 200x75x45mm (adult), gel positioners closed head ring 140x60x35mm (paediatric), sodalime 5 litres can intersorb plus or equivalent (should comply with us pharmacopeia or b.pharmacopiea), paediatric spinal needle 27g, paediatric spinal needle 26g, paediatric spinal needle 25g, whitacre pencil point spinal needle 27g, whitacre pencil point spinal needle 25g, busca mask or its equivalent, macintosch rubber sheet (44 width 1m 114 x 90cm), pulse oxymeter adult, on & off kit disposable (pristine), oxygen flow meter (cyclinder type), distilled water 5 litr can, culture swab sticks , cautry pencil monopolar, disposable , cautry plate (compatable to hospital machine), k3 edta non vaccum vaccutainer red tube plain peadiatric, non vaccum vaccutainer red tube plain peadiatric, non vaccum sodium floride vaccutainer 2ml, non vaccum sodium citrate vaccutainer 1.8ml, non vaccum red tubes (blood collection tubes , clot activator), k2 edta/ non vaccum purple tubes (blood collection tubes), saline iv bag for pressurising arterial line, intranule, arterial cannula 20 guage, arterial leader catheter 4fr x 20g, etco2 sample line (disposable) with water trap, nasal oxygen cannula (neonatal), combitube 37 fr, lma supreme size -4.0, lma supreme size -3.0, laryngeal mask reusable prosealsize -5.0, laryngeal mask reusable proseal size 4.0, laryngeal mask reusable proseal size 3.0, laryngeal mask reusable proseal size 2.5, laryngeal mask reusable proseal size 2.0, laryngeal mask reusable proseal size 1.5, laryngeal mask reusable classic size 5.0, laryngeal mask reusable classic size 4.0, laryngeal mask reusable classic size 3.0, lma reusable (classic) size 2.5, laryngeal mask reusable classic size 2.0, lma reusable (classic) size 1.5, lma reusable (classic) size 1, intubating lma adult 5.0, intubating lma adult 4.0, intubating lma adult 3.0, i gel size 50, i gel size 40, i gel size 30, i gel size 25, i gel size 20, i gel size 15, i gel size 10, magill forceps (all 3 sizes), stub handle laryngoscope with all size blades no- 3, 4., mccoy laryngoscope with all size blades no- 3, 4, millers laryngoscope with size blades size no- 0, 1, 2 (paediatric), millers laryngoscope with all 4 size blades no- 1, 2, 3, 4, extra large laryngoscope blade or laryngoscope blade size 5, mcintosh laryngoscope with all 4 size blades no- 1, 2, 3, 4, 5, mcintosh laryngoscope with all 4 size blades no- 1, 2, 3, 4., ventilator circuit disposable (paedaitric kit ventilator circuit 2limbs plain hme filter +paediatric cather mount), ventilator circuit standard double water trap with hme filter , tube support adultclosed circuits (metal type or strong fabric type), paediatric closed circuit for anaesthesia workstation, adult closed circu

CTN :43547065

27 Jan, 2026 NA

Kapurthala - Punjab

Tender For supply of fully plastic moulded chair with arms seat andback cushioned , executive table or office table , laboratory or library or canteen table , computer table , computer and printer table , conference room table , chemistry lab table , foot rest , laboratory table with boxes , laboratory table with drawers , revolving chair big , revolving chair small fully plastic moulded chair with arms (seat &back cushioned)-size - total height : 820mm + 10mm, total width : 565mm + 10mm, total depth : 565mm + 10mm &total weight: 4. 20 kg + 50gms cushioned chair with arms comprising of single piece moulded frame made of polypropylene & coated with pu coating paint high gloss finish with seat & back cushion made of moulded pu foam and velvet upholstery. weight of moulded polyproplene frame is 4. 2 kg. , executive table/office table-made up of injection moulded polypropylene. d). leveler glide for leg : leveler should be made of nylon 6 & consist of ms bolt. storage: storage should consist of pedestal. the pedestal should further consist of a). shell which should be 0. 6mm thick crca (is:513) and should have powder coat (epoxy polyester) as finish. b). drawer tray which should be 0. 6mm thick crca (is:513)and should have powder coat (epoxy polyester) as finish c). drawer front which should be 0. 8mm thick crca (is:513) and should have powder coat (epoxy polyester) as finish d). frame assembly which should be 1. 2mm thick rca (is:513) and should have powder coat (epoxy polyester) as finish. e) lock which should be 10 lever cam lock f). handle which should be made of injection moulded polypropylene g). leveler which should be made up of nylon 6 and should also consist of ms bolt ) /bid number: gem/2026/b/7096951 * /dated: 12-01-2026 & & / bid document1 / 23powder coating process: all the metal parts shall be given antirust surface treatment and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a controlled temperature of 180 c to 200 c. manufacturer / supplier must have iso- 9001, 14001, bifma & ohsas certifications. , laboratory/ library/canteen tableoverall size: 1800 mm (w) x 900mm (d) x 740mm(h) +10mm tolerance on overall sizes. frame:legs of table frame should be made of erw round pipe of 48mm+1. 0mm and 1. 5mm thick(min) supports shall not be more than 160mm from the floor level when measured frombottom of pipe two supports of the same pipe should be provided breadth wise in between thelegs of the frame and two supports should also be provided length wise between legs supports are welded to each other properly. the frame top should be made of ms angle iron size38mmx38mmx5mm(min. ). the bottom of legs should be closed with metal shoes. top:top should be made out of 18mm +-1. 0mm commercial board fixed with good quality sunmica 0. 75mm thick. shade of sunmica top should be natural teak/ baverian beach. all the edges of the sunmica top should be fixed with teak beading duly spirit polished. finish all steel components are to be prepared for degreasing and derusting. after pretreatment,the steel steel components are to be epoxy powdercoated. thickness of powder coatingshould be 50-60 micron (min). shade of powder coating should be nickle grey/ seimn grey. , computer table-computer table should have dimensions (mm) 900 x 750 d x 730 with +- 10mm tolerance on overall sizes. the computer table should consist of following components. tops should be made up of 25mm thick pre laminated particle boards with machine fitted pvc edge banding on all sides. understructure should be made of 50. 8 x 25. 4 mm x 1. 25 mm thick powder coated erw tubes at base which should welded to the vertical channels which

Central Government/Public Sector

CTN :43547287

28 Jan, 2026 NA

Kollam - Kerala

Tender For supply of plastic scrap grinder , hand operated injection moulding machine 15 gm , hand operated injection moulding machine 30 gm , hand operated compression moulding machine , hand operated blow moulding machine

Central Government/Public Sector

CTN :42991841

12 Jan, 2026 NA

Warangal-T - Telangana

Tender For bid to ras supply of plastic injection moulding machine

CTN :43378616

20 Jan, 2026 14.37 Lacs

Gwalior - Madhya Pradesh

Tender For supply of 667 mg tab , danazol 100 mg cap , dexamethasone 8 mg tab , misoprostol 200 mg tab , conjugated oestrogen vaginal cream tube of 14 gm , prednisolone 10 mg tab , thyroxine sodium 75 mcg tab , clindamycin 600 mg injection 150 mg per ml of 4 ml , hydroxychloroquin 300 mg , airway long transparent oropharyngeal set consisting of size length 000 oblique 3 point 5 00 oblique 5 0 oblique 5 1 oblique 7 2 oblique 9 3 oblique 1 4 oblique 1 , adhesive incise drape 50 x 45 cm , adhesive incise drape 25 x 30 cm , adhesive incise drape 5 x 15 cm , apparatus anaesthetic facemask with air cushion transparent size 0 infant , apparatus anaesthetic facemask with air cushion transparent size 1 paediatric , apparatus anaesthetic face mask anitistatic with air cushion transparent size 2 medium , apparatus anaesthetic facemask antistatic with air cushion transparent size 3 adult with valve , apparatus anaesthetic facemask antistatic with air cushion transparent size 4 , apparatus oxygen inhalation portable facemask disposable for , apparatus oxygen inhalation portable tubing 1 meter with connector for , apparatus oxygen portable light weight tubing 122 cm white mask adapter and bayonet connection for , apparatus anaesthetic facemask angle mount for , bag rebreathing antistatic rubber 2 ltr , bag mount complete with adaptor , catheter suction endobronchial with terminal transparent non toxic pvc tubing size fg 10 length 45 cm , catheter suction endobronchial with terminal transparent non toxic pvc tubing size fg 12 length 50 cm , chest drainage system , cylinder oxygen o2 gas for , double lumen catheter cannula with guide wire introducing needle and dilator , ot pack large gamma irradiation sterilized consisting of operating gown large 1 operating gown med gloves size 7 gloves size 7 point 5 towels 75 x 75 cm gauze 7 ponit 5 x 7 point 5 cm gauze pad , laryngoscope adult bulb for , laryngoscope infant bulb for , laryngoscope cells for , long iv line 15 g 100 cm , long iv line 18 g 100 cm , supraglottic device with non inflatable cuff and gastric drain port igel for size 1 1 point 5 2 and 2 point 5 , supraglottic device with non-inflatable cuff and gastric drain port igel for size 3 4 and 5 , manometer scales , mask wire gauge circular with gauge retaining clip and oxygen feed tube chrome infants , medium and high concentration oxygen see through mask pvc with 7 ft oxygen supply tubing adult , medium and high concentration oxygen see through mask pvc with 7 ft oxygen supply tubing paediatric , mapleson non rebreathing system bain circuit , plastic connector male 22 mm taper connection , plastic connector female 22 mm taper connection , nasal cannula adult , nasal cannula paediatric , needle epidural anaesthesia with luer lock fitting with stylet 15g ss , needle epidural anaesthesia with luer lock fitting with stylet 18g ss , needle spinal anaesthesia with luer lock fitting with stylet 22g ss , needle spinal anaesthesia with luer lock fitting with stylet 24g ss , needle spinal anaesthesia with luer lock fitting with stylet 25g ss , operating pack containing sheet large 3 trolley cover 2 surgeon gown 4 , outfit venous pressure manometer complete , paediatric anaesthetic circuit complete non rebreathing system , pressure infusion bags 500ml , rapid infusion set , resuscitation tube for mouth to airway resuscitation plastic , silicon full face mask for bipap cpap machine , t piece in three sizes , triple lumen catheter kit cannula guide wire dilator introducer needle , transducer holder disposable , tube corrugated pvc 105 cm long with connection , tube plastic mount connection , tube endotracheal reinforced pvc size 3 point 0 without cuff //bid details2 / 95, tube endotracheal reinforced pvc size 3 point 5 without cuff , tube endotracheal reinforced pvc size 4 point 0 without cuff , tube endotracheal armoured stylet for , tube endotracheal nasal size 2 point 5 without cuff point , tube endotracheal nasal size 3 point 0 without cuff point , tube e

Loading, Please wait...

Srp Surface Unit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector