Latest ss angle Tenders | Government ss angle Tenders

corporations/Associations/Others

CTN :39796556

28 Mar, 2025 NA

Noida - Uttar Pradesh

Tender For auction sale of wooden pallet,burning wood,misc iron items (assorted irons/angles/grills/iron rusted sheets etc,polythene including ldpe wasters,mix of lubrication oil sp-100 & lubrication oil sp-150,e-wastecomputer scrapitemasperlot annexure,mechanical scrap items, as per lot annexure

corporations/Associations/Others

CTN :39797756

25 Mar, 2025 NA

Chennai - Tamil Nadu

Tender For auction sale of miscellaneous scrap waste like flats, angles, bars, frames etc,used lube oil and grease drums with and without lid-200 liter capacity

corporations/Associations/Others

CTN :39797620

28 Mar, 2025 NA

Bangalore - Karnataka

Tender For auction sale of ms materials, i-beams, angles, mesh iron, bolt &nuts etc.,scrap 24f opgw cable in rings,scrap alluminium hardware parts with bolt & nuts,scrap acsr conductor in rings (such as drake, owl, coyote, linx),scrap aluminium cable in cut pieces/rings with diff.sizes,scrap tyres of diff sizes.,scrap empty steel cable drums 11kv ( approx wt 300kg),pothead end termination of 11 kv class,breakers, link box, switchgear parts, panel box etc,scrap t&p materials,scrap control cable, copper u.g.cable & telephone cable etc.,scrap plastic cans & telephone

Central Government And Public Sector

CTN :39662308

11 Apr, 2025 NA

Bengaluru - Karnataka

Tender For carriage of light melting scrap(lms) consisting of wagon body (in dismantled/cut conditions), wagon cbc components without rubber (for example couplers and draft gears without pads), wagon bogies (in dismantled condition), wagon end buffers, yoke, knuckles, springs (including springs used in casnub bogies), ms angles, tie bars, erc (elastic rail clips), ms panel sheet & wagon door, ms sheet, scrap ms melting, ms adopter wide jaw and narrow jaw, ms cub spacer, ms shearing plate, bogie frame bolster, ms plate, ms ingot and others; from various railway units in india to rail wheel factory, yelahanka, bengaluru - 560064; under the distance slab of above 1000kms (with a mean distance of 2500kms), by road.quantity:4000mt. note: the work involves other intermediary and ancillary activities such as: (1)collection of lms (2) loading the lms into the vehicle. the contractor shall load only those lms items which are free from rubber components (3)unloading at destination, by railways at free of cost.special note: mandatory documents should be submitted in compliance of bid security, annexure-v, annexure-v(a), annexure-vi(b), power of attorney and iba certification. non-submission of necessary documents in support of the above shall result in summarily rejection of bids.

State Government

CTN :39721600

02 Apr, 2025 NA

Karur - Tamil Nadu

Tender For procurement of ss materials for construction of rcc chimney for rsps 2 on f.o.r. kagithapuram basis - ss materials for constructions of rcc chimney (rsps #2), plate stainless steel thick 10 mm grade ss 304, angle ss 100x100x10, ss304 angle 75x75x6, ss 304 round rod 25mm dia, ss 304 flat 50x6mm thick, chequered plate 6 mm thick ss 304, plate stainless steel thick 6 mm grade ss 304

corporations/Associations/Others

CTN :39743488

26 Mar, 2025 NA

Allahabad - Uttar Pradesh

Tender For auction sale of rusted, broken & damaged-tanks, angles etc,broken, rusted & damaged-jumbo, platform etc,rusted & broken iron stand, small almirah etc.,scrap rusted and expired fire extinguisher,scrap damaged battery etc,scrap rusted & broken drums,scrap drums with burned oil

State Government

CTN :39677522

26 Mar, 2025 NA

Thrissur - Kerala

Tender For auction for brass scrap , 110kv sf6 breaker pole (without actuator) , 220kv sf6 breaker pole (without actuator) , transformer oil drum (rusted and damaged) , 11kv pt (resin cast) , 110kv sf6 breaker pole without bottom box - telk make , 3*300 xlpe and cable , flurocent tube choke , power cable , cooling fan (separated) , ceiling fan , 110kv capacitor unit , 11kv ct resin cast , 11kv cable end , aluminium frames , hardware aluminum parts , 5hp motor with pumb , 5hp motor , 3hp motor , 3 phase motor 0.5 hp , 3 phase motor - 1 hp - 1 nos, 1.5hp-1 nos, 2hp - 5 nos , susi suguna mini monoblock pump set 0.5 hp , 3 phase motor with pumb 1.5 hp , pump honda 1.1 kw 1.5 hp , skm pump 1 hp , arcing horn , disc insulator , ms scrap (fire extinguisher cylinder, sf6 cylinder, ct frames, ms angles.) , 110kv sf6 cb wit structure , surge monitor , barbed wire , 33kv ct , 110kv lighting arrester porcelain , 11kv vcb outdoor with stucture , 33kvpt , 11kv sectionaliser , breather , 11kv 3 * 300 mm2 xlpe al , armoured ug cable , 11kv lighting arrester porcelain , silica gel , vaccum bottle , acsr scrap , iron scrap , 66kv mocb one limb , relay , 11kv ct faulty , 33kv la faulty , 3 phase static energy meter , meter scrap mechanical , voltmeter , ammeter , var meters , power factor meter , mw meter , tri vector meter , control cable (copper) , control cable (aluminium) , 11kv ct resin cast , flurecent tube fittings , xlpe cable scrap , oil drum , damaged disc insulator , control cable damaged , ceiling fan , 11kv vcb bottle , 11kv la , sodium vapour lamb choke , main switch , relay scrap , mv lamb fittings , trivector meter , 3 phase energy meter (mech) , 1 phase energy meter (mech) , mw meter , ammeter , voltmeter , 23ky lighting arrester porcelin , 110/11 kv tfr c & r panel damaged , 110kv feeder control and relay panel damaged , 11 kv la damaged , 11 kv vaccum bottle faulty , 11 kv nct damaged , 11 kv auto recloser damaged , battery charger 110v 15a faulty , voltage transformer 11kv alind arc- damaged , 11kv feeder panel damaged

Co-operative

CTN :39603779

21 Mar, 2025 24.83 Lacs

Bengaluru - Karnataka

Tender For supply erection testing installation of kitchen equipments for cattle feed plant at rajanukunte-, rice vessel with stand, a) vessel shall be of 16g ss of inner size 23" diax23" deep., b) stand frame structure shall be of 16g 50mm dia ss pipe., c) 18g ss lid shall be fitted with frame structure for vessel., d) 25mm diass pipe handle shall be provided for tilting the vessel., e) 16g ss perforated sheet shall be provided for vessel as a strainer., f) cross supports shall be provided on 3 sides with front open., g) 25mm dia drain outlet shall be provided for vessel., h) ss grouting plate shall be provided for grouting., i) steam inlet shall be provided on right hand side of the unit., samber vessel with stand, a) vessel shall be of 16g ss of inner size 20" diax20" deep., b) stand frame structure shall be of 16g 50mm dia ss pipe., c) 18g ss lid shall be fitted with frame structure for vessel., d) 25mm diass pipe handle shall be provided for tilting the vessel., e) 16g ss perforated sheet shall be provided for vessel as a strainer., f) cross supports shall be provided on 3 sides with front open., g) 25mm dia drain outlet shall be provided for vessel., h) ss grouting plate shall be provided for grouting., i) steam inlet shall be provided on right hand side of the unit., idli box with stand and also with idli side table with 2 under shelves (600 x 600 x 850+150) & splash back, a) 16g ss 304 quality double layered chamber., b) 3 nos. idli chamber decks of 3 trays per deck. each tray shall be 20 idlis capacity., c) 12 nos. 20g ss 304 quality idli trays with perforation., d) 12 nos ss drip trays below idli tray., e) front water collection tray for idli stand., f) 38mm dia 16swg ss 304 quality pipe uprights with 3 sides 25mm dia 16swg ss 304 quality cross supports with nylon bullet feet., g) ss door with rubber gaskets shall be provided., h) unit shall be provided with independent steam control valve., i) steam inlet shall be provided on right hand side of the unit., plate rack of five shelves, a) the verticals shall be in ss 38mm dia 16g 304 quality pipes with adjustable nylon bullet feets, b) the shelves of 18g 304 grade shall be down beeded 38mm on all sides and 12mm towards inside., c) bottom shelf shall be provided 150mm above & remaining spaced equally., two burner cooking range, a) the frame work of gas range shall be 32x32x3mm thick ss angle., b) cast iron grid of size 400x400mm shall be provided over the burner., c) 20g ss 304 quality sheet with performance shall be provided on 3 sides & removable front control panel shall be of 20g ss 304 quality steel., d) 20g ss 304 quality sheet handle with ss 22 g 304 grade spillage tray below the burner wil be provided., e) bottom cross supports shall be of 25mm dia 16swg ss 304 quality pipes., f) top shall be of 16 swg ss 304 quality sheet with the cutout to receive 1 no cast iron grid., g) vertical supports shall be of 38mm dia ss pipes 16swg 304 quality with adjustable nylon bullet feet., h) gas inlets on both sides shall be given., i) two high pressure gas burner., dosa plate, a) the frame work of gas range shall be 32x32x3m thick ss angle., b) vertical supports shall be of 50mm dia ss pipes 16swg 304 quality with adjustable nylon bullet feet., c) four side drain channel shall be given with 16swg ss 304 quality splash on 3 sides., d) one piece polished 25mm thick ms dosa plate with 2 handles on either sides of size 1200x600mm., e) 2 nos. ribbon type "v" shaped burners equally placed under the ms plate to get uniform heat., f) bottom cross supports shall be 25mm dia 16swg ss 304 quality pipes., g) suitable windows with cover shall be made in the front control panel for ignition., h) gas inlets on both sides shall be given., i) 20g ss 304 quality sheet with performance shall be provided on 3 sides & removable front control panel shall be of 20g ss 304 quality steel., j) 150mm high 16g ss 304 grade splash on length side. 304 grade pipe upright with adjustable bullet feet, f

Central Government/Public Sector

CTN :39600802

31 Mar, 2025 NA

Bengaluru - Karnataka

Tender For supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial knife sterilize

Central Government/Public Sector

CTN :39587703

23 Apr, 2025 NA

Multi City - Multi State

Tender For supply of s.s. angle moulding for beml coaches shutter panel

Ss Angle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors