Latest ss flat Tenders | Government ss flat Tenders

Central Government And Public Sector

CTN :39774532

07 Apr, 2025 NA

Damanjodi - Odisha

Tender For supply of ring 0700015460 , 70103100800-o ring0700015220 , 71103012710-o ring 0700015355 , 71050093350-crb01 13052 breather , 71103024510-o ring part no. 778ax62137 , 71103024570-floating seal assy part no. 778ax03128 , 71103012650-bearing inner 778 ax 92197 , 71103012660-bearing outer 985 ax 95724 , 71103012490-bearing 787 ax 02211 , 71103012500- bearing outer 787 ax 02033 , 71103012680-bearing assy 787 ax 03005 , 71103010390-double check valve -950 as 02236 , 71103021150-hand control valve 950 as 02188 , 71103021170-non-return valve 950 as 02114 , 71160021820-950as02333 relay emer. valve , 71103021200-non-return valve 950 as 02171 , 71103021210-hose assembly 1000 950 as 02715 , 71103021250-solenoid valve 935 as 03545 , 71103021260-air horn 985 as 02073 , 71103021270- hose assy 985 as 02219 , 71103021300-connector 935 as 15736 , 71103021340-hose assy 985 as 03061 , 71103021420-hose 07102 20316 , 71103021370-hose 07260 21490 , 71103021380-hose assy 564390008509 , 71103021400-hose assy 778 as 02004 , 71103021410- hose 07102 20330 , 71103021360-gasket 07003 13036 , 71103021430-hose 07113 00511 , 71103021450-hose 07113 00509 , 71103010300-brake chamber 561 35 61501 , 71103010310-slack adjuster assly 561 35 41502 , 71103021470-brake chamber assy 561 35 61201 , 71103010090-spacer- 778 ss 10112 , 71103010100-pin- 778 ss 01032 , 71103010040-pin str-787 ss 03057 , 71103010050-washer- cfw 02 13960 , 71103010060-hex nut- cfn 20 43923 , 71103010070-hex nut - 787 hs 11076 , 71103015930-rear view mirror assy 649000038500 , 71103012900-cap screw 561900004030 , 71103012910-washer flat 561900004830 , 71103002130-seal kit front suspension, 935su00021 , 71103002340-bearing rear sus 778ax01013 , 71103002110-seal kit rear suspension,778su00012 , 71103012920-driver seat 951 os 02008 , 71103012930- filter suction 787 hs 02324 , 71103014950-steering cylinder assy, 778hc01107 , 71103010850-hose assembly, 787 hs 03815 , 71103010770-hose assembly, 787 hs 03807 , 71103010740-hose assembly, 778 hs 10555 , 71103015900-u joint assly pt no- pb 3782 , 71103010790-hose assembly , 787 hs 04496 , 71103010750-hose assembly - 787 hs 02065 , 71103010730-hose assembly - 778 hs 06019 , 71103010710-hose assembly- 778 hs 02593 , 71103010630-hose assembly - 565410030000 , 71103010650-hose assembly- 778 hs 02674 , 71103010800-hose assembly, 787 hs 02543 , 71103010720-hose assembly - 778 hs 02771 , 71103010760-hose assembly,787 hs 03401 , 71103010780-hose assembly, 787 hs 04488 , 70250000170-element power and hyd. pt.no. 0706301210 , 71103010240-air dryer 950 as 02374 , 71103010460-dual brake valve 950 as 02528 , 71103024520-packing part no. 787ax62922 , 71103024530-packing part no. 787ax62939 , 71103024540-floating seal assy part no. 985br02534 , 71103014680-o ring part no -0700015360 , 71103024500- o ring part no. 0700015305 , 71103024650-magnetic plug part no. cpl0313620 , 71150445310-chs03 13634 o ring for gauges , 70510101440-o ring part no- chs0113045 , 71103010700-hose assembly - 787 pi 03122 , 71103021920-hose assy 935 fl 02036 , bid details/ 2 / 79 71103021940-hose assy 787 eg 91006 , 71103021950-o ring chs01-12065 , 71103021960-o ring pt.no.chs01- 12060 , 71103021970-breather stem 787 ax 13196 , 71103021980-drain valve 950 as 02317 , 71103022000- double socket 950 as 13803 , 71103022010-double socket 950 as 14662 , 71103022020-compressor tubing 778 as 10056 , 71103022030-pin steering 778 ss 01016 , 71103022040-bush steering 778 ss 10104 , 71103022050- tapped pad steering cpw15 12025 , 71103022060-bush steering 778 ss 10137 , 71103022070-gasket ta 0113 , 71103022080-hydraulic hose 774 hs 02219 , 71103022090-hydraulic hose 774 hs 02227 , 71103010150-pump assembly, 787 hs 02665 , 71103012850-steering control unit pb 6241

CTN :39730997

08 Apr, 2025 NA

Delhi - Delhi

Tender For supply of gastrectomy set - sponge holder, long , curved artery forceps, 6-7 inch, blunt tip , curved artery forceps, 6-7 inch, sharp tip , mosquito artery forceps, curved, 5 inch , straight artery forceps, 6-7 inch , mosquito artery forceps straight, 5 inch , allis tissue holding forceps, 6 inch , allis tissue holding forceps, 7 inch , babcock tissue forceps, 6 inch , babcock tissue forceps, 7-8 inch , kellys clamp, curved long artery, 9-10 inch, fine tip , kellys clamp, curved long artery, 9-10 inch, blunt tip , kochers clamp, curved, 9-10 inch , right angles forceps, 7 inch, 80-90 degree angled, horizontal serrations , right angles forceps, 8 inch, fine tip, 80-90 degree angled, horizontal serrations , right angles forceps, 8 inch, blunt tip, 80-90 degree angled, horizontal serrations , right angles forceps, 9 inch, fine tip, 80-90 degree angled, horizontal serrations , right angles forceps, 9 inch, blunt tip, 80-90 degree angled, horizontal serrations , mayo needle holder, 6 inch, tungsten carbide jaws , ryder needle holder, 6 inch, tungsten carbide jaws to hold 4-0 and smaller , mayo needle holder, 8 inch, tungsten carbide jaws , mayo needle holder, 9 inch, tungsten carbide jaws , durogrip tc debakey needle holder 5 inch length , durogrip tc debakey needle holder 9 inch length , metzenbaum scissors, tungstein carbide blade, round tip, 5 inch curved blade , metzenbaum scissors, tungstein carbide blade, round tip, 7 inch curved blade , metzenbaum scissors, tungstein carbide blade, round tip, 9 inch curved blade , mayo scissors, curved, 6 inch , mayo scissors, straight, 6 inch , fine metallic suction tip, angled 5 mm, length 7 inch , doyen intestinal non-crushing clamp, soft blades, 9 inch, curved, diagonal serrations , doyen intestinal non-crushing clamp, soft blades, 9 inch, straight, diagonal serrations , kocher intestinal non-crushing clamp, soft blades, 9-10 inch, curved, longitudinal serrations , kocher intestinal non- crushing clamp, soft blades, 9-10 inch, straight, longitudinal serrations , clip applying forceps for titanium clips 18.5 cm, medium lt200 , clip applying forceps for titanium clips 18.5 cm, large lt300 , clip applying forceps for titanium clips 18.5 cm, extra large lt400 , open hem-o-lock applicator for small green clips , open hem-o-lock applicator for medium purple clips , open hem-o-lock applicator for large golden clips , deavers retractor, handle length 33 cm, blade 1 inch , deavers retractor, handle length 33 cm, blade 1.5 inch , deavers retractor, handle length 33 cm, blade 2 inch , st. marks pelvis retractor, blade 178-180 x 60 mm, length 13 inch , czerny retractor, small , langenback retractor, distal blade tip slightly curved, flat handle, 21 cm length, blade 2.8 x 1 cm small size , morris retractor, 23-24 cm, small , harrington retractor, 11-13 inch, blade 125 x 45 mm , harrington retractor, 13 inch, 33 cm, blade 125 x 65 mm , harrington retractor, 13 inch, 33 cm, blade 190 x 115 mm , backhaus towel clips, 5-6 inch , kidney tray large 9-10 inch , ss bowl small, diameter 10-12 cm , ss bowl medium, diameter 15-18 cm , ss bowl large, diameter 30-40 cm , s. s. tray, large 12x10 inch with cover

CTN :39731203

08 Apr, 2025 NA

Delhi - Delhi

Tender For supply of incisional hernia surgery set - sponge holder, long , curved artery forceps, 6-7 inch, blunt tip , curved artery forceps, 6-7 inch, sharp tip , mosquito artery forceps, curved, 5 inch , straight artery forceps, 6-7 inch , mosquito artery forceps straight, 5 inch , allis tissue holding forceps, 6 inch , allis tissue holding forceps, 7 inch , babcock tissue forceps, 6 inch , babcock tissue forceps, 7-8 inch , kochers clamp, curved, 9-10 inch , mayo needle holder, 6 inch, tungsten carbide jaws , durogrip tc debakey needle holder 5 inch length , durogrip tc debakey needle holder 7 inch length , thumb forceps, non-tooth, 6 inch, fine tip , potts smith tissue forceps tungstein carbide 6-7 inch, atraumatic , metzenbaum scissors, tungstein carbide blade, round tip, 5 inch curved blade , metzenbaum scissors, tungstein carbide blade, round tip, 7 inch straight blade , metzenbaum scissors, tungstein carbide blade, round tip, 5 inch straight blade , metzenbaum scissors, tungstein carbide blade, round tip, 9 inch curved blade , mayo scissors, curved, 6 inch , mayo scissors, straight, 6 inch , fine metallic suction tip, angled 5 mm, length 7 inch , clip applying forceps for titanium clips 18.5 cm, large 100 , clip applying forceps for titanium clips 18.5 cm, medium 200 , clip applying forceps for titanium clips 18.5 cm, large 300 , clip applying forceps for titanium clips 18.5 cm, large 400 , open hem-o-lock applicator for small green clips , open hem-o-lock applicator for medium purple clips , open hem-o-lock applicator for large golden clips , deavers retractor, handle length 33 cm, blade 1 inch , deavers retractor, handle length 33 cm, blade 1.5 inch , deavers retractor, handle length 33 cm, blade 2 inch , czerny retractor, small , langenback retractor, distal blade tip slightly curved, flat handle, 21 cm length, blade small , morris retractor, 23-24 cm, blade medium , harrington retractor, 11-13 inch, blade 125 x 45 mm , harrington retractor, 13 inch, 33 cm, blade 125 x 65 mm , harrington retractor, 13 inch, 33 cm, blade 190 x 115 mm , backhaus towel clips, 5-6 inch , kidney tray large 9-10 inch , ss bowl small, diameter 10-12 cm , ss bowl medium, diameter 15-18 cm , ss bowl large, diameter 30-40 cm , s. s. tray, large 12x10 inch , cats paw retractor , iris scissor

CTN :39731206

08 Apr, 2025 NA

Delhi - Delhi

Tender For supply of cutdown dressing and minor set for ward icu and hdu - sponge holder, long , curved artery forceps, 6-7 inch, blunt tip , curved artery forceps, 6-7 inch, sharp tip , mosquito artery forceps, curved, 5 inch , straight artery forceps, 6-7 inch , mosquito artery forceps straight, 5 inch , allis tissue holding forceps, 6 inch , allis tissue holding forceps, 7 inch , kellys clamp, curved long artery, 9-10 inch, fine tip , kellys clamp, curved long artery, 9-10 inch, blunt tip , mayo needle holder, 6 inch, tungsten carbide jaws , mayo needle holder, 8 inch, tungsten carbide jaws , durogrip tc debakey needle holder 7 inch length , durogrip tc debakey needle holder 9 inch length , thumb forceps, tooth, 7 inch, tip 2.5 mm , atraumatic thumb forceps, non- tooth, 7 inch, fine tip , atraumatic thumb forceps, non- tooth, 9-10 inch, fine tip , iris scissor , cats paw retractor , eyelid retractor , skin hook , medium size joul retractor , metzenbaum scissors, tungstein carbide blade, round tip, 5 inch curved blade , metzenbaum scissors, tungstein carbide blade, round tip, 7 inch curved blade , metzenbaum scissors, tungstein carbide blade, round tip, 9 inch curved blade , mayo scissors, curved, 6 inch , mayo scissors, straight, 6 inch , czerny retractor, small size , langenback retractor, distal blade tip slightly curved, flat handle small size , langenback retractor, distal blade tip slightly curved, flat handle, medium size , backhaus towel clips, 5-6 inch , kidney tray large 9-10 inch , bp handle no 3 , bp handle no 4 , bp handle no 7 , ss bowl small, diameter 10-12 cm , s. s. tray, large 12x10 inch , small 5 mm metallic suction cannula , stapple remover bid number/ & ( * ) : gem/2025/b/6064256 dated/ + : 18-03-2025 bid document/ 4 4 1 / 27

CTN :39731235

08 Apr, 2025 NA

Delhi - Delhi

Tender For supply of sponge holder, long , curved artery forceps, 6-7 inch, blunt tip , curved artery forceps, 6-7 inch, sharp tip , mosquito artery forceps, curved, 5 inch , straight artery forceps, 6-7 inch , mosquito artery forceps straight, 5 inch , allis tissue holding forceps, 6 inch , allis tissue holding forceps, 7 inch , babcock tissue forceps, 6 inch , babcock tissue forceps, 7-8 inch , kellys clamp, curved long artery, 9-10 inch, fine tip , kellys clamp, curved long artery, 9-10 inch, blunt tip , kochers clamp, curved, 9-10 inch , mayo needle holder, 6 inch, tungsten carbide jaws , mayo needle holder, 8 inch, tungsten carbide jaws , mayo needle holder, 9 inch, tungsten carbide jaws , durogrip tc debakey needle holder 5 inch length , durogrip tc debakey needle holder 7 inch length , thumb forceps, tooth, 6 inch, tip 2.2 mm , thumb forceps, tooth, 7 inch, tip 2.5 mm , atraumatic thumb forceps, non-tooth, 5 inch, fine tip , atraumatic thumb forceps, non-tooth, 6 inch, fine tip , atraumatic thumb forceps, non-tooth, 7 inch, fine tip , atraumatic thumb forceps, non-tooth, 9-10 inch, fine tip , potts smith tissue forceps tungstein carbide 6-7 inch, atraumatic , metzenbaum scissors, tungstein carbide blade, round tip, 5 inch curved blade , metzenbaum scissors, tungstein carbide blade, round tip, 7 inch curved blade , metzenbaum scissors, tungstein carbide blade, round tip, 9 inch curved blade , metzenbaum scissors, tungstein carbide blade, round tip, 9 inch straight blade , mayo scissors, curved, 6 inch , mayo scissors, straight, 6 inch , fine metallic suction tip, angled 5 mm, length 7 inch , doyen intestinal noncrushing clamp, soft blades, 9 inch, curved, diagonal serrations , doyen intestinal non-crushing clamp, soft blades, 9 inch, straight, diagonal serrations , kocher intestinal non-crushing clamp, soft blades, 9-10 inch, curved, longitudinal serrations , kocher intestinal noncrushing clamp, soft blades, 9-10 inch, straight, longitudinal serrations , clip applying forceps for titanium clips 18.5 cm, small 100 , clip applying forceps for titanium clips 18.5 cm, medium 200 , clip applying forceps for titanium clips 18.5 cm, large 300 , clip applying forceps for titanium clips 18.5 cm, extra large 400 , open hem-o-lock applicator for small green clips , openhem-o-lock applicator for medium purple clips , openhem-o-lock applicator for large golden clips , deavers retractor, handle length 33 cm, blade 1 inch , deavers retractor, handle length 33 cm, blade 1.5 inch , deavers retractor, handle length 33 cm, blade 2 inch , czerny retractor, small , langenback retractor, distal blade tip slightly curved, flat handle, 21 cm length, blade small , morris retractor, 23 24 cm, blade small , morris retractor, 23 24 cm, blade medium , morris retractor, 23 24 cm, blade large , harrington retractor, 11 13 inch, blade 125 x 45 mm , harrington retractor, 13 inch, 33 cm, blade 125 x 65 mm , harrington retractor, 13 inch, 33 cm, blade 190 x 115 mm , backhaus towel clips, 5 6 inch , kidney tray large 9-10 inch , ss bowl small, diameter 10 12 cm , ss bowl medium, diameter 15 18 cm , ss bowl large, diameter 30 40 cm , s. s. tray, large 12x10 inch with lid

CTN :39752811

09 Apr, 2025 NA

Kolkata - West Bengal

Tender For supply of big steel hata , ss palta with wooden handle , gravy ss spoon with wooden handle , flat serving ss spoon , large ss rice spoon , big iron boondi puri frying jhara with wooden handle grip , ss deep fry jhara , ss palta for roti , cutting board , knife steel , choper steel , aluminium big rice strainer with handle , tasting plate , side plate , tasting ss spoon , tasting ss fork , desert ss spoon , tea cup with saucer , water glass , small bowl , hand towel , artificial flower bunches for living room , table frill , tray frill , pen stand , caustic soda , aluminium handi

State Government

CTN :39721600

02 Apr, 2025 NA

Karur - Tamil Nadu

Tender For procurement of ss materials for construction of rcc chimney for rsps 2 on f.o.r. kagithapuram basis - ss materials for constructions of rcc chimney (rsps #2), plate stainless steel thick 10 mm grade ss 304, angle ss 100x100x10, ss304 angle 75x75x6, ss 304 round rod 25mm dia, ss 304 flat 50x6mm thick, chequered plate 6 mm thick ss 304, plate stainless steel thick 6 mm grade ss 304

CTN :39730935

08 Apr, 2025 NA

Durg - Chhattisgarh

Tender For tender for supply of teflon rods gi ss wire copper rods ss bolt - ptfe teflon rod solid shape of item round dia or af 40 mm length min 300 mm , ptfe teflon rod solid shape of item round dia or af 60 mm length min 300 mm , ptfe teflon rod solid shape of item round dia or af 80mm length min 300 mm , ptfe teflon rod solid shape of item round dia or af 20mm length min 300mm , wire materials galvanized iron spec is 280 wire dia 1.00mm , rods cu round spec and grade is 191 dia across flat size 20mm dia min length of each rod 300mm , rods cu round spec and grade is 191 dia across flat size 40mm dia min length of each rod 300mm , bolt hex hd ss fastener bolt nut and washer as per specification size m6x30 mm material aisi 304 threadmetric standard coarse mc one setone bolt with one nut and one washer , wire materials stainless steel spec is 304 wire dia 3mm

CTN :39753069

09 Apr, 2025 NA

Bijapur - Karnataka

Tender For supply of carpentry items - mdf plywood 8 mm 8 x 4 feet , mdf plywood 6 mm 8 x 4 feet , drawer channel 18 inch , sliding channal e type 12 feet x 1 inch x half inch - almunium , handle 6 inch , handle 4 inch , bolt 1 inch 5 mm diameter , bolt 1.5 inch 6 mm diameter , bolt 2 inch 6 mm diameter , bolt 2.5 inch 6 mm diameter , bolt 3 inch 5 mm diameter , bolt 1.5 inch 4 mm diameter , bolt 2 inch 4 mm diameter , bolt 2.5 inch 4 mm diameter , takes nails without head 1 inch , takes nails without head 1 x one fourth inch , takes nails without head three fourth inch , takes nails head 1 inch , takes nails head 1x one forth inch , takes nails head three forth inch , t hinges 5 inch , t hinges 8 inch , t hinges 10 inch , t hinges 12 inch , aldrop 10 inch , ss star screw 1 inch , ss star screw 1 x one forth inch , ss star screw 1.5 inch , drill bits 4 mm , drill bits 5 mm , drill bits 3 mm , triangular file 8 inch , hacksaw blade , wall plug 35-10 -dylo fibre grip , crab grip hardened drywall star screw 8 x 32 1000 nos , wooden beeding 1.5 inch x 1 inch x half , gi flat angle bracket 25 mm

CTN :39038230

29 Mar, 2025 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itot in fitter tradeat iti tarsali, gujarat, india (package 4: fitter trade) - ss and sc center lathe (all geared) , design, supply, installation, commissioning, testing and training of hydraulic / electro-hydraulic/ analysis and control of hydraulics. , design, supply, installation, commissioning, testing and training of pneumatic / electro-pneumatic/ analysis and control of pneumatic. , design, supply, installation, commissioning, testing and training of advance factory automation training kits , application learning systems , hydraulic power saw machine , cnc turn centre , universal milling machine with minimum specification , vertical milling machine , cnc machining centre , cnc milling tools to suit above machine (sl. no. 187): to accommodate face cutter, shell end mill cutter, taper shank and parallel shank drills/cutters, reamers. taps with suitable tool holders. , surface grinding machine , universal tool and cutter grinding machine , interchangeable ratchet socket set , hand reamer adjustable cover , hand reamer taper , reamer parallel , set combination , micrometer (0-25) , micrometer (25-50) , micrometer (50-75) , micrometer inside (0-25) , vernier calliper (150mm) , vernier height gauges , vernier bevel protractor , drill twist taper shank , drill chuck , wheel dresser , machine vice (4 inch) , machine vice (6 inch) , sleeve drill morse , bench vice , leg vice , dial test indicator , lathe tools hss tipped set , lathe tools bit hss , counter boring and counter sinking tool , arm strong type bit holder rh , arm strong type bit holder lh , arm strong type bit holder straight , straight edge , surface plate , marking table , universal scribing block , v- block pair , square adjustable , angle plate , spirit level , portable hand drill (electric) , twist drill straight shank , twist drill straight shank , taps and dies complete set , taps and dies complete set , taps and dies complete set in box , pipe wrench , pipe wrench , pipe vice , adjustable pipe tap set bsp with die set cover pipe size , wheel dresser(1for4units) , machine vice , machine vice , sleeve drill (morse taper) , bench vice , leg vice , gauge slip as johnson metric set , carbide wear block , gauge snaps , gauge plug single ended , gauge telescopic , dial vernier caliper , vernier micrometer , depth micrometer , vernier caliper , comparators stand with dial indicator , surface roughness comparison plates , digital vernier caliper , digital outside micrometer , digital dial test indicator , hardness tester , flat tongs , round tongs , straight snips , bend snips , solder bit /soldering iron hatchet type , anvil , swage block , trammel , hand groover , portable forge with hand blower , gas cutting torch with different noses , arc welding table with positioner , gas welding table with fire bricks , grinding attachment for lathe , dial test indicator , sine bar , sine bar , micron suitable to measure minimum 300mm distance. (optional) , surface roughness tester , air conditioner , drilling machine pillar type with drill chuck & key. , pedestal grinder double end type. , power saw machine stroke length160 mm , fly press 4t capacity , arc welding transformer-single phase,200 amps. (with cable, electrode holder and all other accessories) , oxy-acetylene gas welding plant with all accessories , tig welding machine , co-ordinate measuring machine having accuracy of 5 , workbench , special tools and equipment , tool holder to suit the cnc machine (sl. no. 183) for turning, threading (external &internal), grooving (external &internal), parting off operations, drilling, boring, undercutting (with 20 inserts for each operation) , worktable to mount small machines , worktable to mount small machines , worktable to mount small machines , work benches with bench vices , dg set (power backup) , engineering drawing trainees tool kit , air conditioning for classroom , air conditio

Ss Flat Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government