Latest ss inlay Tenders | Government ss inlay Tenders

State Government

CTN :41217191

11 Dec, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of mechanical measuring instruments & spanners (tools & tackles) at wtps - digital outside micrometer with large digital display. size : 0 - 25mm, resolution: 0.0001 mm., digital outside micrometer with large digital display. size : 25 - 50mm, resolution: 0.0001 mm., digital vernier calipers size - 0-300 mm mitutoyo make, allen key set black finish of mm series having sizes 1.5mm ,2mm,2.5 mm ,3mm ,4mm ,5mm ,6mm , 8mm , & 10mm allen keys, taparia make: allen keys (mm.sizes) black finish ,is 3082-1988 sizes- 12 mm,14mm, 17mm, 19mm, 22mm, 24mm, adjustable spanners , 110 mm length ,least max. opening 13 mm, chrome plated, with soft grip, chain pipe wrench, taparia product no: cpw 06, length:1000 mm, suitable for pipe dia. 150 mm, hss drill bit set 3 mm to 12 mm, weighing scale digital, polyester webbing slings with reinforced eye loop at both ends as per en 1492-1 size 125mm x 5t x 3mtr x red, polyester webbing slings with reinforced eye loop at both ends as per en 1492-1 size 125mm x 5t x 5mtr x red, copper round bar of size 40mm x5oo mm long, polyester flat belt webbing sling with plain eye loops at both ends, conf. to bs: 3481/part-ii capacity: 5 ton, std length: 5 mtrs, bolt cutter length-450 mm, chain pulley block cap-1 ton x3 mtr lift, chain pulley block cap-2 ton light weight, chain pulley block cap 3 ton, lift: 4.5 m, mitutoyo make dial gauge with magnetic stand : 0-10mm, steel wire rope sling with soft eye splice at both ends conf. to is: 5245/part-ii capacity: 10 ton, rope dia: 32 mm, std. length: 2 mtrs, taparia make t handle hex key. product no. tak 5., taparia make t handle hex key. product no. tak 6., torque wrench standard generally confirming to is 6789:2008 mac master product no-tw-2000r (range-1000-2000 lb.ft/135-275 kgf.m/1350-2700 n.m), torque wrench standard generally confirming to is 6789:2008 taparia product no-tw1000 (range-400-1000 lb.ft/55-140 kgf.m/540-1380 n.m), allen key set black finish of inch eries having sizes 1/16" , 5/64" ,3/32" , 1/8",5/32",3/16",7/32",1/4",5/16",3/8" allen keys, grease gun, polyester webbing slings heving specification capacity- 1tons,length-3mtr and width-50mm (max), screw spanner-12", non sparkable fixed spanner set : size: 6x7,8x9,10x11,12x13,14x15,16x17,18x19,20x22,21x23,24x27,25x28,30x32., fix spanner size 12x13 mm ., ring spanner size 12x13 mm, fix spanner size 10x11 mm, jhalani/tapariaring spanner 10x11 mm, fix spanner size 14x15 mm jhalani make, fix spanner 16x17 mm, jhalani/tapariaring spanner 16x17 mm, fix spanner 18x19 mm, jhalani/tapariaring spanner 18x19 mm, fix spanner size 24x26 mm, ring spanner size 24x26 mm, fix spanner 30x32 mm, ring spanner 30x32 mm, steel wire rope sling with soft eye splice at both ends, conf. to is: 5245/part-ii capacity: 1 ton, rope dia: 10 mm, std. length: 3 mtrs, steel wire rope sling with soft eye splice at both ends conf. to is: 5245/part-ii capacity: 2 ton, rope dia: 16 mm, std. length: 3 mtrs, steel wire rope sling with soft eye splice at both ends conf. to is: 5245/part-ii capacity: 5 ton, rope dia: 22 mm, std. length: 5 mtrs, circlip plier external (bent nose),product no: 1444.7,capacity :19.6 mm, length:180 mm, taparia or jhalani or any equivalent make, internal circlip plier size 8" no1440 taparia make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, hanna make tds tester (0-2000 ppm), model: hi98301, hanna make ph meter, model: hi98107

CTN :42842817

10 Dec, 2025 16.90 Lacs

Chhabra - Rajasthan

Tender For corrigendum : supply of spare/accessories items of two nos. multi-purpose fire tender(rj-28ea-0956 and rj-28- ea-0957)against tn-sc-638/2025-26(mm) - high pressure hose reel with 60mm lg x 19 mm ( ) with fog gun and spray type, low pressure hose reel with 19 mm x 50 mm long hose with duel purpose shut off nozzle., extension ladder 10.5 meter, delivery hose 63 mm rubber lined in 30 m length (type b of is 636/79/5) complete with instantaneous coupling., long line 50 mm circumference 30 m long as per is 1084., short line 50 mm circumference 15m length as per is 1084., protective clothing for fireman complete with golves, boots, helmets with suitable face shield mad out of material capable of reflecting at least 95% of radiant heat temperature around 1500 to 2000 degree celsius and also afford some protective against direct flame. the suit will be of sufficient size to accommodate a breathing apparatus to users (item should be packed in hard body box)., fire hook, fire man axe, sledge hammer, carpenter saw, pick axe, celling hook, crow bar made of carbon steel, self contained breathing apparatus (45 min duration compressed air type) complete with spare cylinder & tool kit), dividing breeching, collecting breeching, pvc suction hose heavy duty complete with copper alloy round threaded couplings to suit the pump inlet - 2.5m long., suction strainer for item 2, basket strainer suitable for item 4 , is : 3582, dividing breaching with control arrangement as per is : 5131, collecting breaching as is : 905, hose bandages rubberized is : 5612, hose clamps is : 5612, water curtain nozzle made of m .s .plate with g . m instantaneous connection, branch pipe short ( chromium plated) is : 903, a set nozzle of sizes 12 mm , 16 mm , 20mm , 25 mm and 32 mm ( two each ) ( see is : 903 - 1975 * t ), adapter for 100mm suction female thread and 63mm male instantaneous, adaptor double female instantaneous pattern 63mm ., adaptor double male instantaneous pattern 63mm, hand lamp ( 4cells ), rubber gloves 33kv 1 pair, fire beater, foam pick up tube, rubber gloves as per is 4770 - 1991 for 5000 volts, leather gloves is 6994 1977, jack hydraulic for 20 ton capacity with handle, hand controlled branch for 63 mm size hose coupling, hand held fast action select flow nozzle :-the selectable flow rate multipurpose nozzle should have a multiple flow setting. this product be of light in weight and easy to handle. weight of the nozzle should not be more than 2 kg. the calibrated flow rates are easily selectable through an selection ring. the stream patterns should be changed by rotating the diffuser head ring. nozzle should be having pistol grip, shut off ball valve opening and made of aluminum alloy., bolt cutter 600mm long, shovel with handle, minimum 12v halogen fog & spot lamps, hose ramp

State Government

CTN :42975278

15 Dec, 2025 3.00 Lacs

Rajgarh-Mp - Madhya Pradesh

Tender For purchase of furniture items - officer table :- providing and supplying table of size 5 x2 6 x2 6 with c-frame leg 200 mm wide made of aluminum profile and crca formed section having provision for wire management. top made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminate, wooden edge banding of edges. dotted embossed cable duct and with single drawer (w-350 mm, h-165 mm, d-475 mm) with branded telecopic channel. all steel components are epoxy powder coated after seven tanks. anti-corrosion., officer chair :- supply and placing high back revolving chair size total height 1030-1115 mm, depth 685 mm width 590 mm seat hight 425-510 mm, 5- prong nilony base for stability twin wheel heavy duty caster for easy mobility under load hot pressed plywood with steel t-nuts for rigid fasting seat and back are covered with pp cover, sturdy steel colum gas lift for center support and seat height adjustment, telescopic abs cover over steel colum low cable center tilt mechanism and with single piece integral center tilt mechanism and with single piece integral skin pu arm rest, quality tapestry high density molded pu cushion., staff chair :- supply and placing staff chair size total height 850 mm depth 570 mm, width 550 mm seat hi=eight 440 mm, uinder structure cantilever type ms crca tube 1.6 mm thick. hot pressed plywood with steel t-nuts for rigid fastening. single piece integarl skin pu arm rest. quality tapestry. high density pu molded cushion. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface., waiting chair :- supply and placing waiting three seater fixed chair, size ; total length 1800 mm, total height 750 mm, total depth 630 mm and seat height 410 mm, made of ms crca press formed seat components duly seamless welded to get proper finish chrome plated handles & base. steel perforated ms moulded one piece seat and back fitted in moulded chrome plated side strips, three individual seat fitted on ms tube support of 75 mm x 35 mm, seat and bottom support are powder coated., computer table :- supply and fixing in position computer table (work station) having size length 900 mm, width 600 mm, height 760 mm, c-frame & tubular crca steel structure, fabrication involves only mig/tig & spot welding. top & shelf made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminated, wooden edge banding of edge, shelf adjustable on steel brackets. removable tubular cpu stand and an embossed modesty panel below table top provided. provision for wire management, drum type leveler. all steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface., plastic chair:- plastic arm chair for office, godrej almira :- godrej interio almira slim size 2 door steel almira, 4 shedves, size length 1828 mm, width 914 mm, water cooler :-cooling capacity- 5 ltr./hr.number of taps- 2color- whiteweight- 10 kg., cash counter:-office reception table & cash counter desk of woodenproduct dimensionslength 48 , width 24 , height 36 approx., record rack :-material- mild steelno. of shelves- 5 shelvesmount type- finish type color- greyusage/application- officerack type- open rackappearance- modernproduct type- pre standing unitassembly required- no, bench :- product dimensions12d x 48w x 18h centimetersmaterial- stainless steekframe material- stainless steelcolour- silverstyle- antiquesize- 48"l x 12.3"w x 18"h overall size: 48"l x 12.3"w x 18"h, digital electronic safe locker for office with auto lock function, anti-theft alarm and led displays size length 500 mm width 350 mm

CTN :42976601

16 Dec, 2025 NA

Howrah - West Bengal

Tender For supply of 1. magnetic stand similar to mitutoyo model 7010s10, dial indicator similar to mitutoyo model no: 2109s-10. graduation: 0.001 mm, along with nabl/govt. approved source calibration certificate. make: mitutoyo/precision germany/baker/forbes/similar.2. bore gauge digital indicator, range: 50 mm - 150 mm with least count: 0.001 mm as per product code no. 511703 plus 543790 of m/s. mitutoyo make or its equivalent in m/s. stanley/ insize/ baker/ forbes/ fowler/ precision germany makes supplied along with nabl calibration certificate. features: (1) dial indicator and dial protection cover must be provided. (2) extension rod must be supplied for measuring deep holes. (3) wide measuring range with interchangeable washer & sub-anvils to be provided. (4) a carbide ball is used for the contact point & it is more abrasion resistant than a hardened steel ball.

CTN :42859015

12 Dec, 2025 NA

Bhopal - Madhya Pradesh

Tender For online tender for gym goods - olympic bench press (flat/ incline/ decline)-, olympic bench press (flat/ incline/ decline)-specification- olympic size suitable to use with olympic rods plate storage should be available on sidesproduct should of international standard. physical demonstration of equipment may be required to access the quality standards., lat pull down machine, lat pull down machinespecification- independent diverging press arms, and adjustable thigh pad wt. stack(min) 180lbs. instruction card to show how to use the machine. floor bolt down option for stabilityproduct should of international standard. physical demonstration of equipment may be required to access the quality standards., heavy duty commercial treadmill-, heavy duty commercial treadmill-specification- commercial treadmill , with shock absorption system, must have 8-10 individual shock absorbers. shock absorbers should not be made of rubber or urethane , rustproof, aluminium side rails and end caps, integrated speed and incline buttons should be available on user handles, side handles length: 23-25inch, to provide secure feeling while running at high speed. running belt with multi ply minimum 58 (l) x 20 (w) running surface. running belt should have incorporated technology for straight tracking, ideal gripping texture surface, must consume lower power. speed range: min 0.8kph to 20kph. incline range: min 0% to 15% (0.5% increments).rollers: 3.4 - 3.5" precision crowned steel rollers - front & back.motor capacity: min 3 hp ac continuous duty .heart rate: support both digital [contact electrodes] & polar , transport wheel for easy mobility. tray: must feature removable/lockable anti-theft cup holders 2nos, integrated accessory tray. frame: robust paint (corrosion, stain, and chemical resistant coating). maximum user weight: 175-185kg . display console: should have led display with digital readouts. demonstration of machine may be required for technical evaluation. certificate of origin may be asked. machine should be produced only in us/europe with high quality standard., chest machine, specification- independent converging arms wt. stack(min) 180lbs. instruction card to show how to use the machine. floor bolt down option for stability product should of international standard. physical demonstration of equipment may be required to access the quality standards., commercial elliptical cross-trainer :-, specification- commercial cross-trainer. must have different independent handles to offer both total body & lower body workout. moving handle must have multi grip function with integrated resistance keypads. pedals: must be oversized [12-16inch] with flex foam cushion. large knee clearance area to accommodate taller user. stride length: fixed stride length in the range 18-21inch. unit must be self powered with inbuilt generator & battery. resistance range: 20. step up height: 9-10inch. heart rate: support both digital [contact electrodes] & polar. transport wheel for easy mobility. frame: robust paint (corrosion, stain, and chemical resistant 3coating). maximum user weight: 175-185kg. demonstration of machine may be required for technical evaluation.certificate of origin may be asked. machine should be produced only in us/europe., dumbbells with dumbbell rack: -, dumbbells with dumbbell rack: -specification- rubber coated hex style fixed dumbbells, proper handgrip in 2.5kg, 5kg, 7.5kg, 10kg, 15kg, 20kg pair each. storage rack with proper design to store dumbbells (2 tier), electro statically powder coat finish., dumbbells with dumbbell rack: -, specification- commercial shoulder press biomechanical correct movement to target shoulder muscles. wt. stack (min) 170lbs. machine should have adjustable seat for adjusting range of motion. frame: powder coated, corrosion, stain, and chemical resistant coating instruction card to show how to use the machine. should incorporate counter balance weight for low starting resistance. product should of

CTN :42895992

15 Dec, 2025 10.00 Lacs

Ujjain - Madhya Pradesh

Tender For supply of dual desk for government iti of ujjain zone - furniture, dual desk - overall dimensions:- l:-1054 x w980 x 760 mm ht. knock down class room dual desk is (plpb) edge. hanger for water bottle and bag. space for keeping pen, pencil and scale. the overall appearance of the product shall be as per photograph. top- injection moulded plpb edge. size:- 1054x450x18 mm thk. plpb.seat-injection moulded plpb edge. seat height :- 450 mm, seat size:- 1054x304x18mm thk. plpb. back injection moulded plpb edge. back size :- 1054x 154x18 mm thk. plpb. shelf - shelf 0.8 mm thk. crca sheet. bullnose front edge with stiffener | mm thk crca. modesty-modesty 0.8 mm thk: crca sheet. square perforation. tie members- horizontal tie member 25x 25 x 1.6mm the. crca pipe. for rigid joint of frame structure threaded 4mm thick sleeve welded in tie members. round pipe & tie members joined together via notching in square pipe for matching of profile on round & square pipe in seat & back. footrest- footrest pressed formed crca section 1.5 mm thk. side frame -side frame section in bullnose edge taper, pressed formed 1mmthk. crca sheet welded with 25x50x1.2mm the tube. back rest pipe 25 x 1.6 mm thk. back rest upper mouth has been closed in metal cap shape with heat induction for avoiding sharp edges. cap & levellers - all in pipe caps are curved plpb material. provision for levellers in the cape 4 no.s of pvc grommet has been provided at bottom for preventing scratched on floor & product as well. construction: the product comes in knock down conditional for ease of transportation. finish - no sharp edges in the product. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface and product should look as per the photograph.

CTN :42903953

08 Dec, 2025 NA

Dewas - Madhya Pradesh

Tender For providing and fixing gym item in balaji nagar at ward 42 dewas - items :, double chest press product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., leg press double - product area :-1676mm x610mm x 1524mm safe playarea:- 2286mm x 1220mm leg press equipment made up of4inch b class gipipe; prime stand duly bend,9506 13800038000foundation center pipe. the remaining frame is made of42mm od g.i. pipe. ms seat of size 380mm x 300mm x5mm is used. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness., shoulder press / double chest cum -product area :-1372mm x762mm x 2134mm safe playarea:- 1828mm x 1220mm double chest presser equipmentmade up of 4inch b class gi pipe;prime stand duly bend, foundationcenter pipe. the handle frame is made of 42mmod g.i. pipe. the remaining frame is made of32mm od g.i. pipe. seating frame support of dimension250 x 150 x 5mm iswelded for supporting the pedal seat. ms seat of size 380mm x 300mm x5mm is used forsupporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings9506 14500045`0006205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high quality rubber grip are also usedfor firm handling. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tightenthe closing cap. closing cap of hdpe / ppcp plastic isused. the powder coating done with purepolyester powderwith 60 to 70 micron thickness.seating puller, sky walker / straight trainer/crosstrainer -product area :-l x w x h1778mm x 610mm x 1828mmsafe play area:- 2134mm x 915mm straight trainer/sky walkerequipment made up of 4inch b class gi pipe; prime stand dulybend, foundation center pipe. the pedal frame is made of 3" x 1"rectangular g.i.pipe. the handle frame is made of 32mmod g.i. pipe. footrest frame support of dimension250 x 100 x 2mmis welded for supporting the aluminiumfootrest. aluminium footrest of size 300mm x150mm x 5mm isused for supporting the foot. 60mm seamless pipe bushes. permanent lubricated ball bearings6205zz/6205-2rs. foundation plate of dia 225mm and10mm thicknessis welded at bottom. all welded joint are of good quality. high tensile steel with galvanized nut& bolts to beused. the circlips to be used are of 25mm. allen bolts are also used to tighten9506 14000040000the closing cap. closing cap of hdpe / ppcp plastic isused. high quality rubber grip are also usedfor firm handling., double air walker - product area :-2130mm x785mm x 1390mm safe playarea:- 2590mm x 1024mm double air walker equipmentmade up of 4inch b class gi pipe;prime stand

Central Government/Public Sector

CTN :42916917

16 Dec, 2025 NA

Ratlam - Madhya Pradesh

Tender For tender for supply of customized wallpaper, cotton curtain strip (curtain lace) widht-1 inch suitable for curtain runner cum hook, white colour, double layer curtains - 1. (size-26feet x 7feet-02nos.-26meter)2. (size-06feet x 5feet-04nos.- 13meter) 3. (size-14feet x 6feet-01nos.-9meter)4. (size- bfeet x 6feet-01nos.-5meter), office table for lmnr with side storage and as per attached technical specification, office table of three layer pre laminated particle board (wood product) of grade ii type ii of is 12823/latest. size (1500 x 750 x750)mm. make/brand:- godrej, dice, hoc., executive office table with side table 1 set, ms almirah for counter of height 6.5 feet and 4 feet wide make -godrej or as similar as per estimate., steel locker almirah, sofa set (3+1+1-seater) made of a sturdy wooden structure, covered with fabric or leatherite and cushioned for beautification and enhanced durability. approximate dimensions: 3-seater: 66 (l) x 32" (w) x 32" (h) single seater (each): 32" (l) x 32" (w) x 32" (h) handrest height from ground level (base): minimum 21, mattress, metal bed with mosquito net frame & shoes stand., wooden shoes rack, tool & material storage rack as per attached technical specification, curve shape in centre transparent glass with edge finish and moulding (size-72" x36"=2nos., size-24" x45"= 1nos, size-27" x54.6" 1nos.) thickness 8mm, office cum visitor chair non-revolving and non tilting chair with arm rest. make/brand: dice, abm or as similar, office cum visitor chair non-revolving and non tilting chair with arm rest. make/brand: dice, abm or as similar, office cum visitor chair non-revolving and non tilting chair with arm rest. make/brand: dice, abm or as similar, office cum visitor chair non-revolving and non tilting chair with arm rest. make/brand: dice, abm or as similar, executive revolving chair with cushion sheet high back make/brand: abm, dice or as similar., executive revolving chair with cushion sheet high back, make/brand: abm, dice or as similar., revolving chair ofhigh back with centertilt mechanism. make-, dice office systemsor as similar, visitor chair made of teak wood and cushioned on the seating and back. make - nilkamal or as similar, office chair as per technical specification attached., visitor cum office chair non-revolving and non-tilting chair with armrest as per technical specification attached, fly catcher, looking mirror (full size)

Central Government/Public Sector

CTN :42918743

16 Dec, 2025 NA

Ratlam - Madhya Pradesh

Tender For tender for supply of (glapcell-excel 41% s.l. (systmic), herbicide or pesticide india limited glaphosate41%s.l. accepted or similar. accepted make/brand-nasak-wip, non-destructive testing penetrants, group 'l' conforming to is 12889-1989 (reaffirmed 2000) with non-aqueous wet developer. packing: each set comprising three items in six cans in the ratio 1:2:3 the penetrant remover & developer all in aerosol cans of 500 ml capacity each. the material content in each aerosol can should be 80 +/- 3% by volume & the ratio of the product to the propellant 3:1 +/-3%., refill for automatic hygiene odour controllers, (ahoc) aluminium can refill with metallic nrv size, 120x45 mm (hxd) approx., capacity 100 ml with 3000, metered doses of mal-odour eliminator &, fragrance from, stainless steel dining table with 06 chair (foldable)., kitchen utensils set as per attached annexure., dinner set (31 item) make/brand:-milton or as similar., tea set clay craft, drinking water glass set. (6 nos.) make/brand:- borosil/cello or similar, cello polypropylene sipper bottle 2100 ml cello., novafitness belt 100-240v +/- 10%, 50/60hz upright exercise bike details/specification as per annexture-a and gem portal id 5116877-65051697684, vector x nyton skipping rope of length 3 meter, rope material-nylon handle material- pvc, rope length (in meter)-3 rope thickness (in mm)-7, handle length (in mm)-160 handle diameter (in mm)-20, features-anti slip handle, adjustable rope length, tangle free details/specification as per attached gem portal id 5116877-38627308420, kitchen utensil set as per budgetary quotation.

State Government

CTN :42756421

05 Dec, 2025 NA

Rupnagar - Punjab

Tender For purchase of gym for strength and conditioning equipments - power racks, length minimum 1865 mm width minimum 1815 mm height minimum 2140 mm product weight 275 kg or more.max training weight 350 kg or more live arena 3x3 meterframe construction: heavy-duty steel construction for durability and stability during heavy lifting. made up of 75 mm x 75 mm square tubes size with 3mm thickness or more.the frame provides tighter 50 mm hole spacing and a long-lasting finish optimized for gliding attachments.power rack must have inbuilt 3 handle pull up bar, designed for veracity. the three handle pull up bar features 32mm hand in mixed configuration for supreme ergonomics. large six weight horns collars for convenient weight plate storage of four small horns. (standard six large horns). single bar hanger, double side hook for bar holder, adjustable support arm with locking features.warranty minimum 10 years on structural frame, minimum 2 years on wear and tear parts and minimum 1 year on upholstery for stitches and fixing, as applicable.the quoted brand and model must have all three valid regulatory certificates: en 957-6:2010+a1:2014, bs en iso 20957-2: 2021, and astm f1749.note: the bidder/oem must possess all four valid certifications: iso 9001:2015, iso 14001:2015, iso 45001:2018, and iso 10002:2018.the vendor must provide detailed information about these certifications along with appropriate justification., inserted platforms, length minimum 4415 mm width minimum 1095 mm thickness of wood 30 mm.dimensions of rubberized platform :length 1100 mmwidth 670 mmthickness of rubber 30 mm.feature: must have inserted wooden platform size as mentioned above, non slippery rubberized platform on both sides outside the rack as per sizes mentioned above. should be attaching snugly to the rack frame to create a complete lifting station.platform must be made of sealed plywood 30mm thick with rubber mat 30 mm thick, perfectly covered boundaries into a metal frame of 30 mm x 60 mm sq tube of 3 mm thickness. platform sheet metal should be a minimum 1.2 mm thick.it should be compatible with the specified power rack (as mentioned above) and should fit into the power rack without any gaps.warranty minimum 10 years on structural frame, minimum 2 years on wear and tear parts and minimum 1 year on upholstery for stitches and fixing, as applicable.the bidder/oem must possess all four valid certifications: iso 9001:2015, iso 14001:2015, iso 45001:2018, and iso 10002:2018.the vendor must provide detailed information about these certifications along with appropriate justification., platerform, length minimum 2090 mm width minimum 2460 mm height minimum 105 mm weight minimum 290 kgcompact footprint, reduce sound and vibration 1.8x quieter than 30 mm tiles.the platform should have efficient sound vibration reduction quality that helps to create inviting strength training environments by reducing the sound and vibration from dropped barbells and weights and clearly defining the lifting space for members, improving safety and facility flow.the custom multi-layered wood deck should be protected with a non-slip, hard wearing laminate and an inlaid rubber strip to guard deck edges, bumpers and plates from damage.solid construction with durable, high-quality materials stands up to heavy use in sports.warranty minimum 10 years on structural frame, minimum 2 years on wear and tear parts and minimum 1 year on upholstery for stitches and fixing, as applicable.the bidder/oem must possess all four valid certifications: iso 9001:2015, iso 14001:2015, iso 45001:2018, and iso 10002:2018. the vendor must provide detailed information about these certifications along with appropriate justification., landmine, plate mountable landmine length 335 mmwidth 81 mmheight 65 mmweight minimum 2.8 kgwarranty minimum 10 years on structural frame, minimum 2 years on wear and tear parts and minimum 1 year on upholstery for stitches and fixing, as applicable.the bidder/oem must possess all four

Ss Inlay Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government