Latest ss stool Tenders | Government ss stool Tenders

State Government

CTN :42975278

19 Jan, 2026 3.00 Lacs

Rajgarh-Mp - Madhya Pradesh

Tender For corrigendum : purchase of furniture items - officer table :- providing and supplying table of size 5 x2 6 x2 6 with c-frame leg 200 mm wide made of aluminum profile and crca formed section having provision for wire management. top made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminate, wooden edge banding of edges. dotted embossed cable duct and with single drawer (w-350 mm, h-165 mm, d-475 mm) with branded telecopic channel. all steel components are epoxy powder coated after seven tanks. anti-corrosion., officer chair :- supply and placing high back revolving chair size total height 1030-1115 mm, depth 685 mm width 590 mm seat hight 425-510 mm, 5- prong nilony base for stability twin wheel heavy duty caster for easy mobility under load hot pressed plywood with steel t-nuts for rigid fasting seat and back are covered with pp cover, sturdy steel colum gas lift for center support and seat height adjustment, telescopic abs cover over steel colum low cable center tilt mechanism and with single piece integral center tilt mechanism and with single piece integral skin pu arm rest, quality tapestry high density molded pu cushion., staff chair :- supply and placing staff chair size total height 850 mm depth 570 mm, width 550 mm seat hi=eight 440 mm, uinder structure cantilever type ms crca tube 1.6 mm thick. hot pressed plywood with steel t-nuts for rigid fastening. single piece integarl skin pu arm rest. quality tapestry. high density pu molded cushion. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface., waiting chair :- supply and placing waiting three seater fixed chair, size ; total length 1800 mm, total height 750 mm, total depth 630 mm and seat height 410 mm, made of ms crca press formed seat components duly seamless welded to get proper finish chrome plated handles & base. steel perforated ms moulded one piece seat and back fitted in moulded chrome plated side strips, three individual seat fitted on ms tube support of 75 mm x 35 mm, seat and bottom support are powder coated., computer table :- supply and fixing in position computer table (work station) having size length 900 mm, width 600 mm, height 760 mm, c-frame & tubular crca steel structure, fabrication involves only mig/tig & spot welding. top & shelf made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminated, wooden edge banding of edge, shelf adjustable on steel brackets. removable tubular cpu stand and an embossed modesty panel below table top provided. provision for wire management, drum type leveler. all steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface., plastic chair:- plastic arm chair for office, godrej almira :- godrej interio almira slim size 2 door steel almira, 4 shedves, size length 1828 mm, width 914 mm, water cooler :-cooling capacity- 5 ltr./hr.number of taps- 2color- whiteweight- 10 kg., cash counter:-office reception table & cash counter desk of woodenproduct dimensionslength 48 , width 24 , height 36 approx., record rack :-material- mild steelno. of shelves- 5 shelvesmount type- finish type color- greyusage/application- officerack type- open rackappearance- modernproduct type- pre standing unitassembly required- no, bench :- product dimensions12d x 48w x 18h centimetersmaterial- stainless steekframe material- stainless steelcolour- silverstyle- antiquesize- 48"l x 12.3"w x 18"h overall size: 48"l x 12.3"w x 18"h, digital electronic safe locker for office with auto lock function, anti-theft alarm and led displays size length 500 mm width 350 mm

corporations/Associations/Others

CTN :42485358

21 Jan, 2026 55.80 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type c (qty:10) - digital radiography system 50kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

corporations/Associations/Others

CTN :42485371

21 Jan, 2026 75.33 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type b (qty:10) - digital radiography system 80kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

CTN :43547065

27 Jan, 2026 NA

Kapurthala - Punjab

Tender For supply of fully plastic moulded chair with arms seat andback cushioned , executive table or office table , laboratory or library or canteen table , computer table , computer and printer table , conference room table , chemistry lab table , foot rest , laboratory table with boxes , laboratory table with drawers , revolving chair big , revolving chair small fully plastic moulded chair with arms (seat &back cushioned)-size - total height : 820mm + 10mm, total width : 565mm + 10mm, total depth : 565mm + 10mm &total weight: 4. 20 kg + 50gms cushioned chair with arms comprising of single piece moulded frame made of polypropylene & coated with pu coating paint high gloss finish with seat & back cushion made of moulded pu foam and velvet upholstery. weight of moulded polyproplene frame is 4. 2 kg. , executive table/office table-made up of injection moulded polypropylene. d). leveler glide for leg : leveler should be made of nylon 6 & consist of ms bolt. storage: storage should consist of pedestal. the pedestal should further consist of a). shell which should be 0. 6mm thick crca (is:513) and should have powder coat (epoxy polyester) as finish. b). drawer tray which should be 0. 6mm thick crca (is:513)and should have powder coat (epoxy polyester) as finish c). drawer front which should be 0. 8mm thick crca (is:513) and should have powder coat (epoxy polyester) as finish d). frame assembly which should be 1. 2mm thick rca (is:513) and should have powder coat (epoxy polyester) as finish. e) lock which should be 10 lever cam lock f). handle which should be made of injection moulded polypropylene g). leveler which should be made up of nylon 6 and should also consist of ms bolt ) /bid number: gem/2026/b/7096951 * /dated: 12-01-2026 & & / bid document1 / 23powder coating process: all the metal parts shall be given antirust surface treatment and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a controlled temperature of 180 c to 200 c. manufacturer / supplier must have iso- 9001, 14001, bifma & ohsas certifications. , laboratory/ library/canteen tableoverall size: 1800 mm (w) x 900mm (d) x 740mm(h) +10mm tolerance on overall sizes. frame:legs of table frame should be made of erw round pipe of 48mm+1. 0mm and 1. 5mm thick(min) supports shall not be more than 160mm from the floor level when measured frombottom of pipe two supports of the same pipe should be provided breadth wise in between thelegs of the frame and two supports should also be provided length wise between legs supports are welded to each other properly. the frame top should be made of ms angle iron size38mmx38mmx5mm(min. ). the bottom of legs should be closed with metal shoes. top:top should be made out of 18mm +-1. 0mm commercial board fixed with good quality sunmica 0. 75mm thick. shade of sunmica top should be natural teak/ baverian beach. all the edges of the sunmica top should be fixed with teak beading duly spirit polished. finish all steel components are to be prepared for degreasing and derusting. after pretreatment,the steel steel components are to be epoxy powdercoated. thickness of powder coatingshould be 50-60 micron (min). shade of powder coating should be nickle grey/ seimn grey. , computer table-computer table should have dimensions (mm) 900 x 750 d x 730 with +- 10mm tolerance on overall sizes. the computer table should consist of following components. tops should be made up of 25mm thick pre laminated particle boards with machine fitted pvc edge banding on all sides. understructure should be made of 50. 8 x 25. 4 mm x 1. 25 mm thick powder coated erw tubes at base which should welded to the vertical channels which

CTN :43521839

24 Jan, 2026 NA

Badal - Punjab

Tender For supply of workshop machinery d d -anvil 50 kg with stand , carpentry bench vice , open hearth furnace with electric motor , swage block , leg vice , surface plate ci 12 inches by 18 inches with fabricated stand , wood working lathe , seam welding set , arc welding table , gas welding table

Central Government/Public Sector

CTN :43162728

13 Jan, 2026 NA

Ranga Reddy-T - Telangana

Tender For bid to ras bid to ras corrigendum : supply of surface table

Central Government/Public Sector

CTN :43237032

15 Jan, 2026 2.98 Crore

Gurgaon - Haryana

Tender For corrigendum : supply of dual desk size of height 650mm , dual desk size of height 750mm , principal table , vice principal table , office table , teachers table , meeting table , library table , computer work station , one side book shelf , steel glass door almirah , steel almirah , sofa set includes - 1 no. 2 seater sofa and 1 no. of 3 seater sofa , sofa set includes - 2 nos. 2 seater sofa , duplex bunk bed , metal table with integrated storage for two students , metal table with integrated storage for single student , 8 seater ss top fixed canteen table 2400 x 750 , 6 seater ss top fixed canteen table 1800 x 750 , lab stool , high back chair , medium back chair , visitor chair , chair without arm 420 w x 410 d x 440 h x thk 12mm , chair without arm 480w x 420d x 820h , personal locke unit , magnetic white board- 6 x 4 , melamine surface non-magnetic chalk board-6 x 4 , ss stock pot range of size 24 x 24 x 26 , ss 2 burner indian cooking rnge of size 44 x 24 x 34 , ss single sink unit of size , ss tiltting type bulk cooker of 200 ltrs , ss tiltting type boiling pan of 200 ltrs , ss spice trolly of size 18 x 24 x 34 , ss work table with 1 bs of size 44 x 24 x 34 , chapati hot plate of size 52 x 26 x 34 , semi automatic chapati making machine of size 82 x 77 x 50 , conveyor type toster of standard size , ss 4 door vertical chiller of size 48 x 28 x 78 , deep freezer of 500 ltrs , dry masala grinder of 5 kg , pulveriser of 2 hp , dough kneader of 20 ltrs , ss 6 vessel hot bain marie of size , ss 6 vessel bain marie of size , ss platfrom trolly of size 34 x 24 x 34 , ss kitchen utility trolly of size 34 x 24 x 34 , ss pot rack - 4 shelf of size 60 x 30 x 66 , ss storage rack - 4 shelf of size 44 x 16 x 66 , pvc pallet of size 48 x 40 x 8 , potato piller of 20 kg , ss hood with ss filter of size 54 x 30 x 24 , ss hood with ss filter 304 grade of size 36 x 30 x 24 , gi ducting for hot air suction of 50 ft approx , gi ducting for fresh air intake of 3 hp centrifugal , cylinders lpg gas manifold system complete set , lpg pipe line complete system

CTN :43469894

20 Jan, 2026 23

Channapatna - Karnataka

Tender For selection of supplier/ dealer/ manufacturer for supply of equipment/ machinery for crafts based resource center at channapatna crafts park, channapatna - surface planer machine , thickness planer machine( portable ) , table router , spray gun for coloring , drilling machine , blade grinder machine, band saw machine , jig saw machine , hand router , hand drilling machine , hand jig saw machine , random orbital sander , sliding miter saw , wood cutting machine ( table circular saw ) , belt and disc sander

CTN :43461722

20 Jan, 2026 11.00 Lacs

Bagepalli - Karnataka

Tender For tractor engine capacity cc 2858 or above type of fuel diesel vehicle emission compliance bharatstage tremiiia max engine power 39hp engine rp mat maxpower 1800 maximum enginetorque nm 180 engine rp mat maxtorque rpm 1200 power take off pto type transmission maximum pto power hp 36 72 rp mat maximum pto power 1800 operator station 800 engine aspiration system open station engine cooling natural fuel in jection water cooled fuel tank capacity ltrs inline length of tractor body mm 55liter width of tractor body mm 3770 millimeter ground clearance mm 1725 millimeter wheel base mm 410 millimeter size of front tyre with plyrating mm 1960 millimeter size of rear tyre with plyrating mm 6 00 x 168pr track width front mm 13 6 x 2812pr track width rear mm 1280 millimeter tractor transmission system 1360 millimeter number of forward gears setting partial constant mesh type of wheeldrivetwo wheel drive drive axle rear type of steering manual tractor brake dry discbrake type of clutch dry clutch clutch operation single lifting capacity at hitch point kg 1200kilogram turning radius mm 3600millimeter trailer type of trailer semi trailer singleaxle type of platform tipping platform capacity of trailer 5 tonnes type of axle assembly class b axle assembly wheeltrack mm 1500 number of wheels 2 operating pressure 13 8 tipping angle of body indegrees incase of tippingtype 42 5 dimensions overall width of trailers between extreme points meter 1 83 meter overall length of platform 3 05 meter overall height of trailers with tyre inflated from the supporting surface ground to top of platform meter 608 inch overall height of trailers with tyre inflated from the supporting surface 0 915meter ground clearance mm 300 meter construction parameters material used for fabrication of trailer as per clause 5 table 1ofis 8213 latest yes reto reflective marking tapesas per ais 090 yes lighting and lighting signalling device as perais 0 62 yes trailers shall be fitted with rear under run protective yes device rupd confirming to 4812 latest yes trailers shall have service and parking brake as perais 043 nomaximum load transfer from trailer to load toweye of trailer yes 20percent of trailer capacity isi marked ismc channel used for fabrication of chassis and frame mounting on chassis yes no of spring leave splates fitted nos 1 lashing hooks for towing download yes no of hooks 8 type of towing device paintedcolouronthetrailersasper ais 112 red one coat of red oxide and 2coat of super synthetic enamel paint yes the price should include the insurance and registration charges of the vehicle

CTN :43202781

13 Jan, 2026 NA

Imphal - Manipur

Tender For corrigendum : tender for supply of advanced ventilator workstation , double surface led phototherapy unit , neonatal intensive care incubator , infant radiant warmer , defibrillator with aed , syringe infusion pump , infusion pump , portable ot light , abg (table top) , abg (handheld) , portable 12 channel ecg , cidex chamber , autoclave , instrument boiler , double doom ot light

Ss Stool Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector