Latest ss union Tenders | Government ss union Tenders

corporations/Associations/Others

CTN :43261557

26 Dec, 2025 7.15 Lacs

Coimbatore - Tamil Nadu

Tender For tiruppur corporation_z1_gf_maintenance and special repair work and providing and fixing of equipments tools and plants to the micro compost centre at athupalayam in ward no 10 - supply and fixing of sanitary napkin destroyer machine machine with storage capacity of 100 napkins per day with dimension of 220mm x 220mm x 360mm of wall mounting style no 1 pcs etc., complete., supply and fixing of pest controller of 64w with 360 inser killer etc., complete., dismantling the existing plain cement concrete including removing the debris from the site and stacking useful material at work site for reuse etc., complete complying with standard specification., earthwork excavation for foundation in all soils and sub soils except in hard rock requiring blasting and depositing on bank with initial lead of 10m and initial lift of 2m inclusive of shoring, shuttering, bailing out water wherever necessary, refilling the foundation with excavated earth other than sandy soil in layers of not more than 150mm thick layers well rammed and depositing the surplus earth within the compound in place shown by the departmental officers and clearing and levelling the site etc,. complete., plain cement concrete 1:4:8 [one cement, four m-sand and eight course aggregates] using 40mm size hard broken/machine crushed granite stone jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification., supply and delivery fixing of pvc chamber 2way 90 with cover size of 315mm x 110mm with chamber riser size of 315mm x 200mm including transporting etc.,, chambers, riser, plastering with cement mortar 1:4 mix (one cement four p-sand), 20mm thick in all floors using clean screened m-sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification., plastering with cement mortar 1:5 mix (one cement five p-sand), 12mm thick in all floors using clean screened m-sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification., painting two coats with ready mixed plastic emulsion paint (weather proof) of approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt and including necessary plaster of paris, putty wherever required etc., complete as per standard specifications., wring with 2 x1.5 sqmm (22/0.3) pvc insulated sc unsheathed cu conductor of 1100v grade in suitable pvc rigid pipe concealed in wall and ceiling with pvc accessories in flush with wall with 3mm thick hylum sheet cover with tw switch box and 5a f.t switch with continous earth wire connection of 14 swg tc wire for making good of the concealed portion with suitable color of pvc concealed light point / fan point (for electronic regulator ), supply and fixing of 200w 4 feet led fitting as per standard specificatin., supply and fixing of 1200mm (48") sweep ac ceiling fan complete with stepped electronic 300w regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")., supply and fixing of wall mounting 450mm sweep fan etc.,, supply and fixing of roof ventilator fan etc.,, replacement of underground utilities hdpe pipe damaged during earthwork excavations for pipe laying works including cost of additional earthwork excavation in all soils, including bt cutting, cc roads , removal of slushy soil and replacing the pipeline with sound pipe, including supply and delivery of hdpe pipes, couplers, jointing materials and required specials, cutting, threading, conveying , laying, jointing and

corporations/Associations/Others

CTN :43287647

05 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For ttps operation circle mpm i unit i complete dismantling of mill 1f and reassembling the dismantled spares in mill 1b - draining of mill gearbox oil completely, cleaning the gearbox internals like worm shafts and worms wheel. after inspection filling the gearbox with new/old oil including devolution of old oil to stores etc, (department vehicle will be provided for drawl of oil at free of cost)., charges for dismantling the gear coupling bolts, gear coupling (worm shaft only), distance piece, unscrewing the worm shaft extension cover bolts and bearing housing cover bolts, removing the worm shaft extension cover, lowering to ground floor, releasing the worm shaft assembly from its position and assemblies providing back the overhauled worm shaft assembly in the gear box and fitting back the worm shaft extension cover, bolting and tightening the bolts to the required torque level and assembling back the gear coupling bolts, distance piece etc., charges for dismantling the worn out rubber element in the mill motor coupling, cleaning inspection and replacement of new rubber element and checking the tightness of coupling including cost of consumables etc.,, charges for dismantling the spool pieces, multiple port outlet bodies and transition pipes 4 nos. each after assembling the coal pipe inspection with center feed pipe structures., charges for removal of orifice 1 no. after dismantling the victaulic coupling., charges for removal of mill journal doors including lead, lift and transporting of materials fromstores and devolution of scraps from site to stores and cost of consumables such as welding electrodes, gas, cotton waste etc.,, charges for removal of journal with trunnion assembly in the mills including lead, lift and transporting of materials from mill repair bay to mill floor and back, devolution of scrap to stores and cost of consumables such as welding rod, cutting gas, cotton waste etc., charges for changing of bowl extension ring (6 nos) per mill including lead, lift and transporting of materials from stores to mill floor and back, charges for dismantling of lube oil cooler, from lube oil system, cleaning, flushing the cooler, oil pipe lines, water pipe lines, oil separator tank, checking of water lines, valves and nipples., charges for providing wedges between lower skirt and mill insulation cover plate firmly, removal of gearbox bottom cover flange bolts, lowering the thrust bearing and pump housing after supporting lower radial bearing housing. lowering the thrust bearings and reassembling of all the above parts, charges for lifting the vertical shaft along with worm gear and worm wheel from top of the gear box and place it in stand. dismantling the worm wheel hub lock nut and removal of worm wheel from the worm hub by steam/induction heating. inspection of upper redial bearing and renewal if necessary., charges for dismantling and removing worn out thrust bearing of mill vertical shaft by gas heating the racer, cleaning the bearing seating area in the vertical shaft., charges for removing the thrust bearing adopter (worn out) and assembling the new adopter by heating, charges for removal of seperator body along with classifier assembly. inner cone mill outlet plate and venturi dismantling the air inlet housing after segregating from hot air duct placing in appropriate place. dismantling the bowl with bowl hub and separating the bowl hub from bowl and in filling the same., charges for dismantling of upper skirt assembly, lower skirt assembly, mechanical face seal assembly, dust guard and blue matching of seal runner, renewal of seal( bronze), air seal, dismantling of mill bottom cover, upper bearing housing cover, oil seals etc.,, charges for dismantling the triangular liners, cutting the bulged mill bottom plate, applying refractory cement at the mill bottom plate 1 set by providing bolts and welding., charges for dismantling the radial bearing after removing the oil pump hub and oil pump bushing., charges for changin

corporations/Associations/Others

CTN :43287648

05 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For ttps operation circle mpm i unit i complete dismantling of mill 2f and reassembling the dismantled spares in mill 1c - draining of mill gearbox oil completely, cleaning the gearbox internals like worm shafts and worms wheel. after inspection filling the gearbox with new/old oil including devolution of old oil to stores etc, (department vehicle will be provided for drawl of oil at free of cost)., charges for dismantling the gear coupling bolts, gear coupling (worm shaft only), distance piece, unscrewing the worm shaft extension cover bolts and bearing housing cover bolts, removing the worm shaft extension cover, lowering to ground floor, releasing the worm shaft assembly from its position and assemblies providing back the overhauled worm shaft assembly in the gear box and fitting back the worm shaft extension cover, bolting and tightening the bolts to the required torque level and assembling back the gear coupling bolts, distance piece etc., charges for dismantling the worn out rubber element in the mill motor coupling, cleaning inspection and replacement of new rubber element and checking the tightness of coupling including cost of consumables etc.,, charges for dismantling the spool pieces, multiple port outlet bodies and transition pipes 4 nos. each after assembling the coal pipe inspection with center feed pipe structures., charges for removal of orifice 1 no. after dismantling the victaulic coupling., charges for removal of mill journal doors including lead, lift and transporting of materials fromstores and devolution of scraps from site to stores and cost of consumables such as welding electrodes, gas, cotton waste etc.,, charges for removal of journal with trunnion assembly in the mills including lead, lift and transporting of materials from mill repair bay to mill floor and back, devolution of scrap to stores and cost of consumables such as welding rod, cutting gas, cotton waste etc., charges for changing of bowl extension ring (6 nos) per mill including lead, lift and transporting of materials from stores to mill floor and back, charges for dismantling of lube oil cooler, from lube oil system, cleaning, flushing the cooler, oil pipe lines, water pipe lines, oil separator tank, checking of water lines, valves and nipples., charges for providing wedges between lower skirt and mill insulation cover plate firmly, removal of gearbox bottom cover flange bolts, lowering the thrust bearing and pump housing after supporting lower radial bearing housing. lowering the thrust bearings and reassembling of all the above parts, charges for lifting the vertical shaft along with worm gear and worm wheel from top of the gear box and place it in stand. dismantling the worm wheel hub lock nut and removal of worm wheel from the worm hub by steam/induction heating. inspection of upper redial bearing and renewal if necessary., charges for dismantling and removing worn out thrust bearing of mill vertical shaft by gas heating the racer, cleaning the bearing seating area in the vertical shaft., charges for removing the thrust bearing adopter (worn out) and assembling the new adopter by heating, charges for removal of seperator body along with classifier assembly. inner cone mill outlet plate and venturi dismantling the air inlet housing after segregating from hot air duct placing in appropriate place. dismantling the bowl with bowl hub and separating the bowl hub from bowl and in filling the same., charges for dismantling of upper skirt assembly, lower skirt assembly, mechanical face seal assembly, dust guard and blue matching of seal runner, renewal of seal( bronze), air seal, dismantling of mill bottom cover, upper bearing housing cover, oil seals etc.,, charges for dismantling the triangular liners, cutting the bulged mill bottom plate, applying refractory cement at the mill bottom plate 1 set by providing bolts and welding., charges for dismantling the radial bearing after removing the oil pump hub and oil pump bushing., charges for changin

State Government

CTN :43303798

31 Dec, 2025 1.95 Lacs

Rangat - Andaman And Nicobar Islands

Tender For repair and maintenance of iei to r building at kadamtala under cd-i, rangat during 2025-26. sw - supply of electrical materials. - supply of electrical materials :, 20 watt, 4 feet, integrated led batten fitting. make : havells or its equivalent., 7 watt, b-22 type led bulb. make luker or its equivalent, 1200 mm sweep ac ceiling fan (white colour). make usha or its equivalent., fan capacitor 2.5 mfd., 4 way gang box. make : pressfit or its equivalent., 6 way gang box. make : pressfit or its equivalent., pvc straight/angle holder., 40 amps dp isolator, 1.5 sq.mm frls pvc insulated copper wire. make anchor or its equivalent., 2.5 sq.mm frls pvc insulated copper wire. make anchor or its equivalent., 4 sq.mm frls pvc insulated copper wire. make anchor or its equivalent., pvc pipe 20 mm. make : modi or its equivalent., 5/6 amps p t switch. make anchor or its equivalent., 5/6 amps p t socket. make anchor or its equivalent., 20 amps pt switch. make anchor or its equivalent., 20 amps pt socket. make anchor or its equivalent., 6 amps bell push (pt) switch. make anchor or its equivalent., 100 w, deluxe fan regulator (rotary step).make anchor or its equivalent., 6-32 amps, single pole mcb

CTN :43310902

03 Jan, 2026 1.33 Lacs

Bardhaman - West Bengal

Tender For electrical goods supply and fitting at guest house under bankola area - discription of items, 32 amp mcb, 16 amp socket, 16 amp top, holder, 4 cutting nano board, 5 amp switch, 5 in 1, 5 in 1 box, fan repair, 2.5mm wire, 0.75mm wire, complete set ac board, 13 gayser repairing 10 ltr (coil, relay change etc), 10 watt led bulb, 1" cashing pipe, 6mm wire, 15 watt surface light, exhaust fan supply & fitting 12", new instant gayser supply & fittings 6ltr, starter switch, nail screw tape guji detofix etc, fitting charges for all material & above job, total impact of gst for the purpose of ctc

Central Government/Public Sector

CTN :43306580

13 Jan, 2026 11.33 Lacs

Gayzing - Sikkim

Tender For tender for supply of purchase of stainless steel seamless pipe elbow union etc for r and m of powerhouse - ss flange 50nb , ss seamless pipe 50nb , ss elbow 50nb , seamless ms pipe 40nb , seamless ms pipe 20nb , seamless pipe elbow 40nb , seamless pipe elbow 20nb , ss union 19mm

CTN :43234682

29 Dec, 2025 NA

Delhi - Delhi

Tender For vehicle repair - repair to brake system repair to brake system with replacement of the following , wheel cylinder , booster assy , replacement of brake flexible pipe , replacement of brake shoes , repair to clutch system taking down the gear box assembly from the engine to repairing clutch system opening cleaning and cheecking the worn out parts replacing clutch plate assy 1 no arm clutch release spring releasing paddle clutch clutch repairer kit , oil dot 4 it paddle assy 1 no reassembling fitting and setting the system , repair to steering with replacement of the following m and l repair to steering sytem by opening the steering box and repair replacment of idler arm link ball joint greasing steering spindle sleeve steeing arm link etc , misx repairs m and l for replacement to oil filter fuel filter of the vehicle , m and l for welding work for the worn out part of the vehicle , m and l for replacement of the side mirrors 02 nos , m and l for repair replacement of head lamp 02 nos , m and l for engine oil premium plus for eicher 10 75 , m and l for tata genuine coolant , computerized alignment of wheels , greasing to all the bearing and moving parts of the vehicle after completion of repairing , servicing washing and cleaning to be carried out after completion of all above mentioned work and testing to seen the vehicle satisfactorily condition. , dismantling exhaust system from the vehicle and refit the same after cleaning the carbon from interior portion of pipe muffler with cleaning agent , labour charges

Central Government And Public Sector

CTN :43164743

02 Jan, 2026 NA

Angul - Odisha

Tender For supply of , corrugated flexible metal hose, corrugated flexible metal hose, 1 inch nipple ss 304 external thread, 3 by 4 inch ss nipple, 1 by 2 inch ss nipple, s s male and female union , ss union joints , ms union joint, ms union joints

CTN :43064733

26 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of h.p.hose , servo motor control valve , solenoid valve 82 , processor control , main control switch , illumination push button whie , circuit breaker 13-18 amp , fuse 6a , control transformer , compressed air regulator , permeate transfer pump , tee pvc push in fitting pu 9 , servo motor control valve 1 , control panel for 30 tpt ro plant , sensor cable with electrode , mechanical seal for filter pump , impeller grub screw , casing , pump shaft complete 20 tpd , split pin , 3 way ball valve , hp pump valve kit , oil gauge , oil seal plunger rod , wick , adaptor , spacer v-packing spacer , adpter female , oil filter cap , tee pu4 , 1-4 mxpu4 elbow , pre filter pump with motor ro-2tpd , cartridge filter , cartridge filter housing 20 , frp filter od 137 , membrane cleaner 55 , membrane cleaner 11 , membrane cleaner 66 , membrane cleaner 77 , pl-4 hose mtrs , tie rod nut flat , high pressure hose to pt 60 , sock mount for main frame , dt module tool kit , 3-8 h.p. connector with ferrule and nut , pressure control switch , connection high pressure , elbow pu push in qsl -3-8 mxpu10 , lp hose 32mm id x 1 1-4 bspm x 500l , hose for pk 20 pump in-out , elbow 3-8 nptmx12 nptm , contact block , flexible hose h.p.brine outlet , victualic coupling , flow meter , flexible hose h.p.feed inlet , o ring h.p.connection , solenoid valve , cartridge filter complete , conductivity display meter with sensor , chi 2-40 shaft seal , o-ring for head distributor , cartridge filter housing head , o ring cartridge filter housing , lip seal dt module-groove ring gasket flange-sealing , pu4 hose , flexible pipe-pu8-9 , module bypass nozzle , 3-8 elbow connector , 3-8 sraight connector , solenoid valve 1-2 f 3-2-way ve82 , non return valve 3-8 f , servo motor control valve 230v 3-8 , servo motor control valve , solenoid valve actuator , solenoid valve brass 1-2 f 3 way , solenoid valve ve83 , deacidification filter , pressure switch , relay card , fuse - 6 amps , pressure transmitter , relef valve hp pump , pressure switch , temperature indicator , level switch , pulsation damper 0.16 lts , powerpack for edi xl200 , pulsation damper 0.75 lts , diaphragm for pulsation damper 2 lts , e-spare kit ro 30 tpd , electric spare kit for ro 200 , running time meter , main control switch 5kw , illunination push button red , circuit breaker 1.6-2.4 amps , mini circuit breaker , fuse 2a , fuse 6amps , fuse 6a , fuse socket-cap , contactor 4 kw , contactor 7.5 kw , contactor 12.5 kw , mini relay 220 volt , circuit breaker 1.0-2.6 amp , single phase preventor , motor 11 kw , flow meter with magnetic float 150 - 1600 lph , pressure gauge 0-100 , pressure guage0-100 bar , pressure gauge 0-10 , air pressure guage , conductivity meter-panel mounted , sensor cable with electrode , prefilter - filter pump shaft seal , nut , sleeve gasket , chamber with bearing ring , bearing ring rotating , impeller , spacing pipe , spacing pipe , spacing pipe , coupling complete for pump 202600 , repair kit for pre filter pp , spare kit d32 pvc , pvc service kit , abs service kit , pvc service kit 02s-04s ro 200 , ball valve 2 way pvc-u 20 mm , 2 way ball valve set of 2 , ball valve abs 3 way d20 , gf pvc-u ball valve 3 way pvc-u 32 mm spigot type , 3 way ball valve , globe valve/sampling cock pvc 1-4 bsp f , non return valve pvc 3-8 bsp f , non return valve , ball check valve d 25 , 3-8 tee connector ss , 3-8 h.p connector with ferrule and nut , quick acting coupling , victaulic coupling , victauling coupling 1-4 , ss service kit , ss service kit for ro 510 5s/10s , ss service kit , pulley spa 250 x 3 groove , pulley spa 118 x 3 groove , pulley 5 groove spa 280 , pulley 5 groove spa 125 , taper bush for hp pump motor , taper bush 2517 bore 35 mm , taper bush 2517 bore 35 mm , taper bush pump , taper bush 1610 bore 42 mm , bearing hp pump , crt prefilter-filter pump motor bearing nde , seal kit for hp pump , valve kit for hp pump , oil filter cap , oil seal , oil seal plun

Central Government/Public Sector

CTN :43085390

27 Dec, 2025 50.00 Lacs

Saharanpur - Uttar Pradesh

Tender For repair/maint of di gi pipe line, bore well and other connected items, repair/ replacement of internal electric wiring, light fitting and fixtures in md and otm accn and repair/maint of hangers, weather shelter lights and other connected items at af s

Ss Union Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector