Latest stale wire Tenders | Government stale wire Tenders

corporations/Associations/Others

CTN :42721086

10 Dec, 2025 1.50 Crore

Kumbakonam - Tamil Nadu

Tender For revamping civil infrastructure - construction of maintenance shed, office room and store in one roof, canteen and providing cement concrete flooring for parking area and in tnstc depot at chidambaram - earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification., supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the corporation officials., supplying and filling gravel in layers of not exceeding 15cm thick including watering well ramming and consolidation etc., complete as directed by the corporation officials., providing and laying, spreading and compacting graded stone aggregates to wet mix macadam 250mm thick specification including premixing the materials with water at omc in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in sub base/base course on well prepared surface and compacting with vibratoy roller to acheive the desired density including cost of material, labour charges,rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of morth rev-5 and as directed by the corporation officials., cement concrete 1:5:10 (one cement, five sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification, plain cement concrete 1:2:4 (one part of cement, two parts of sand and four parts of aggregates) using 20mm hbg jelly for flooring including finishing and supplying and fixing tar pad 12mm thick complete as directed by the corporation officials., supplying, fabricating and placing in position mild steel / ribbed tor steel grills for all rcc works as per design given including cost of steel and g.i. binding wire in all floors etc. complete complying with standard specification. (contractor has to make his own arrangements for the supply of steel and binding wire), reinforced cement concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all rcc items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the rcc floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with cement mortar 1:3 (one cement and three sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers, supplying and erecting steel centering including necessary supports for plane surfaces for reinforced cement concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 bg stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (payment for centering shall be given after the concrete is laid), foundation & basement, super structure, brick work using country bricks of size 9" x 4-3

Central Government/Public Sector

CTN :42753748

05 Dec, 2025 NA

East Singhbhum - Jharkhand

Tender For supply of gi welded mesh-mw, wire size: 5. 6mm dia, as per drg no: ucil/nwp/ms-189 dt 18-04-2019

CTN :42592801

25 Nov, 2025 NA

Korba - Chhattisgarh

Tender For tender for supply of drilling accessories : : nq barrel head with guide coupling with 8 no to, welded, nq overshot latches with spring, t-4 bearing, rubber bucket 76mm, piston rod packing, valve insert rubber, liner packing rubber, flange cover packing/fluid end cover packing '8', type, liner hard chromium, valve cover packing rubber, hydraulic leather bucket 4" size, hydraulic 'v' packing set big, hydraulic 'v' packing set small, hydraulic feed cylinder bucket, clutch segment 36 teeth, clutch segment 47 teeth, clutch segment 51 teeth, hydraulic pressure gauge underline 4 ^ prime prime *2000 psi, hydraulic strainer underline 1.5 ^ prime prime *8^ prime prime, hydraulic return filter, ball valve hd 1.5" (m.s.), 6 mm auto wire(copper, 25 mtr), h3 bulb(24 v), h4 bulb(24 v), mast led light 30 watt (dc), nw cassing cutter with nw connection, hydraulic cyl seal kit (vicker)

Central Government/Public Sector

CTN :42606587

15 Nov, 2025 NA

Dhanbad - Jharkhand

Tender For supply of ms wire netting welded type , ms wire netting welded type , ms wire netting welded type , ms wire netting welded type , ms wire netting welded type , ms wire netting welded type , ms wire netting welded type , ms wire netting welded type , ms wire netting welded type , ms wire netting welded type

Central Government And Public Sector

CTN :42360027

15 Nov, 2025 NA

Chittorgarh - Rajasthan

Tender For corrigendum : tender for supply of led indicators for ryb phase 220 v , 22 , mcb / isolators at mains 3 phase 440 v ac 10a , transformer 415/220 ac 45 va , led indicators 220 v , rtd 3 wire pt100 for evaporator pt100 rtd (platinum resistance temperature detector) temperature range -20 degc to +850 degc (+328 deg f to +1562 deg f) , rtd 3 wire pt100 for h2 in or out pt100 rtd (platinum resistance temperature detector) temperature range -20 degc to +850 degc(+328 deg f to +1562 deg f) , cyclic timer (220v ac , setting at 2 hr. on-0.5 hr off) , auto/manual selector dpdt , 6a , 220v ac) allows switching between automatic and manual control modes. , toggle switch auto manual selector & on/off , remote /control card with ac to dc convertor (220v ac to 24v dc) , digital temprature indicator (3.5 digit to 0-99.9 deg rtd class b pt 100 3 wire rtd as sensor) , digital temprature controller with delay timer (3.5 digit 0-10 deg adjustable , dual set point with 10 deg hysterisis and 2 set points , time delay adjustable 0-100 sec sensor 3 wire rtd) , voltmeter (300v , 72x72) , amp. meter (ammeter 0-10a , 72x72) , contactor for compressor (coil 220v 50 hz) , contactor for motor (coil220 v 50 hz) , over load relay for compressor 3 phase , 440v ac) , over load relay for motor (3 phase , 440 v ac) , compressor (3 phase , 440 v 4360 kcal/hr) , fan motor 3 phase , 440v flame proof 0.5 hp is2148 , fan blade (15 inch) typically features aerodynamically designed blades for efficient air moement and reduced noise. , condensor (4 row 16x18 , 3/8 copper with copper with al fins ) , freon receiver (1.5 ton , steel fabricated with copper connection) , freon drier filter (3/8 dcld63) , accumulator (1.5 ton , steel fabricated with copper connection) , hand shut off valve1/2 inch (brass body with ss pin) , hand shut of valve 1/4 inch (brass body with ss pin) , hand shut off valve 3/8 brass body with ss pin) , pressure guage 500 psi (350 psi operation value 20 psi to 35psi) , pressure guage 500 psi (500 psi operation value 200 psi to 70 psi) , water collection chamer ss 316 (fabricated complete in stainless steel , including 2 nos of ss drain valve & complete ss drain line nb20 from evaporator recommended by the oem 0 chance of break and escape of hydrogen. , capillary (0.64 copper tube with stainer) , drain valve (dn15 , cs body ss ball , teflon seat) , hp/lp pressure switch (kf -15/mp-15 , low set point at 5 psi and high set point at 350 psi) , complete precooler in (ss316) with inbuilt copper bundle , end plates and flanges , complete evaporator in (ss316) with spiral form cooling coil ( only with 4 joints instead of 104) , h2 interconnections ss316 welded with 4 flanges , spiral form cooling coil only for evaporator (only with 4 joints instead of 104) , refrigerant gas (r-407) (8 kg) in cylinder , gaskets (1 set) (neoprene) made from high-quality rubber of silicone) , flare nuts (1 set) refrigeration brass flare nuts , designed to fit standard refrigeration tubing sizes and flare fittings. , thermostatic expansion valve 3by8 function regulates the flow of refrigerant into the evaporator coil based on temperature and pressure conditions. , theromowell in ss316 250 mm , solenoid valve 3by8 flare fitting

CTN :42551461

15 Nov, 2025 28.83 Lacs

Sundergarh - Odisha

Tender For supplying fitting and fixing of angel guard post with welded wire mesh jally at reservoir site dam top of talsara irrigation project

Stale Wire Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector