Latest stanchion Tenders | Government stanchion Tenders

Central Government/Public Sector

CTN :43527138

31 Jan, 2026 24.96 Lacs

Bikaner - Rajasthan

Tender For painting to steel gates, rolling shutters, steel window, fencing post, steel railing of guard post in tech and domestic area at af stn nal

CTN :43502583

19 Jan, 2026 NA

Wardha - Maharashtra

Tender For supply of steel bar carbon hot rolled squre 16mm , steel bar carbon hot rolled flat 50 x 6 , leaded brass rod round 16mm , angle ms long 6ft , post fence metal angle

CTN :43502316

19 Jan, 2026 NA

Imphal - Manipur

Tender For supply of structural steel work ms tubular post truss purlins , modular pvc wall panelling , aluminium u channel , aluminium 2 tier sliding channel , aluminium t channel , aluminium tower , binding wire , tapping screw , star screw , nails , mdf pre laminated particle board , synthetic enamel paint , thinner , paint brush , red oxide , nut and bolt 8mm , welding rod , iron cutter , drill bit , iron grinding , welding machine , black cushion chair , mat brown , jute mat , ply wood

CTN :43206566

12 Jan, 2026 NA

Ferozepur - Punjab

Tender For corrigendum : material and labour for construction of 3800 mtr x chain link fence in ferozepur - s&f structural steel post of angle iron 65x65x6mm, 4.50 mtr long, weight as per is 2062-1984 including fabrication of 0.60 mtr both side long top portion swan neck v type at 30 degree to vertical, including making six round holes of 15 mm dia on vertical posts and for fixing of nuts and bolts and three nos of 15 mm dia holes for fixing strut and five nos notches on the swan neck and welding of two nos of 16 mm ms rod each of 0.23 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint embedded portion of angle 0.45mtr. make : jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge, s&f structural steel post of angle iron 65x65x6mm, 3.30 mtr long, weight as per is 2065- 1984+b12, including fabrication for strut post bending at top portion, including making three nos holes of 15 mm dia on vertical posts for fixing of nuts and bolts and three nos of 15 mm dia including 0.23 mtr 16 mm dia ms rod two piece to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint for stud 0.45mtr below gl for one side of the post complete all as specified and directed by engineer-in-charge. make : jindal/ sail/ tata/equivalent isi marked, s&f galvanised two or three strand steel barbed wire (line wire) of 2.24mm diameter of wire, barbs at 75mm spacing. the barbs are (point wire) 02mm thick wire shall be isi marked as per is:278 of 1978 (third revision) with amdt no 1 to 4. the points of barbs shall be sharp. the line and point wires shall be circular in section free from scales and point wires shall be circular in section free from scales and defects and shall be uniformity galvalium. the barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of is specification cited above read with is 4826/79 (first revision).make:sail/tata/ aplapollo/rinl/jsw complete all as specified and directed by engineer-in-charge, s&f galvanised steel chain link fence fabric of mesh size 125mm x 125mm (+/-) 4mm of 4.00mm nominal diameter. the size of chain link fence fabric shall be 2.7 mtr x 15 mtr mesh wire. galvalium chain link shall be manufactured as per is 4823 complete all as specified and directed by engineer-in-charge. make : tata/jsw/rinl/ jindal/sail., s&f ms plat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia, including one coat of red oxide primer and two coats of synthetic enamel paint. 3.02 kg per flat. make of steel: jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge., s&f mild steel bolts with hexagonal head at one end and screwed the other end fitted with one nut and two washers. the bolts shall be 12mm dia and 50mm long. strong long lasting, resistant to corrosion and 100% recyclable complete all as specified and directed by engineer-in-charge. make: jindal / sail/ tata/ apl apollo/ jsw/ rinl, s&f ms round bars 10mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer. make: jindal/ sail/ tata/ apl appolo/ jsw/ rinl complete all as specified and directed by engineer-in-charge., s&f ms round bars 16mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer make: jindal/sail/tata/apl apollo/jsw/rinl complete all as specified and directed by engineer-in-charge., material and labour for excavating in soft and dense soil trenches, exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in dept

CTN :43521836

20 Jan, 2026 NA

Multi City - Multi State

Tender For supply of main girder , cross girder , ramp girder , a frame , b frame , anchor winch , aluminum welding for main girder qty 50 nos and ramp girder qty 150 nos , s frame , h frame , panel bb , transom bb , stringer button , ramp button , ramp plain , post end male bb , post end female , bearing bailey bridge , base plate , steel chasses large , steel chasses small , racker , sway braces bb , bolt bracing , riband bb , plain roller , riband bolt , packing timber 9 inch x 3 inch x 6 feet , packing timber 9 inch x 6 inch x 3 feet , rocking roller , panel pin , transom clamp , carrying hook , box spanner , screw clamp , hinged clamp

CTN :43494625

15 Jan, 2026 6.36 Lacs

Multi City - Karnataka

Tender For supply of material and machinaries the construction of a kitchen at the kannada higher primary school in bannur village of athani taluka - pvc pipe of 4kgcum75 mm morb35, ceramictiles 30x 30 cms morb25, providing and installing of pre painted galvalume iron trapezoidal profiled sheet, providing and fixing in position brass bib cock of approved quality 20mm nominal bore, providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm, fabricating, supplying and erecting m.s. tubulartruss, providing and fixing in position black cuddapah slab / shahabad slab / thandur blue slab 4 cms thick, providing and fixing glazed vitrified tiles of approved make, quality and colour of size 600x600x10mm thick, providing and fixing in position in cement concrete steel glazed windows and ventilators side hung/top hung fully openable as per approved drawings, providing and applying two coats dry distemper of approved brand, and shade on wall surface including priming coat and whitening after throughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications, providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square / rectangular / polygon in plan including cost of all materials, labour complete as per specificaiton, atn9 hom of vibrator 0.71 days, atn8 plasticizer / super plasticizer, atn7 mixer (concrete) - 1 cum capacity, atn6 portland cement, atn5 broken stone aggregate 12 mm to 10 mm size, atn4 broken stone aggregate 20 mm size, atn3 broken stone aggregate 40 mm size, atn22 burnt bricks class 35 (non modular), atn2 coarse sand (zone iii), atn15 mixer (concrete small used in culvert), atn14 bond stone 20 x 20 x 45 cm, atn13 rubble stones, atn11 binding wire, atn10 tmt bars fe 500, atn36 providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on10mm thick cement plaster, atn30 providing and fixing in position fully panelled matti / nandi wood shutters for doors, stylesand rails of 30mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as perdrawing and panels of 20mm thick including cost of materials, labour, hom of machineries complete asper specifications. ( excluding cost of fixtures ), atn26 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for chejja, atn46 providing and placing on terrace, polyethylene water storage tanks with manhole lidand suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flowpipes, including cost of all materials, labour, transport charges, hom of equipments and testingcomplete as per specifications.(for 1000 litre capacity) as per is 12701 1996. specification no.kbs13.22, atn39 providing and finishing external walls in two coats with waterproof cement paint ofapproved brand and shade to give an even shade after throughly brooming the surface to remove all dirtand loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications., atn29 providing matti / nandi wood frames of doors, windows, clerestory windows, ventilatorsand other frames, wrought, framed or assembled including making plaster groves ( excluding cost ofcement concrete and side clamps ), but including cost of materials, labour, hom of machineriescomplete as per specifications., atn28 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for roof slab, atn25 providing and removing centering, shuttering, strutting, propping etc., for beams

CTN :43475418

15 Jan, 2026 4.50 Lacs

Bundi - Rajasthan

Tender For supply and fixing work of open gym item in ward no 2 lakheri - part " a " :- building work ;, air swing: providing, designing and fixing of air swing in pair of size 1150 x 900 x 1250mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic of 3mm, colorful and uv resistant and environmental friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in charge. equipment to be fitted with inbuilt limiters to prevent unwanted movements. all open ends of pipe to be closed by gi/ lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc (the cement concrete and excavation work shall be paid separately)., horse rider station: providing, designing and fixing of horse rider station of size 1000 x 600 x 1100 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury. base plate cover and seat to be made up from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and uv resistant and environmental friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in charge. equipment to be fitted with inbuilt limiters to prevent unwanted movement. all open ends of pipe to be closed by gi/ lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolt and once the concrete is set, fix the equipment on to it and cover with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate cover and fixing of equipments etc (the cement concrete and excavation work shall be paid separately)., stair stepper: providing, designing and fixing of stair stepper in a combination of pair and a single step of size 1000 x 800 x 1400 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made up from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and uv re

CTN :43486859

28 Jan, 2026 NA

Belgaum - Karnataka

Tender For supply of elevated security post with search light -structural steel fabrication , platform within bracket anti slip flooring , concrete foundation , ladder with safety rails , side handrails and guard rails , roof within bracket optional metal sheet , painting and finishing , search light

State Government

CTN :43487355

22 Jan, 2026 NA

Daman - Gujarat

Tender For supply of box file , calculator , white ink pen , stapler big no , carbon paper fs , carbon paper a3 , 6 x 4 brown cover 70 gsm , 6 x 4 green cover 70 gsm , 9 x 4 brown cover 70 gsm , 9 x 4 green cover 70 gsm , 11 x 4 brown cover 70 gsm , 11 x 4 green cover 70 gsm , 14 x 18 green plastic-coated cover , 11 x 14 green plastic-coated cover , blue ball pen , red ball pen , black ball pen , permanent marker black 2mm , permanent marker blue 2 mm , permanent marker red 2 mm , permanent marker black 1 mm , permanent marker blue 1 mm , permanent marker red 1 mm , pencil box hb , eraser , scale ruler steel 12 inch , white tag , highlighter sets , post it stick note 3 cut 3x3 inch , stick on notes single 3x3 inch , u pin with plastic coated , blue ink stamp pad 11x7cm , blue ink stamp pad 15. 7x9. 6cm , tap dispenser heavy duty 1 inch , cello tap transplant 1 inch , cello tap transplant 2 inch , paper knife cutter wide blade , paper knife cutter thin blade , scissors standard big size , scissors standard small size , jumbo punching machine 250 pages

CTN :43465382

16 Jan, 2026 91.8 Thousand

Firozpur - Punjab

Tender For tender for supply of 25 watt led post top lantern , tape insulation pvc 20 mm x 25 mtr long , tape insulation pvc 25 mm x 25 mtr long , tape insulation pvc 15 mm x 25 mtr long , led tube rod 2 feet 18 oblique 20 watts , tape insulation pvc 40 mm x 25 mtr long , tape insulation ht pvc 60 mm x 25 mtr long , screw wood steel 40 mmx10 swg , turpentine oil thinner 1 lts , nut bolt 75mmx6mm with round head , screw wood steel 25 mm pkt of 200 nos , screw wood steel 35 mmx08 swg , screw wood steel 20 mm pkt of 200 nos , screw wood steel 30 mm pkt of 200 , aluminium knob for cup board 25 mm dia , machine screw size 25 mm each of 100 qty per pkt , screw wood steel 15 mm pkt of 200 nos , screw wood steel 60mm x 10 swg , machine screw wood steel 30 mm each of 100 qty per pkt , steel screw 25 mm full thread half round head , steel screw 15 mm full thread half round head , screw wood steel 50 mmx10 swg , batten teck wood 3 oblique 4 inch x 3 oblique 4 inch , batten teck wood 1oblique 2 inchx 3 oblique 4 inch , batten teck wood 1oblique 2 inch x 1oblique 2 inch , paint brush size 75mm , paint brush size 100mm , drywall screw oblique drilling screw 4 head 500 nos 35mm , drywall screw oblique drilling screw 4 head 500 nos 38mm , drywall screw oblique drilling screw 4 head 500 nos 45mm , drywall screw oblique drilling screw 4 head 500 nos 50mm , wood nail no 17 35mm pkt of 1 kg , wood nail no 17 45mm pkt of 1 kg , wood nail no 17 75mm pkt of 1 kg

Stanchion Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government