Latest static inverter Tenders | Government static inverter Tenders

Central Government And Public Sector

CTN :37768769

24 Mar, 2025 85.43 Lacs

Dharchula - Uttarakhand

Tender For bid to ras tender for supply of radar type water level sensor (awlr) - (0 - 30) meter range with all accessories complete and as per tech specs. , radar type velocity sensor with all accessories and as per tech specs. (annex-ii) , data logger for awlr/ velocity sensor with all accessories including frp enclosure and lightning arrestor and as per tech spec. (annex-ii) , gsm/gprs/3g/4g/5g single sim modem to transmit data over internet from data logger to api server and as per tech specs. (annex-ii) , power supply - i) smf battery bank , battery stand , frp enclosure and other required accessories having minimum backup up to 15 sunless days for both sensors/data logger and vsat , solar panel , solar charge controller/charger for charging above battery bank and ups/ inverter for regular feed of ac power for the above system. , providing earthing of local station consisting of 1 no. lighting arrester and 02 nos. electronic earthing. , v-sat trans-receiver and all other accessories supporting minimum band width of 256 kbps bandwidth with interfacing facility with the data logger as per specs (annex-ii) and subscription for bandwidth. , supply of siren with accessories complete in all respect viz. power supply provision , mounting , provision of integration with awlr etc , web portal dashboard for viewing current/ historical data of the sensors , installation , commissioning , testing of entire system and trial run of the system including api & vsat data connectivity. , amc charges for the installed system after warranty period

CTN :39369266

24 Mar, 2025 NA

Lucknow - Uttar Pradesh

Tender For bid to ras purchase and installation of various tools and equipment in govt itis across state of uttar pradesh - hydraulic trainer kit, each consisting of the various matching components and accessories as per specification documents , ss and sc centre lathe all geared with specification as per specification documents , pneumatic trainer kit, each consisting of the various matching components and accessories as per specification documents , simulator, desktop computers consisting of the various matching components and accessories as per specification documents , tool and cutter grinder , four stroke petrol engine with cng setup-working condition , petrol mpfi engine assembly with fault simulation board , mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling , automotive exhaust 5 gas analyser and diesel smokemeter for petrol and diesel , multi scan tool to scan engine, abs and ebd, at, srs, body control and immobilizer , cut section of 4by6 cylinder diesel engine in moving condition to show movement of internal parts , diesel engine running condition stationary type single cylinder , walk in cooler puf insulated for cold room 6x4.5x8 cft. , vrf and vrv unit with two indoor units 2.5tr each and 5tr capacity out door unit complete with air cooled condenser, accessories and controls. , recovery unit with cylinders , ice candy plant , duct able split a.c 1.5 ton , split air conditioner inverter technology , split a.c , lathe s.s. and s.c. all geared head stock with minimum specification with d.r.o. z and y axis , surface plate - granite , welding simulators for smaw,gtaw and gmaw , water cooled induction welding and brazing machine , gmaw welding machine , power saw machine , ac and dc gtaw welding machine , spot welding machine , air plasma cutting equipment

Corporations/Associations/Others

CTN :39700017

28 Mar, 2025 NA

Nashik - Maharashtra

Tender For supply of electric goods and service - wiring accessories, pvc hms conduit of size 20 mm ., pvc trunking (pvc casing-n-capping) of size 20 mm, pvc box trunking of size 50x16/20 mm., pvc box trunking of size 50x50 mm., 1.5 sq.mm frlsh copper pvcinsulated wire (90 mtr), 2.5 sq.mm frlsh copper pvcinsulated wire (90 mtr), g.i. bearer wire 14 swg, pvc / plastic bobbin (for service wire), wp 2 x 2.5 sq. mm. aluminium service wire (90 mtr), wp 2 x 4 sq. mm. aluminium service wire (90 mtr), wp 2 x 6 sq. mm. aluminium service wire (90 mtr), wp 2 x 10 sq. mm. aluminium service wire (90 mtr), 3 pin plug socket 6a, 3 pin plug socket 16a, ceiling rose / batten holder / slanting holder /hanging cord switch / hanging bell push / pendant holder, adaptor for lamp holder, 3 pin plug socket 6a with piano switch 6aerected on pvc surface box complete with all accessories, 3 pin plug socket 6a with piano switch 6 acombined unit erected on pvc surface box complete with all accessories, supplying 3 pin plug top 6 a bakelite type, supplying 3 pin plug top 16 a bakelite type, pvc junction box 20 / 25 mm, pvc pipe bend 20/25 mm, pvc pipe coupling 20/25 mm, modular switches and accessories, modular type switch 6a, modular type switch 16a, modular type 3 pin 6a multi socket with safetyshutter, modular type 3 pin 16a multi socket with safety shutter, modular type (two module) electronic step regulator for fan, pvc surface modular switch box with doublemounting plate for 3 module, pvc surface modular switch box with doublemounting plate for 4 module, pvc surface modular switch box with double mounting plate for 6 module, pvc surface modular switch box with double mounting plate for 8 module, pvc surface modular switch box with double mounting plate for 12 module, pvc surface modular switch box with double mounting plate for 16 module, pvc surface modular switch box with double mounting plate for 18 module, modular spmcb 6 a (1 module), supplying power strip with one switch 6a and 4 sockets each 6a,230 v combination with surge and spike protection unit complete.(extension board6), led fittings (indoor), led lamp 5 w b22/e27 base, led lamp 15 w b22/e27 base, led lamp 30 w b22/e27 base, led lamp 40 w b22/e27 base, led square / circular max. 18 w downlighter/panel light, led panel light (600mm x 600mm) 40 w, bulk head led fitting 10 w, led tubelight 20 w 4 feet, inverter led batten 20w tube light fitting withpolycarbonate housing, ding dong / electronic musical type call bell with heavy duty coil, electronic type cordless call bell, led fittings (outdoor) and accessory, led street light fitting 18 w, led street light fitting 24 w, led street light fitting 36 w, led street light fitting 60 w, led street light fitting 75 w, led flood light fitting 50w ip65 & ik07 class, led flood light fitting 70w ip65 & ik07 class, led flood light fitting 100w ip65 & ik07 class, led flood light fitting 120w ip65 & ik07 class, led flood light fitting 150w ip65 & ik07 class, led flood light fitting 200w ip65 & ik07 class, led highbay fitting 135w ip65 & ik08 class, street light bracket made from 20 mm. dia g.i.pipe 0.6 m. in total length, street light bracket made from 25 mm. dia g.i.pipe 0.6 m. in total length, street light bracket made from 20 mm. dia g.i.pipe 1 m. in total length, street light bracket made from 25 mm. dia g.i.pipe 1 m. in total length, driver for outdoor led fittings 18-26 w, driver for outdoor led fittings 26-36 w, driver for outdoor led fittings 200 w, fans, ceiling fan of 600 mm. sweep, ceiling fan of 1200 mm. sweep, air circulator 600 mm. sweep oscillating type, wall mounting 1440 rpm, pedestal fan 400 mm., exhaust fan of light duty 225 mm, energy saving bldc ceiling fan 1200 mm sweep max 28 w consumption, condenser 2.5 micro farad for ceiling fan, anchor type fastener fan hook with 2 nos. of 10 mm dia x 75 mm long, switchgear, mcb 1 pole , 6 a, mcb 1 pole , 32 a, mcb 1 pole , 63 a, mcb 2 pole 32 a, mcb 2 pole 63 a, mcb 3 pole 32

CTN :39798038

01 Apr, 2025 5.88 Lacs

Thumba - Kerala

Tender For replacement of solar string inverter and associated electrical works for solar power plant phase i at iisu, vattiyoorkavu.

State Government

CTN :39724394

31 Mar, 2025 NA

Chennai - Tamil Nadu

Tender For supply, installation, testing and commissoning of 60kw on grid solar power inverter

State Government

CTN :39711294

24 Mar, 2025 NA

Manuguru - Telangana

Tender For supply of t and p materials for cam division/stage-i and ii/btps.-supply of t and p materials for cam division/stage-i and ii/btps.- heavy duty general purpose hydraulic jack,capacity:5ton,, stroke:150mm,model:xl00, hydraulic jack:, capacity:20ton,stroke length :12mm,jack closed height:lessthan 55mm., hydraulic pump specifications.no of plungers:1,maximum pressure, pump, can develop:700kg/cm2,discharge/stroke.cc:2.8,weight: <=9kg., pump with teliscopic collapsible handle, hydraulic jack,with pmp threaded,100t,150mm, make: ener pac, portable arc welding machine model tornado -201 power saource with with, 3 meters supply cable + 3 meters welding cable with holder + 3 meters, return cable with earth clamp, make : esab/l&t/ador fontec, digital vibration meter model:ird 811d, gauge,dial;range:0.01 to 20 mm, make: mitutoyo, dial guage stand magnetic on/off switch, make:mitutoyo, vernier caliper (0-150mm) code no.530-335, vernier caliper (0-300mm) code no.530-322, make:mitutoyo, outside micrometer (150-300mm) code no.104-136a, make:mitutoyo, outside micrometer (300-400mm) code no.104-142a, tubular inside micrometer code no.137-208, block,chain pulley;type:triple spur gear manual;capacity:5 t;length:20, m;make:indef;additional information:lift p-series, block,chain pulley;capacity:2 t;maxi lift:20 m, block,chain pulley;type:heavy duty triple spur gear,light weight, body;capacity:1 t;maxi lift:15 m, make: indef/demag/kito/venus, d-shackle 5ton, make: usha martin, shackle;type:d;load rating:1 t, d-shackle 2 ton, make: usha martin, shackle;type:d;load rating:3 t, make: usha martin, d shackles 10 ton lifting capacity, make: usha martin, steel wire rope slings 10 ton capacity x 6mtr long, make: usha martin, belt sling,75 mm width 4 mtrs. length of polyster duplex flat webbing, with plain loops at both ends safety factor 7:1., make: usha martin, circlip;type:plyer;size:195 mm;additional information:ptno 1441-7internal nose, hand operated high pressure grease gun with all accessories(hose,nipples & trolley arrangement)-5kg capacity, allen keys set,1/16'' to 3/8'', feeler gauge, thickness: 0.03 to 0.5mm, no of leaves: 13 (long leaves),series: 184, make:mitutoyo, universal sets adjustable spanner 1171 cp insulation plier 162-8j,s.d.932&859, spanner set,double open end;size:32x36 mm;material:chrome vanadium/carbon steel, taparia make heavy duty pipe wrench ,length-450 mm,least max opening 73mm,product no-hpw 18, make:tapparia/mekastar/stanley/torquestar, taparia make heavy duty pipe wrench ,length-250 mm,least max opening, 48mm,product no-hpw 10, make:tapparia/mekastar/stanley/torquestar, d spanners set, 12nos, 6-32 mm, make: jhalani, bench vice,150 mm, ring spanner 6-32mm, hand pump, for oil barrel, hand greaqse gun, capacity:1kg, spanner,mekaster double ended deep offset ring spanner,chrome vanadium, steel chrome plated,wave profile having a/f size (mm):32x36 confirming, to din 838,iso 3318,10103,10104&691.,part no.mdrm-3236, spanner,mekaster double open ended spanner chrome vanadium, steel,chrome plated,position of open ends 15 degree having a/f size, (mm): 36x41 confirming to din 3110,899,iso 1711,10102,691&3318,part, no.mdom-3641, mekaster double ended deep offset ring spanner, chrome vanadium steel, chrome plated, wave profile having a/f size (mm):41x46 confirming to, din 838, iso 3318, 10103, 10104 & 691.,part no.mdrm-4146, spanner set,double open end;size:41x46 mm;material:chrome, vanadium/carbon steel, 400 amps inverter welding rectifier.model: buddy arc 400i, make esab, l and t, ador, fontec, chain pulley block,5t,10m, make - indef, demag, kito, venus, block,chain pulley;type:p;capacity:2 t;maxi lift:10 m, make - indef, demag, kito, venus, block,chain pulley;type:p;capacity:3 t;maxi lift:10 m, make - indef, demag, kito, venus, self supporting extendable aluminum ladder size; 16feet(closed) to 27, feet (extended), wire rope slings with eye & eye, 25ton x 1 1/4 x 6 mtrs length., make usha martin, steel wire r

Central Government/Public Sector

CTN :39512431

22 Mar, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For bid to ras tender for supply of supply of cassette ac four way capacity 2point5 tr minimum 3 star rating inverter type rotary or scroll compressor aircooled condensing unit with copper cooling coil refer annexure ii-a , supply of cassette ac four way capacity 3 tr minimum 3 star rating inverter type rotary or scroll compressor aircooled condensing unit with copper cooling coil refer annexure ii-a , supply of cassette ac four way capacity 4 tr rating inverter type rotary scroll compressor aircooled condensing unit with copper cooling coil refer annexure ii-a , supply of suitable size refrigerant grade copper piping for 2or2point5or3or 4tr cassette acorsplit ac unit refer annexureii-a , providing flexible pvc duct hose covering pipeof size 60 mm suitable for exposed refrigerant pipes for cassttte ac units refer anexure ii-a , providingcpvc sdr11 pipes 32 mm with 9 mm thick tube type nitrile rubber insulation for refer annexureii-a , providing cpvc sdr11 pipes 25 mm with 9 mm thick tube type nitrile rubber insulation for condensate water drain from the ac indoor units refer annexureii-a , supply of rain proof outdoor duty as per ip-66 electrical control panel with incommer 4 pole mccb 100 amp digital voltmeter digital ammeter indication lamps refer annexureii-a , supply of following size lt power cable with copper conductor xlpeorpvc as directed by eic 4 core - 4 sqmm refer annexureii-a , supply of following size lt power cable with copper conductor xlpeorpvc as directed by eic 4 core - 6 sqmm refer annexureii-a , supply of following size lt power cable with copper conductor laying of the same in by eic 4core - 25 sqmm refer annexure-ii-a , supply of following size lt power cable with copper conductor as directed by eic 4core - 16 sqmm refer annexure-ii-a , supply of copper cable of size 4core - 2point5 sqmm for communication refer annexure-ii-a , supply of perforated hot dipped galvanised iron cable tray of size150 mm width x 50 mm depth x 1point6 mm thickness refer annexure-ii-a , supply of perforated hot dipped galvanised iron cable tray of size 300 mm width x 50 mm depth x 1point6 mm thickness refer annexure-ii-a , installation testing and commissioning of cassette ac four way capacity 2point5 tr minimum 3 star rating inverter type rotaryorscroll compressor aircooled refer annexure-ii-b , installationtesting and commissioning of cassette ac four way capacity 3 tr minimum 3 star rating inverter type refer annexure-ii-b , installation testing and commissioning of cassette ac four way capacity 4 tr inverter type rotary or scroll compressor units refer annexure-ii-b , erection testing and commissioning of suitable size refrigerant grade copper for 2or2point5or3or4tr cassette acorsplit ac unit refer annexure-ii-b , laying of flexible pvc duct hose covering pipe gray colour of size 60 mm suitable refer annexure-ii-b , laying of cpvc sdr11 pipes 32 mm with 9 mm thick tube type nitrile rubber insulation for condensate water drain from the ac indoor units refer annexure-ii-b , laying of cpvc sdr11 pipes 25 mm with 9 mm thick tube type nitrile rubber insulation for condensate water drainrefer annexure-ii-b , erection testing and commissioning of rain proof outdoor duty as per ip-66 electrical control panel annexure-ii-b , laying of following size lt power cable with copper conductor xlpeorpvc insulation pvc inner sheathed armoured extruded pvc oas directed by eic 4 core - 4 sqmm refer annexure-ii-b , laying of following size lt power cable with copper conductor xlpeorpvc insulation as directed by eic 4 core - 6 sqmm refer annexure-ii-b , laying of following size lt power cable with copper conductor as directed by eic 4 core - 25 sqmm refer annexure-ii-b , laying of following size lt power cable with copper conductor xlpeorpvcas directed by eic 4 core - 16 sqmm refer annexure-ii-b , laying of copper cable of size 4 core - 2point5 sqmm for communication refer annexure-ii-b , installing of perforated hot dipped galvanised iron cable tray

Central Government And Public Sector

CTN :38347043

31 Mar, 2025 NA

Trivandrum - Kerala

Tender For corrigendum : providing of custom bid for services - service cum maintenance of keltron make 2 x 500kva power ups at kaps34 2 days for travel and 4 days of working at site,custom bid for services - service cum maintenance of keltron make dcps at kaps34 1 day for reaching to site 1 day for departing kaps site and reaching trivandrum kochi and 3 days of working at site,custom bid for services - service cum maintenance of keltron make inverter at kaps34 1 day for reaching to site 1 day for departing kaps site and reaching trivandrum kochi and 2 days of working at site

Central Government And Public Sector

CTN :39717207

28 Mar, 2025 NA

Dibrugarh - Assam

Tender For supply of welding machine of portable inverter type.( preferably ador champ 200 ). input power capacity in 7 kva , input voltage frequency 50 z. protection class ip 23.make :- ador , esab or similar [ warranty period: 30 months after the date of delivery ]

State Government

CTN :39593959

24 Mar, 2025 NA

Ghazipur - Uttar Pradesh

Tender For corrigendum : 48 volt 3 kva industrial power inverter suitable for 300 ah battery set at 220 kv ss bhadaura under etd ghazipur

Static Inverter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors