Latest stator coil Tenders | Government stator coil Tenders

Central Government/Public Sector

CTN :45076766

14 May, 2026 NA

Bokaro - Jharkhand

Tender For tender for supply of transformer differential numerical relay , shunt trip coil assy 165 ots , contact assy elec fxd 33kv 1000 1250 a , brkr crct dth 800 mccb 400a 3p , brkr crct mccb 200a 415v 4p

CTN :44961942

19 May, 2026 65.76 Lacs

Jhalawar - Rajasthan

Tender For corrigendum : supply of spares for lnt make lt and ht switchgear, breakers and panel accessories of electrical circle and chp circle, csctpp, chhabra - racking handle for cn-cs 5000c, racking handle cn-cs 4000 h2, lockable trip push button type-aa, fixed arcing contact 800 s1, moving arcing contact 800s1, moving arcing contact, 5000c, hardware kit, spring charging, motor 220 v dc, spring charging limit, switch 220 v dc, closing coil 220 v dc, shunt release 220 v, dc, test position microswitch, service position microswitch, mdo to edo 800-, 2500c,3200h1(3p), mdo to edo 3200h1(4p), mdo to edo 5000c (4p), pole assembly 800c d/0, brekaer, door camlock-lhs, door camlock-rhs, racking handle, sic puller tq3 mat.-, delrin500, locking angle -tq3 m, tq3 earthing lip assembly, aux. busbar support, tq+tf2 v, aux.busbarterm assy, tf3,tq3-fr, aux.busbar support assy, tf3,tq3-fr, stainless steel door lock, td3,tf3-fr, bracket ,reset cord mn5 relay, ,tq3, xtension shaft, dropper support assembly, tq3 form iv, safety shutter tq3 d/o, safety shutter opener tq3, d/o, vcb spares 11 kv and 6.6, kv, big gear assembly, small gear -charging gear, assembly 12 kv vcb-25ka, subadha aux switch, (12no+12nc), tripping coil, closing coil, spring charging motor, vcb sds housing wo wire, pin locking channel, assembly, vaccum interrupter abb, vg6, drive rod assembly 800, a,1250a,2000a, vcb racking handle, spring charging handle, tripping rod, pin type channel racking, fixture 600 w, pin type channel racking, fixture 1000 w, breaker shutter assembly, 600 w, breaker shutter assembly, 1000 w, switron, switch,switron, 12no/12nc) aux., switch, rackin handel &, interlock, locking channel, assy 12kv 1250a 40ka, 1000w 3150a locking, channel assembly, limit switch, test/service,omron, make limit, switchmodel: x-, 10gm-b,contacts: 1, c/o, shutter roller, bracket 3150 a, roller for shutter, 3150a 40ka, pin for shutter, roller 3150a 40ka, 3150a breaker arm, contact - finger, contip finger f 2000a, vcb breaker, m4 flat washernylon(, 4.5 x 9, x 0.8mm), x 10-cozn pan head, m/c, screw, spring washer (zc), bottom conductor, arm, assy 12kv 3150a 40ka, top conductor arm, assembly 12kv 3150a, 40ka-abb, vi, 800a breaker arm, 800a vcb contact, finger assy new, flexible conductor, 12kv 800a, 40ka- abb vi, 2000a breaker arm, contip finger f 2000a, ø4 ss e-clips, ø6 ss e-clips, ø8 ss e-clips, ø10 ss e-clips 0.8mm, thk, circlip dia. 12mm, 1 mm, thick, 24 external type, circlip, wire circlip dia. 3.4+0/-, 0.4 ss, m3 x 25 spring pin, m3 x 30 spring pin, x 25 mm cotter pins, x 30 mm cotter pins, spring pin 6.5 dia x 40, long, split pin ø3x35, split pin ø1.8x20, connector type lug, for 800a,1250a,2000a &, 3150a), male connector - dnf, 14-250fim-m, female connector -, dnf 14-250fib-m, kv switchgear vcb, spares for type vk10l40h, rated voltage:12 kv, rated, normal current:800, a,rated s.c breaking, current : 40 ka & type, vk10q40h,rated, voltage:12 kv ,rated, normal current :3150, rated s.c. breaking, current : 40 ka, pds cable asm 12 kv, 800 a, short pds r phase asm 12, kv 800 a, short pds y phase asm 12, kv 800 a, short pds b phase asm 12, kv 800 a, breaker: type vk10l40h,, rated voltage:12kv, rated, normal current: 800a,, rated s.c. breaking, current: 40ka, line pt rack-in/out handle

State Government

CTN :45045467

05 May, 2026 NA

Vidisha - Madhya Pradesh

Tender For enquiry for supply of various item for stm offices situated under gm (o&m) mpmkvvcl vidisha. - tripping coil for bhel (bhel make vcb) with complete plunger assembly, tripping coll for stelmec (stelmec make vcb) with complete plunger assembly, trip coll suitable for cgl (crompton) make vcb with assembly, tripping coll for shreem make vcb with complete plunger assembly, closing coil for stelmec make vcb with complete plunger assembly, closing coil for shreem make vcb with complete plunger assembly, closing coll for bhel make vcb with complete plunger assembly

Central Government/Public Sector

CTN :44855809

09 May, 2026 13.47 Lacs

Sundergarh - Odisha

Tender For corrigendum : supply of spares of prabhu make ht starters for mcl basundhara area : : 5 =5 = - isolator 630a 6 point 6kv on off earth , isolator fixed contact set of 3 , isolator moving contact set of 3 , vaccum contactor 400amp 6 point 6kv grade , diode by255 for vacuum contactor , bottle f vcum cntctr 400amps 6 point 6kv , vacuum contactor closing coil 110v dc , auxiliary switch for vacuum contactor 2n , auxiliary contactor 3no and 1nc 110v , dmc mldd 6 point 6kv insltr fuse , earth leakage relay 30ma 3a w time delay , p t 50va pri 0 110v sec 0 8 12v , ammeter 96sq mm , ammeter selector switch , voltmeter 96sqmm , voltmeter selector switch , push button with element for start sto , lamp holder with lamp on off trip , timer electronics 3sec to 3min on delay , relay overvoltage and undervoltage

State Government

CTN :45046874

08 May, 2026 12.36 Lacs

Multi City - Karnataka

Tender For 1)inspection of stator coil for identification of exact no. of the faulty coil and setting up the arrangements for rotor pole coils removing and rotation as per scope of works along with supply of materials and other consumables as per scope of works2)de-brazing the rotor pole terminations and removing the rotor poles (as required). dismantling of rotor poles using suitable and compatible tools, fixtures, and lifting arrangements. ensure safe handling and proper marking for reassemble. rotate and position the rotor appropriately to access the damaged stator coil area.3)remove insulation from both ends of the affected winding section.4)de-brazing of defective coils. 5)driving out the slot wedges carefully remove wedges from stator winding slots without damaging adjacent coils or core.(entire stator winding shall be inspected in case of loose wedges, worn out wedges and missing wedges shall be replaced) along with supply of materials and other consumables.6)insulation removal- remove insulation from both ends of the affected winding sections.7)cutting the coil bindings in both sides. cut the identified damaged winding portion using appropriate tools. carefully pull out the damaged coil from the stator slots without affecting surrounding windings.8)damaged winding cutting- cut the identified damaged winding portion using appropriate tools.9)winding extraction- carefully pull out the damaged coil from the stator slots without affecting surrounding windings. while removing the faulty coils from stator, utmost care should be taken to prevent any damage to stator core.10)removal of faulty coils from the slot.11)slot cleaning and preparation-clean stator inner tooth slots thoroughly. use emery paper to smoothen and maintain uniform slot condition.12)cleaning of carbon deposits/heavy oil content from complete stator coils through co2 cleaning process /dry ice blasting.13)new coil installation-insert new stator coil with proper alignment. fix securely using new wedges of appropriate grade and size.14)brazing of the coil ends.15)re-fixing the rotor poles and connecting them.16)insulation application-apply insulation as per specified class (e.g. class f/ classh). ensure proper curing and finishing.17)complete co2 / dry ice cleaning of stator and rotor.re insertion of removed rotor poles. 18)final checks & testing- insulation resistance (ir) test, high voltage (hvdc) test, continuity check, visual inspection and any other tests which are required (will be carried out by kpcl).19)assembling of removed damper doors and stator covers.20)maintain quality standards throughout the process & use calibrated tools and approved materials.21)presence of the agency during excitation and synchronization of the unit by kpcl.22)safety & quality-follow all safety procedures and ppe requirements

CTN :45034431

20 May, 2026 NA

Bardhaman - West Bengal

Tender For supply of bottle vacuum interrupter, 3.6kv, 13.1 ka,4 , vcb shunt trip coil , tripping coil , fibre block, 4 in , hydraulic bearing puller, 8 ton

Central Government And Public Sector

CTN :44768700

05 May, 2026 NA

Chittorgarh - Rajasthan

Tender For corrigendum : supply of aux contact , contactor 3 pole , power contactor 32 amp , power contactor 80 amp , contactor 40 amp , contactor 10 amp 220v dc , contactor 10 amp 24v dc , contactor ,220v dc , dc contactor,250a,300v , dc contactor,200a,24v , contactor 63 amp 3pole , contactor 250amp , contactor 580amp , contactor 450amp , mccb 400a , mccb 125a , mccb 100amp , mccb 25amp , mccb 160amp , mccb 125amp , mccb 200a , mccb 10amp , mccb 200amp , mcb 2amp , mcb 6amp , mcb 16amp , mcb 63amp , mcb 32amp , mpcb 3amp , mcb 32amp , mcb 4amp , mcb 10amp , mcb 1amp , mcb 50amp , mcb 40amp , mcb 20amp , mcb 10 amp , mcb 25amp , led red , led yellow , led blue , led green , led white , push button blue , micro switch 16amp , push button black , push button yellow , shunt trip coil , selector switch , lockable selector switch

CTN :44959302

06 May, 2026 NA

Kheri - Uttar Pradesh

Tender For tender for supply of electrical equipment - fuse wire ht for 630 kva t/f 22 swg , fuse wire ht for 400 kva t/f 23 swg , fuse wire ht for 250 kva t/f 26 swg , fuse wire ht for 100 kva t/f 33 swg , fuse wire ht for 63 kva t/f 38 swg , fuse wire ht for 25 kva t/f 40 swg , fuse wire lt for 630 kva t/f 8 swg , fuse wire lt for 400 kva t/f 10 swg , fuse wire lt for 250 kva t/f 12 swg , fuse wire lt for 100 kva t/f 15 swg , fuse wire lt for 63 kva t/f 17 swg , fuse wire lt for 25 kva t/f 21 swg , trip coil for 11 kv pannal (company name) , vaccum intrupter for 11 kv (company name) , crompton make grear for 11 kv , jow contact (11 kv or 33 kv) , relay for 11 kv (vcb make) , silika gel , lt bushing rod for 630 kva t/f , lt bushing rod for 400 kva t/f , lt bushing rod for 250 kva t/f , lt bushing rod for 100 kva t/f , lt bushing rod for 63 kva t/f , lt bushing rod for 25 kva t/f , lug for 630 kva t/f , lug for 400 kva t/f , lug for 250 kva t/f , 120 sq.mm lug , 70 sq.mm lug , 50 sq.mm lug , h.t tape , empired tape

Central Government/Public Sector

CTN :44699122

27 Apr, 2026 42.53 Lacs

Sidhi - Madhya Pradesh

Tender For corrigendum : supply of interruptr assy.complet transfer flex.-part no.- 1127006 , machanism motor wound spring charged 25k-part no.-1435279 , spring charging motor-part no.- 1435530 , mechanism catch 25ka-part no.-1435292 , pt resin cast 3ph 5 limb 6.6kvby110vby63-part no.- 2267718 , anti pumping relay 11 pin 110v ac-part no.- 1901709 , rectifier bridge unit 60by63a 600piv 100v- part no.-1925362 , bus bar spout 12oo amp-part no.- mv3308 , relay e-l 50a 1a 110v ac-part no.-1902284 , idmt relay-part no.-p0083 , shunt trip coil 110 v dc- part no.-2064674 , fuse ht,pt,11kv,5a , block contact 2no for pb-part no.-0190275 , vcb 11 kv 1250a25kambl- part no.-418535 , current transformer 1000-500-part no.-00046a

Central Government/Public Sector

CTN :44947776

23 Apr, 2026 NA

Mumbai - Maharashtra

Tender For supply of stator coil suitable for 230 v ac single inlet blower motor of lhb coaches as per sample [ warranty period: 30 months after the date of delivery ]

Stator Coil Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector