Latest steel alloy Tenders | Government steel alloy Tenders

CTN :41490992

28 Aug, 2025 NA

Pune - Maharashtra

Tender For special heat treated steel alloy round bar of dia. 15mm x 150mm as per spec. no. arde/etwd/dmr/01

Central Government/Public Sector

CTN :41332548

23 Aug, 2025 34.80 Lacs

Ranga Reddy-T - Telangana

Tender For corrigendum : tender for supply of procurement of raw materials c c - austenitic type (303 se) free machining non-magnetic bright quality stainless steel hexagonal bar conforming to hal std 1206 / 303 se , astm a 582 / ams 5641 / ams 5640 type 2 / mil-s-7720 , 303 se / bs 303 s 41 , bs 970 / aisi 303 se size a/f 6 mm x 2 to 3 meters in length. , brass round hal std 1301 , is 319 , type-1 1/2hard , dia 4mm x 2 to 3 meters length , half finished brass material tube dia 4 x 0.5 of 1000mm hal std 1307/is407-81 grade cuzn37 , naval brass rods , condition annealed , conforming to is 291 1989 , grade 1 , / hal std 1302 / bs 2824 gr cz-112 , size dia 4mm x 2 to 3 meters in length , cold rolled brass sheet , strip& foil th cond half hardcuzn37 , is 410/c27200 , astm b36/cz108 , bs2870/cu zn 37 , cw508l-en1652-r350/ th. 0.2 mm , min. size 350 x 1200 mm. hal std 1300-hb. it should be protected with pvc coating morethan 50micro on both sides , cold rolled brass sheet , strip& foil th cond half hardcuzn37 , is 410/c27200 , astm b36/cz108 , bs2870/cu zn 37 , cw508l-en1652-r350/ th.0.4 mm , min. size 350 x 1200 mm. hal std 1300-hb. it should be protected with pvc coating morethan 50micro on both sides , rivetting quality brass wire conf.hal std 1303 , is 4413-cuzn-37 annealed condition dia 4mm , bare copper wire , condition annealed , conforming to hal std 6054 grade b / is 8130 / bs 128 / astm b-3 , size dia 0.5 mm in spools , alluminium alloy sheet , hal std 1252-1/2h , confirming to is gr 31000(ns3) is 737 en 573-3-3003 or 3013 , dh bs 1470 - 3103 h-14 (ns-3) - 1/2h (h4) , size thickness 1.0 x 1000 x 2000 mm with pvc coating on both sides. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 th.thickness 12 mm , min. size 1000x1000mm , tolerances as per ansi h35.2/ hal std. 1250 , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 14 mm , min. size 1000x2000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 16 mm , min. size 1000x1000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy sheets , spec. 2014/2014 a-t6 /wp , cladding 1050 a /1070/19500/19700/6003 on both sides as per bs l165/bs l167 / en 4400- 2/en 2087/gr 24345-wp al.clad , is 3436/al.clad 2014 , astm b209/ams 4029 clad/hal std 1250 , th.thickness 2.0 mm , min. size 1000x1000mm , tolerances as per ansi h35.2/ hal std.1250. it should be protected with transparent pvc coating morethan 50micro on both sides. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 6.0 mm , min. size 1000x2000mm , tolerances as per ansi h35.2/ hal std.1250. , one side/two sides polished(ra 0.2 micro m) non-fading black electro coloured anodized ( as per mil-a-8625 , type ii , class 2 ) sheet aluminium specification hal-1255 condition 3/4 hard or is737-19000- h6 size thickness 0.5 mm x 300mm x 300mm , ptfe/teflon round conforming to hal std 6251 mil-p-19468a or astm-d-1710 , grade-ii , type -3 , class-d dia 6 mm x 500 mm in length , nylon round type -66. dia 12 mm.hal std 1851 , glass epoxy laminated sheet , conforming to hal std 1807 , nemali -1- 98 , gr fr4 / bsen 60893 - 3- 2 epgc 202 / bs 3953 type ep4 / mil - 1 - 24768 / 27 type gee - f(fr4) size thickness 1.5 mm x 1220 mm x 1220 mm. , copper claded glass epoxy laminates conf. to ipc-4101 b/26 with tg greater than or equal to 170 degree c with 1 o

State Government

CTN :41391853

30 Aug, 2025 3.20 Lacs

Guntur - Andhra Pradesh

Tender For supply of high density thermocol , copper wire , polystyrene sheet , brass sheet , copper sheet , oilraw linseed , liquid silicone rubber , nc putty , oil paint , sandpapers , adhesive , stainless steel , copper wire , arm cortex with cable , arduino mega , arduino uno with cable , rf module , rfid em18 , resberry pico with cable , gps , esp32s with cable , colour sensor , arduino nano , nodemcu with cable , soldering kit , max30100 , hydrochloric acid , l298n motor driver , mq sensor , dc geared motor , adxl345 , metal detector , dht11 , ultrasonic sensor , rain sensor , water sensor , sound sensor , vib sensor , soil moiture sensor , male to female jumper , female to female jumper , lm35 , copper clad laminate 100 x 70 x 1.5 mm 30 pcs set , ldr sensor , ir sensor , lm2596 , touch sensor , teensy development board , flysky transmitter with receiver , aocoda flight controller for huafei , bldc motor 1000kv , 30a esc , radiolink transmitter with receiver , touch lcd shield , tft display shield , raspberry pi pico , camera development board , battery charger with wire 2 cell , imax b6 80w 6a charger discharger , ultra torque gear servo motor , high torque stepper motor , magnetic encoder sensor module , speak voice recognition , zero board , acrylic sheet 1 , acrylic sheet2 , acrylic sheet3 , mdf1 , mdf2 , mdf3 , adhesive 1 , fevicol , canvas fabric , teak wood , pvc pipe , pvc joint 1 , pvc joint 2 , pp granules , ldpe granules , pla 1 , pla 2 , pla 3 , pla 4 , sand paper 1 , sand paper 2 , sand paper 3 , sand paper 4 , pvc sheet , thiner , screw , nail , aluminium sheet , mdf 1 , mdf 2 , acrylic1 , acrylic2 , sandpapers 5 , sandpapers6 , nc thinner , masking tape ) /bid number : gem/2025/b/6425749 * /dated: 08-08-2025 & & / bid document 1 / 66

CTN :41395865

21 Aug, 2025 NA

Gurdaspur - Punjab

Tender For supply of specification document , compressor for deep freezer 400 ltr as per specification document , compressor for refrigeraor 300 ltr make lg or videocon or voltas or samsung , compressor for refrigerator 210 ltr make lg or videocon or voltas or samsun , contactor for star delta starter 3 ph 415 volts as per specification document , contactor for star delta starter 4 pole mnx 60 as per specification document , contactor for star delta starter 4 pole mnx 70 as per specification document , contactor ml 3 with 4 pole suitable for 60 hp electric motor starter , coolant for dg set , copper lugs long barrel 100mm size 185 sqm as per specification document , copper lugs long barrel size 240 sqm make dowells or action or ascon , copper lugs size 25 sqm make dowells or action or ascon , copper lugs size 35 sqm make dowells or action or ascon , copper lugs size 50 sqm make dowells or action or ascon , copper lugs size long barrel 100mm 120 sqm as per specification document , copper lugs size long barrel 100mm 300 sqm make dowells or action , decorative post top lantern for 360 degreeas per specification document , epr ht insulation tape 50mm wide 09 m long , gang box with switch socket combination 15 or 16 amp , geyser indicating lamp as per sample , heating element for geyseras per specification document , isolator 63 amp 4 pole as per specification document , isolator fp 100 amps as per specification document , male and female contact for 11 kv god as per specification document , metal clad industrial plug socket 20 amp as per specification document , metal clad industrial plug socket 32 amp as per specification document , over load relay for water cooler 40 by80 ltrs , plug top 3 pin 15 or16 amp make anchor or philips or bajaj , pvc casing caping 20 mm as per specification document , pvc casing caping 25 mmas per specification document , pvc conduit pipe 20 mm 2 mm thick as per specification document , pvc conduit pipe 25 mm 2 mm thick as per specification document , pvc insulation tape 20mm and 25mtr long make steel grip or plaza , pvc insulation tape 25mm and 25mtr long make steel grip or plaza , refrigerant gas r134a 450 ml bottle , relay over load for water cooler 60 by120 ltrs , relay starting with olp for refrigerator , backlite sheet 10 inch by 12 inch prelaminated , backlite sheet 4 inch by 4 inch prelaminated , backlite sheet 7 inch by 4 inch prelaminated , backlite sheet 8 inch x 10 inch prelaminated , ceiling rose 3 terminals make anchor or philips or havels , continuous hinges 30mm width x 7 feet length , copper mess strip for god 400 amp set of 03 make rastriya , fan regulator electronic make anchor or philips or havels , isolator 40 amp 4 pole make havels or c and s or standard , isolator 63 amp 4 pole make havels or c and s or standard , jumper and washer 15mm , jumper and washer 20mm , main switch spn or tp 63 amp make havels or c and s or standard , main switch tp 100 amp make make havels or c and s or standard , piano switch one way 05 or 06 amp make anchor or philips or havells , piano switch two way 05 or 06 amp make anchor or philips or havells , piano type switch one way15 or 16 amp make anchor or philips or havells , plug three pin 6 amp make anchor or philips or havells or bajaj , pvc connection 15 x 300 mm as per specification document , pvc connection 15mm x 450mm longas per specification document , pvc connection 15mm x 600mm long as per specification document , pvc insulation tape 25mmx25mtr make steel grip or plaza aluminium lugs 120 sqmm, aluminium lugs 185 sqmm, aluminium lugs 35 sqm, aluminium lugs 70 sqm, aluminium thimble lugs of size 25 sqmm, aluminium thimble lugs of //bid details 2 / 75

Central Government/Public Sector

CTN :41332916

27 Aug, 2025 20.64 Lacs

Bangalore - Karnataka

Tender For tender for supply of procurement of bars : : - bar hex a f 7 mm stainless steel , bar dia 7 mm steel , bar dia 10 mm , bar dia 72 mm , steel alloy bar dia 75mm , stainless steel rod dia 82 point 55 , bar dia 140mm alluminium alloy , nitriding steel bar dia 54mm , bar dia 65 mm steel , c r steel bar dia 175mm , steel alloy bar dia 37mm , steel alloy bar dia 25mm , steel alloy bar dia 10mm , steel alloy bar dia 10mm , bar dia 10 mm nickel alloy

CTN :41314941

12 Aug, 2025 NA

Pune - Maharashtra

Tender For special heat treated steel alloy round bar of dia. 15mm x 150mm as per spec. no. arde/etwd/dmr/01

CTN :41221685

14 Aug, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply erection testing and commissioning of equipments at 132/33kv grid station canal - supply of main equipments at 132/33kv grid station canal, auxillary transformer 33/0.433kv, 250kva 3-phase distribution transformer with bimetallic terminal connectors energy level-2, copper wound, battery bank 110 v,300ah of 55 no cells of 2 volt each,sealed maintt. free vrla type, high impact polyprophelene co-polymer container, flame retardant, 110v battery charger (3-phase) (i) float charging and load current ratings 30a/60a/70a/100a at 220v to 252v dc (ii) boost charging current rating : 50a/55a/60a/70a/80a/100a at 198v to 296/302v dc, 33kv vcb indoor type, 1600a with offered operating mechanism. complete in all respects fitted with indoor ct of ratio 1200-600-300/1-1a with 1 spare vacuum interruptor and one indoor type ct set . the vcb shall be compatabile for installation with bus bars of existing indoor type (1+2)bank, 33kv control and relay auxilliary panel completely wired including sub-station automation supporting ieds/numerical relays of make abb/siemens/ge micom/alstom/schneider with iec 61850 compatibility, 70sq.mm 3 core aluminium cable, 1.1kv grade, unarmoured, pvc insulated stranded conductor frls type, 2-core, 6 sq.mm, 1100v, pvc insulated, pvc sheathed, frls, galvanised steel wire/strip armoured stranded copper conductor control cable complete, iron clad change-over switch 300a ( 3 phase), ms-round bars 40mm dia, gi flat (ms) 50x6mm, earth-pit (treated) 3m, cable termination kits 300 sq. mm outdoor, erection of main equipments and write back of dismantled equipments to the divisional store janipur, auxillary transformer 33/0.433kv, 250kva 3-phase distribution transformer with bimetallic terminal connectors energy level-2, copper wound, battery bank 110 v,300ah of 55 no cells of 2 volt each,sealed maintt. free vrla type, high impact polyprophelene co-polymer container, flame retardant, 110v battery charger (3-phase) (i) float charging and load current ratings 30a/60a/70a/100a at 220v to 252v dc (ii) boost charging current rating : 50a/55a/60a/70a/80a/100a at 198v to 296/302v dc, 33kv vcb indoor type, 1600a with offered operating mechanism. complete in all respects fitted with indoor ct of ratio 1200-600-300/1-1a with 1 spare vacuum interruptor and one indoor type ct set . the vcb shall be compatabile for installation with bus bars of existing indoor type (1+2)bank, 33kv control and relay auxilliary panel completely wired including sub-station automation supporting ieds/numerical relays of make abb/siemens/ge micom/alstom/schneider with iec 61850 compatibility, 70sq.mm 3 core aluminium cable, 1.1kv grade, unarmoured, pvc insulated stranded conductor frls type, 2-core, 6 sq.mm, 1100v, pvc insulated, pvc sheathed, frls, galvanised steel wire/strip armoured stranded copper conductor control cable complete, iron clad change-over switch 300a ( 3 phase), ms-round bars 40mm dia, gi flat (ms) 50x6mm, earth-pit (treated) 3m complete including civil works as per drawing, cable termination kits 300 sq. mm outdoor, civil work construction of foundation for auxilliary transformer complete as per drawing (7cum), tool kit

Steel Alloy Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector