Latest steel canopy Tenders | Government steel canopy Tenders

State Government

CTN :41755517

16 Sep, 2025 26.33 Lacs

Bengaluru - Karnataka

Tender For providing flooring, toilet renovation, sanitary and plumbing fittings, painting, covered steel canopy and other allied works to kilare cafe at basement, lh-2 3rd stage, legislators house, bengaluru

Central Government/Public Sector

CTN :41741837

10 Oct, 2025 NA

Mumbai - Maharashtra

Tender For supply of stainless steel flat moulding size: 1 x 30 x 200 mm to icf drg. no. icf-std-4-3-017, alt-a / nil, item-1. material as per drawing.

CTN :41512711

08 Sep, 2025 11.30 Lacs

Thiruvananthapuram - Kerala

Tender For supply and installation of open gym equipment at panniyannur grama panchayath in thalasseri lac, kannur - retender - open gym equipment, od84136/2025-2026 : single bar - supply and installation of single bar having the following specifications: dimensions: (l x w x h) 3550 x 2590 mm. main frame - made from ø 48 mm od “b” class g.i. pipe. frame of single bar – ø 33 mm od “b” class g.i. pipe. foundation plate – m.s. round plate of ø 250 mm & 8 mm thick. top closing cap’s - decent design size pp / hdpe / ms. material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart – made from aluminum / stainless-steel stick-on product. all joints must be robotic welded and zinc primer paint should be applied at all the welding points prior to finishing, od84137/2025-2026 : horse rider - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - ø 114 mm od “b” class gi pipe. foundation plate – m.s. round plate of ø 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame – is made by ø 48 mm od “b” class gi pipe. seat frame – is made by ø 48 mm od “b” class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of ø 48 mm od “b” class g.i. pipe. angle between link and ground position is 10-20 degree. handle - ø 33 mm od “b” class gi pipe. paddle vertical support - ø 60 mm od “b” class gi pipe. handle frame- ø 42 mm od “b” class gi pipe dually bending design. foot pipe - ø 33 mm od “b” class gi pipe. support frame – 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap – pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - ø 60mm od seamless pipe. pin – made of ø 25 mm m.s. bright bar. grips - high quality rubber ø 46 mm od. circlips – a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be robotic welded and zinc primer paint should be applied at all the welding points prior to finishing, od84138/2025-2026 : arm and paddle bike - supply and installation of arm and paddle bike having the following specifications: dimensions: (l x w x h) 990 x 500 x 880 mm. main frame –100 mm x 50 mm x 2.5 mm rectangular cr pipe with bending design. foundation plate – m.s. round plate of ø 250 mm & 8 mm thick. handle – ø 33 mm od “b” class gi round pipe dully bending design. side and top cover – 1.6 mm thick ms laser cutting profile is used. seat – 380 x 275 x 60 mm thick hdpe blow moulding. paddle –100 mm x 50 mm capsule pipe and 40 x 16 mm ms flat should be used for connecting the paddle and shaft. closing cap’s – pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing bushes - ø 60 mm od seamless pipe. bearing - use is 6005 permanent lubricating sealed reputed brand. shaft -made up of ø25mm od ms bright bar. circlips– a 24 circlips ar

Central Government/Public Sector

CTN :41688128

19 Sep, 2025 NA

Karaikal - Pondicherry

Tender For purchase of crucible furnace , moulding sand 40 kg per bag , moulding box cope and drag (wooden) 250*250*75,250*250*50 (in mm) , flange patten (aluminium) , gear wheel (aluminium) , hand wheel (aluminium) , vent wire (galvanized iron) height 250 and 2.5 mm diameter , trowel , runner pin 200 mm height , raiser pin 150 mm height , strike-off bar 300*50*20* (l*w*t) in mm , draw spike , shovel (hand) , riddle , mallet (wooden) 60 diameter *140 length , lifter (galvanized iron) 1 feet height , slick , swab , gate cutter , bellow - medium , core box (wooden) 25 mm diameter *300 mm length , spirit level 1 feet , flat tongs 18 inch , round tongs 18 inch , square tongs 18 inch , inside caliper 6 inch , outside caliper 6 inch , been rammer (small) , sprinkler , bellow air motor hp , crucible , fire cock 40 kg per bag , furnace air pipe 50 mm diameter and length 2 feet , furnace round type fire bar 12 mm or above diameter * 200 mm or above length , mild steel rod 6 mm diameter *250 mm length , slag remover spoon small size , square tray mild steel plate ( 1 1 feet) , centrifugal air blower 3 hp or above, 3 phase , aluminium material 5 kg , transportation and packaging cost , goods and services tax on s. no. 01+02+03 .+40 @ _______________________% , grand total of the product (s. no. 01+02+03 .+40)

Central Government / Public Sector

CTN :41653424

15 Sep, 2025 NA

Tirupati - Andhra Pradesh

Tender For supply of stainless steel channel moulding

CTN :41557279

18 Sep, 2025 NA

Ayodhya - Uttar Pradesh

Tender For dismantling & repairing of v.t pump 150 cusec pump no 4 after removing h.t. motors then opening pump coupling, motor stool, driving coupling thrust bearing delivery pipe joints & lifting column pipe shafts tubes rubber bearing spiders sleeves etc. all component up to bell mouth of pump, muff coupling of stainless steel material as per original sample for jointing intermediate shaft, impeller of pump by opening & taking out all the twisted and rubbed vanes, straightening the twisted vanes and welding on rubbed portion by high quality s.s. welding electrodes & grinding etc. for giving it, it is original shape and size fitting vanes in impeller body using new lock washers balancing the impeller complete on precision machines its cartage from site to suitable work shop and back.,ratchet pin housing with cutting rubbed portion welding with c.i. welding rod with proper method, then machining from different angle on precision machine to bring it proper shape & size, neck ring assembly of pump by casting, moulding, turning, finishing to proper size as per specification/sample including cost of all materials, labour, casting forma making including carriage of job sample from site to suitable workshop and back.and erection & commissioning of repaired pump with column pipe, housing pipe, impeller shaft, bowl assembly, spider etc. including assembling of pump by repairing all repaired neck ring, rubber bearing etc. and erecting all above parts of pump in the suction sump including all t&p, labour etc. at ayodhya pump canal vikramjot vasti

Steel Canopy Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector