Latest steel conductor Tenders | Government steel conductor Tenders

State Government

CTN :41768805

10 Oct, 2025 NA

Parganas - West Bengal

Tender For empanelment tender for manufacturers of acsr squirrel conductor (20 sq. mm.),acsr weasel conductor (30 sq. mm.),acsr rabbit conductor (50 sq. mm.) and acsr dog conductor (100 sq. mm.)

corporations/Associations/Others

CTN :41516898

15 Sep, 2025 NA

Mirzapur - Uttar Pradesh

Tender For corrigendum : supply of de-centralized materials and works for increasing capacity and installation of tf under business plan 2025-26, edd-kachhawa - supply of following decentralized materials provide by contractor at the works site as per resspo norms., stone pad 300x300x75 mm, x-arms holding clamps with bolts & nuts, f-bracket with bolts & nuts, top, dropper channel clamp with bolts & nuts for st pole, top, dropper, t-off channel clamp with bolts & nuts for pcc pole, p.g clamps for weasel conductor, danger board with clamp & bolts, dead end clamp for pole/bracket with nuts & bolts, eye- hook, suspension clamp with nuts & bolts, j hook, all. binding wire 6 mm, 1x35 sq mm ac cable (xlpe), three phase distribution box, three phase distribution box clamp (ls), e-bracket with nuts & bolts, copper l-piece 50x225x10 mm, copper l-piece 62x225x12 mm, all lugs 240 mm2, all lugs 120 mm2, all lugs 70 mm2, stay clamp with nut & bolts for st pole, stay clamp with nut & bolts for pcc pole, stay insulator, cartage of following materials from esc, mirzapur provided by department to work site including loading & unloading charge., st poles 11 mtr long, pcc poles 8.5 mtr long, all line materials with acsr weasel conductor, arial bunch cable 3x50+1x35+1x16 mm2, arial bunch cable 3x95+1x70+1x16 mm2, transformer 250 kva, transformer 100 kva, transformer 63 kva, transformer 25 kva, erection, erection of single support st/pcc pole for construction of 11 kv/lt line including digging of pit, fitting of all accessories, back filling of earth & others required work as per resspo norms., grouting of pole with 1:4:8 ratio of cement sand & brick ballast as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), grouting of stay sets including digging of pit with 1:4:8 ratio of cement sand & brick ballast as per resspo norms, fixing binding and nuzzling of stay wire. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), earthing of poles as per resspo norms, stringing & sagging of 3 phase 11 kv line upto proper sag including laying of acsr weasel conductor, binding with insulators & jumpering as per resspo norms, laying, streaching of arial bunch cable size 3x50+1x35+1x16 mm2/ 3x95+1x70+1x16 mm2 as per resspo norms, erection of sectional double pole structure of st pole for distribution t/f, including digging of pit, fitting of all accessories, earthing of pole, back filling of earth, grouting of each pole & stay sets & other required works as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), erection of sectional double pcc pole structure for distribution t/f with the help of one pole already erected including digging of pit, fitting of all accessories, earthing of pole, back filling of earth, grouting of each pole & stay sets & other required works as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), construction of transformer plinth for 250 kva transformer of 2x2x1.5 mtr. including the work of excavation for foundation of plinth plastering of walls and finishing including cost of all materials., well type earthing of 250 kva transformer by using b class g.i. pipe of 1.5 " dia and making hand pipe type earth boring iind strata of water or 60 ft. whichever is deeper about 6" of g.i. pipe shall remain above ground level 2 no. g.i. earth clamp shall also be welded to the portion of pipe which is above the ground level. through this g.i. clamp and g.i. strip 30x5mm duly galvanized shall be connected with nut & bolts. every dt shall have 2 such earthing, one earthing for t/f neutral and second earthing for t/f body. all requred materials shall by provided by the contractor., fencing of t/f with m.s. square mesh welded/fixed on m.s. angle of size 65x65x6 mm wi

corporations/Associations/Others

CTN :41525709

15 Sep, 2025 NA

Mirzapur - Uttar Pradesh

Tender For : details supply of de-centralized materials & works for increasing capacity & installation of t/f under business plan 2025-26 edd-chunar - supply of following decentralized materials provide by contractor at the works site as per resspo norms., stone pad 300x300x75 mm, top, dropper, t-off channel clamp with bolts & nuts for pcc pole, e-bracket with nuts & bolts, copper l-piece 50x225x10 mm, copper l-piece 62x225x12 mm, all lugs 240 mm2, all lugs 70/95/120 mm2, stay clamp with nut & bolts for pcc pole, stay insulator, cartage of following materials from esc, mirzapur provided by department to work site including loading & unloading charge., pcc poles 8.5 mtr long, line materials with acsr weasel conductor, transformer 250 kva, transformer 100 kva, transformer 63 kva, transformer 25 kva, erection, erection of sectional double pcc pole structure for distribution t/f with the help of one pole already erected including digging of pit, fitting of all accessories, earthing of pole, back filling of earth, grouting of each pole & stay sets & other required works as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), construction of transformer plinth for 250 kva transformer of 2x2x1.5 mtr. including the work of excavation for foundation of plinth plastering of walls and finishing including cost of all materials., well type earthing of 250 kva transformer by using b class g.i. pipe of 1.5 " dia and making hand pipe type earth boring iind strata of water or 60 ft. whichever is deeper about 6" of g.i. pipe shall remain above ground level 2 no. g.i. earth clamp shall also be welded to the portion of pipe which is above the ground level. through this g.i. clamp and g.i. strip 30x5mm duly galvanized shall be connected with nut & bolts. every dt shall have 2 such earthing, one earthing for t/f neutral and second earthing for t/f body. all requred materials shall by provided by the contractor., fencing of t/f with m.s. square mesh welded/fixed on m.s. angle of size 65x65x6 mm with gate hinges & shutter assembly, of over all size 3x3x2.5 mtr as per drawing including cost of all materials., mounting of 25 kva transformer as per resspo norms, mounting of 63 kva transformer as per resspo norms, mounting of 100 kva transformer as per resspo norms, mounting of 250 kva transformer as per resspo norms, cartage of received back 10 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 16 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 25 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 63 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 100 kva transformer from work site to esc, mirzapur including loading & unloading charge

State Government

CTN :41689802

03 Oct, 2025 18.07 Crore

Hubli - Karnataka

Tender For manufacture and supply of rabbit & weasel acsr conductor

State Government

CTN :41692016

19 Sep, 2025 15.75 Lacs

Siliguri - West Bengal

Tender For procurement of composite hardware fittings for acsr weasel or rabbit conductor (30 or 50 sq mm)

CTN :41587309

16 Sep, 2025 5.49 Crore

Gorakhpur - Uttar Pradesh

Tender For supply of supply and fixing of odop cfc plant and machinery for wooden furniture d d - air compressor stand machine , high speed beam saw with optimization software , single sided high seed auto edge bander pre , hydraulic cold press - 50ton and 2 cylinders , triple head multi boring 21x3 - 63 spindles , cnc router- working area 1300 mm x 2500 mm , panel saw 3200x410mm - 7.5hp motor , semi-auto curvilinear edge bander 0.5-2mm , dust collector 7.5hp double bag heavy duty , dust collector 5hp double bag heavy duty , dust collector 3hp double bag , 250 kva transformer level-02 , st pole 11 mtr. long , acsr weasel conductor , gi pipe , 11 kv pin insulator with pin , 11 kv pin insulator with fitting , v type 11 kv x arm , earthing complete , 11 kv 3x70 sqmm cable uppcl approved make , cable joining kit 3x70 sqmm uppcl approved make , 11 kv tpmo fixing with all material , stay complete , t-off channel , top channel , cu. z clamp , f-bracket , droper angle , clamp for top droper x-arm and t-off and cable support clamp , nut bolt of different size , erecion of double pole structure on st pole 11 mtr , laying of 3x70 sqmm xlpe cable with gi pipe , erection of single st pole 11 mtr , erection of earthing of pole with g.i. wire and rod , chemical earthing of 250 kva distrution transformer , making of 11 kv xlpe indoor kit and outdoor kits in taping of cable providing fixinging and crimping of proper size good quality lugs , painting of pole by double coating aluminum and red oxide paint , fabrication errection commissioning and testing of 250 kva , construction of t or f plinth of size 2x2x1.2 mtr , grill fencing of 11 or 0.4 kv , 500 cft-i and c - seasoning kiln steam heated , 500 cft-i and c - installation and commissiong charges , wk-610 20 hp 15hp 3hp 1 or 2h - auto double surface planer , wr-20 15hp 2hp - straight line rip saw , cc-06-08-hydraulic - hydraulic clamp carrier , an-030-5 mtr- auto glue spreader , hs-625ts - tilting spindle shaper 7.5hp , fsm-520at - four side moulder with five , yr-750 - sliding head router , yrt-115 - rectangular tenoner , yom-120 - oscillation mortiser , hcs-18-w or all optionspneumatic cross cut off saw , dt-1136 - automatic copy shaper , gs-6213-with frequency control - double face glue spreader , pr-52nda - spiral cutter head planer sander , cdt-3155a - cnc dovetail tenoner , servokon make 100 kva 250- 480 or 400v 3 phase digital micro , civil work for seasoning plant , genset 160 kva //bid details 2 / 46

CTN :41573703

08 Sep, 2025 NA

Rajouri - Jammu And Kashmir

Tender For supply, installation, testing and commissioning of new dedicated 11kv feeder on 09mtr st poles with acsr weasel conductor for tac hq pungthal keeri frm 33/11kv , 6.3mva r/stn doongi keeri.

CTN :41526220

10 Sep, 2025 19.90 Lacs

Vijaypur - Jammu And Kashmir

Tender For supply erection, testing and commissioning of 25 kva sub stations along with ht/lt line at village markoli panchayat taloor of samba, sc basti nehari panchayat samlah and laying of lt line on 8 mtrs pcc poles using acsr weasel conductor at different

State Government

CTN :35080784

18 Sep, 2025 NA

Rajkot - Gujarat

Tender For corrigendum : bird flight diverter without led (non led type) and with led (led type) suitable for various 11 kv and lt overhead line with acsr conductor (size from weasel to dog)/aaa conductor (size from weasel to dog) to mitigate the collision or electrocution of great indian bustard (gib) with distribution line as per specification.

Steel Conductor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

State Government

State Government

State Government