Latest steel conduit Tenders | Government steel conduit Tenders

State Government

CTN :39978146

23 Apr, 2025 20.00 Lacs

Obaidullaganj - Madhya Pradesh

Tender For notice invting tender for supply of material - cement ppc (isi marked material) , iron 6mm, 8mm, 10mm, 12mm, 16mm (isi marked material) & tmt ,, narmada sand ,, gitti black trap 20mm ,, gitti black trap 40mm ,, alanga size (25cmx25cm) (9"x9") ,, boulders ,, copra/murum ,, jeera gitti (black trap) ,, gitti dust (black trap) ,, oil bond distemper ,, paint oil ,, exterior emulsion , interior emulsion , putty , cement primer , wood primer , profile g.i. sheet (size 5mm thickness, 1.20 mtr width, 3 mtr length) (isi marked material) , vitrified tiles for floor double charge (size 2x2) , vitrified tiles for bathroom (size 2x2) , brick (clay) open kiln grade-1 (size20x10x10cm) , gi wire , steel gate grill etc. fabrication from iron sheet, angle iron and square rod including welding , hollow ms pipe material tuss etc. fabrication and welding including welding

Central Government/Public Sector

CTN :39822931

15 Apr, 2025 NA

Bengaluru - Karnataka

Tender For corrigendum : supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial k

Central Government/Public Sector

CTN :39916173

21 Apr, 2025 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of one set of stainless-steel pipes consisting of four items 1) stainless steel pipe 1" od - 6 mtr 2) stainless steel pipe 3/4" od - 6 mtr 3) stainless steel pipe 1/2" od - 6 mtr 4) stainless steel pipe 10 nb-6 mtr material & specification as per icf/md/spec-166 rev. no. : 04 [ warranty period: 30 months after th e date of delivery ]

Trust

CTN :40009631

22 Apr, 2025 NA

Puri - Odisha

Tender For development of koilibaikuntha garden of shree jagannatha temple, puri such as providing, fitting and fixing of aluminum caging over stainless steel pipe frame,s.s railing in the balance area of garden for monkey menace protection and other repair works.

State Government

CTN :39999365

21 Apr, 2025 1.44 Crore

Changlang - Arunachal Pradesh

Tender For supply of material under mgnrega 2025-26 - ordinary portland cement-dalmia/star, sand, stone aggregate 40mm, stone aggregate 20 mm, plywood/ local wood, iron angle post, gi pipe 1/2'' ( 6 mt), gi pipe 2''( 6mt), gi nipple 4'' dia, gi valve 4'', gi socket 2", gi socket 1/2'', bib cock (steel), spade, jumper, local dao, axe, gi barbed wire, wooden ballies post (100-300 dia, 2-8 m, u-nail, cib (3'x4' feet), tarpauline 12x16 ft, first aid box (handyplus, savlon, cotton gauge, cotton,bandage.antiseptic oint,analgesic spray tablet,dettol ors,anti daurrhoeal,eye drop nasal drop).

Central Government/Public Sector

CTN :40004320

03 May, 2025 NA

Narsinghpur - Madhya Pradesh

Tender For tender for supply of hand tools for mechanical maintenance - pipe wrench , 12in(300mm) , pipe wrench , heavy duty , 600mm , side cutting plier , insulated , 200mm , nose plier , insulated , 6in , hammer , double face sledge , 3.61-3.8kg , chisel , cold flat , 200x20mm , chisel , cold cross cut , 150x10mm , ring spanner , slogging , 70mm , ring spanner , slogging , 80mm , ring spanner , slogging , 85mm , ring spanner , slogging , 90mm , ring spanner , slogging , 95mm , ring spanner , slogging , 100mm , ring spanner , slogging , 105mm , spanner , slogging ring , alloy , 75mm , ring spanner , slogging , cr-v stl , 95mm , open end spanner , slogging , 100mm , spanner , slogging ring , dhs , alloy , 85mm , wrench , slogging open , open jaw , alloy , 61mm , spanner , slogging ring , dhs , alloy , 61mm , spanner , so , open jaw , alloy , 68mm , spanner , slogging ring , dhs , alloy , 68mm , wrench , so , open jaw , alloy , ph , 72mm , spanner , slogging ring , dhs , alloy , 72mm , open jaw wrench , slogging , 76mm , spanner , slogging ring , dhs , alloy , 76mm , wrench , so , open jaw , alloy , 77mm , spanner , slogging ring , alloy , 77mm , spanner , slogging ring , dhs , alloy , 78mm , wrench , so , open jaw , alloy , 78mm , spanner , slogging ring , dhs , alloy , 86mm , wrench , so , open jaw , alloy , 86mm , wrench , so , open jaw , alloy , 112mm , spanner , slogging ring , dhs , alloy , 112mm , wrench , pipe , is 4508 , 36 , spanner , adjustable , 18 , plier , flat nose , alloy steel , 6 , chisel , flat , 18 , 25mm , allen key set , 1-27mm , allen key set , 1/16-3/8mm , 1/2sq hex socket set , ext. circlip plier , straight nose , 7 inch , int. circlip plier , straight nose , 7 inch , open jaw spanner , double ended , 30x32mm

Central Government/Public Sector

CTN :40013412

10 May, 2025 NA

Kothagudem - Telangana

Tender For supply of bricks,10mm stone aggregates,20mm stone aggregates,40mm stone aggregates,coarse sand,fine sand,moorum filling material,portland cement,paint primer,distemper paint,acrylic smooth exterior paint,synthetic enamel paint,cement base wall care putty,roller brush,100mm brush,tmt bar 12 mm 550 kg 10mm 30kg and 08 mm 130 kg,binding wire,rectangular hallow section pipe 50x25x2.50 mm,gi plan sheet barge board upto 300 mm and gutter 600 mm over all girth,cgi precoated galvanised iron sheet 10x3 15 nos,cgi precoated galvanised iron sheet 6x3 5nos,self screw,welding rod,4 inch cutting blade,iron angle frame for door angle size 40x40x6 mm,wooden door 35 mm thick shutters,iron angle window size 1.2x1.2 mtr with grill bar and glass panes fix with silicon complete all fitting accessories,tower bolt,handle,aldrop,false ceiling,4 mm dia steel wire rope lock u clamp set pu coated,aluminium with stainless steel ss coating 4 ftx 3 mtr maintenance ofsquito net wire and meshs,contractor mason labour electrification charge for construction of maintenance of

State Government

CTN :40000954

12 May, 2025 NA

Chennai - Tamil Nadu

Tender For procurement of pipe carbon steel - 6 items

Central Government/Public Sector

CTN :40007715

08 May, 2025 NA

Ranchi - Jharkhand

Tender For civil engineering works, material handling facilities inter plant pipe line and auxiliary buildings required for installation of stamp charge battery no. 12 proper at sail-iisco steel plant (isp), burnpur, west bengal.

State Government

CTN :39711294

28 Apr, 2025 NA

Manuguru - Telangana

Tender For corrigendum : supply of t and p materials for cam division/stage-i and ii/btps.-supply of t and p materials for cam division/stage-i and ii/btps.- heavy duty general purpose hydraulic jack,capacity:5ton,, stroke:150mm,model:xl00, hydraulic jack:, capacity:20ton,stroke length :12mm,jack closed height:lessthan 55mm., hydraulic pump specifications.no of plungers:1,maximum pressure, pump, can develop:700kg/cm2,discharge/stroke.cc:2.8,weight: <=9kg., pump with teliscopic collapsible handle, hydraulic jack,with pmp threaded,100t,150mm, make: ener pac, portable arc welding machine model tornado -201 power saource with with, 3 meters supply cable + 3 meters welding cable with holder + 3 meters, return cable with earth clamp, make : esab/l&t/ador fontec, digital vibration meter model:ird 811d, gauge,dial;range:0.01 to 20 mm, make: mitutoyo, dial guage stand magnetic on/off switch, make:mitutoyo, vernier caliper (0-150mm) code no.530-335, vernier caliper (0-300mm) code no.530-322, make:mitutoyo, outside micrometer (150-300mm) code no.104-136a, make:mitutoyo, outside micrometer (300-400mm) code no.104-142a, tubular inside micrometer code no.137-208, block,chain pulley;type:triple spur gear manual;capacity:5 t;length:20, m;make:indef;additional information:lift p-series, block,chain pulley;capacity:2 t;maxi lift:20 m, block,chain pulley;type:heavy duty triple spur gear,light weight, body;capacity:1 t;maxi lift:15 m, make: indef/demag/kito/venus, d-shackle 5ton, make: usha martin, shackle;type:d;load rating:1 t, d-shackle 2 ton, make: usha martin, shackle;type:d;load rating:3 t, make: usha martin, d shackles 10 ton lifting capacity, make: usha martin, steel wire rope slings 10 ton capacity x 6mtr long, make: usha martin, belt sling,75 mm width 4 mtrs. length of polyster duplex flat webbing, with plain loops at both ends safety factor 7:1., make: usha martin, circlip;type:plyer;size:195 mm;additional information:ptno 1441-7internal nose, hand operated high pressure grease gun with all accessories(hose,nipples & trolley arrangement)-5kg capacity, allen keys set,1/16'' to 3/8'', feeler gauge, thickness: 0.03 to 0.5mm, no of leaves: 13 (long leaves),series: 184, make:mitutoyo, universal sets adjustable spanner 1171 cp insulation plier 162-8j,s.d.932&859, spanner set,double open end;size:32x36 mm;material:chrome vanadium/carbon steel, taparia make heavy duty pipe wrench ,length-450 mm,least max opening 73mm,product no-hpw 18, make:tapparia/mekastar/stanley/torquestar, taparia make heavy duty pipe wrench ,length-250 mm,least max opening, 48mm,product no-hpw 10, make:tapparia/mekastar/stanley/torquestar, d spanners set, 12nos, 6-32 mm, make: jhalani, bench vice,150 mm, ring spanner 6-32mm, hand pump, for oil barrel, hand greaqse gun, capacity:1kg, spanner,mekaster double ended deep offset ring spanner,chrome vanadium, steel chrome plated,wave profile having a/f size (mm):32x36 confirming, to din 838,iso 3318,10103,10104&691.,part no.mdrm-3236, spanner,mekaster double open ended spanner chrome vanadium, steel,chrome plated,position of open ends 15 degree having a/f size, (mm): 36x41 confirming to din 3110,899,iso 1711,10102,691&3318,part, no.mdom-3641, mekaster double ended deep offset ring spanner, chrome vanadium steel, chrome plated, wave profile having a/f size (mm):41x46 confirming to, din 838, iso 3318, 10103, 10104 & 691.,part no.mdrm-4146, spanner set,double open end;size:41x46 mm;material:chrome, vanadium/carbon steel, 400 amps inverter welding rectifier.model: buddy arc 400i, make esab, l and t, ador, fontec, chain pulley block,5t,10m, make - indef, demag, kito, venus, block,chain pulley;type:p;capacity:2 t;maxi lift:10 m, make - indef, demag, kito, venus, block,chain pulley;type:p;capacity:3 t;maxi lift:10 m, make - indef, demag, kito, venus, self supporting extendable aluminum ladder size; 16feet(closed) to 27, feet (extended), wire rope slings with eye & eye, 25ton x 1 1/4 x 6 mtrs length., make usha martin

Steel Conduit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors