Latest steel enclosure Tenders | Government steel enclosure Tenders

Central Government And Public Sector

CTN :39572570

26 Mar, 2025 7.74 Lacs

Jaipur - Rajasthan

Tender For supply of general servicing of 1.5 or 2.0 tr wac or sac units , sitc of 1.5 tr resiprocating type compressor , sitc of 2 tr resiprocating type compressor , sitc of 1.5 tr rotary type compressor , charging of refrigerant gas for 1.5 tr wac or split ac , charging of refrigerant gas for 2.0 tr wac or split ac , replacement and reparing of thermostate , replacement and reparing of starting capacitor 80 to 100 or 120 mfd , replacement and reparing of running capacitor 36 or 40 mfd , replacement and reparing of relay for wac or split ac , replacement and reparing of wiring kit for wac unit , replacement and reparing of selector switch for wac unit , rewinding of condensor or blower motor for ac unit incuding replacement of bush , replacement and reparing of blower fan motor capacitor 4 or 6 mfd , repairing of pcb for wac or split remote control unit , replacement of faulty or irrepairable pcb for 1.5tr split ac unit , sitc of blower fan motor for 1.5 or 2 tr window or split ac , supplying, installation of condensor or blower fan blade , top up or additional charging of r-22 or 32 gas , supplying and drawing of 3x2.5 sq. mm frls pvc copper single core cable , supplying and drawing of 6x2.5 sq. mm frls pvc copper single core cable , supplying and fixing of 20mm medium class pvc conduit , supplying and fixing of 25mm medium class pvc conduit , supplying and fixing dp sheet steel enclosure with 25 or 32amps 240 volts c curve dp mcb , supplying and fixing of 5 a to 32 a rating, 240 or 415 v, 10 ka, c curve, spn mcb , supplying and fixing of 3x2.5 sq. mm pvc frls round sheathed multi core bright annealed bare copper cable , dismentalling of existing 1.5 or 2.0 tr capacity window or split ac units , transportation of existing 1.5 or 2.0 tr capacity window or split ac units , itc of 1.5 or 2.0 tr capacity split ac units , pdg and fixing of 1 by 4 inch dia copper refrigerant piping , pdg and fixing of 5 by 8 inch dia copper refrigerant piping , providing and fixing 12 mm thick particle board , supplying and fixing suitable size ms stand for split type ac outdoor unit

Central Government And Public Sector

CTN :39605737

29 Mar, 2025 67.86 Lacs

Guwahati - Assam

Tender For supply of rc for 80 no ductable split ac at kamrup ba assam - ductible split ac , itc of sac , pdg. and installing copper pipe , sitc of rigid u pvc piping , supplying and fixing of iron stand , supplying and installing perforated m s cable tray , supply copper armoured power cable , supply copper unarmoured power cable , supplying and fixing spn sheet steel enclosure , providing and fixing gi wire

CTN :39623719

18 Mar, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of copper alloy fancy taps for bathroom as per is 8931 (latest) (q3) , bathroom or toilet mirror (v2) (q4) , european pattern toilet seat vitreous china (q3) , flushing cistern (q3) , copper alloy gate valve for waterworks purpose as per is 778 (q3) , stainless steel shelf rack (q3) , water fittings - copper alloy float valves (horizontal plunger type) as per is: 1703 (q4) , soap dish - case (q4) , towel rail / ring for bathroom (q3) , sinks (q3)

Central Government And Public Sector

CTN :39112820

20 Mar, 2025 NA

Damanjodi - Odisha

Tender For corrigendum : supply of 415v, utilization category ac23a, 630a local isolator cabinet in sheet steel enclosure complete with 630a, 3 pole load break switch. 2. shall be with side operated handle, padlocking facility, prebreak micro switch having 1no+1nc contact. 3. micro switch contacts shall be wired to 4 sq mm tb for external termination. 4. provision of padlock system having sufficient space to lock the isolator at off position by minimum two agencies at a time. 5. complete with both power & control circuit wiring with all insulators, bus bars and control terminal blocks. 6. detachable bottom gland plate for entry of cables from bottom. 7. front door shall be hinged and inter-locked with the isolator in 'on' position. the front door should have a minimum 3 mm thickness perspex/triplex window for observation of position of contacts. 8. isolator should confirm to iec 60364 standard. 9. the dimensional drawing of the local isolator cabinet or product catalogue showing mounting arrangement of the components should be enclosed along with the offer. 10. isolator cabinet should be provided with rain canopy. 11. any isolator parts should not be made of aluminium/aluminium alloy. 12. isolator cabinet shall be metal enclosed suitable for wall fixing using 4 welded fixations, dust and vermin proof and shall be provided with degree of protection as ip-55. 13. provision for three distinct parallel busbar per phase for termination of three nos of 240 sqmm aluminum cables for incoming and two distinct busbar per phase for termination of 120 sqmm copper cable. 14. all hardware used in isolator cabinet shall be corrosion resistant. 15. minimum clearance between the live parts and detachable bottom cable gland plate shall be 400mm. 16. cabinet should be painted with alkaline resistant epoxy paint. 17. isolator cabinet shall have provision for earthing at two separate and distinct points. 18. each isolator cabinet should be supplied with panel keys., push button station specification: 1. pbs made of 2mm sheet steel enclosure with rain canopy, protection: ip-65. 2. 01 no. of green colour start pb with 1no+1nc contacts, 01 no. of red colour stop pb with 1no+1nc contacts, 01 no.of increase pb with 1no+1nc contacts <(>&<)> 01 no.of decrease pb with 1no+1nc contacts. one emergency stop push button with 1no+1nc contacts (push to lock type) shall be provided. size of each push button is of 22.5mm diameter. inscription plate for all push buttons. 3. pb shall be wired with 2.5 sq.mm. copper wire to 40 nos. serially numbered terminal blocks (tb) of elmex make having tb-5-6, 7-8, 11-12, 13-14 <(>&<)> 17-18 shorting link. 4. two nos. of cut out of size 72x72 mm for ammeter and rpm meter shall be provided. 5. 'on','off' <(>&<)> 'trip' indication led lamps in red, green <(>&<)> amber colour respectively with inscription plate to be provided. 6. all push buttons, elements, led lamps <(>&<)> cutout for ammeter <(>&<)> rpm meter shall be on the hinged door of the pb station. 7. pb station shall be weather proof, neoprene rubber gasket suitable for outdoor application. 8. 2nos. of earthing studs to be provided. 9. left side hinged door shall be provided with flexible braided copper earthing. 10. pbs shall have 04 nos. of corrosion free bracket suitable to fix on vertical surface. 11. detachable gland plate to be provided. 12. the push button shall be painted with one coat of red oxide primer <(>&<)> two coats of zinc chromate primer and finally finished with stoving enamel grey paint. 13. the push button station shall be generally in line of enclosed drawing (fig-2). 14. party to submit the drawing along with the offer for technical scrutiny.

State Government

CTN :39614819

12 Mar, 2025 31.14 Lacs

Ramgarh - Jharkhand

Tender For supply of spare parts of deep well hand pump conforming with latest amendment under dws division ramgarh 204-25 - spare parts of india mark ii deep well hand pump conforming to i.s. - 15500 (pt-ii)/2004 to be procured only from approved manufacturers from approved manufacturers from unicef approved qualified supplier & after proper verification of offer sheet inspection certificate marketing and packing etc as per unicefs standard norms, hexagonal bolt m12x1.75x40mm long common to both mk-ii & iii., hexagonal nut m12x1.75. , high tensile bolt m10x1.5x40mm long., nyloc nut m10x1.5mm, handle axle (stainless steel)., ball bearing 6204z., spacer for handle, chain with coupling., nitrile rubber cup washer for mark-ii & ill., nitrile rubber sealing ring mark-ii., nitrile rubber seating big for lower valve mark-ii., nitrile rubber seating small for upper valve mark-ii., hexagonal rod coupling m12x1.75x50mm long, pump head assembly (g.i.), front cover (g.i.), handle assembly (g.i)., water tank assembly for mark-ii (g.i.), connecting rod 3mtrs long with coupling & nut (electrogalvanized)., cylinder assembly complete set for india mark-ii., upper valve assembly complete set for lm-ii, lower valve assembly complete set for im-ii, reducer cap for cylinder mark-ii, plunger rod (s.s.) for mark - ii, upper valve guide (gm)., rubber seat retainer far mark- ii, third plate for head assembly (galvanized), cylinder body with brass liner for im-ii with reducer cap for top & bottom., brass linear, check valve seat for mark - ii, 32 mm g.i. socket, gst @ 5% (add sgst 2.5% + cgst 2.5%)

State Government

CTN :39601440

11 Mar, 2025 35.85 Lacs

Ranchi - Jharkhand

Tender For supply of spare parts for standard deep well hand pump im ii/im iii under d.w.and s. division, ranchi west, ranchi during the year 2024-25. - spare of deep well hand pump for im-ii & im-iii (vlom-65 & vlom-50) conforming to is:15500 (relevant part 1 to 8)/2004 (with latest amendment) only from manufacturers/ suppliers approved from bis/unicef after proper verification of offer sheet, inspection certificate, marking and packing etc, as per bis/unicef s standard norms., hexagonal bolt m12x1.75x40mm long common to im ii & iii, handle axle (stainless steel), ball bearing 6204 z, spacer for handle, chain with coupling, hexagonal rod coupling m12x1.75x50mm long., nitrile rubber cup washer for india mk-ii, pump head assembly (g.i.) with front cover , hexagonal nut & bolt & third plate., front cover (g.i.), handle assembly (g.i.), (a) water tank assembly for mark ii (g.i.), connecting rod 3mtr. long with coupling and nut (electrogalvanized), cylinder assembly complete set for im-ii, upper valve(plunger) assembly complete set for im ii, lower (check) valve assembly complete set for im ii, plunger rod (s.s,) for mark-ii, upper valve guide (g.m.) for mark-ii & mark-iii (vlom-65), third plate for head assemble (galvanized), cylinder body with brass liner for im-ii with reducer cap for top and bottom., gun metal spacer (bucket), 32mm g.i. socket, add 5% gst

CTN :39371139

10 Mar, 2025 NA

Lucknow - Uttar Pradesh

Tender For bid to ras supply of general purpose ball valves (v2) (q4) , steel tubes, tubulars and other steel fittings as per is 1239 (part 2 - steel pipe fittings) (q3) , copper alloy gate valve for waterworks purpose as per is 778 (q3) , sluice valve for water works purposes (50 to 1200 mm size) (v2) as per is 14846 (q3) , water fittings - copper alloy float valves (horizontal plunger type) as per is: 1703 (q4)

CTN :39594800

27 Mar, 2025 NA

Nashik - Maharashtra

Tender For supply of ord spares - firing pin , drain plug , washer copper , steel ball , o ring , screw , spring lock washer , pin plunger sy breech block closing , spring plunger of primer housing lock , plunger , spring for breech ring , flexible hose

Central Government / Public Sector

CTN :39589291

15 Mar, 2025 NA

Multi City - Multi State

Tender For supply of goods, disconnecting and earthing device, 8 pole, 2 way, no off on load 63a, 750 v ac (1000 v-insulation), 2no+2nc with heavy duty handle & pad locking arrangement in earth position, mounted in a stainless steel enclosure, suitable for ac-23 duty confirming to is 13947/iec 947 as per edts-355, rev-01, amendment-1 to schaltbau cat. no. m137.0827407 and l&t cat. no.73342slb321 06b

CTN :39371694

07 Mar, 2025 NA

Amritsar - Punjab

Tender For bid to ras bid to ras supply of water fittings - copper alloy float valves (horizontal plunger type) as per is: 1703 (q4) , copper alloy gate valve for waterworks purpose as per is 778 (q3) , steel tubes, tubulars and other steel fittings as per is 1239 (part 2 - steel pipe fittings) (q3)

Steel Enclosure Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government And Public Sector

Central Government And Public Sector

State Government

State Government

Central Government / Public Sector