Latest steel fastener Tenders | Government steel fastener Tenders

corporations/Associations/Others

CTN :40340413

20 May, 2025 NA

Dadra - Gujarat

Tender For auction sale of alloy steel fastener (ms turning scrap)

State Government

CTN :40303837

03 Jun, 2025 NA

Korba - Chhattisgarh

Tender For supply of scrapper guard bracket of coal mill xrp-1003 at 1x500 mw, htps. korba west.

CTN :40133554

19 May, 2025 10.58 Crore

Karwar - Karnataka

Tender For corrigendum : procurement of main engine spares - clamp, bolt hax soc, valve keeper wedge, diaphragm, hand pump, filter element, split pin 5 x 45 din 94, contam indicator, actuating cylinder, washer, exh pipe bellows, insert paper, first plate, end plate, base complete, guide ring, end plate, ring sealing, first plate, rubber bellows, end plate, first plate, nut, circlip, snap ring 32x1.5 din 471, circlip, snap ring 42x1.75 din 472, circlip for set w6, snap ring 68 x 2,5 din 472, incandescent lamp, o-ring 11.3x2.2 for set w6, plug, screw m10x30, screw m12x50, screw, hex nut, nut, hex nut, nut (m12), stud, countersunk hd screw, adjusting washer, rotary seal, pin spring, pressure monitor 2.2 bar, washer a 16, pressure spring, oil pump, oil filter (element), pressure sensor 15 bar, pressure sensor +/- 70m bar, pressure sensor, drain valve, switch, pressure sensor, cylindrical pin, conical spr washer, seal ring, ring sealing a12x15.5, ring sealing (crank case) a14x18, ring sealing, sealing ring, ring sealing (crank case) a20x24, sealing ring, ring sealing a26x31, sealringa26x34forsetw6, washer a, ring sealing (crank case) a30x36, ring sealing (crank case) a38x44, ring sealing a45x52, ring sealing a52x60, taper facecomp.ring, ring seal, o-ring, sealing ring for set w6, grease nipple am 6x1, nozzle holder, bearing angular contact roller, bolt hex gal cu 5 bk, adjusting washer 42x 52 x 0,1 din 988, cinical spr. washer, conical spr. washer, screw, hex screw, sealant pipe thread loctite 586, clamp, sealing paste gd block, silcone rubber loctite 5970, valve, washer, washer, washer, turbine wheel, ring snap, nut, speed transmitter dm52, cylinder head complete, carbon scrapper ring, sealing ring for set w5, gasket, gasket for set w5, bolt m20 1.50x103.0 lg 18 conrod, bushing con rod 75.00, con.rod brg.upper half, idler gear, bolt adjusting, tube asm cyl head fuel return, adapter, trust member, flap, shaft, bracket turbo speed sensor, pressure valve, sleeve guide oil clr, cover, bolt cylinder head, grommet, sealing ring, adapter 60deg m14x1. 5, cylinder, shaft, flange sealing, bearing bushing, bearing bushing, bearing bushing, shaft, cable for monitor system, coolant pump shaft, impeller, impeller, wiring harness for engine sensor, actuating cylinder, insert (crank case breather), diaphgarm, spacer bushing, gasket, flow restrictor, sealing ring, microswitch, benjo screw, tab washer, grommet 6, grommet, grommet, grommet, sleeve rubber, grommet, grommet, seal oil, union 32 g, o-ring for set w5, o-ring for set w6, o-ring, o-ring, o ring 26 x 2.5 mmn 294, o-ring, o ring, o ring, o-ring, o ring 39.2x3, o ring, o ring, o-ring, o - ring, o-ring 60x4 for set w5, o ring, o-ring, o ring, o ring, o ring, o ring, o ring, o ring, o-ring for set w6, o ring, hose line, hose, hose line, regulator fuel retur n 0.5 bar, valve check 0.2 bar rhdk 18-l 0.2, spacer, exhaust bellow. dn 400, washer a cop, gasket for set w5, gasket for set w5, gasket, paper pack centrifugal spinner filter, screw, nut, compensating washer, washer, washer, repair kit, nut, sealing cone 22mbn 15005, straight connector, adaptor 10 / 6 n 15007, transition socket, union, clamp, vibration damper, cylinder head, exhaust bellows, injector, piston, coolant pump high-temp circuit, washer, impeller for sea water pump, bearing body, gear, rotary seal, level monitor, pressure sensor, cover for solars, actuator vlv, corrosion inhibitor conc. coolant cs100, pressure sensor, track-ball, wiring harness for on-engine sensor, conrod bearing size 0-0(s/sx00040714), gasket, flow restric valve, link (x52408100007), support plate, valve collet, exhaust compressor, hex crew, bearing camshaft std, valve spring outer, hp line, non return valve, valve, clamp, bracket wiring harness, diff-press monitor, screw, snap ring 48x1.75 din 472, spring pin for set w6, swing foll, grooved pin, woodruff key, sealing ring, repair kit, union, gasket for set w6, hex screw, union, tube asm sol oil supply, nut m16 04-2 din43

Central Government/Public Sector

CTN :40291864

19 May, 2025 NA

Thiruvananthapuram - Kerala

Tender For low maintenance stationary lead acid battery sets along with all accessories for installation in the control room at unattended tss consisting o f 55 cells of 2 volt ( 200 ah) conforming to rdso spec. rdso/pe/spec/tl/0040 (rev.2) 2021. description: lead acid (tubular positive and pasted negative plates) stationary batteries 110v 200ah (comprising 55 cells of 2v each) capacity at 10hrs. rate of discharge assembled in ppcp container with intercell conn ectors, inter row connectors, inter tier connectors, stainless steel fasteners, micro porous vent plug, electrolyte level indicators, and porcelain cells insulators i n dry and uncharged condition accessories and electrolyte. with m.s stand. warranty period: 30 month(s) from the date of supply. [ warranty period: 30 m onths after the date of delivery ]

State Government

CTN :40071835

02 Jun, 2025 NA

Birbhum - West Bengal

Tender For corrigendum : providing and installation of electro-mechanical accessories at cwr site and allieds works at ekpara pwss, block-rampurhat-i under bolpur mechanical division - supply and delivery of openwell submersible pumping machinery set suitable for wet pit installation complete with stainer along with all accessories with following specification: pump : discharge (q) : (1800-1280) m3/hr. & head (h) : (19-38) mtrs.method of starting : sd, shaft-stainless steel-ss-304, impeller- crome steel/ci/s.s / bronze, suc & del size- 90/80 mm dia, type of position-horizontal. mechanical sealmotor : 12.5hp (suitable for open well)operating voltage : 415 ( 10 %), phase : 3ph, 50 hz 6%speed : 2800 rpm, method of starting : s/dmake : ksb / grundfos / texmo / cri / kbl / mbh / or any approved vendor. ( n.b : manufacturers test certificate along with charecteristics curve, moc and gurantee certyificate have to be submitted at the time of delivery.), supply & delivery at site of 35 mm x 3.5 core size aluminum armored, xlpe insulated 1.1 k.v. grade cable, conforming to is 7098(i) as per direction of eic.(make:- gloster / polycab / mescab / or any approved vendor list of phed.) ( n.b : manufacturers test certificate have to be submitted at the time of delivery.), supply & delivery of 100a kit-kat rewireable (porcelain fuse carrier & base) (make:- havells / l&t / or any approved vendor list of phed.), supply & delivery of 100 amps re-wireable porcelain fuse unit type tpn main switch with steel sheet enclosure (conforms: is/iec600947-1&3). (make: havells /approved vendor list of phed.), supply & delivery of re-wireable type tpn changeover switch 100 amps 415v, 50hz, 4 pole offload with steel sheet enclosure (conforms: is/iec60947-1&3). (make: havells /approved vendor list of phed.), 100 amps, 4way, wall mounted copper busbar chamber with steel sheet enclosure (conforms:is/iec:60947-3). (make: havells /approved vendor list of phed.), supply and delivery of the following pipes, valves, pipes and gauges etc at site-- (make: approved vendor list of phed.), 100mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 150mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 100mm dia m.s. blank flange 15mm thick perforated as per is1538., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 100mm dia. cast iron double flanged manually operated rising spindle type sluice valve generally conforming to is: 14846, having body, door, dome / bonnet, gland in graded cast iron to is 210 gr. fg 260, four faces of ss aisi 304 and spindle nut of gunmetal to is 318 gr. ltb 2, outside screw rising stainless steel aisi 304 spindle, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges faced and drilled to is:1538 table 4 & 6. valves tested by closed end method only. (moc & tc needed for valve)., 100mm dia. cast iron double flanged single door swing non-return valve generally conforming to is:5312 part i, having body, door, cover in graded cast iron to is 210 gr. fg 260; body & door rings of stainless steel to ss aisi 304 , hinge pin of ss aisi 304, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges drilled to is 1538 table 4 & 6.(moc & tc needed for valve)., 100 mm dia dismantling joint pn-1.0 ci dismantling joint complete galvanised , stud, nut and washer and follower flanges, drilled to is:1538 table 4 & 6. ( at delivery side of pump ), supply & fixing of perforated gi cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. s&f gi connector, 6mm dia ms suspender, bolts & nuts, steel fastener etc. as required of the following size. incl. al painting of ms support. [200x50x1.25mm x 3mtr long

State Government

CTN :36800624

25 Jul, 2024 1.30 Crore

Nagaur - Rajasthan

Tender For matarial supply for nrega scheme and other - p.p.c., white cement, fine prechiger, rail/gravel, gravel local, ballast stone brick for other than road work, 400mm measurement hand broken sit boids cart 1/11), 400mm stone broken boids cart 1/11, amin stone broken boids cart 12/10/6 tikesher, samyo for road work, 63-40mm stone broken boids cart 1/11, 63-40mm hand broken stone road boil cut 1/11, 90-45mm. hand broken stone aggregate, kori ravish boyce cart 1/6), yevla boids cut 1/6), binding samayi 14-6) (dal cut 1/, brick (22.5117.50 cm), first class (stassi, second class, solin khareja chilai stone, masonry bera (, masonry ratha (chi, baranja soling (for digging work upto 15cm height), baranja soling (for road paving work 23cm height), arch width of sheet 10-12 length 2-3 morai 2.5-357, stone sheet (flaky materia(3-4" thick & length, 1-2" width, sandstina dpc, sl, coping lintel, tand almira et, 250mm thickness upto 25-40mm thickness, upto 40-50mm thickness, upto 2300 sq. cm, polished kota stone one side side, upto 1000 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marble stone carving mirror 20mm thick, upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marble chips, marble powder, marble stone (rajasthani 20mm thick), upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, stone grate, single pail 100 x 75 mm, double pail 125 x 75 mm., stone pail, upto 1.5 m length, minimum 40mm thick , 1.5 m to 2.40 m length, minimum 50mm thick , 2.4 m to 3.0 m length, minimum 65mm thick , above 3.0 in length, minimum 75mm thick , precast tiles/rocks , glazed su-30x45 cm , verified size-60x60 cm , interlock tiles/b rick/block for road work , cement interlocking block m-30grade, 80mm thick , fittings with local cash. for doors, windows and furniture), others / teak, factory made doors (30 mm thick, solid and single sheet), structural steel, iron (tor steel fo-415/500 for reinforcement, widing via 18 gauge, iron girders, conia iron square green/leaf angle aman, jage wine and 14 quaestrad/34 jani, barbed iron lar size 12 guage wire and 12 guage strad/12, iron mesh (24 gauge, 14 mesh, module gi box, 2 for soil, 3 for module, module base and cover plate, 2 for module, 3 for module, modular swaying in, 15 marked, sp 5/6 ampere, sp 15/16 ampere, modular circuit outlet, marked, 6 pin 15/16 amp, steel fastener 5 mm 75 mm, scb db, 2+2 way, spn, single door, 2-4 in, spn, single door, 2+6 in, spn, single door, gi pipe (medium thickness., 15.00 mm dia, 40.00 mm dia, copper wire 8 swg (4.00 mm dia) (0.117 kya/m), ci/ms cover plate attached to frame with locking arrangement, pvc water tank body cover (as per 15:12701-1989, diesel road roller 8 to 10 ton, tractor (25-40 hp), tractor trolley, tractor water tanker samta 4000 liter weight, cement ket mixer 5-7 cubic feet, pumping set 15 hp, niddle/plate better mm operator, -grinding machine with operator big, motor i.e.), compressor, hydraulic excavater/cb (bucket capacity 0.4cum), scraper, shuttering ply with beam and other material, shuttering ply with batti and other material, shuttering nohe plate with batti and other material

Steel Fastener Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government/Public Sector

State Government

State Government