Get complete information related to latest Steel Flume Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Steel Flume Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Steel Flume Tenders.
Tender For corrigendum : supply of electrical equipments and installation works of electrical and instrumentation system for oesc at maps site - supply of following pre-fabricated and galvanized cable tray supporting structure materials as per specification, tender drawing (maps-1&2/01652/2053/ga) and reference drawings nos kapp-3&4/ 21490/ 2002, 2003 & 2004/dd., 22 first rod with m22x55 long threading on one end & m 22 hex nut, isa 65x65x6, 22 rod, isa 65x65x8, ismc 75 channels, couplers (36 odx6 thk.), weld attachment (made of 75x10 thk. plate,320 long), swivel washer seat (46 x16 thk.), swivel washer (40 x16 thk.), iso 1234, 3.5x32 spilit pin, shear bolt m10x70 with hex. head & nut & washer, washer for shear bolt, nut for shear bolt, iso 1234, 3.5x20 split pin, washer (48 , is 2016), 3 mm thick l clamp with m8x30 mm long bolt, 2 plain washer, 1 spring washer and nut, 600mm long, 30 mm wide & 2.5 mm hot dip galvanized strip with two nos of m8x30 mm long bolt, 4 plain washer, 2 spring washer and 2 nuts, installation of cable tray supporting structure including site works such as cutting, drilling, threading, welding, fixing the hardware, touch up painting using zinc rich paint for welded surfaces etc., as per the specification, cable installation note, tender drawing (maps-1&2/01652/2053/ga) and reference drawings nos kapp-3&4/ 21490/2002, 2003 & 2004/dd, type- ce, ceiling support for supporting one number of straight run of tray or elbow (1 tier) of 150 mm width, type- ce, ceiling support for supporting one number of straight run of tray or elbow (1 tier) of 300 mm width, type- ct, ceiling support for supporting one number of tee accessory (1 tier) of 150 mm width, type- ct, ceiling support for supporting one number of tee accessory (1 tier) of 300 mm width, type- d2, wall/column support for supporting one number of vertical straight run of tray (1 tier) of 150 mm width, type- d2, wall/column support for supporting one number of vertical straight run of tray (1 tier) of 300 mm width, common cable tray and ventilation duct support for supporting 1 tier of straight tray or elbow of 150 mm width, cabling systemsupply of following sizes of 6.6kv/11kv rated, al conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed, gi wire/ strip armoured power cables along with steel cable drums, 3cx185 sqmm armoured cable, supply of following sizes of 1100v rated, cu/ al conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed power cables along with steel/ wooden cable drums, 3.5cx400 sqmm, al conductor, armoured cable (gi armour) with steel cable drum, 3cx2.5 sqmm, cu conductor, un-armoured cable with wooden cable drum, supply of following sizes of 1100v/ 650v rated, cu conductor, pvc (type-a) insulated, overall screened, frls pvc (st1) inner and outer sheathed, gi armoured control cables along with steel/ wooden cable drums, 4cx2.5 sqmm, 1100v rated with wooden cable drum, 2cx2.5 sqmm, 1100v rated with wooden cable drum, 4cx10 sqmm, 1100v rated with steel cable drum, 2cx10 sqmm, 1100v rated with steel cable drum, 10px1.5 sqmm, 650v rated with steel cable drum, supply of following medium duty gi pipes/ heavy duty erw rigid conduits/hume pipe for routing cables from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, installation of following medium duty gi pipes/ conduits/hume pipes for routing cables (from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge), including supply and installation of clamps/ fasteners/ supports, accessories like bends/ couplers along with cutting, threading etc., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, installation of following sizes and types of cable trays and accessories as detailed in drawings and specification including sup
Tender For open gym material with installation-, supply & fixing equipment for open gym as per following details. item should be fix properly including e/w & c.c. in m-20 as per requirement., , sit up & pull board double: product dimensions: 1760mm (length) x 1140mm (width) x 660mm (height)., , safe workout area: -2500mm (length) x 1600mm (width)., , the sit up board double made from "c" class gl pipe. center column made from 100mm nb "c" class g.i. pipe., , the main frame is of 25mm nb made from "c" class gl pipe. frp sheet of 3mm thickness is molded on main frame., , the remaining frame of the sit up board is of 32mm nb made from "c" class gi pipe., , the powder coating is done with pure polyester powder paints with 60 to 70 micron thickness., , the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb "c"class welded with m.s. round plate of 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness., , supply & fixing equiopment for open gym as per following details. item should be fix properly including e/w & cc. in m-20 as per requirement., , *legg press dimensions:-1840mm (length) x 360mm (width) x 1560mm. (height)., , *safe area-2.8 x 1.4mtr., , *leg press equipment made from "c" class g.l. pipe of different nb. nb stands for norminal bore sizes le., , *internal diameter of pipe in millimeters, , *the center pipe is of 100mm nb made from "c" class g1. pipe., , *the sleeve frame is of 100 dd and of m.s. seamless pipe with thickness 5mm. this sleeve can be disassembled from main frame., , *the bottom support of m.s. round plate of 250 mm & 10mm thick., , the remaining outer frame is of 32nb made from "c" class g.1. pipe., , 2, , the foundation used for fixing is structure and made from center pipe of g.i. of 80mm. nb "c" class welded with m.s., , round plate of 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.5. angle of 3 mm thickness and 20mm x 40mm crc. square pipe of 3mm thickness., , *seat & back rest provided are made up of ms deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm., , *the footrests are made from casted aluminum material, having sizes 130mm x 310mm x 5mm thick. with the support, , of 310mm x 130mm x 3mm thick ms plate., , the frame of footrests made up of 25 nb "c" class g.i. pipe. *, , closing caps are made up of high quality fiber reinforced plastic material. *, , *to build structure bushes are used which are made from m.s. seamless pipe of 50mm c.d. and 5mm thickness., , *the pins used are made up of 25 mm sae 8620 bright material., , *the bearings used are of "6205zz" permanent lubricated sealed bearing of reputed brand., , *high tensile steel with galvanized nut bolts are used for assembly., , *the cerclips used for assembly are of a24 mm, , 3, , providing and fixing of cross trainer of size not less than 1320mm (length) x 600mm (width) 1750mm (height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. the main structure frame shall be made from g.l. pipe minimum of 80nb "c" class welded with m.s. round base plate atleast 250 mm & 10mm thick. the handle frame shall be made up of atleast 25nb "c" class g.i. pipe. the footrests shall be made from aluminum casting material of size not less than 130mm x 310mm x 5mm thickness and mounted on ms. plate of size 130mm x310rnm x 3mm thick. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders paints with 60 to70 micron thickness, complete in all respect includig fixing the m. s holdfast in cement concrete to hold the whole structure., , 1, , 4, , providing and fixing of chest press of size not less than 2000mm (length) 710mm (width) x 2200mm. (height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pul
Tender For supply of fd protn wk med gun - quick setting compound rapidite confirming to is specification. , natural sand , aggregate 40mm , aggregate 20mm , 63mm hard core stone aggregate , tmt bar for fd gun shed pedestal , tmt steel bars 12 mm dia bar including , tmt steel bars 16 mm dia bar including stirrups cutting , ms binding wire , ms frame work for fd gun shed coumn and roof ismbs and ms plate etc all as directed , b ismb g2 beam 300x140 mm 9.50m long , 04 nos steel column section 6.00m long 300x300x6.3 mm over rcc pedestal , 02 nos for each top of pedestal column , 01 nos ms plate 16 mm thick to be welded with ismb on top end of shs column for fixing with 04 nos of , ms plate 8 mm thick to be welded with ismb g1 and g2 in middle on both ends for fixing 20 nos , 4 nos column 8 nos ms nuts and bolts of length 600mm for fundation bolt fully thread suitable for 20 mm dia nuts including two numbers of washers , ms nuts and bolts of length 150mm long fully thread suitable for 12 mm dia nuts including two numbers of washers , steel roofing trough srt of size 1630 x 613 x 180mm made out of 2mm thick hot rolled carbon steel , ms frame work for roof trusses purlin rafter and ms isa 65x65x6mm truss 5.80kg rm plate etc all as directed make tata sail jsw , ismc 75mm 6.32 mtr long rafter 7.14kg rm , ismc 75mm 10.50 mtr long purlin 7.14kg rm , ms flat 40x5 mm thick for wind tie tata sail jsw 1.26kg rm long 10.50mtr , ms plate of size 8mm thick for welding of truss with member , ms angle of size 40x40x6 for cleat , 10 nos ms plate 10 mm thick size 300x300 base sole plate for truss , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers , ms clit for joint of steel structure angle 40x40x6mm 100 mm long welded with steel structure , hdpe laminated sand bags of size 75 x 40cm sand colour and each bag , prepainted galvanised sheet 10 feet x3 feet x 0.50mm , galvanised j hooks with bitumen cup washer including nuts 8mm dia , supply for preparing new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces , pbs roll self finished tarfelt hessian base for water proofing grade 1 conforming to is 1322 1980 of size 20m x 0.90 m , painting brush 4 inch make amar lukky , integral water proofing compound confirm to , silicone gel sealant of 01 pack of 400 gms including applicator gun , 12mm thick plywood bwr of size 8 feet x 4 feet , hesco basket size 0.60x0.60x0.90mtr , wooden flat gurmala , water leveling pipe pvc 100 mtr , hand rivet gun machine , drill bit 25mm dia , drill bit 16mm dia , drill bit 10mm dia , tape measuring metallic 30 m , mason trowel karchi , tasla iron 18 feet , shovel with wooden handle , axe picks with wooden handle , fawda with wooden handle , crobar 5 feet long , rammer with wooden handle of wt 5 10 kg , brick hammer 1 2 kgs , pipe wrench 12 inch , pipe wrench 18 inch , adjustable spanner 12 inch , hacksaw frame with 2 blade , hand gloves canvas with isi mark , aluminium sprit level 6 inch , brick line , plumbob , hack saw blade
Tender For supply of lightening protection system at kolkata terminal ii - 500 mm air terminatination g28ff2 g28 , 700 mm air termination rod. diam 8 mm , clamps to hold air termination rod , roof conductor , conductor holder for parapet wall side w , conductor holder with a slotted saddle c , adhesive metal to metal , metal metal adhsv dispenser , universal connector of material stst , connection clamps for steel metal column , down conductor of diam 8 mm , antenna pipe clamp according to din en 6 , lightning strike counter , uni disconnecting clamps , gi flat 25x6mm strip having width 25mm , gi strip holder of material- gi , copper bonded rod with low carbon steel , 20 kg backfilled compound , stst 316 grade clamp , poly plastic pit cover of material , anti-corrosion tape , lightning current and surge protection dev , lightnng crrnt and surge protectn n pe , modular combined lightning current and s , modular 2-pole type 2 surge protection d , modular surge arretser for 24 volt signa , surge arrester for field devices to prot
Tender For tender for supply of a non distructive test on steel members i dpt test , ii ut ultrasonic thickness gauge , iii sagging defection test total station , iv to check verticality of column , 1 b non distructive test on concrete members visual inspection as per specified in specification of documents , site testing charges concrete 2 upv testas per specified in specification of documents , 3 rebound hammer test schmidt s rebound hammer test for determining the concrete compressive test ref is 13311 part 2 , 4 half cell potential accordance in with astm c876 half cell potential to assess the probability of corrosion of reinforcement sac code 998346 , 5 carbonation in accordance with bs 1881 201 1986 clause 2 22 carbonation test to measure extent of carbonation from the concrete surface sac code 998346 , 6 profomete scan test on rcc members to assesss covers spacing of bars including approximate diameter bar , 7 core test core cutting and compression test for rcc structure in accordance with js 516 on rcc members. 70mm core cutting in reinforcement concrete core filling by specialized epoxy material micro concreate with bond coat , 8 preparing detail report per specified in specification of documents
Tender For assessment of load carrying capacity of the existing column - beam steel structure and design recommendations to enhance its load carrying capacity for installing a higher capacity eot crane in bay 2 of 05 shop, bhel, hyderabad