Latest steel galvanizing Tenders | Government steel galvanizing Tenders

State Government

CTN :41820979

30 Sep, 2025 NA

Nashik - Maharashtra

Tender For work contract for fabrication / repairing / erectionof steel structure and ms grills (as & when required) at tm-ii, ntps,eklahare, nashik

CTN :41735632

26 Sep, 2025 12.84 Lacs

Kaushambi - Uttar Pradesh

Tender For work of steel structure for keeping garbage in mrfp center in ward no. 2 raja suheldev nagar

Central Government/Public Sector

CTN :41721549

27 Sep, 2025 NA

Multi City - Multi State

Tender For construction of 02 nos of deep borehole with jalminar in mohuldih and aaamdih village under csr : : - boring of size 6.5 inch diameter upto minimum 30m depth and further boring of size 5 inch diameter upto 50m depth in rock zone., providing and fixing of 5 inch diameter pvc casing pipe as per is 12818 with minimum wall thickness of 5.2 mm , supply and fitting of 32mm brass ball valve, supply and fitting of 32mm brass non-return valve horizontal, supply and fitting of 32mm m. s clamp to hold pipe, supply and fitting of g. i nipple 32mm, supply and fitting of g. i bend 32 mm, supply and fitting of bore well cover size 5 inch, supply and fitting of p.p.rope rassi of size 10mm dia, pvc tape 02 roll taplon tap 10 roll mseal 20 pkt etc all complete., supply and fitting of size 1 inch dia , supply and fitting of size 3 by 4 inch dia, supply and fitting of size half inch dia, supply and fitting of valve size 1 inch dia, supply and fitting of valve size half inch dia, "providing and laying single layer brick flat soling with over burnt or picked jhama bricks including preparing and leveling the bed and filling the joints with locally available coarse sand.", "making platform with side brick wall for fixing water point one side 900 mm height and other three side 200mm with anti skid vetrified floor tiles size 300 x 300 and ceramic wall tiles 300 x 150 mm upto a height of 900 mm over brick wall all complete as directed by eic", "providing and applying with synthetic enamel paint two or more coats with approved brand and shade ready mixed paint including primer as per direction of eic with the latest monogramme of ucil.", "providing of submersible pump set of 02 hp minimum wp 1500 and minimum 110 m water head auto run & stop with dc pump motor of stainless steel suitable for minimum 125 mm dia borewell discharge rate minimum 2000 lph at minimum 110 mtrs head and making suitable arrangements to operate hand pump manually in the same borewell when there is no solar power including 02 years warranty against defects in materials & workmanship with locking arrangements of switch board all complete as per of eic. ", "providing and fixing of 2.5 sqmm x 3 core flat submersible copper cable as per latest is 694 as directed by eic", "providing fixing and lowering of 32 mm dia upvc sch80 pipe of pressure rating of 12.50 kg per cm2 with all accesssories and fittings complete as per direction of eic", "providing and fixing ptmt push cock or bib cock of approved quality and colour 15 mm nominal bore 98 mm long weighing not less than 75 gms", "supply and installation of hot dip galvanized steel composite stagging structure of height 4.5 m and 1.5 m x 1.5 m size aprox 350 kg for mounting of 2000 l water tank to withstand wind pressure of high wind of 200 km per hr as per direction of engineer incharge.", "providing and fixing of hdpe water tank isi mark 2000 ltr capacity with cover and locking arrangement to be put on the top of the steel stagging.", "installation fittings plumbing charge civil work of jalminar with pump set complete including transportation as per direction of eic.as per direction of engineer incharge"

State Government

CTN :41619694

09 Sep, 2025 NA

Parganas - West Bengal

Tender For supply, installation and trials of laboratory instruments equipment apparatus with training for quality control ii division at siliguri, p.w.(roads) directorate - nomenclature of machine/instrument and work required: supply, of only vacuum pump cum controller required for existing digital 4 station vacuum indicator for absolute viscosity test. the same will have to he installed on the existing machine and after installation, necessary trials are to be carried out. relevant is code: is: 1206: 2022 (part ii). specification: the pump connected with the vacuum system should be capable of maintaining a vacuum within 2 0.05 cm of the desired level up to and including 30 cm of mercury, and should have the capability of holding the desired pressure throughout the period of a particular test. the pump should have both analogue (with divisions of 0.05 cm of hg) and digital pressure gauge (capability of displaying minimum of 0.05 cm of hg). the vacuum pump controller should be supplied with a 4-position manifold to apply vacuum simultaneously up to four positions and perform viscosity determinations. equipped with dedicated on/off switches for each position and supplied with blue silicon tubing. the pump should have the capability of withholding the pressure set for tests and also maintain it throughout the test. vacuum pump should be the part of vacuum system [pump should be inbuilt with in the vacuum system along with analogue and digital display of vacuum). note: 1. calibration certificate will have to be furnished and should be valid for atleast 10 months from the date of supply 2. necessary tests and trials will have to be carried out to the satisfaction of engineers of q.c.-ii division at siliguri. 3. two year comprehensive warranty of total system from the date of satisfactory completion of onsite installation, commissioning and training of the instrument., nomenclature of machine/instrument and work required: supply, installation of u-tube, modified reverse flow viscometer for opaque liquid required for kinematic test of bitumen. details: tube no. 6 & 7 with 01 no. stand each. relevant is code: is 1206 (part 3): 2021 specification: note: 1. calibration certificate will have to be furnished and should be valid for atleast 10 months from the date of supply. 2. necessary tests and trials will have to be carried out to the satisfaction of engineers of qc-ii division at siliguri. 3. two year comprehensive warranty of total system from the date of satisfactory completion of onsite installation, commissioning and training of the instrument., nomenclature of machine/instrument and work required: supply & installation of serological water bath. specification: the bath should have double walled structure, having facility of digital controller cum indicator. the bath should have stirring arrangement. inside wall should be of stainless-steel seamless ss 304 seamless, min. thickness 1.0 mm, with rounded corners for easy cleaning with proper drainage system having ptfe valve and hose pipe (15mm inner dia. min). outer wall to be of ms and properly insulated with cfc-free high-density insulation. minimum temp. range is 5°c to 95°c, 20.2°c. size should be minimum 28 l: -600 w 400d 350 h mm; for 8 standard racks, with adjustable height, compatible with common test tubes (10-50 mm dia.) and other bottles/beakers. note: 1. calibration certificate will have to be furnished and should be valid for atleast 10 months from the date of supply. 2. necessary tests and trials will have to be carried out to the satisfaction, nomenclature of machine/instrument and work required: supply & installation of burette stand with clamp specification: boss head & rod (with stainless steel corrosion resistant rod (length 18") the rod diameter is 1 cm and solid black coated support stand base (6"x4"). should be made of high-quality anti-corrosion & rust-proof stainless steel. the base should be padded to prevent scratches on the surface and better gri

CTN :41694522

10 Sep, 2025 28.67 Lacs

Leh - Jammu And Kashmir

Tender For construction of multipurpose building cum examination and training centre using steel structure system technology at iti leh ut of ladakh. (sh.:- providing services of computer operator, semi-skilled worker for official work and inspection vehicle for official use in the office of leh project division-ii, cpwd, leh.)

CTN :41702965

13 Sep, 2025 2.37 Lacs

Bokaro - Jharkhand

Tender For repairing, overhauling and fabrication / erection of steel structural work cable tray structure, support etc. of 40 bc, vibration both side 01 to 06 no. and bc4a, 42 screen etc. work in electric section at sawang washery.

CTN :41638586

15 Sep, 2025 28.99 Lacs

Hoshangabad - Madhya Pradesh

Tender For supply of 10 mtr air rifle pistol firing range : : - concrete base work for shooting range size 15m x 6m , lighting rear area , air circulation system , target control and scoring station , 304 grade stainless steel jindal j and b structure single continuous shooter table for five lanes , high end electronic target trolley machines set qty 5 , full vinyl finish on shooter table , frame based target end structure independent of walls , malaysian rubber board finish on target end , electrification as per issf or nri standards , premium led recessed or panel lighting of various luminosity as per issf standards , complete wiring and electric fittings with isu approved premium brand , non skid 2mm vinyl carpet in complete range , pcp rifle indian , club level pcp rifle imported , pcp club level pistol indian , pcp club level pistol imported , filling device , compressed air refilling cylinder , boxes of imported pellets , targets , dummy pistol , rifle stand , rifle soft cases

CTN :41655760

22 Sep, 2025 NA

Dibrugarh - Assam

Tender For construction of special heliborne operation platform - ms frame structure work , raft foundation for slithering platform , painting for steel structure , labour and welding staff or climbing wall , technical equipment , climbing wall panel

State Government

CTN :41657029

16 Sep, 2025 11.28 Lacs

Dahod - Gujarat

Tender For item no. 1: excavation in all sort of strata andformation incl. depositing the unuseful excavated stuff as and where directed incl sorting and stacking useful materials as dirested upto 200 mt lead and all lift etc. complete incl. dewatering. item no. 2 prov. & laying in position" nominal mix" cement concrete using cement, sand, & h.b. metal by mass and machine mix for pcc including necessary formworks, compaction, rming, curing as directed with all lead and lift ect complete.for foundation concrete / other generalpurposeconcrete (1:3:6) metal size -63 mm (cement level 220 kg/cum)item no. 3: providing, cutting, bending,binding and fixing in position as per drawing tmt bar, reinforsment for r.c.c. work and anchor bars incl cost of black annealed 16 to 18 bwg m.s. wireetc. complete with all lead and lift. (b) fe-500.item no. 4: prov. & laying in position cementconcrete using cement, sand and crushed metal coase aggregate by mass and machine mix for pcc/rcc including necessary formworks compaction by vibrater, curing as directed with all lead & lift etc complete. (excluding cost of steel) for, body wall, apron, training wall, side wall, splay wall, ket wall, cut of wall etc.4e) "nominal mix" concrete grade 1:2: and msa-40 mm1item no. 5: prov. & laying uncoursed rubblemasonry in cement and sand mortar by mass and machine mixing incl use of header and bond stones etc and incl scaffolding and finishing to required shape and batter end steps etc as per drawing and racking out the joints, curing etc complete in all respect. for lead lift.a) in c.m. 1:5 for foundation and super structure.b) in c.m. 1:3 for super structure.item no. 6: cement plaster 10 mm thick in single coat to cc/rcc work and brick work on fair side in c.m. 1:3 including finishing, curing, scaffolding, etc. complete.item no. 7: providing and fixing marble plate of 2.54 cm thick including engraving and fillinf ead fo letters as directed.(sorp no. 34) item no- s-35.

State Government

CTN :41657030

16 Sep, 2025 5.94 Lacs

Dahod - Gujarat

Tender For item no. 1: excavation in all sort of strata andformation incl. depositing the unuseful excavated stuff as and where directed incl sorting and stacking useful materials as dirested upto 200 mt lead and all lift etc. complete incl. dewatering. item no. 2 prov. & laying in position" nominal mix" cement concrete using cement, sand, & h.b. metal by mass and machine mix for pcc including necessary formworks, compaction, rming, curing as directed with all lead and lift ect complete.for foundation concrete / other generalpurposeconcrete (1:3:6) metal size -63 mm (cement level 220 kg/cum)item no. 3: providing, cutting, bending,binding and fixing in position as per drawing tmt bar, reinforsment for r.c.c. work and anchor bars incl cost of black annealed 16 to 18 bwg m.s. wireetc. complete with all lead and lift. (b) fe-500.item no. 4: prov. & laying in position cementconcrete using cement, sand and crushed metal coase aggregate by mass and machine mix for pcc/rcc including necessary formworks compaction by vibrater, curing as directed with all lead & lift etc complete. (excluding cost of steel) for, body wall, apron, training wall, side wall, splay wall, ket wall, cut of wall etc.4e) "nominal mix" concrete grade 1:2: and msa-40 mm1item no. 5: prov. & laying uncoursed rubblemasonry in cement and sand mortar by mass and machine mixing incl use of header and bond stones etc and incl scaffolding and finishing to required shape and batter end steps etc as per drawing and racking out the joints, curing etc complete in all respect. for lead lift.a) in c.m. 1:5 for foundation and super structure.b) in c.m. 1:3 for super structure.item no. 6: cement plaster 10 mm thick in single coat to cc/rcc work and brick work on fair side in c.m. 1:3 including finishing, curing, scaffolding, etc. complete.item no. 7: providing and fixing marble plate of 2.54 cm thick including engraving and fillinf ead fo letters as directed.(sorp no. 34) item no- s-35.

Steel Galvanizing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

State Government

State Government