Latest steel hangar Tenders | Government steel hangar Tenders

CTN :43776347

10 Feb, 2026 NA

Kargil - Jammu And Kashmir

Tender For supply of refurbishment of sofa to include upholstery coma cushion and spring , fabric for upholstery , foam 1 by 2 inch for cushion size 1 into 2 , foam 2 inch for cushion size 6 into 3 , foam 4 inch for cushion size 3 into 3 , warm light 75 feet , profile light soft covert channel and adapter , artificial glass 86 into 6 point 5 is equal to 559 sqft , steel board toil and hard work of troops of forever in ops division 4 feet into 3 feet , battery box and adapter with wiring

CTN :43755649

19 Feb, 2026 NA

Kanchrapara - West Bengal

Tender For supply of k- thread profile gauge (ring gauge type) for screw. size - 55 x 6.35 mm - k/thread. go & nogo gauge. wear limit - 1 mm ref. drg. no. rdso - sk - 79068 alt-08 & sk - 99002 material - stainless steel & hardened. [ warranty period: 30 months after the date of delivery ]

CTN :43755906

03 Feb, 2026 35.32 Lacs

Dehradun - Uttarakhand

Tender For providing precoated double ribbed trapezoidal galvalume steel profile sheet roofing on national geo-spatial directorate at soi, hathibarkala estate, dehradun. (sh: flooring, drainage and sewer line etc.)subwork/packages:flooring, drainage and sewer line etc.

CTN :43020671

20 Feb, 2026 NA

Delhi - Delhi

Tender For corrigendum : tender for rate contract of orthopedic trauma implants - arthroplasty implants, proximal humerus locking compression plate (philos) 3.5mm, left/right set: 3 to 11 holes on shaft of plate with 9 locking screws 3.5mm (length-all sizes) and 6 cortical screws 3.5mm (length-all sizes), stainless steel., narrow 4.5 mm locking compression plates set: 6 to 14 holes (combihole design) with 4 cortical screws 4.5mm (length- all sizes) and 6 locking screws 4.5mm (length- all sizes), stainless steel., distal humerus anatomical locking plate set 3.5mm left/right (two plates- one medial and one lateral with 6 cortical screws and 8 locking screws, 4 to 8 holes on shaft of plate), stainless steel., extra articular distal humerus locking compression plate 3.5mm left/right set, with 4 to 12 holes on shaft of plate(combihole design), with 4 cortical screw(length- all sizes) and 8 locking screws (length all sizes), stainless steel., interlocking nails for humerus with provision for minimum 3 proximal and 2 distal locking screws (nail diameter 6-8mm, length 22-30mm), proximal radius anatomical locking plate set 2.4mm/2.7 mm, left/right for fixation of radial head and neck, 4 to 6 hole with 4 locking screws and 2 cortical screws, stainless steel., olecranon anatomical locking plate set (hook plate) 3.5mm, left/right, 4 to 8 holes on shaft of plate with 8 locking screws and 4 cortical screws, stainless steel., locking compression plate 3.5mm (combi-hole design) set 5 to 12 hole with 4 cortical screws and 4 locking screws, stainless steel., 1/3rd tubular plate set 3.5mm 4 to 12 hole with 8 cortical screws, stainless steel., 1/3rd tubular locking plate set 3.5mm 4 to 12 hole with 4 cortical and 6 locking screws, stainless steel., distal radius anatomical locking plate set (volar) 2.4mm/3.5mm left/right with 3 to 7 holes on shaft of plate, with 6 locking 2.4mm screws and 2 cortical 3.5mm screws and 4 locking 3.5mm screws, stainless steel., distal radius t locking plate 3.5mm set with 3 to 7 holes on shaft of plate with 6 locking screw and 4 cortical screws, stainless steel., distal radius t non locking plate set 3.5mm set with 3 to 7 hole on shaft of plate with 8 cortical screws, stainless steel., clavicle locking plate set 3.5mm right/left (6-8 holes) with corresponding screws, ss., headless compression screws 2.7mm, self-tapping, cannulated, length 10-40mm,titanium, headless compression screw 3.5mm self-tapping, cannulated, length 10- 50 mm, titanium, headless compression screw 4.5mm self-tapping, cannulated, length 10 60 mm, titanium., 1.5 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *, 2.0 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *, 2.4 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *, radius intramedullary square nail set diameter 2.0mm to 4.0 mm and length 20 to 36mm, stainless steel., ulna intramedullary square nail set, diameter 2.0mm to 4.0 mm and length 20 to 36mm, stainless steel., 3.5mm reconstruction non- locking plate set 4 to 14 hole with 8 cortical screw, stainless steel, 3.5mm reconstruction locking plate set 4 to 12 holes with 4 cortical screw and 6 locking screw, stainless steel., 2.7mm reconstruction non locking plate set, 4 to 14 holes with 8 cortical screws, stainless steel., orthofix external fixator, size- l/m/s/es, ss, dynamic screw measuring 9mm, ilizarov ring fixator set for tibia: one set consisting of 10 half rings (120 mm to 220 mm), plus one 5/8 ring (120mm to 220mm), 10 ring connecting bolts, 12 threaded rods(100 mm to 400mm), eight 1.8mm ilizarov wires(trocar/bayonet tip), six olive wires, 30 slotted bolts (centric/eccentric/schanz screw holding), 120 full nuts, 10 washer, two male and two female posts(one to four holes), four schanz screw 4.5mm/5.0mm, two male hinge and two female hinge. instrumentation to be provided along wit

Central Government/Public Sector

CTN :43745097

27 Feb, 2026 NA

Jhajha - Bihar

Tender For supply of intermediate wheel profile checking gau [ intermediate wheel profile checking gauge with calibration certificate for b.g. wheel-sets, gauges made of hardened stainless steel plate machined on cnc with laser etched permanent marking,

corporations/Associations/Others

CTN :43711148

14 Feb, 2026 18.57 Lacs

Faridabad - Haryana

Tender For tender for supply of water proofing and repair maintenance of alimco pmdk building : : -demolishing mud phaska lime terracing in roof , dismantling old plaster or skirting raking out joints and cleaning the surface , providing and laying integral cement based water proofing treatment , providing and fixing on wall face unplasticised rigid pvc rain water pipes , making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete , 15 mm cement plaster , structural steel work riveted bolted or welded in built up sections trusses , providing and fixing precoated galvanised iron profile sheets , providing and fixing ms grills of required pattern in frames of windows , renewing glass panes with putty and nails , reparing and maintenance of window with fabrication of damaged work , providing and fixing isi marked flush door shutters , providing & fixing decorative high pressure laminated sheet of plain , providing and fixing stainless steel sliding door bolts , providing and fixing stainless steel handle , providing and fixing stainless steel tower bolts , providing and fixing stainless steel door stopper , repair and maintencace of flush door shutter and chowkhat , repair and maintencace of m s channel at entrance , removing dry or enamel paint and the like by scrapping , painting with synthetic enamel paint of approved brand , painting with synthetic of required colour to give an even shade , chequerred precast cement concrete tiles 22 mm thick in footpath , making plinth protection 50mm thick of cement concrete , brick work with common burnt clay fps , providing and laying in position specified grade of reinforced cement concrete , providing and fixing gi chicken wire mesh 24 gauge , taking out doors windows and clerestory window shutters , providing and laying anti skid ceramic glazed floor tiles , dismantling old plaster or skirting raking out joints and cleaning the surface , 12 15 mm thick plaster of 1 4 cement , coarse sand with water proofing compound , removing dry or oil bound distemper , water proofing cement paint , providing and applying white cement based putty of average thickness 1 mm , distempering with 1st quality acrylic distemper , finishing walls with acrylic smooth exterior paint of required shade , removing dry or enamel paint and the like by scrapping , painting with synthetic enamel paint of approved brand , wiring for light point fan point exhaust fan point call bell point , wiring for group controlled looped light point fan point exhaust fan point call bell point , supply and fixing of 1200 mm ceiling fan with fan regulator , supply of pvc body brisk air exhaust fan , supplying and drawing following sizes of frls pvc insulated copper conductor 3x2 5 sq mm , supplying and drawing following sizes of frls pvc insulated copper conductor 3x4 sq mm , supplying and fixing gi box with modular plate 6 pin 5 6 and 15 16 a modular socket , fixing 25a modular socket outlet and 25a modular sp mcb c , supplying and fixing following way horizontal type three pole and neutral , supplying and faing 5 a to 32 rating 240 41 5 v 10ka c curve , supplying and fixing following rating four pole 415 v , supply and installation of 22 watt led batten and other accessories

CTN :43725680

11 Feb, 2026 NA

Saugor - Madhya Pradesh

Tender For supply of cutting , multi meter analog , out side micrometer , plumbing tools , soldering iron exchangeable copper tip , tong tester clamp on multi meter , rawal plug tool , firmer chisel , ring spanner , spanner double ended , ring spanner off set , wrench adjustable , clamps c , cleaning tray , electric soldering iron , file, half round ,second cut , file, square second cut , file, square round , file, triangular , second cut , flat file , second cut , flat file , bastard , grease gun , hammer ball peen , insulated screw driver , hammer mallet , hammer plastic , hand vice , outside micrometer , spanner clyburn , spanner d. e. set of 12 pieces , spanner t. flocks for screwing up and up-screwing inaccessible , spanner, adjustable , spanner, ring set of 12 metric sizes , spanners socket with speed handle, tbar,ratchet and universal , spark plug spanner 14mm x 18mm x size , taps and dies complete sets 5 types , vernier calliper , number punch , s. s tape , h. p. torch , oxygen gas pressure , acetylene gas pressure , co2 gas pressure regulator , argon gas pressure regulator , flash back arrester torch mounted , flash back arrester cylinder mounted , micro meter inside with extensionrods. , vernier caliper , vernier bevelprotractor blade with acuteangleattachment , file knifee dge smooth , file feath eredge smooth , file triangular smooth , file round second cut , file square second cut , feeler gauge , file triangular second cut. , file flat second cut safeedge , file swisstypeneedle , file half round second cut , file half round bastard , file round bastard , file hand second cut , file card , spanner-doubleended , machine vice , wing compass , handhammerwithhandle , torquewrenchstandard ratchettype , powertoolsfor fastening , different profile gauges platetype -for demonstration , knurlingtool diamond straight and diagonal index able boring bar with inserts , temperaturegauge , dowelpin straight , standard tap screws , lapping plate , medium carbon heat treated alloy steel metric studs and bolts along with nuts , capsscrews , drill gauges , stopcock , slip-on forged steel flange , pipe threading die with handle , pulleys for v-belt or flatbelt , v-belt or flat belt steel rule with metric and british graduation, steel rule graduated both in metric and english unit, try square, caliper inside spring type. , caliper hermaphrodite spring type, caliper outside spring type, caliper, odd leg, spring joint, divider spring type, divider spring type, scriber, centre punch, centre punch, centre punch, centre punch, screw driver, chisel cold flat, cold chisel flat and cross cut, hammer ball peen with handle, hammer ball peen with handle. , hammer ball peen with handle. , hammer ball peen with handle. , file flat - second cut, file flat smooth, magneto spanner set, file flat, file half round, hacksaw frame fixed type, safety goggles. , dot punch, measuring steel tape, combination plier insulated, screw driver insulated, electrician screw driver thin stem insulated handle, heavy duty screw driver insulated, electrician screw driver thin stem insulated handle, knife double bladed electrician, knife folded stainless steel, neon tester, hammer, cross peen with handle, file flat rough double cut, file, round, fine double cut, file flat, fine double cut, file square, fine double cut, file triangular fine double cut, pliers long nose, pliers long nose, pliers flat nose, pliers flat nose, line tester, tweezers, allen key set of 12 pieces, electrician screw driver, philips screw driver set of 5 pieces, screw driver blade, screw driver blade, wire cutter and stripper, helmet fiber, hand shield fiber, flat tongs, file half round, file flat, //bid details2 / 115

CTN :43696128

02 Feb, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply of 7 types of steel profiles - special profile no 175 lf no. 0185599001 , high accuracy shaped steel profile no 1028 lf no. 0185599003 , hot pressed shaped steel profile no ep 12535 1944 lf no. 0185599008 , hot pressed shaped steel profile no 2370 lf no. 0185599011 , high accuracy shaped steel profile no 3561 lf no. 0185599012 , hot pressed shaped steel profile no 4267 lf no. 0185599015 , profile no ke 857 lf no. 0185599019

CTN :43681812

11 Feb, 2026 NA

Panchkula - Haryana

Tender For tender for supply of construction items and electrical items c c - stone aggregate 40 mm , stone aggregate 20 mm , stone aggregate 10 mm , cement , exterior primer , white cement based putty , sand , steel bar above 12 mm dia , 40 mm dia ms pipe , flats upto 10 mm in thickness , flats exceeding 10 mm in thickness , mild steel plates , mild steel rivets , galvanised steel bolts & nuts 6mm dia and 25 mm long round head with slots , self threating screw , galvanised steel bolts & nuts 10mm dia and 125 mm long round head with slots , bitumen washer , 20 mm dia nut & bolt 8 inch long , common brunt clay f.p.s. bricks class designation 7.5 , red oxide zinc chromate primer , u-pvc pipes single socketed pipes 110 mm dia , u-pvc pipes rubber ring 110 mm dia 10 feet long , upvc bend 87.5 degree 110 mm bend , hardning compound , acrylic exterior paint , precoated galvanised iron profile sheet 0.50mm tct 14feetx3 feet , precoated galvanised steel plain ridges 0.50 mm tct and 500-600 mm wide , precoated galvanised steel gutter 600 mm overall girth , 1.5 sqmm pvc wire , 2.5sqmm pvc wire , mcb 5a to 32a , pvc gang box 7 inch x 4 inch , pvc gang box 8 inchx6 inch , 6 amp pt switch , 6 amp pt socket , 16 amp pt switch , 16 amp pt socket , 25mm pvc casing caping , 1200 mm ceiling fan , fan regulator , 20watt led tube light 4 feet long

Central Government/Public Sector

CTN :43452254

04 Feb, 2026 10.00 Crore

Multi City - Multi State

Tender For corrigendum : supply of surgical d d -localizing organs on skin surface organs on skin surface after ct scan , bone cement with chlorophyll pigment , spine bone cement , vacuum mixing for bone cement , y connector for csf drainage kit , neurosurgical patties , raney clips flat shape , raney clip gun type applicator , suction irrigation device , suction tube disposable , suction tube key hole , aneurysm cliptray stainless steel , storagetray for clips and clip appliers incl lid stacking system sterilization , storagetray for yaneurysmclips stacking system made out of ppsu , storagetray for clips applier and instruments made out of ppsu for steam sterilization upto , clip remover for standard clip , clip standardtemp , applforcf minititanium clips bayonet rottitanjawdouble act , applforcf minititanium clips bayorigidtitanium jawdouble act , applying forceps for mini clips bayrotjaw angle double action , clip minitemporary slightly curved , applforc f std titanium clips bayonet rigidtitanium jaw up wards angeled , clip minitemporary , clip standardtemporaryangled , clip minitemporary curved angled closing force maxopening , applying forceps for mini clips rigid shaft rotating rigid ring handle , applying forceps for mini clips rigid shaft rotating rot ring handle , applying forceps for mini clips rigid shaft rotatingrot j ring handle , applforceps for standard clips rigid shaft rotatingrigid ring handle , applforceps for standard clips rigid shaftrotatingrigid ring handle , applforceps for standard clips rigid shaft rotrotjaws ring handle , appl forceps for standard clips rigid shaft rotating rot ja ring handle , applying forceps for mini clips forceps handle bayonet rigid jaw , clip standard perm. fen , clip standard permanent angled , clip standard perm template combined orbital floor plate, template orbital floor plate large, orbita floor plates, orbita floor plate right small, orbita floor plate right large, orbita floor plate left small, orbita floor plate left large, standard plates profile, hole straight plate, hole straight plate, hole l plate deg left, hole l plate deg right, t plate holes, hole double y plate, hole orbital plate, hole curved plate, burr hole cover plate, burr hole cover plate, burr hole cover plate, burr hole cover plate, orbital floor plate complex large, orbital floor plate complex large, orbital floor plate complex large, template combined orbital floor plate, dynamic mesh, dynamic mesh, dynamic mesh, dynamic mesh, dynamic mesh, dynamic mesh, dynamic mesh, dynamic mesh, titanium bone screws, titanium bone screws, titanium bone screws, titanium bone screws, titanium bone screws, emergency screws, titanium bone self drilling screws, titanium bone self drilling screws, titanium bone self drilling screws, titanium bone self drilling screws, titanium bone self drilling screws, drill bit, twist drill, twist drill, twist drill, mid face fixation implants, hole plate with bar, hole plate with bar, hole plate with bar, hole plate with bar, hole curved plate, hole curved plate, hole curved plate, tplate holes, yplateholes //bid details2 / 124

Steel Hangar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector