Get complete information related to latest Steel Lamination Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Steel Lamination Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Steel Lamination Tenders.
Tender For supply of stainless steel tubes and double ferrule fittings for lhb design high capaci ty parcel van with fiat bogies to material schedule no. icf/sk-10-2-681, issue status-01, re v-00,cs-01 and as per specification no.icf/md/spec-166, issuestatus-01,rev-04,amd-01 & amd -02 [ warranty period: 30 months after the date of delivery ]
Tender For on risk & cost piped water supply scheme for village- kodwa (bathanpara, nityatola, sarnapara, thanpara, tilapara) block- sankargarh district balrampur(c.g.)construction, testing and commissioning of r.c.c. elevated service reservoir of 40 kl capacities 02 no. & staging 12 mtr& 80 kl capacities 00 no. & staging 12 mtr {steel structure 12 m height & 10 kl (5000l x 2no.) 00 no. and steel structure 09 m height & 10 kl (5000l x 2no.)- 00 no.} pe tank & elevated service reservoirs of rcc staging and hdpe slim tank of capacity 5000 ltr of 00 no. 9 mtr staging (with switch room of size 1.8mx1.8mx3m) and 10000 ltr of 00 no. 12 mtr staging.including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber.providing, laying, jointing, interconnection, testing and commissioning of rising main upvc class 10 kg/sqcm 90 mm dia 00 m & hdpe 75mm dia 100 m & 63 mm dia 0.00 m., distribution upvc class 6kg/sqcm 90mm dia. 00 m., 110 mm dia. 00 m., 140 mm dia. 00 m. 160 mm dia. 00 m.& distribution hdpe class 6kg/sqcm 63 mm dia. 4220 m., 75 mm dia. 2320 m.with suitable joints gi pipe, valve, specials and all fittings including all allied civil works, supplying & installation of energy taging n five star bee rating isi marked required capacity single phase / three phase, 50 hz, 220v,, deep well submersible pump stainless steel body, suitable for 4/6 tube well with contral panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications butexcludingpipe,ss/nylonwireropeandconnection cable including verification of tubewell yield& electric connection from cspdcl, construction of brick masonry switch room, construction of boundary wall around the over head tank, installation of electro chlorinator , construction of chlorinator room of providing functional household tap connection (f.h.t.c. 170 ) in individual households and government instiution etc. complete with trial run of 03 months after that o&m of 06 months under piped water supply scheme under jal jeevan mission for on risk & cost piped water supply scheme for village- kodwa (bathanpara, nityatola, sarnapara, thanpara, tilapara) block- sankargarh district balrampur(c.g.)
Tender For piped water supply scheme for on risk & cost piped water supply scheme for village- lau(baigapara,dhamdhamiyapara,joblapara,parsapara,ghutrapara,mudrapara,mahuwapara) block-rajpur district balrampur(c.g.)construction, testing and commissioning of r.c.c. elevated service reservoir of 45 kl capacities 01 no. & staging 15 mtr& 80 kl capacities 01 no. & staging 12 mtr {steel structure 12 m height & 10 kl (5000l x 2no.) 03 no. and steel structure 09 m height & 10 kl (5000l x 2no.)- 00 no.} pe tank & elevated service reservoirs of rcc staging and hdpe slim tank of capacity 5000 ltr of 00 no. 9 mtr staging (with switch room of size 1.8mx1.8mx3m) and 10000 ltr of 00 no. 12 mtr staging.including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber.providing, laying, jointing, interconnection, testing and commissioning of rising main upvc class 10 kg/sqcm 90 mm dia 00 m & hdpe 75mm dia 2221 m & 63 mm dia 0.00 m., distribution upvc class 6kg/sqcm 90mm dia. 00 m., 110 mm dia. 00 m., 140 mm dia. 00 m. 160 mm dia. 00 m.& distribution hdpe class 6kg/sqcm 63 mm dia. 1327 m., 75 mm dia. 0 m.with suitable joints gi pipe, valve, specials and all fittings including all allied civil works, supplying & installation of energy taging n five star bee rating isi marked required capacity single phase / three phase, 50 hz, 220v,, deep well submersible pump stainless steel body, suitable for 4/6 tube well with contral panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications butexcludingpipe,ss/nylonwireropeandconnection cable including verification of tubewell yield& electric connection from cspdcl, construction of brick masonry switch room, construction of boundary wall around the over head tank, installation of electro chlorinator , construction of chlorinator room of providing functional household tap connection (f.h.t.c. 27 ) in individual households and government instiution etc. complete with trial run of 03 months after that o&m of 06 months under piped water supply scheme under jal jeevan mission for village- lau(baigapara,dhamdhamiyapara,joblapara,parsapara,ghutrapara,mudrapara,mahuwapara) block-rajpur district balrampur(c.g.)
Tender For supply of cast copper alloy screw down bib taps and stop valves for water services as per is 781 (q3) , sinks (q3) , taps or valves of nonferrous metals (q3) , waste pipe (q3) , curtain pipe, sider and mounting bracket (q4) , waste fittings for washbasin and sinks as per is 2963 (q3) , door handles as per is 208 (q4) , tower bolts (non-ferrous metals) v2 as per is 204 (q2) , commercial cpvc pipe fittings (q3) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , steel butt hinges as per is 1341 (q3) , continuous (piano) hinges as per is 3818 (q4) , hasps and staples as per is 363 (q3) , helical door spring mis , helical door spring awc , helical door spring mcte , pvc bend pipe short mis , pvc bend pipe long mis , sliding door bolt size 300 mm mis , sliding door bolt size 300 mm awc , sliding door bolt size 300 mm mcte , sliding door bolt size 200 mm mis , sliding door bolt size 200 mm awc , l bend for cp wall mixer mis
Tender For supply of op track stores - complete supply of mild steel metal double beam crash barrier for op track as per ts , convex mirror 60 cm dia alongwith 75mm dia ms pole up to 3 mtr high with complete fittings as per ts , dwc pipe confirming of is 16205 as per tech sanction , complete plant spares for op track as per tech sanction , misc stores as per tech sanction
Tender For corrigendum : supply of ug hardened bunker - tape insulation half inch 15 mtr with isi mark. , ceiling rose. , stainless steal iwc wash down water closet pan pedestal pattern with fixing bolts and p trap including seat cover as per ts , stainless steel wash hand basin white pedestal type flat back or angle back type size 500 x 400mm including fittings with flexible pipe 450mm long pvc connection. , angle valve 15mm dia brass chromium plated for whb. , bib cock 15mm dia brass chromium plated long body. , pillar cock 15mm dia brass chromium plated long body. , stop cock 15mm dia chromium plated for flushing cystern. , stainless steel grating with hole 75mm dia for waste pipe of whb. , stainless steel grating without hole 75mm dia for toilet. , floor trap 75mm dia. , pvc pipe 110mm dia , pvc p trap 110mm dia , pvc connection 600mm long with brass check nuts and rubber washers. , pvc short connection pipe 110mm dia and 300mm long with socket and necessary fitting. , pvc bend with oval access door 110mm dia. , pvc plain bend 110mm dia , pvc t 110mm dia , pvc socket 110mm dia , pvc socket 75mm , pvc bend 75mm , ppr pipe 32mm outer dia with isi mark. , ppr pipe 20mm outer dia isi mark. , puf insulated frp water tank capacity 1000 ltrs. , ppr gate valve of 32mm outer dia. , ppr elbow 20mm, isi mark. , ppr tank connector inner dia 32mm. , ppr reducer 32x20mm outer dia. , ppr tee reducer 32 x 20mm. , ppr elbow 32mm, isi mark. , ppr socket 32mm, isi mark. , ppr union 32mm dia, isi mark. , ppr tee 32mm dia, isi mark. , ppr tee 20mm, isi mark. , ppr socket 20mm, isi mark. , ppr union inner dia 20mm. , ppr wall clamp dia 25mm. , ppr wall clamp dia 15mm. , ppr brass elbow 20mm . , ppr brass socket 20mm . , ppr brass fta 20mm . , ppr brass mta 20mm . , ss nipple 15mm x 25 mm long . , pp-r tee brass 20mm . , septic tank for toilet , taflon tape , rifle rack for 10 rifles , oxygen cylinder kit with trolley 10.2 ltr , fire extinguisher 6 kg , cut off machine 14 inch chop saw metal cutter heavy duty gco 220 , esab arc 200i igbt single phase portable 200a mm a inverter welding machine with complete fittings , durmut 5 kg with 5 feet wooden handle , hand gloves rubber best quality , pan motor tasala 18 inch dia made of steel , phawrah with handle midium size , measuring tape 3 mtr rectractable grade a 1 16 , wiremess for seiving sand 1 mtr width 15mtr roll , axes picks 3kg head with handle , crow bar hexagonal 1200mm long x 40mm dia , gumboot various size , spirit level 10 inch long , nylon mason thread 100m long , plumbob steel with lasing , water level pipe for mason work transparent , hammer 10 kg with handle , tmt bar bending frame , tmt rod bending handle , wooden gurmala , aluminium study , steel gurmala , hdpe tirpal of size 30 feet x 30 feet , steel bucket 15 ltr , iron cutter blade 14 inch , iron cutter blade 4 inch , hexa blade double side , ventilators , connected stores as per final design
Tender For corrigendum : supply of matrials to constraction katageri nrlm shed - broken stone aggregate 40 mm size (kat01), broken stone aggregate 20 mm size (kat01), broken stone aggregate 12 mm to 10 mm size(kat01), coarse sand (zone iii) (kat01), portland cement (kat01), mixer (concrete) - 1 cum capacity (kat01), add watering charges at 1 percentage on material (kat01), add sundries charges at 1 percentage on material (kat01), transportation/loading and unloading of material/lifting of material /wastage/unforeseen charges/miscellaneous which are necessary during execution. (kat01), granite/trap broken metal 100 mm and down size (kat01), plasticizer / super plasticizer (kat01), hom of vibrator 0.71 days (kat01), tmt bars fe 500 (kat01), binding wire (kat01), size stone 20 x 20 x 25 cms (kat01), bond stone 20 x 20 x 45 cm (kat01), boulders (kat01), mixer (concrete small used in culvert) (kat01), mason class i (with tools) (kat01), mason class ii (with tools) (kat01), stone chistler class ii (kat01), add sundries charges at 1 percentage on labour (kat01), add watering charges at 1 percentage on labour (kat01), silver oak or equivalent planks 38 mm thick (kat01), casurina poles 100 - 150 mm (kat01), add handling , loading and unloading at 2 percentage on material (kat01), add sundries charges at 2 percentage on material (kat01), casurina poles 75 - 100 mm dia (kat01), jungle wood runners and planks (kat01), solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm (kat01), add handling , loading and unloading at 1 percentage on material (kat01), solid concrete blocks (40x10x20 cms)-4.00 n/sqmm (kat01), add providing and removing scaffolding at 3 percentage on labour (kat01), vitrified tiles 600x600 mm (kat01), mathi/nandi wood planks for panels 25 mm thick (kat01), add cutting and other wastage 5 percentage (kat01), hom of machinaries for planing (kat01), mathi/nandi wood scantling (kat01), unit cost as per the specification (kat01), m.s rods (kat01), ms flat (kat01), fitter class i (kat01), welder grade i (kat01), add hom of welding and grinding machine at 4 percentage on material (kat01), ready mix primer paint (ready mix red lead paint) (kat01), add wire brush, fine steel wool, putty, sand paper, at 3 percentage on cost of paint (kat01), painter class i (kat01), enamel metal paint (kat01), add brush at 1 percentage on cost of paint (kat01), ceramic tiles 30 x 30 cms (kat01), white cement (kat01), plastic emulsion paint (kat01), add brush, putty, sand paper, roller at 5 percentage on cost of paint (kat01), water proofing cement paint (kat01), add brush, putty, sand paper at 2percentage on cost of paint (kat01), liquid wood filler (kat01), add brush, putty, sand paper at 5 percentage on cost of paint (kat01), enamel paint (kat01), polyenthylene water storage tank of specified capacity l (kat01), labour charges for lifting and placing in position and making connection at 7 percentage on material (kat01), handling loading and unloading 3 percentage on material (kat01), indian type water closet of size 580 mm of specified make with footrests (kat01), a 100mm s or p trap (kat01), add white lead paint, gasket, cement, sand for making good the wall and floor at 2 percentage on material (kat01), add cement sand and grit 1 percentage on material (kat01), licenced plumber with tools (kat01), add 5 percentage for fittings and wastage charges (kat01), polythylene pipes high density 25mm external dia (kat01), cost of 6.5mm m.s. coil (kat01), fabrication charges. (kat01), labour charges for handing errection of rcc rings etc. at 5 percentage (kat01), transportation charges of materials beyond 5 km at 10 percentage (kat01), rcc cap 1000 mm dia, 100 mm thick (kat01), pvc pipe of 10kg/cum,90 mm (kat01)