Latest steel mould Tenders | Government steel mould Tenders

Central Government/Public Sector

CTN :45063336

18 May, 2026 NA

Burnpur - West Bengal

Tender For supply of casting powder for continuous submerged steel casting of bloom section

CTN :45063208

23 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of revolving chair (v5) , steel almirah / cabinets (v4) , sofa (v3) , executive table (v4) , waiting area / airport terminal / public place / reception area chair or seat (v2) , bench/resting stool steel , workbench for section , single locker , side rack with trays , cupboard for officers , display board

CTN :45013097

19 May, 2026 NA

Jamalpur - Bihar

Tender For supply of set of stainless steel moulding for non-ac coaches to drg.no. crw/sk/662, alt-6, consisting of item-1=15 nos., item-2=120 nos., item-3=110 nos.[total qty.=245 nos in a set ]

Central Government/Public Sector

CTN :45013606

13 May, 2026 NA

Kapurthala - Punjab

Tender For supply of energy efficient submersible pumpset 60 hp with stainless steel impeller , 5stage 200 mm borewell, three phase 415 volts, 6 inch delivery having rated head of 80 metres and discharge of 2500 lpm with 40 metres long pvc insulated 3core 25mm sq.mm,isi marked flat cable , of reputed make. specification no.rcf/el/ts/75hp/sub.pump set/01 attached in document section at sr.l no. 1 for technical consideration of item . [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45054925

12 May, 2026 NA

Multi City - Telangana

Tender For auction sale of others - description of lot: 74569-26-04-002-hyb-mjf- lodges of lc gates: auction sale of scrap condemned, unserviceable, and abandoned predominant masonry structure i.e. abandoned lodges of lc gates and service building (alwal booking office) available under the custody of sse/works/mjf located in between mjf- bku section. released materials quantities approximately- (1)released wood=0.75 mt (2) ms =16.039 mt (3) tar steel=5.409 mt (4) rails=2.23 mt, (5) alluminium=0.048 mt total units: 12 (11 lodges and 1 service building) are offered for sale and for dismantling and demolition. available under the jurisdiction/custody of sse/works/mjf. please check the lot image for the details of anticipated release materials from this lot. ds-8 no: 074569-26-00005 dt: 14.04.2026. delivery by lot basis only. state: telangana. pl no. 98417538 hsn code: 73082019. refer to depot conditions for gstin of state railways, list of holidays, and other conditions.

CTN :44925504

04 May, 2026 NA

Parganas - West Bengal

Tender For bid to ras supply of steel bar carbon hr flat 25 x 5 mm mat part no nk , steel mild sheet hr 2500 x 1250 x 3point15 mm m part no g2 by 9515 000710 , brass rod free cutting r bar dia 12point5mm part no nk , brass rod free cutting flat 32 x 16 mm part no nk , copper sheet 400 x 300 x point 5 mm part no nk , m s hollow rectangular section 80x40x3mm part no nk , m s hollow rectangular section 50x30x3mm part no nk , paint olive green to is 29392003 14 part no nk , steel bar carbon h r flat 40x10 mm to i part no nk , steel 40c8 r bar dia 36 mm to is 1570 part no nk , paint olive green to is 29392003 part no nk , free cutting steel 14c 14s 14 rbar dia part no nk , alluminium alloy r bar dia 36 mm desig 2 part no nk , alluminium alloy r bar dia 28 mm desig 2 part no nk , spring as per drawing raw mtrl spring part no nk , leaded brass flat 32 x 16 mm material t part no nk , steel mild sheet h r 400 x 400 x 3point15 mm to part no nk , steel bar carbon h r r bar dia 12 mm to part no nk , steel bar carbon h r round dia 25 mm to part no nk , steel bar carbon h r flat 45x6 mm to is part no nk , steel bar carbon h r flat 40x25 mm to i part no nk ) /bid number : gem/2026/b/7449482 * /dated: 17-04-2026 & & / bid document 1 / 20

CTN :45047373

11 May, 2026 NA

Gurdaspur - Punjab

Tender For supply of bore , pvc connection with ptmt bolt and nut 15mm dia 450 mm length , waste cupling of cp coated half s steel sink 100 mm , stainless steel grating plate 125mm dia with or without hole , pvc internal kit for 10 ltr pvc flushing cistern , vitreous china wash basin 550 into 400 mm including brackets , gi union 15mm , aluminium door stopper alloy body , lock mortice 65 mm for doors , pvc stop cock 20 mm , pvc water tank cover for 1000 ltr tank , gi union 20mm , brass spindle half round for cp bib cock 15 mm , cp brass phase head for bib cock pillar cock concealed stopcock , gi tee 20 mm , jet spray cp with 1 point 2 mtr flexy tube , gi socket 20mm , brass spindle for cp pillar cock 15mm bore , pvc stop cock 15 mm ext threading , aluminium alloy anodised 125 mm long makeclassicargent , gi tee 15 mm , cp telephonic shower with 1 point 2 m tube with hose and hook , gi reducer elbow 20 mm into 15mm , gi socket 15mm , mild steel sliding bolts 300 mm long plate type , pvc water tank cover for 500 ltr , gi elbow 20 mm , cp concealed stop cock 15 mm , gi elbow 15 mm , mild steel barrel tower bolt 150 mm long , mild steel helical door springs including roller and roller plate , oil putty , gi reducer socket 20mm into 15 mm , aluminium anodised section 150 mm long , brass spindle half round for cp concealed stop cock , mild steel pressed stove enamelled black 150 mm , mild steel sliding bolts 250 mm long plate type , gi nipple 20mm into 125 mm , galvanised wire cloth mesh 0 point 56 mm nominal dia of wire , gi nipple 20mm into 150 mm , gi tank nipple 20 mm , gi nipple 15mm into 150 mm , gi nipple 15mm into 100 mm , plywood commercial 8 fett into 4 fett 12 mm thick grade bwr , gi nipple 15mm into 125 mm , gi nipple 15mm into 50mm , gi tank nipple 15 mm , towel ring brass chromium plated , gi nipple 15mm into 75mm , washer for syphone sets internal external dia of washer , aluminium alloy anodised sliding door bolt with hasp staple 250 mm long , plywood commercial 8 feet into 4 feet into 9 feet mm thick grade bwr , mild steel barrel tower bolt 200 mm long , teflon tape roll plumbing , pvc urinal pipe 40 mm dia 750 mm long flexible pipe , gi pipe 20 mm dia medium grade , plywood commercial 8 fett into 4 feet into 6 mm thick grade bwr , brass spindle for concealed stop cock , butt hinges, medium weight cold rolled mild steel 100 mm long , pvc bend pipe for superflow of flushing cistern , hex nipple 15 mm , gi plug 15mm , plywood commercial 8 feet into 4 feet into 4 feet mm thick grade bwr , mild steel mortice lock vertical type 2 levers 75 mm long with two set , vitrous china water closet seat ewc white , gi pipe 15 mm dia medium grade , aluminium alloy handles fabricated type, anodised 150 mm long , door seal with nylon brush side to of door shutter , thread roll good quality , tower bolt 125 mm long , mild steel powder coated hat and coat hook 6 nos of hook , statinless steel holder for curtain rod 25mm dia , mild steel wood screws size 19 iinto 10pack of 100 nos , mild steel full length threaded screws for iron window size n exc 15mm , mild steel cp coated hasp and staple 75 mm long , m-seal liquid , aluminium anodised, barrel tower section 200 mm long , pvc plugs for fixing screws to drill holes pack of 100 nos , sheet glass pin headed 4 mm thick. 4 feet into 4 feet , plywood commercial 8 feet into 4 feet into 19 mm , white cement shower rose 125mm joints brass chromium plated , stainless steel plate rack of size 900mm into 600mm thickness 1 mm , bib tap chromium plated 15mm dia isi marked, fancy type, angle valve cp brass 15mm bore, pvc cabinet looking mirror of size 600 into 450 mm , stop cock //bid details 2 / 82

Central Government / Public Sector

CTN :45050671

22 May, 2026 NA

Secunderabad - Telangana

Tender For sc-kzj section: proposed replacement of steel girders with psc slabs for br. no. 366 dn exg. 10x12.20m gb at km. 263/22-30 in sc-kzj section.

Central Government / Public Sector

CTN :45054891

13 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of others - released, condemned and unserviceable non ferrous- brass scrap of sse-rrd-ohe-scmn containing released & un-serviceable contact wire, dropper clips, contact wire swivel clips steel wire ending clamps p.g clamps 1041-2 & 1031-2, catenary splices brass connectors, contact wire splices, terminal connectors, catenery suspensions clamps, section insulator grips (trailing/falling). total auctioned qty is 635.993 kgs . gst-18 percent and hsn code - 740400. sale and delivery by weight. bidders are requested to inspect the lot themselves prior to bidding.

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

Steel Mould Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector

corporations/Associations/Others