Latest steel pellet Tenders | Government steel pellet Tenders

Central Government/Public Sector

CTN :41033475

22 Jul, 2025 NA

Perambalur - Tamil Nadu

Tender For supply of socket for 20 mm nominal bore pipe, socket for 32mm nb flange, 20mm special socket & stainless steel pipe 20 mm nominal.

CTN :40740301

14 Jul, 2025 10.76 Lacs

Lucknow - Uttar Pradesh

Tender For bid to ras supply of almn door stopper double type , almn door stopper single type , but hinges stainless steel 100mm ss 304 grade , cp bottle trap for whb , cp jet spray for wc 1.5 mtr , door handle almn 100 mm , door handle almn 150 mm , grating pvc 150mm , looking mirror 600x450x5mm almn frame , peg set ss set of 6 pegs 350mm long , sliding bolt almn 250x16mm , sliding bolt almn 300x16mm , sliding bolt ms 250x16mm , stainless steel kitchen sink 45 x 20 x8 inch with drainage board , stainless steel plate rack size 600x900 mm , tower bolt almn 100mm , tower bolt almn 150mm , tower bolt almn 200mm , waste pipe flexible pvc for kitchen sink 32 mm , waste coupling cp for whb 50x32mm , external thraded short body pvc bib tap 15 mm with flange , ss 304 grade wire mess 1.2 x 10 mtr long with aperture 1.14 , flushing cistern kit , but hinges stainless steel 100mm , waste pipe flexible pvc for kitchen sink , tower bolt almn 250mm , cp brass toilet paper holder , whb 550x450x440mm , wc orisa pattern with foot rest 580mm , ss 304 grade wire mess 1.2 x 10 mtr long with apertur 1.14

CTN :41043765

26 Jul, 2025 NA

Muzaffarnagar - Uttar Pradesh

Tender For supply of steel pin lock setting for main and ramp girder of kruppman bridge as per sample , carrying handle for float of kruppman bridge as per sample , wooden planks for flexible duck board jamoya size 150x38x900mm as per sample , wooden planks for flexible duck board jamoya size 125x38x900mm as per sample , buggle strap for ramp and main girder of kruppman bridge as per sample , push lever for anchor winch of kruppman bridge as per sample , flange for float of krupman bridge as per sample

CTN :41011385

30 Jul, 2025 NA

East Khasi Hills - Meghalaya

Tender For supply of cp bib tap 15 mm , app based polymer membrance 1 mm thick , cp soap dish , pvc low level flushing cistern10 ltr capacity dual flush , cp pillar tap15 mm , cp stop cock 15mm , cp health faucet with hook and 1 point 5m long tube , cp angle stop cock 15mm , cp centre hole wash basin mixture hot and cold 15mm , mirror looking l 600 mm and w 450mm with frame , cp bip tap 15mm 2 way double hand with flange , pvc seat cover white for anglo indian type wc , cp towel ring , gun metal gate valve brass 20mm , pvc float valve with rod and ball 20mm , cp bib cock long body 15mm , stainless steel kitchen plate rack size l30 inch w 30 inch and dia10 inch , stainless steel kitchen plate rack size l 30 inch w 24 inch and dia 10 inch , pvc connection pipe 15 mm dia 600 mm long with two nos coupling , stainless steel kitchen sink with single bowl l 24 and w 18 , gun metal gate valve brass 15 mm dia , pvc connection pipe 15mm dia 450mm long , pvc angle stop cock 15mm dia , pvc bip cock 15mm short body , synthetic enamel paint black colour , aluminium floor door stopper double , primer red oxide , paint og green , bend pipe pvc 32mm dia for low level flushing cistern , synthetic enemelled paint grey , sharpi flood light 280 watt , led water proofed focus dj light 200 watt , enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3)

Central Government/Public Sector

CTN :40743544

16 Jul, 2025 71.34 Lacs

Bathinda - Punjab

Tender For corrigendum : annual rate contract of instrument maintenance jobs for the year 2025-26 - removing of level gauges, fixing of level gauges, transportation of level gauges, removing of level switches, fixing of level switches, removing of leveltrols, fixing of leveltrols, transportation of leveltrols, removal of differential pressure/ pressure transmitter with or without capillary with flange size upto 80mm and upto 600# rating, diaphragm seal type transmitter, ordinary transmitter, fixing of differential pressure/ pressure transmitter with or without capillary, diaphragm seal type transmitter, ordinary transmitter, fixing of differential pressure/ pressure transmitter with or without capillary, diaphragm seal type transmitter, ordinary transmitter, removal of diaphragm seal type pressure/d.p gauges with flange size upto 80mm and upto 600# rating, fixing of diaphragm seal type pressure gauges with flange size upto 80mm and upto 600# rating, transportation of diaphragm seal type pressure gauges / ordinary pressure gauges, removal of pressure switch, installaltion of pressure switch, removal of glass tube type rotameter, removal of magnetic type rotameter, fixing of glass tube type rotameter, fixing of magnetic type rotameter, transportation of rotameters (any type), removal of different type of flow meters, upto and including 4" size irrespective of pr. rating, above 4" size irrespective of pr. rating, fixing of different type of flow meters, upto and including 4" size irrespective of pr. rating, above 4" size irrespective of pr. rating, transportation of different types of flowmeters irrespective of size & pr rating, removal of orifice plate from flange assembly, upto & including 6" line size (of any rating) ., more than 6" line size (of any rating), fixing of orifice plate at flange assemply, upto & including 6" line size (of any rating) ., more than 6" line size (of any rating), removal of power cylinders, size upto 4" dia, size > 4" dia, mounting of power cylinders., size upto 4" dia, size > 4" dia, transportation of power cylinders, shifting of empty or filled calibration gas cylinders, removal of thermowells alongwith thermocouple, removal of thermocouple without thermowells, fixing of thermowells alongwith thermocouple, fixing of thermocouple without thermowell, removal of weep hole probes of urea reactor, fixing of weep hole probes of urea reactor, laying of tubing., size 6/8mm of copper or ss tube, size 10/12mm of copper or ss tube, removal of tubing, size 6/8mm of copper or ss tube, size 10/12mm of copper or ss tube, laying of gi pipe., upto size 1/2", > 1/2" , upto size 1", > 1" , upto size 2", > 2" , upto size 4", fabriction & laying of impulse lines/air header etc. of following sizes of pipes (non ibr) including welding upto sch 40, upto & including 1/2" carbon steel, upto & including 1/2" stainless steel/alloy steel, > 1/2" upto & including size 1" carbon steel, > 1/2" upto & including size 1" stainless steel/alloy steel, > 1" upto & including size 2" carbon steel, > 1" upto & including size 2" stainless steel/alloy steel, > 2" upto and including size 4" stainless steel/alloy steel, fabriction & laying of impulse lines/air header etc. of following sizes of pipes (non ibr) including welding more than sch 40, upto & including 1/2" carbon steel, upto & including 1/2" stainless steel/alloy steel, > 1/2" upto & including size 1" carbon steel, > 1/2" upto & including size 1" stainless steel/alloy steel, > 1" upto & including size 2" carbon steel, > 1" upto & including size 2" stainless steel/alloy steel, fabriction & laying of impulse lines/air header etc. of upto & including 1/2" carbon steel of pipes (ibr) more than sch 40, removal of impulse line/air header of ibr/non-ibr (for all ratings), size upto & including 1/2" of carbon steel/gi, size > 1/2" upto & including 1" of carbon steel/gi, size > 1" upto & including 2" of carbon steel

State Government

CTN :40626291

18 Jul, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco - nshes - supply of various sizes of double end flange cast steel gate valves (class-150), make: akson/leader/ s and m industrial valves/ ctaab/ cresent at nshes, nagarjunasagar.

Central Government And Public Sector

CTN :40977994

28 Jul, 2025 NA

Chamba - Himachal Pradesh

Tender For supply of ms plate size 16mm , ms plate size 18mm , ms plate size 20mm , ms plate size 28mm , 90 degree ms angle size 25mm , 45 degree ms angle size 25mm , ms hex bolt with nut 12x1.75x40 mm , hex screw m24x3x100 lg, material ss410 , hex screw m24x3x50, material ss410 , hex screw m24x3x125 lg, material ss410 , ss hex bolt with nut 3by8mmx16gx1 inch , ms hex bolt with nut 32x3.5x350 , ss hex bolt with nut 20x2.5x100 , ms hex bolt with nut 12x1.75x35 , ms hex bolt with nut 18x2.5x120 , ss ball valve 1 inch class 150 female thread , ss 90 degree elbow 1 inch , ss 45 degree elbow 1 inch , ss ball valve 1.25 inch class 150 female thread , ss 90 degree elbow 1.25 inch , ss 45 degree elbow 1.25 inch , 1by2 inch ball valve steel , 1by2 inch 90 degree elbow steel , 1by2 inch 45 degree elbow steel , d spanner 18x19 , ring spanner 18x19 , slide wrench 8 , slide wrench 12 , pipe wrench 8 , pipe wrench 12 , 1by2 to 1by4 inch female adapter npt , 1by4 to 1.25 inch ss adapter with 60 degree cone both side , 1by4 to 1by2 inch male adapter npt , 3by4 to 1by2 inch male adapter npt , 3by8 inch female to 1by2 inch male adapter npt , nrv 6 inch check valve , nrv 4 inch check valve , ms union 1by2 inch , ms rod hexagonal 25mm , ms rod hexagonall 40mm, 1.5 inch , 20 inch flange class 300 , brass rod 2 inch , brass rod 1.5 inch , brass rod 2.5 inch , foot valve 3 inch , pvc suction hose pipe 3 inch dia , pvc suction hose pipe 6 inch dia , clamp 4 inch , clamp 6 inch , 1by2 inch x 14 tpi bsp hss round die , o-ring 3mm , o-ring 4mm , o-ring 5.3mm , o-ring 5.7mm , o-ring 6mm , o-ring 8mm , o- ring 8.5mm , o-ring 9mm , rubber gasket sheet size 2mm , rubber gasket sheet size 3 mm , rubber gasket 2.5mm exact , steel putty 3473 , thread locker 263 , si 5900 flange sealant , sealant 495 , super metal composite 1111 , maintain 100 , m seal 75gm , hydraulic sealant 545, 50ml pack , pipe repair kit , sf 790 gasket remover 510 gm , weldon shank 3by4 inch drill bit set 6,8,10,12,16,20 mm , compressor belt size c90 1 34 , filteration plant belt a800, a30 poly f plus , new hp compressor belt 30440903 - 1000015342 , 50 hp blower belt - b3500 b136 , shaper machine belt b56 , auto darkening welding helmet , test hose stauff minimess hose g-1by4 dn4 , elc 50c cover , cutting wheel 4 inch , flap disc 4 inch , buffer wheel ag-4 , abrassive belt with cloth backing, grain- al oxide , cut resistant hand gloves, cut level 4 , die penetration test kit consisting of cleaner, penetrant and developer , filler gauge .02 to 1.00mm, 600mm length , foam-spung for oil soaking 2 inch thick, size- 4 ft x 6ft , plastic can 2 ltr , box spanner 65mm, phosphate finish , bucket 20l , digital vernier caliper , carbide drill bit set 1 to 13mm , tungsten carbide tipped tool for machining , scotch self bonding tape 3.8x9.15x0.075 cubic cm , t30 compressor oil of 5 ltr pack , gland 10mm , taflon tape , ht insulation tape 25mm wide 25m long roll , measuring tape 3 mtr , ss scale of 6inch length , hose wp 700 bar e6 series with coupling set of c604 , marker parmanent type , welding electrode 7018 - 3.15mm , welding electrode 7018 - 4 mm , welding electrode 7018 - 2.50mm , welding electrode 6013 - 3.15mm , welding electrode 6013 - 2.50mm , welding electrode e-308 - 3.15 mm , welding electrode cast iron - 119e size 2.50mm , star coupling rubber buna-n , gasket 2mm non asbestos , caf gasket 3mm thick- non asbestos //bid details 2 / 76

Central Government/Public Sector

CTN :40031515

17 Jul, 2025 NA

Ernakulam - Kerala

Tender For corrigendum : supply of sae flanges for thruster for csov - 2inch sae j 518 50 bar carbon steel flange groove face with ss retaining ring and cs welding hub to suite 40od tube for by 151 , 2inch sae j 518 50 bar carbon steel flange flat face with ss retaining ring and cs welding hub to suite 40od tube for by 151 , 2inch sae j 518 50 bar carbon steel blank flange groove face for by 151 , 2inch sae j 518 50 bar carbon steel flange groove face with ss retaining ring and cs welding hub to suite 40od tube for by 152 , 2inch sae j 518 50 bar carbon steel flange flat face with ss retaining ring and cs welding hub to suite 40od tube for by 152 , 2inch sae j 518 50 bar carbon steel blank flange groove face for by 152

CTN :40977824

17 Jul, 2025 NA

Balotara - Rajasthan

Tender For supply of gate valves - 3 by 4 inch gate valve sw 800 3000 api 602 iso 15761 body astm a 105 trim stellied stem 13 percentage cr steel b16.11 sheet no 51001 as per soqr item no 1 , 3 by 4 inch gate valve sw 800 3000 api 602 iso 15761 body astm a 105 trim stellied stem 13 percentage cr steel b16.11 sheet no 51002 ibr as per soqr item no 2 , 1 inch gate valve sw 800 3000 api 602 iso 15761 body astm a 105 trim stellied stem 13 percentage cr steel b16.11 sheet no 51001 as per soqr item no 3 , 1 inch gate valve sw 800 api 602 iso 15761 body astm a 105 trim stellied stem 13 percentage cr steel b16.11 sheet no 51001 lock open type as per soqr item no 4 , 2 inch gate valve flange end 150 api 600 iso 10434 body astm a 216 gr wcb trim 13 percentage cr steel seal stellied b16.5 rf 125 aarh sheet no 51302 ibr as per soqr item no 5 , 2 inch gate valve flange end 150 api 600 iso10434 body astm a 216 gr wcb trim 13 percentage cr steel sealstellied b16.5 rf 125 aarh sheet no 51301 as per soqr item no 6 , 2 inch gate valve flange end 150 trim bronze mss sp128 body astm a 395 b16.5 ff 125 aarh galv sheet no 51390 normal closed as per soqr item no 7 , 3 inch gate valve flange end 150 trim bronze mss sp128 body astm a 395 b16.5 ff by 125 aarh galv sheet no 51390 lock open type as per soqr item no 8 , 3 inch gate valve flange end 150 trim bronze mss sp128 body astm a 395 b16.5 ff by 125 aarh galv sheet no 51390 normal closed as per soqr item no 9

CTN :40997030

14 Jul, 2025 NA

Multi City - Multi State

Tender For supply, erection, testing & commissioning of i.20 mtr. long high mast tower hot dip galvanise d flange mounted 20 side polygonal tapered type in 2 sections along with feeder pillar box ii. rcc foundatio n suitable for 20 mtr. high mast tower.iii. astronomical timer panel for each tower iv.200 w flood light lumi naire 12 nos. for each tower, v. 5 core 4 sq mm copper cable 30 mtr. for each tower, vi. transport, cutting, erection of 2 mtr (rly supplied) rly pole 8 nos. for each tower, vii. 6 sqmm (7/19) stainless steel wire rope 2 5 mtr for each tower, viii. earthing as per railway's drawing 03 nos. for each tower. supply & erection of m aterials shall be done as per ser/hq specification attached for high mast tower, astronomical timer panel, flood light luminaire, earthing, control panel etc. gtp & tentative gad required along with the bid offer.ma ke of high mast tower: bajaj / transrail /utkarsh / philips /jindal/ bpp / surya.make of tmt bar: tata / jindal / srmb/ mongia or equivalent make as approved by dee(g)/ckp or his authorised representative. the firm has to submit technical parameters of flood light as per cege/grc's specification no. ser/elec/g s/description/ledflood light/rev-0/oct 2024. make of cable: havells/ finolex/ polycab/ anchor or equival ent make as approved by dee/g/ckp. [ warranty period: 60 months after the date of delivery ]

Steel Pellet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government And Public Sector

Central Government/Public Sector