Get complete information related to latest Steel Reinforcement Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Steel Reinforcement Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Steel Reinforcement Tenders.
Tender For corrigendum : providing maintenance materials to cmd store at apep aluva, vssc - providing & stacking best quality ordinary portland cement (43/53 grade) in paper/ polypropene bag (50 kg) of approved make. , providing and stacking solid cement concrete blocks of following size of approved quality and grade c (4.0), as per is 2185 (part 1), density of blocks not less than 1800 kg/cum, minimum average compressive strength of units is 4.0n/mm2 and minimum strength of individual unit is 3.2n/mm2 , providing & stacking of approved well burnt bricks of class designation 3.5 (minimum average compressive strength not less than 3.5n/sqmm.), providing & stacking 40mm nominal size best quality graded hard granite stone aggregate obtained from approved quarry. note: payment shall be made on stack measurement of material., providing & stacking 20mm nominal size best quality graded hard granite stone aggregate obtained from approved quarry. note: payment shall be made on stack measurement of material., providing & stacking 12.5mm nominal size best quality graded hard granite stone aggregate obtained from approved quarry. note: payment shall be made on stack measurement of material., providing & stacking 6mm nominal size best quality graded hard granite stone aggregate obtained from approved quarry. note: payment shall be made on stack measurement of material., providing & stacking of best quality graded fine aggregate (crushed stone sand produced by crushed hard stone/ rock as per is 383: 2016) : (for concrete) obtained from approved quarry all as directed by the engineer in charge. note: payment shall be made on stack measurement of material., providing & stacking of best quality graded fine aggregate (crushed stone sand produced by crushed hard stone/ rock as per is 1542: 1992, 2003) : (for plastering) obtained from approved quarry all as directed by the engineer in charge. note: payment shall be made on stack measurement of material., providing and stacking approved quality rust remover, cleaning and etching agent (0.5ltr/ 1ltr pack) of approved make or equivalent to cmd store complete all as directed by engineer in charge., providing and stacking two component epoxy zinc rich primer (steelreinforcement primer) (1l/ 5l pack) compatible with concrete repair mortar/ micro concrete of approved make or equivalent to cmd store complete all as directed by engineer in charge., providing and stacking of fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having sun reflectivity index (sri) of 105 of approved make or equivalent to cmd store complete all as directed by engineer in charge., providing and stacking approved quality nonshrink, cementitious micro concrete (25kg bag) of approved make or equivalent to cmd store complete all as directed by engineer in charge., providing and stacking approved quality rapid setting cement based, water stopping mortar of approved make or equivalent to cmd store complete all as directed by engineer in charge., providing and stacking approved quality water resistant polymer additive/ bonding agent of approved make or equivalent to provide improved adhesion to concrete, to cmd store complete all as directed by engineer in charge., providing and stacking approved quality shrinkage controlled, polymer modified fibre reinforced cementitious repair mortar of (25kg bag) of approved make or equivalent to cmd store complete all as directed by engineer in charge., providing and stacking approved quality high strength epoxy bonding agent for new to old concrete and primer for repair mortars to concrete substrates (1ltr/ 1.5l pack) of approved make or equivalent to cmd store complete all as directed by engineer in charge., providing and stacking approved quality heat protecting, fibre reinforced elastomeric liquid applied water proofing membrane (4l pack) of approved make or equivalent to cmd store complete all as directed by engineer in charge., pr
Tender For tender for boundry wall and drain at bpcl kota top - dismantling existing wall , excavation upto 1.5 , excavation below 1.5 , pcc for footing base 1 is to 4 is to 8 , rcc below plinth footing plus pillar plus beam , rcc above plinth pillar , brick mason wall av plinth , pcc on top of bw , plaster 18mm thick , two coat cement primer , two coat cement paint , slogan writing letters 300 mm , steelreinforcement for rcc , concertina fencing removal and refixing , jcb related work , excavation for drain upto 1.5 , pcc drain , brick masaonary drain , plaster 12mm thick
Tender For corrigendum : provn of icu, ot, hdu and allied ancillaries in mh ranikhet. - phase-i schedule a part-i (building work), construction of block of tech building for hospital icu, ot, hdu and allied ancillaries alongwith rcc covered ramp ( g+1) (rcc framed structure) , with permanent specification including plinth protection all as shown on drawings and as specified., construction of block of pump house (rcc framed structure) , with permanent specification including plinth protection all as shown on drawings and as specified., construction of under ground static water tank of capacity 100 kl, complete all as shown on drawings and as specified., schedule a part ii-a (internal water supply) for details refer sch a in pdf folder, schedule a part ii-b (internal water supply), s&f health faucet (abs body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and abs wall hook including making connections and fixed in position complete all specified and directed., s&f brass cp mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all specified and directed., s&f brass chromium plated angle valve, fancy type screwed for iron pipe suitable for 15 mm bore pipes complete all specified and directed., s&f brass chromium plated shower rose with 150 mm long cp shower arm 125 mm size revolving type suitable for 15 mm bore pipes, complete all specified and directed., schedule a part iii-a (internal electrification) for details refer sch a in pdf folder, schedule a part iii-b (internal electrification), m & l for point wiring using 1.50 sqmm size, pvc insulated, unsheathed 1100 volts grade, is-694 single core multi-stranded (frls-h) copper conductor cable in proper colour coding drawn into and including metallic rigid conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed concealed, sunk cast iron or 1.6 mm thick pressed modular steel terminal box for mounting fittings i.e, modular switch / sockets incl cover plate with frame including one continuous run of pvc insulated (green colour) 1.50 sqmm size stranded frls-h copper conductor cable as in earth wire and connecting all metal parts to common earth dolly incl cutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed for the following: -, note: (i) also includes inverter wiring with one run of inverter wire 1.5 sqmm all alongwith circuit also included. (ii) all items used should be isi marked. (iii) cutting chases for concealed type point wiring including making good the same with plaster/putty is deemed to be included in quoted rate by the contractor. (iv) accessories modular metal boxes, cover plate inner & outer is also deemed to be included in quoted rate., (a) one light point point /bell buzzer/ ceiling fan/exhaust fan point controlled by one-one way switch. ( 9 points for lift schedule), (b) one three pin 5 amp socket on same board with other switches., (c) one three pin 5 amp socket on independent board, (d) all as per item no 5.01 above but for two way wiring, (e) all as per item no 5.01 above but point wiring with cable 2.50 sq mm size, with earth continuity conductor of size 2.50 sq mm. ( 9 points for lift schedule), supply and fix high quility led t5 integrated batten tube light 20 watt with aluminium extrusion with frosted pmma/pc diffuser, internaly pre wired of 1.5 sqmm twin twisted flexible cable incl connection with ceiling rose all as specified & directed., supply and fixing led batten light fitting 20w, 220v,with microwave motion sensor based technology with aluminium housing & integrated electronic driver of make havells with cat part no lumilinesmart20wled865pcwh or equivalent make of bajaj/philips/crompton complete all as specified & directed., supply and fix led bulb 9 watt complete all as specified and directed., s & f mccb 4 pole 200 a,
Tender For tender for supply of m16x65 bolt gr.8.8 with spring washer, castle nutand split pin. as per drawing wd-86081-s-61 alt-14item no.09 , mild steel washer inner dia: 20.5 mm +- 0.5mm;outer dia: 26.5 mm +- 0.5mm; length: 10 mm +-0.5mm; thickness: 3 mm +- 0.2mm; gap: 17 mm +-1.0mm , m10x50 long bolt gr 8.8 with spring washer and double nut as per drawing wd-86081-s-61 alt-14, item no.30., m16x80 bolt gr.8.8 with spring washer, castle nut and split pin. as per drawing wd-86081-5-61 alt-14, item no.09, m10x45 long bolt grade 8.8 with spring washer and double nut. as per drg. wd-86081-5-61 alt-14 item no.25., m12 castle nut gr.8.8 with dia. 3.2x40 split pin. as per drawing wd-86081-5-61 alt-14, item no.10, corded small angle grinder 125 mm wheel size of ratings: 900w, single phase, 230v ac, 50hz similar to model gws 900-1255 of bosch or as per, annexure-l, attached., make:, bosch/hitachi/makita., corded small angle grinder 125 mm wheel size of ratings: 900w, single phase, 230v ac, 50hz similar to model gws 900-125s of bosch or as per, annexure-l, attached., make:, bosch/hitachi/makita., hex head bolt m16x130 high tensile, as per drawing: is:1364(part-1)-1992-10.9, coating as per mdts-057, make: rdso approved vendor.
Tender For special repairs to manguli branch canal for the year 2025-26 comprises of earthwork excavation, canal lining, providing and filling murrum, supplying and placing tmt steelreinforcement, providing pcc for levelling course and for all super structure.
Tender For auction sale of depot ferrous scrap - condemned slag scrap from gas cut / laser cut/sheets and plates cut with or without drums & small ferrous pieces, scrap cond. used mild steel shots with or with drums. any other items of above nature which is unusable to icf. location. 1) 20mt ewb area. note: 1. purchaser should survey the item before bidding for quantity, nature of the scrap etc. 2. there is no guarantee for quality and quantity of the materials available in the lot. 3. jcb/crane permitted for loading. 4. gst 18%, any variation in tax or any other extra charges as imposed by central or state government will be to buyers account. ul no: 09 9841 7447 1314 hsn code. 720429.
Tender For corrigendum : construction of shed for material storage at pmdk crc patna - surface dressing and leveling of the ground by available soil malwa including removing vegetation and inequalities detail specification as per annexure a , providing and laying in position specified grade of reinforced cement concrete m20 detail specification as per annexure a , providing and laying in position specified grade of cement concrete m15 detail specification as per annexure a , steelreinforcement for rcc work including straightening cutting bending placing detail specification as per annexure a , centering and shuttering foundations footings bases of columns detail specification as per annexure a , structural steel work riveted bolted or welded in built up sections trusses and framed work detail specification as per annexure a , p and f precoated galvanised iron profile sheets zero point 5 mm total coated thickness with zinc coating 120 grams per sqm detail specification as per annexure a , p and f polycarbonate sheet for natural lighting detail specification as per annexure a , painting with synthetic of required colour to give an even shade two or more coats on new work detail specification as per annexure a , brick work with common burnt clay non modular cement mortar 1 is to 4 detail specification as per annexure a , 12 mm cement plaster of 1 isto 6 1 cement 6 coarse sand detail specification as per annexure a , finishing walls with water proofing cement paint of approved shed detail specification as per annexure a , wiring for light point fan point exhaust fan point 1 point 5 sqmm detail specification as per annexure a , supplying and drawing following sizes of frls pvc insulated copper conductor 3 into 2 point 5 detail specification as per annexure a , wiring for group controlled looped light point detail specification as per annexure a , 32 rating 240 41 5 v 10ka c curve miniature a breaker suitable for inductive load of double pole detail specification as per annexure a , supply and fixing of 22 watt led batten and other accessories detail specification as per annexure a
Tender For supply of tool box portable with tray insert and identification plate d d - steel sheet dd 0_8mm thk is_513 inch gde _o_ 1250mm x 2500mm equals to 327 sheet , steel sheet dd 1mm thk is_513 inch gde _o_ 1250mm x 2500 equals to 48 sheet , steel handle 100mm long x 6mm dia std , hinge 1 1 by 2 inch x 2 inch long x 1mm thk mild steel_std , assy hook latch 1 inch x 3 inch long_std , hasp and stapple 10mm std , blind rivet aluminium 4mm dia x 15mm long_std , brass filler rod for brazing 2_5mm dia x 1000mm long is_1278 , paint primer red_oxide _iron_ , paint enamel og , borax flux for brazing , paint enamel black , finished item wooden tray to be procured through ex_trade as per sample _drg enclosed a1_515_smp_51793_
Tender For supply of annual civil maintenance works at ucil narwapahar township for one year - earth work in excavation by mechanical means hydraulic excavator manual means over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by engineer-in-charge. all kind of soil , filling available excavated earth excluding rock in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. , providing and laying cement concrete in retaining walls, return walls, walls any thickness including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing a 1 ratio 3 ration 6 1 cement 3 coarse sand 6 20 mm stone aggregate nominal size , reinforced cement concrete work in beam,suspended floors,roofs, having slope up to 15 landings balconies, shelves,chajja,lintel,band,plain window sills,stsiarcase and spiral stair case above plinth level upto floor five level execluding the cost of centering,shuttering,finishing and reinforced with 1 ratio 1.5 ratio 3 1 cement 1.5 coarse sand 3 graded stone aggregate., centering and shuttering including strutting, propping etc. and removal of form for a) suspended floors, roofs, landing, balconies and access platform , steelreinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. a) thermo-mechanically treated bars of grade fe-500d or more. , brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in a cement mortar 1 ratio 6 1 cement 6 coarse sand , brick work with common burnt clay f.p.s non modular brick of class designation 7.5 m superstures above plinth level up to floor v level in all shape and size in cement mortar 1 ratio 6 1 cement 6 coarse sand , half brick masonary with common burnt clay f.p.s non modular bricks of class designation 7.5 in superstures above plinth level up to floor v level cement mortar 1 ratio 4 1 cement 4 coarse sand, 12 mm cement plaster of mix 1 ratio 6 1 cement 6 fine sand rate for external plastic are for height upto 10 from grond level in less otherwise stated., repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.mt and under incldingcutting the patches in proper shape raking out joints and preparing and plastering the surface of the walls complete as per directions of engineer-in -charge., neat cement punning. , providing and fixing 1st quality ceramic glazed floor tiles conforming to is 15622 thickness to be specified by the manufacturer of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge in skirting, risers of steps and dados over 12 mm thick bed or cement mortar 1 ratio 3 1 cement 3 coarse sand and jointing with grey cement slurry at the rate 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. , white washing with lime to give an even shade a) satna lime wash on walls with one coat. , white washing with lime to give an even shade old work one or more coats, finishing walls with water proofing cement paint of required shade new work two or more coats applied at the rate 3.84 kg per 10 sqm , distempering with 1st quality acrylic distemper ready made having voc content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete as per manufacturers specification. one or more coats on old work , painting with synthetic enamel paint of approved brand and manufacture of req